Search results: repair

Sort order

2,611 models

P
Printablesguss67

Ethernet | RJ45 clip to secure/repair/fix broken tab

This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install. UPDATE 27/01/2021 Added the 3…

Downloads
21,963
Likes
7,496
Rating
4.84
P
Printablesjan

Cable Repair and Protect for iPhone and Samsung [lightning+usbc]

The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…

Downloads
16,669
Likes
4,370
Rating
4.68
P
PrintablesAtkc001

Repair Buckle All Versions

A buckle designed for easy replacement of a broken one without the need to unstitch your bag. Simple to print and assemble. Recommended materials: ASA or PETG. Supports are required – organic supports were used. Fits: 20mm strap 25mm…

Downloads
6,521
Likes
3,625
Rating
4.8
P
PrintablesJohn Wayne

Furniture hinge repair plate

Body hinge requires widening the hole to 10mm. Door hinge to 8mm. The screw spacing in the door plate is 45mm, and the offset relative to the box axis is 9mm. The screw spacing in the body plate is 32mm. The thickness of the tiles is…

Downloads
5,977
Likes
3,455
Rating
5
P
PrintablesHans Schulz

Fallout 4 X01 Power Armor repaired

The X01 Power armor from here: https://www.thingiverse.com/thing:1284097 Repaired using MeshLab and Microsofts Repair service. Category: Creatures

Downloads
4,380
Likes
423
Rating
4.56
P
PrintablesMici

DUMMY 13 - Frame repair pack

Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 I don't always need a complete set, but just individual pieces because I need to replace parts or want to print parts…

Downloads
3,387
Likes
579
Rating
5
P
PrintablesJohn K

RJ45 Ethernet Cable Clip Repair

These are replacement clips to fix broken ethernet cable clips. The clips attach to the Ethernet cable and replace the broken clip so that the cable stays locked into an Ethernet port. EDIT - For some reason Simplify3d doesn't like this…

Downloads
3,234
Likes
1,110
Rating
4.79
P
PrintablesGunter

RJ45 Ethernet Cable Connector Repair

This design is a unique combination of the short designs, where the latch is fixed at the connector and the longer designs, where the clip is mounted to the cable behind the collet. The design considers the exact dimensions of the collet…

Downloads
2,946
Likes
1,272
Rating
5
P
PrintablesDusanMerta

Bike repair stand

You can put them on the handlebars in the normal position and turn the bicycle afterwards. They are designed for the handlebar with a diameter of 23 mm . I printed them with 4 perimeters, 15% honeycomb infill, without top and bottom…

Downloads
2,411
Likes
519
Rating
5
P
PrintablesLloyd Keays

Slica dry box for Bambulab AMS fitting the roller repairs suggested by bambulabs

My AMS roller supports cracked. There's a hot fix here from BambuLabs which works great but it means the existing little boxes I printed don't fit anymore. So I made it back from scratch with groove to fit. I also added a little grabber…

Downloads
2,375
Likes
216
Rating
4.97

Screw Organizer Box for Repairs & Disassembly

🧰 Screw Organizer Box for Repairs & Disassembly 📦 Description This 3D-printed screw organizer is designed to help you keep screws, bolts, washers, and small components neatly sorted while working on electronics, machines, or furniture.…

Downloads
2,208
Likes
711
Rating
5
P
Printableshkern0

Button - Parametric customizable OpenSCAD (SCAD) clothes repair sewing buttons

Customizable sewing button for clothing repair. Requires OpenSCAD, BOSL2, and hkern0_scad libraries. Vary diameter, thickness, number of holes, size of holes, etc. 25-01-18: Added 9mm sample buttons 25-01-21: Added 11mm, 13mm, and 17mm…

Downloads
2,175
Likes
520
Rating
4.95
P
PrintablesCarletes359

Ethernet RJ45 repair fix with NO SUPPORTS

Ethernet cable fix which prints WITHOUT SUPPORTS. The layer line orientation aids in keeping the cable in the port. Print settings: layer height 0.2mm 3 thick walls Infill: Does not matter since the piece is too small to even have infill…

Downloads
2,149
Likes
414
Rating
4.53
P
PrintablesTheOvenCook

Swan (Repaired)

Swan, with a small support built in to hold the nose without any extra supports needed

Downloads
1,984
Likes
93
Rating
4.83
P
PrintablesMehStrongBadMeh

Steam Deck Repair Jig Fixed

A functional replica of the Steam Deck Repair jig seen in Valve's Steam Deck Teardown Video . Handy for keeping the Deck stable while upgrading the internal SSD or replacing drifting thumbstick modules. This is a remix of ryohazuki224's…

Downloads
1,960
Likes
329
Rating
4.93
P
PrintablesLenny421

Thailand Buddha - Repaired and flattened

'Remix of https://www.thingiverse.com/thing:2156108/ Flattened via MeshLab, repaired and the file with "reduced" in the name is only 47,7 MB big, the other one is 137 MB and a real mess to slice Print Settings Printer Brand: Prusa…

Downloads
1,940
Likes
114
Rating
5
P
Printablestm108

Ethernet RJ45 Repair

This is a repair clip for your broken Ethernetcable. You can easy print it. The clip makes it possible that the cable does not always slip out so easily when the clip is broken off at the top. To print: you can use PLA too Use supports

Downloads
1,813
Likes
275
Rating
4.62
P

IKEA BLALIDEN / BLÅLIDEN Shelf Bracket Adapter for Glass Cabinet Repair Part 10087158 / 10082805

You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…

Downloads
1,716
Likes
64
Rating
4.67
P
PrintablesDzyn3D

Bag strap buckle tidy / clip - replacement, repair or retro fit any bag (fully parametric!)

After breaking and losing a bag strap buckle and searching for a 3d design to print and replace it, I realised that a fully parametric replacement strap buckle clip thing would be really handy, so I could … retro fit it to fix the one I…

Downloads
1,605
Likes
364
Rating
5
P
Printablestljuniper

Repair Clip for Clothes Drying Rack - 190 Sizes

Repair Clip for Clothes Drying Rack The metal rungs of drying racks tend to snap off after some time, leaving the metal part dangling. This clip fixes that. You will need to bend the rung so that it securely attaches to the clip. The clip…

Downloads
1,601
Likes
1,055
Rating
4.78
P
PrintablesMartin Duhayon

Beats Studio 3 Repair Headband Replacement Part

The Beats Studio 3 headband commonly breaks where it meets the folding articulation. Mine were not spared. May also work for other Beats Studio, Studio 2 and Studio Pro. This was only tested on the Beats Studio 3, for which it is a…

Downloads
1,246
Likes
129
Rating
5
P
PrintablesViktor Fortun

xbox series controller 1914 bumper repair fix

i got really tired of thin pushers on 1914 bumper, that brake in like 5 min of usage. so i designed spacers u can print youself. they fit tight and not tend to break, cuz they are not part of bumper itslef. place seam on the back(up)…

Downloads
1,233
Likes
66
Rating
4.43
P
PrintablesMici

DUMMY 13 - Frame repair pack with runners per part - V1.0

Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 This time I take a different approach to printing the difficult frame parts and use runners not to connect different…

Downloads
1,181
Likes
143
Rating
5
P
PrintablesHeine Sørensen

Auto repair pry bar tool

A little support is needed but comes off quite easy

Downloads
1,141
Likes
96
Rating
4.83
P
PrintablesFlo

Tiptoi Book Binding Repair

Our kids love this books! Unfortunately the pages suffer from the extensive use. Especially the front- and the back-cover get damaged and ripped out by the binding, the cover separates from the rest of the book. Repair Instructions Print…

Downloads
1,133
Likes
65
Rating
5
P
PrintablesMikyner

Flat Hinge repair-plate

This is a modified version of the design for the hinges we have at home. European hinges.

Downloads
1,116
Likes
573
Rating
5
P
PrintablesMlee

K2 Plus Extruder repair

This extruder cover will fix the Creality K2 extruder that the Bowden connector is broken. I printed in ABS. This allows the Bowden tube to pass thru into the Bowden connector of the extruder. You will need one PC4-M10 fitting. 2 M3 30mm…

Downloads
1,079
Likes
124
Rating
5
P
PrintablesAndun_HH

Repair set for broken drying rack with M4 threaded inserts

Repair set for broken drying rack with M4 threaded inserts I saw the repair kit for the broken strings on a drying rack by STxS . I tried it and it fitted for my drying rack. This remix replaces the M4 nut holder with threaded inserts,…

Downloads
1,048
Likes
701
Rating
5
P
Printablespops

Phone / Tablet Disassemble & Repair Tool

Easily 3D Printed tool that is used to remove adhesive between two parts that have tight tolerances between them and are fragile. Most commonly used when removing touch screen from an phone or tablet. IF YOU HAVE A RESIN 3D PRINTER I…

Downloads
1,025
Likes
75
Rating
5
P
PrintablesBP3D

Toilet Flush Lever Repair Kit (Straight & Angled) (American Standard) (No Supports)

All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…

Downloads
1,016
Likes
126
Rating
4.73
P
PrintablesDavid

BMW E46 Windshield Cowl Seal Repair

Cut off the remains of the rubber part on your windshield cowl and attach these printed ones. OEM PART: 51718208483 Mirror the end part to use it on the other side. Print multiple mid parts to cover the entire length. Printed from…

Downloads
944
Likes
163
Rating
5
P
Printablesrebeltaz

AR15 - Repaired, Modified, and Split

Ok... the original model is a beautiful work of art. There are, however, several issues with it. After no replies from the designer, I took it upon myself to repair the model and modify it for my own needs and to suit my own tastes. NOTE…

Downloads
936
Likes
103
Rating
4.75

Rope Bowl (repaired)

I got annoyed the original model by @JamesThePrinter, cool as it may be, isn't manifold so I fixed it.

Downloads
918
Likes
103
Rating
5
P
PrintablesDennis Renken

Snapmaker U1 Toolbox Tray - Repaired & Optimized for Snapmaker U1 Starter Spools

This remix is a technical refinement of the original toolbox tray, specifically tailored for Snapmaker U1 users. Key Enhancements: Fixed Geometry: Repaired 82 non-manifold edges for error-free slicing. Ultra Material Efficient: Reduced…

Downloads
916
Likes
80
Rating
5
P
PrintablesKuki Mini

Ender 3 V2 belt tensioner repair

I recommend printing it in ABS, but PLA and PETG will work just fine. Its designed to be printed supportless, when you print it like a tower.

Downloads
904
Likes
105
Rating
4.45
P
PrintablesTenthrow

Nintendo Switch Joycon Drift repair spacer

This is a spacer meant to be used to repair joy con drift using the method shown in this video: https://www.youtube.com/watch?v=Vid8lIXmZwE Instead of cutting cardboard and that imprecision, you can just print this spacer instead for that…

Downloads
902
Likes
286
Rating
4.76
P
PrintablesCrazyMason

Doom Guy Collectible Figure - Repaired

Had some trouble with the original model printing the helmet visor weird since the external visor is so thin and the model has an internal visor preventing infill from getting to the front of the helmet. Corrected it in blender by…

Downloads
885
Likes
131
Rating
4.86
P
PrintablesAxnarc

Sony WH-CH720N Repair

This is a replacement "wishbone" to hold the speaker as the top part of mine broke, this model is a bit sloppy but works well. There is a steel C clip on the original part you will need it to hold this to the headband same as the…

Downloads
873
Likes
30
Rating
4
P
PrintablesBodo

IKEA drawer support bracket repair - screw-type

What is it? Printed part to connect the particleboard floor of a drawer to its chipboard backpanel. Tested with a repair and enhancement on my 2012 IKEA MALM chest's drawers. Might work for others with the same design too. Why use it?…

Downloads
845
Likes
122
Rating
4.95
P
PrintablesGeorgi

Monarch butterfly (repaired)

Long time ago I wanted to make a realy nice monarch butterfly. The butterfly was printed with PLA 1.75 mm (GD Filament). As I uploaded the colored 3mf file - you can simply swatch the colors as per your wish and simply print it - you dont…

Downloads
844
Likes
62
Rating
5
P
PrintablesmoWerk

Hose Coupler | Water Line Extender | Zip Tie Tubing Repair Connector

Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…

Downloads
836
Likes
339
Rating
5
P
PrintablesPatrik

Ethernet RJ45 repair with snap lock

An ethernet RJ45 repair clip with a working snap lock that locks the plug in the socket. Prints without supports added from the slicer thus it prints quicker and and uses less material. NOTE: Needs to be printed with 3 perimeters (3…

Downloads
817
Likes
66
Rating
4.83
P
Printablesvindolin

RJ45 Ethernet Cable Clip Repair - parametric

Quick fix for RJ45 plugs whose little clip broke off. Because there are so many variations of RJ45 plugs and every one needs a different version of this model, I uploaded a .STEP file and an editable Fusion 360 file where all the…

Downloads
796
Likes
96
Rating
4.93
P
PrintablesDziobaasty

Geekvape Aegis legend 2 510 connector repair

Geekvape Aegis legend 2 510 connector repair

Downloads
793
Likes
16
Rating
4.75
P
Printableschrism

Bicycle / Bike Repair / Assembly Stand

Since commercally available bicycle repair stands are quite expensive, I decided to design one on my own. This assembly stand is supposed to hold your bike in a comfortable position, while you can work on it. I used 53mm pipes and did a…

Downloads
789
Likes
190
Rating
5
P
PrintablesBuildX

#0118 [REPAIR] Dyson Wand Tube Latch <V7 V8 V10 V11 V15>

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** After a few years of great service, the latch on my…

Downloads
776
Likes
96
Rating
5
P
PrintablesGreg M

Sony WH-1000XM5 arm repair

One of the arms on my Sony WH-1000XM5 headphones snapped. This print clamps over the arm, using 3 M3 nuts, and 3 M3 8mm cap screws to hold it together. The arm on mine broke with conveniently ragged edges, so alignment was very easy. I…

Downloads
766
Likes
42
Rating
5
P
PrintablesTreba Ales

Repair mat

A simple mat to help you organize your parts while repairing.

Downloads
753
Likes
240
Rating
4.83
P
PrintablesArczi

2x AA Battery Box for Repairs

Modification of the model by Plutho to accommodate two instead of three AA batteries. This model may need to be customized as needed.

Downloads
717
Likes
81
Rating
4.8
P
PrintablesDuDynasty

Ikea Hinge Repair Plate

The hinge on my Ikea Kleppstad cupboard tore out of the wood. I could not find a repair plate for this specific hinge. The hinge is also used on Billy cupboards in some regions. The hinge part number at Ikea is 109338 and the mounting…

Downloads
711
Likes
392
Rating
5
P
Printables3d uniprinting

Iphone repaired cable and protect Version Good ;)

- preferably nozzle 0.2/0.25 - PLA - NO SUPPORT!!!

Downloads
709
Likes
77
Rating
4.67
P
Printablesanjoze

Door repair kit for BMW E36 Coupe

Each part is about 21cm so it can be printed on almost every printer, rotated 45º. Just print it and glue it with some clips like in the picture. I've used T-Rex but I don't know if it is the right choice. A more detailed Instructable is…

Downloads
695
Likes
82
Rating
0
P
Printablesdodasch

Bike Repair Stand Handle Bar Clamp

Bike handle clamp stand for handle bars, to do things on the fly on your flipped bike. Designed for 32mm handle bars, but should fit on pretty much any size For one set you additionally need: 2x Rubber Band to hold the Clamps on the…

Downloads
690
Likes
95
Rating
5
P
PrintablesFirebrick43

GMT800 Silverado / Tahoe / Suburban / Yukon Door handle repair clip (1999-2007)

This is a repair part for your GMT800 front door arm rest clip. The door switch panel clips into it. The originals are prone to breaking with age and then the switch panel flops around. Print in ABS or PETG for heat resistance. Printed…

Downloads
678
Likes
67
Rating
5
P
PrintablesMrPenguin879

Rode NTH-100 FitLok repair

Quick repair of the outer shell of the fitlok, 4 are included in the print just to fast track prototyping. Remove as needed. I printed at 105% and it was a snug fit. v1 lasted from Nov to May, made a v2, and now that my printer is…

Downloads
662
Likes
22
Rating
5
P
PrintablesLopatka

Toolbox for 3D Printer Repairs

This is a large, useful toolbox for small tools and parts. I use it for repairing my 3D printers because of all the small parts and tools needed. I have several printers that are used a lot. Anyone that really puts their printer to good…

Downloads
652
Likes
64
Rating
5
P
PrintablesParagon

Air Hose Connector Repair 6-12mm

Hi, to download Air Hose Connector Repair 6mm, 8mm, 10mm and 12mm. Connector is my production from the beginning of the planning stage to the final stage, printed, corrected until satisfactory results are achieved, the tested works very…

Downloads
636
Likes
58
Rating
4
P
PrintablesMade 2 Fix

Flat Hinge repair-plate

This is a slightly modified version of the remixed design for a tighter fit of my European hinges. Modified sections are: Larger corner radius Larger screw adjustment clearance Flat middle section (less to print) Update 2023-06-09 Added…

Downloads
626
Likes
185
Rating
5
P
PrintablesDuane

CR-Touch repair

Make a CR-Touch mountable after breaking the fragile mounting tabs. Category: 3D Printer Accessories

Downloads
625
Likes
81
Rating
5
P
PrintablesRylie Pavlik

90 Degree Right-Angle Bracket for household repairs (#6 screws, customizable)

While you are staying safe at home, you might have something break that you'd typically go buy a replacement or perhaps a repair bracket for. (For example, the snack drawer's increased contents and enthusiastic children might result in…

Downloads
613
Likes
67
Rating
5
P
PrintablesDarkSunShine

Opel Astra H Heater Mix Flap (Mischklappe ) repair adapter (2004-2010)

How to diagnose a failed heater flap: There is no hot air blowing from the HVAC in the Astra, First checked the coolant in the engine, if there is none, you might have a bigger problem. Check if the the mix flap solenoid is working by…

Downloads
608
Likes
21
Rating
0
P
Printablesxyz

RFID Chip Repair Case

An RFID chip repair case is a practical accessory designed to address common issues with RFID chips. When a new RFID chip is inexpensive but new one may encounter registration problems, this case offers an alternative. If the side cover…

Downloads
598
Likes
47
Rating
4.8
P
PrintablesDimplyKitten824

phone screen stand for phone repair

I made this to prop up the screen on the iPhone with side opening screens so I can do quick repairs with the screen still attached. you can repair your own stuff using guides from ifixit.com, this keeps your old devices out of landfills…

Downloads
595
Likes
84
Rating
5
P
PrintablesMape

Shooting target repair sticker dispenser

A simple shooting target patch dot sticker spool holder for 11mm and 16mm, 20mm or 40mm dot stickers. These will fit a spool of 1000 stickers. A stacked version has two mirrored sides that should be glued together to form a single item to…

Downloads
590
Likes
81
Rating
5
P
PrintablesDorvoG

Jabra Evolve 65 Headphone Hinge Repair

Printable fix for when the Jabra Evolve 65 snaps between the on ear element and the headband. Uses two M4x10 screws to clamp onto the headband and the on ear element slides into the holder. The printed material is thin enough to allow for…

Downloads
575
Likes
14
Rating
0
P
PrintablesKeen

2 Part Ethernet | RJ45 clip to secure/repair/fix broken tab

This is a problem that has plagued me for over 20 years. I was so pleased to see several 3D printed solutions. Unfortunately the original design by guss67 typically requires supports. To combat this there are designs that print in the…

Downloads
560
Likes
71
Rating
5
P
Printablesrebeltaz

Mermaid Corbels - Repaired

I loved the look of these Mermaid Corbels (I didn't even know what a "corbel" was before I saw these!) uploaded by @darkside501st but when I went to print them, all three threw up errors in Cura, with the left being the worst. The left…

Downloads
540
Likes
143
Rating
4.6
P
PrintablesPlutho

3x AA Battery Box Case with switch Repair

Replacement for battery Box. No soldering or rewiring needed, just reuse the electronics from your broken box. fits the standard transparent battery boxes that come with fairy lights etc. Ersatzbox für Batteriefach für zb. Lichterketten…

Downloads
535
Likes
49
Rating
5
P
PrintablesMcApe

hinge repair

The hinges of our Ikea cabinet were totally worn out and no longer held. This repair part can be attached above the actual hinge with two wood screws each. I do not know if the hinge is an original Ikea part, so you better check the…

Downloads
530
Likes
155
Rating
5
P
Printableskonradmb

Ethernet LAN RJ45 cable plug locking clip repair

Tips: Set PLA temperature to 220℃, even 230℃. Consider using PETG - it's better suited for flexible joints. Try 0.12 mm layer height Scarf joint is required to prevent flexible tab breakage Print on the side with supports to achieve…

Downloads
522
Likes
69
Rating
5
P
PrintablesJimmy21

Backpack Strap Repair Buckle (20mm / 25mm / 30mm)

Is your backpack buckle just one bad day away from total collapse? Don’t wait for disaster to strike mid-hike. Print this repair buckle now and stash it in your survivor kit! Because nothing says “prepared” like fixing your gear on the…

Downloads
518
Likes
290
Rating
5
P
PrintablesJKM

M3 screw washer - furniture repair

Creating a spacer for an M3 screw Spacer for large screw hole Easy and fast printing Printing: Material: PETG Supports: no Orientation: can be printed from both sides

Downloads
518
Likes
12
Rating
5
P
PrintablesCasoManjarate

Phone Screen Repair Clamp

I needed some clamps to hold phones that got screen replacements, so i made this ones. Consists of three parts: “top_part”, “bottom_part” and “screw”. PRINTING: bottom_part (supports required): top_part: screw: POST PROCESSING: I highly…

Downloads
498
Likes
72
Rating
0
P
Printablestyler

Armrest Cover Hinge Repair for VW

This was designed to repair the broken hinges on the center console arm rest cover of a Volkswagen Golf, but if my research is correct, I think it will work on several Volkswagen models including many Volkswagen Golf, Jetta, Beetle, Bora,…

Downloads
497
Likes
44
Rating
5
P
PrintablesMiltonLumky

iPhone USB-C Diagnostic Dock – 3D Printed Repair Stand

Phone USB-C Diagnostic Dock A compact, 3D-printable USB-C dock designed to hold an iPhone securely during servicing, testing and diagnostic procedures. The design focuses on functionality rather than aesthetics. It provides a stable…

Downloads
495
Likes
87
Rating
3
P
PrintablesSpectreGadget

Saturn V with stages (repaired and combined)

The files as is will not load into BambuSlicer. I used IdeaMaker to repair the files and then imported into BambuSlicer to check. After which I exported all the objects to .3mf and .stl formats to use as you will.

Downloads
488
Likes
37
Rating
0
P
PrintablesTim Angus

Hormann HSE2-868-BS Repair

My garage door fob broke and couldn't feasibly be glued back together (again) so I made a 3D printed repair. 2024 edit: (Several people have asked me over the years if I also have the back part of case, or the switch. The answer is…

Downloads
486
Likes
33
Rating
5
P
PrintablesJeffC

RV (Caravan) T-Style Door Catch Repair Kit

Those who have plastic T-style door catches on their RV have more than likely broken the arm at least once. I purchased and replaced my RV's main door catch and proceeded to break the arm on the next trip out. I designed the arms to be…

Downloads
482
Likes
101
Rating
5
P
PrintablesShanold

Anya spy x family Repaired- Mostly

Attempted to make the STL printable. I could get it pritable easy enough but it had Super thin walls and I cannot get it sealed so the printer doesn't see the Hollow inside. I thickened the model enough to allow at least 4 walls. It still…

Downloads
480
Likes
22
Rating
0
P
PrintablesVanessaE

Garden hose repair, 3/4 inch

mildot's original ¾ inch parts did not fit the hose I wanted to use them on (the insert/male end was too small and the nut was too big. The hose in question has a 1 inch outer diameter, and ¾ inch inner diameter with a spiral ribbing…

Downloads
473
Likes
54
Rating
5
P
PrintablesLoboCNC

Guitar Repair Soundhole Clamp

This lightweight, non-marring clamp can be used for bridge or bracing repair work. The truss-work body is stiff enough for the modest clamping forces used in guitar repair. It also features a second leveling screw to help keep the clamp…

Downloads
466
Likes
90
Rating
5
P
Printablesrebeltaz

Toilet Flush Handle Repair parts

-=[ UPDATE 08-26-19 ]=- After about a month of use, the first version snapped it's little head off. I have redesigned this so that it utilizes a much larger hexagon guide pin. This time the hex is a part of the rod and goes into the…

Downloads
450
Likes
37
Rating
4.67
P
PrintablesSIERRASTRIKE

Xbox Elite Controller Series 2 Bumper repair spacers

Bumper contacts get bent from hard use or being dropped. Print these, pop the top on controller and install. These are approx. 6mmx7mmx2.7mm thick. I printed in PLA+, 100%infill, with 8mm brim for good bed adhesion. 6 minute print

Downloads
449
Likes
55
Rating
5
P
Printablesxoid

Zipper slider repair

The model is designed in such a way that it can be put on a zipper without unsewn the ends for the easiest possible installation. Therefore, it consists of several parts. I printed this with ABS, I think PETG would work just as well. But…

Downloads
445
Likes
86
Rating
5
P
PrintablesTailS MeDiA

Phone Repair Stand (Reinforced Remix)

i loved the phone repair stand that DimplyKitten824 made, but i broke 4 of them in a week, so i reinforced it a bit and made the lcd holding arm bigger so it will last in a retail repair environment. This stand is for any phone you open…

Downloads
444
Likes
49
Rating
5
P
PrintablesMaCo_3dprinting

Sony WH-CH720N Left Hinge Repair piece

This was a briliant model of the hinge for the Sony WH-CH720N, but it was only a model of the right hinge so I just mirrored the model to make a left one as well. Kudos to the maker of the original model please go like and download his…

Downloads
442
Likes
13
Rating
5
P
PrintablesBowieinc

Picture Frame Wood Box Assembly Corner Clamp Ratchet Strap Repair Clamp

Needed to fix a picture frame for a family member. Printing 4 of these along with a ratchet strap worked WAY better than I though it would. Turned out Great. Ratchet Pictured is 1in (25.4mm). I assume any strap from ¾" to 1 ¼" (19.05mm to…

Downloads
440
Likes
122
Rating
5
P
Printablesfreedom2000

USB cable repair

prints in two parts then glue with cyanoacrylate glue Category: Electronics

Downloads
438
Likes
50
Rating
5
P
Printablessuit

Corsair HS80 / HS80 Max Hinge Buckle Repair

This component is a small plastic hinge buckle plate that fits at the headband-to-earcup joint of the Corsair HS80 and HS80 Max headsets. It provides essential mechanical support. The original part is prone to cracking, but this…

Downloads
430
Likes
24
Rating
5
P
PrintablesPetr Fojt

Skoda Octavia 2 - ventilation repair - oprava ventilace

Oprava poškozených lamel u zadní ventilace Škoda Octavia 2 Po drobných úpravách pravděpodobně i pro další vozy. V případě zájmu upravím potřebné modely. EN: After minor adjustments, probably also for other cars. If interested, I will…

Downloads
428
Likes
105
Rating
5
P
PrintablesAle Boeri

VW Amarok overhead sunglasses holder latch repair

My Amarok's sunglasses holder didn't stay closed because the tiny piece that acts as a latch/lock was broken. This part is not available as a replacement on its own, and you are supposed to replace the complete drawer/holder. I've then…

Downloads
423
Likes
26
Rating
0
P
PrintablesTobashadow

Glock Stand for repair or maintence

Used to hold a Glock frame or repair or cleaning work, also fits Polymer 80 frames.

Downloads
417
Likes
58
Rating
5
P
PrintablesPeter C

Golf - Divot Repair Tool - plus ball marker holder (with exposed magnet holder)

For the conscientious golfer who likes to fix their ball marks made due to hard impacts with the green surface by their ball so that other players can also enjoy a smooth green surface. Usage Divot repair tool - Ergonomic design with…

Downloads
414
Likes
46
Rating
5
P
PrintablesHephaestus 3D

Prusa Face Shield - Stack ver. repaired for Simplify3D

I had a problem printing it on Simplify3D so I repaired the model. Now you can print it without inner holes and errors. See pictures for details 4 headbands stacked on top of each other Print instructions 0.25 mm layer height 5 top 5…

Downloads
413
Likes
0
Rating
0
P
PrintablesAtkc001

Field Repair Buckle

Description: A buckle designed for easy replacement of a broken one without the need to unstitch your bag. Simple to print and assemble. Recommended materials: ASA or PETG. Supports are required – organic supports were used. Fits: 19mm…

Downloads
409
Likes
207
Rating
0
P
PrintablesMuse sriuboj

Volkswagen VW Golf MK3 trim of steering wheel repair

This is probably a problem in all golf 3. I printed petg, bcs i don't like print with abs. 100% infil. 2024-10 Update. V3 is only longer, V4 and V5 I made it more convenient to print at an angle without support. Inclined at 30 degrees.…

Downloads
399
Likes
59
Rating
0
P
Printableschmeee

VW Center Armrest Repair Latch Clip / Armlehnengriff Drucktaste / VW 807688/c

VW 807688/c - VW Center Armrest Repair Latch Clip Ersatzgriff für Armlehne diverser Modelle aus dem VW Konzern (VW Golf IV; Skoda Fabia,...). For printing rotate the two clips 90° to position them flat on printbed. 2020-05-29: New version…

Downloads
396
Likes
34
Rating
5
P
PrintablesKyyrbes

Bike Work/Repair Stand

This is a bicycle repair stand that I made to work on my bikes when I didn't want to shell out hundreds of dollars for the “real deal". It utilizes off the shelf bolts/nuts as well as 1" square tubing. The neck ratchets to get just the…

Downloads
391
Likes
163
Rating
5
P
PrintablesMichaelKroes

Screen repair clamp

You can use these clamps when repairing for instance an iPad screen and you need to clamp the edges while the glue sets. I recommend using automatic support painting on the C part of the clamp and using organic supports. When printing in…

Downloads
390
Likes
32
Rating
5
P
PrintablesMOD Research

One Blade Repair

Model was Designed for SLA Supports Recommended Detailed Layer Height FDM May Be Used (Supports Necessary, Rotate Model to Avoid Bridging)

Downloads
389
Likes
72
Rating
0