818 models
Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
⭐ UPDATE March 2026: I have decided to change the license to Attribution only, which now allows for Commercial use. Additionally many people have printed this with no supports without an issue. It's your call if you think your printer can…
Print approx. €20.19–€24.67 excl. taxPreliminary estimate for one variant
It's a case for SD cards, looking like an SD card. It fits up to 12 SD cards and 12 microSD cards. There is not much more to say. Materials you'll need 4 Pcs. 8x3mm Neodymium Magnet Adhesive (e.g. Epoxy) No MMU required? If you want to…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for PETGSource material: PET
The Pac-Man & Ms.Pac-Man Custom Coaster Set! Featuring the iconic Pac-Man maze and the four varying Ms.Pac-Man mazes! You can always get creative and use different colors to make the alternate colored mazes. ie. Pac-Man Plus, The…
Print approx. €3.49–€4.26 excl. taxPreliminary estimate for one variant
Recommended print settings: Material: PETG Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled. As seen on Jelle Romers video: And article:…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
24 August 24 - Working on a new version! If you're planning on printing these and this message is still here, please message me so I can make the newest model available to you. Will get them up here as quickly as I can. New Model Added! 1…
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for PETGSource material: PET
Togepi - Pokémon themed egg cup Print yourself this cute little egg cup - split into seperate parts so no MMU is required. The egg holder works with medium sized eggs, may scale up in the slicer to hold larger eggs. Instructions Print…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
A turn table for 3D scanning. No motors and no bearings are required. I used PETG. You can print all parts with standard settings, and you don't need to put support. Assembly Insert the bar into the base. The longer hexagonal rod is for…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
This is a Lego Duplo compatible 2x4 Block, which can be printed without support. Thanks to your comments I tried to improve the brick to better integrate with original Duplo Bricks. I also tried smoothing the edges, but in case you still…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
This is a shooting target device with three targets intended for use with the print-and-play “Elastic Eagle MKI”. This target stand features a reset lever, so you can easily reset your targets with a gentle push! And just like the…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
I was inspired by Mr.Baham to make a USB mount that didn't require any hardware. This mount will snap fit into the 3030 extrusion. It works best if you stick one side in and lever it into place (it's a tight fit). You will need a USB male…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.4mm between objects - will not scale down well Print…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
This is a thumb rest designed to fit on a Fender/Squier Jazz Bass or similar. It won't fit on a Precision due to the hole spacing being different. Since it uses the already existing pickguard screw holes no drilling is required. The…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
Printed with PLA and a .4mm nozzle. Included are BOTH gcode and .3mf's. Enjoy! The color changes happen pretty quickly. Color changes go WHITE - BLACK - Red.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
This was inspired by "PL", who made a nice bevel gauge. But it got me wondering if it were possible to make one that did not require any additional metal screws. So this is not so much a remix as a complete new design. I am very happy…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Printed at .2mm layer height.
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
Modified original, making sides symmetrical. The original has different dimensions on each side. Optimized for Inmotion V10(F) - shorter and narrower. You can freely stretch the width of the model to fit your EUC. You can not stretch the…
Print approx. €4.16–€5.08 excl. taxPreliminary estimate for one variant
Simple Bottleopener, PLA, no coin or insert required, G-Code for Prusa i3 mk3S+ is added. Lasts quite a while even without a metal insert.
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
YOU MUST SWAP SOME WIRES FOR THIS TO WORK!!!! THIS FILE USES A CUSTOM FONT: HELVETICA NEUE (similar to prusa font) Install it before opening FILE!! THE MODEL WILL WORK IF YOU CHOOSE TO KEEP THE SPRINGS IN THE SENSORS AND NOT ADD MAGNETS I…
Print approx. €4.44–€5.43 excl. taxPreliminary estimate for one variant
These cubes continuously rotate around each other, while staying parallel to the x,y axes. No hardware is required. This project is the result of my study of non circular gears. PDF download:…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Required hardware The Prusa Mini/Mini+ or General EU-3030 aluminium profile . Buy the Original Prusa Mini+: https://shop.prusa3d.com/cs/66-original-prusa-mini No T-slot nuts or screws are needed as the design uses side tension to hold the…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
This model is for printing the flag of Colorado. You can print this using only manual color changes at different layer heights. Start printing in Blue make switches to White, then Red and finally Yellow. The switches are at layers 19, 23…
Print approx. €4.67–€5.71 excl. taxPreliminary estimate for one variant
This is a simple two color print for the flag of South Carolina. Start printing in blue and switch to white at layer 16 (0.2mm layer height). See the included gcode if you don't know how to layer switch. Let me tell you, tracing out that…
Print approx. €4.48–€5.47 excl. taxPreliminary estimate for one variant
General A nice two-color pendant version of the famous Buster Sword. Based on an original model by Jesse Baumes , released under CC BY-NC 4.0. Credit him if you create a derivative work from this one. I've made several modifications…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
A tiny simple hinge for parts no supports necessary use filament spools plastic as a hinge
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
A piece of bread/slice of toast which can be printed using multiple colors using manual filament swaps at different layers
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Model is a 25mm coin with Recycle triangle <1> and PETG on both sides. Each coin consumes 40 cm of 1.75mm filament using a 0.4mm nozzle sliced as Prusament PETG. This print is useful for consuming the end of a roll that is too little to…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
This is a model of the Ohio state flag. To print this with the appropriate colors, start with white, switch to red at layer 16, then blue at layer 19 (0.2mm layer height). See the included gcode if you don't know how to layer switch.
Print approx. €3.64–€4.44 excl. taxPreliminary estimate for one variant
This is the flag for the city of Washington D.C. Fun fact, I found out that the flag's official dimensions are a bit longer then a standard flag. At my usual scale it would not fit on the Mk4 build plate due to the length. So I have…
Print approx. €3.44–€4.21 excl. taxPreliminary estimate for one variant
Print without supports :] Initially I wanted to make the model much wider and diverse but I realized it could be a long print and I minimized the print space and use for supports. Also included an optional removable box to store mini…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
If you have the Prusa MMU upgrade you should be able to use it on this model. (I think, I never actually used it) If you don’t (just like me) you can still print this model, it just takes a bit more work. (The idea is that we split the…
Print approx. €0.03–€0.04 excl. taxPreliminary estimate for one variant
100x160mm sign, reading “Facts do not require Faith” with art of a person holding a bullhorn. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames ,…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
I increased the clip dimensions to allow for the thicker edge that I wanted it to slide onto in my Mustang Mach e. I also designed a slide on cover for aesthetic reasons. I printed the bin with a .6 nozzle to shorten time to print, but…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign, with a warning from The Mgt. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames, which fit all of my signs . You may wish to observe…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant
Modeled from scratch, inspired by lwx007's design: Thingiverse #5685812 I saw some comments about difficulties with the original model requiring assembly or gluing, and decided to make a model that can be printed in a single piece and…
This cat paw-shaped stress-relief clicker features a 3D-printable spring , allowing use without a keyboard switch. However, we strongly recommend adding a keyboard switch for optimal clicking performance and tactile feedback. Key…
Model Updated, addressing all the issues with this STL. Please check out the link for the NEW VERSION: https://www.printables.com/model/686627-new-version-ayodhya-ram-temple-no-supports-reduire Print Model Description: This Hindu temple…
Thanks for all the valuable feedback that I got on my miniature vice: https://www.prusaprinters.org/prints/53471 This feedback has helped me to improve the design more and more, with additional upgrades and modifications that make it…
Radius Caliper with no computation required. What you see on the screen is the measured radius. I see a lot of design of radius gauge/caliper but they all require you to calculate the radius based on the measured value. But as an engineer…
Updated version of the MKI which fixes some issue with slicing, tolerances for easy print etc. Introducing “The Elastic Eagle MK II” - This is a rubber band pistol that doesn't need any assembly. I found many 3d printable rubber band…
I wanted to store my M18 batteries mounted to the inside of a drawer with the tools they power and not dig to find one. Unlike other M18 mounts, this model keeps the battery secure simply through friction, the battery does not "click"…
Cute articulated Dachshunds from https://www.thingiverse.com/coyotelc 3 lengths available from short to super long. Print-in-place. If your printer can do fairly decent overhangs, then supports are not necessary. If you like this model,…
This is a modified cable chain end mount for the Ender 3 V2, allowing the chains to be mounted so they run nicely parallel to each other and the printer. I've also added all the other bits you need to print a cable chain for the Ender 3…
Looking for a viking axe, but not wanting to deal with glue or non-printed metal screws? Search no further :) All elements printed with 20% infill and no supports except for the axe head which was printed top facing down with supports…
This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…
I have had this idea for a ‘fried egg’ fidget fabric/drink coaster for a little while. I loved the idea of using mesh fabric in the fried egg to give it flexibility and make it feel more ‘egg-like’. The egg shell with the magnets is a fun…
Credit where credit is due. I made this model based on a short video from MakeBreakRepair 's youtube channel about it. *NOT MY VIDEO* Thought it was a cool neat weekend project. Managed to get it no hardware required by using print in…
Well I finally got around to doing this new much requested version of the Ayodhya Ram Temple. I did the first version when the schematics were made public in 2019 at the Kumbh Mela in Prayagraj. Now as the temple is due for inauguration…
The height of the lift table can be adjusted with the lower wheel, the angle with the middle wheel and the Fractal Vise can be tightened with the upper wheel. Print Settings & Quantity: I printed everything with a layer height of 0.2mm.…
I printed the spool winder by V3 Precision as had a couple spools that were not working well in the AMS. Although it worked and uses no fittings other than the screws to hold it down, it didn't respool as I expected. I had to touch the…
This is a remix of the '7 inch LCD Case' by arrowmeiwaracing, which can be found here. I was looking for a case for my Elecrow 7 inch LCD screen to be used as a touch interface for my Octoprint server, I came across the original by…
Another super satisfying spiral passthrough fidget toy - this is The Pawn Spiral Passthrough Fidget Toy, a super easy-to-print spiral passthrough fidget toy! Printing It No supports are required! A Quick Note: These fidgets take hours to…
You've got a thing. Now you need a box for it. But designing boxes is so tedious. You have to get the hinges right. And the latch has to be right. And it all has to fit together, and be proportionate, and that just sounds so much like…
Update (27 March 2025) - Uploaded a new thread only (no sides) universal spool holder axel at a user's request. This allows you to use two female ends and adjust to any size needed. See the "Drybox Axel - 50mm Universal Threaded (Male,…
***This is a model of the original hexagon shelf but scaled to 80%*** ***The Left and Right Grill files are also scaled to 80%*** This shelf allows you to mount it directly to the Skadis pegboard system Using the T-clip mounting system.…
This model makes use of Bambu Lab's Lamp Kit , but should accommodate any light source you have available to you If anything could ever make you wish you could shrink down and live in a small house, this certainly would! Light up your…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Padlock, 100% printable with skeleton key, no hardware…
Minecraft Lettering Made this as a present for my nephew. Filament changes can be done layer based, so no MMU required . All pieces can be printed as aligned and without supports. Instructions: Pick all letters you need an print them.…
Product Description: Introducing the Pull Copter, a 3D printable toy for kids and kids at heart. It comprises just three parts: the pulling rod, the propeller (or spinning top), and the base. There's no need for assembly—print, play, and…
I found the original hinge design was really hard to put together and broke more often than not. I remixed the original design to have a print-in-place hinge system which is essentially a hidden, floating pin inside the hinge and allows…
Uploader comment: This is not my model, and is a reupload. I found this fantastic print-in-place Chinese folding fan and its stand hiding deep in the Thingiverse. While it is made for the year of the goat, I think it still holds up well,…
No need to run to the store or browse amazon for this one - just some glue and filament hold it together. Smooth operation. Easy and quick upgrade. Long lasting. No belt wear. Increases belt's grip on pulley gears. Clips to the top rail.…
Remix of https://www.printables.com/model/42109-bike-wheel-truing-tool Redesigned wheel truing tool for bike with w dovetail between two main parts to eliminate a need for gluing parts together. Can be used to trim the front or rear…
Found 2 Duplo slides on Thingiverse, but none seem to resemble the brilliance of the original I saw on pictures online: that you can connect it into an endless slide. I used the models to get the connector positions right, but redesigned…
Chubby little bee (No MMU required)
I have made the front wing from the FIA 2026 Formula 1 car so that you can easily print it in one piece.
Please give it a 💖 if you like it 🥰 🪧 My Kobra 3 slicer profile 👉 https://www.printables.com/model/1019343-anycubic-kobra-3-combo-slicer-profiles-for-anycubi You can get a second Ace Pro there: on Geekbuying 👉 https://kgy.yt/ganyacepr on…
A remix of two different models combined to make a lower Z ribbon cable guide for your S1/S1 PRO. I wanted something where I didn't have to use any screws/nuts to attach to keep the lower Z ribbon cable in place. I found two models that…
Introduction Follow the simple tutorial to attach anything to your Honeycomb Storage Wall. Or if you know how to use CAD software, download the STEP file and design your own. There are Fitting bases optimised for printing on their side,…
A cute and slightly mischievous creature with long ears and a cheeky smile that has captured the hearts of collectors worldwide. Now you can 3D print your own Labubu! The highlight of this model is the realistic fur texture, created with…
I wanted to create a filament savor for the Qidi Box that doesn't require using any double-sided tape. I used ASA GF for mine. Materials needed- m3 Heat Set Inserts- 2 per filament savor m3x6mm socket cap screws- 2 per filament savor PTFE…
I printed in PLA. I would use supports next time.
We designed this print with screw holes for the hooks, such that the mounting screws hold the mount together. This means that the design does not need to be glued together. If you would like to buy the Sonos One Wall Mount , you can check…
Here’s a fun little illusion piece I designed—looks like a bright puddle dripping down the edge of your shelf or cabinet. It’s a single-piece print that creates the effect of spilled paint, slime, or wax frozen mid-drip. I printed mine in…
In our house, we loathe wasting money on liquid detergents that cost as much as a box of powdered detergent, and clean half as many loads. This dispenser was designed to hold our detergent in a closed box to alleviate some of the humidity…
Pac Man Key Holder No MMU Required Print instructions Pac Man Key Holder No MMU Required. Keep your keys together. No MMU required. Sliced in PrusaSlicer with Multilayer color change. I use the ironing on all top layers. Printed in PLA…
Fun flexi fidget in the shape of a pizza slice, if you print 8 pieces you can have a pizza in scale 1:1 At layer 4 pause and enter Polyester Mesh Fabric (Mosquito Netting) Commercial License Do you want to sell prints of this model? You…
3D printed long reach pliers V4. The pliers are designed by me and a remix of a model that I posted. The earlier model required an M3 bolt and nut, this one has a "twist and lock" d esign Print instructions infill I printed with 20%…
This is a simple lock box with 3 digits. Dial in your combination and unlock by pulling the lever to the left. Setting combination Combination cannot be changed after print. But to create your own combination: Open the .blend file with…
Prevents dust and filament debris from entering the Z-axis holes, protecting the mechanism. Three guards are required per printer. If printed in a textured sheet, the guard is almost invisible. Key Features: Protects Z-axis: Prevents dust…
My original design for a fairy wand for my daughter
A simple baseball hat hanger that uses a gentle curve instead of a single hook so the hats look nice on the wall. The gentle curve that the hat hangs on fits the back strap of the hat so that the hat remains in its natural position when…
A 3D TWITCH logo that can be printed in multiple parts and colours then snap fit together. No MMU required. Great for a stream background or desk accessory etc.
A PET bottle organizer/dispenser for Ikea Kallax. I tested with 500ml bottles and it could hold 6 bottles in total with no sagging (3KG total) without using any glue. Print settings: 2 walls, 15% grid infill. Printed standing on core XY…
Easy to print: 12 pcs (count of prints in name of files) Without any supports and bridges. Material: ABS or PETG (pay attention to the shrinkage of the plastic to prevent gaps) Easy to assemble: 1. Fix pairs of angles with M3x16 on top…
Customizable Dummy Battery (AAA, AA, C, D, user defined)(Remixed) Original author by Eansdar https://www.thingiverse.com/thing:2650806/ Remixed by mofosyne to print as one piece avoiding overhangs, as well as improving tolerances and…
Looking for a medieval morning star flail, but not wanting to deal with glue or non-printed metal screws? Search no further :) All elements printed with 20% infill and no supports except the screws work better with 30% infill and the…
Prints in one piece - no assembly or screws required. It slots onto the right-hand side of the Joolz Air+ stroller where there is a little notch, as shown in the video. It rests on the bar, not the notch, so it should be pretty strong.…
New design, assemble your cyber dragonfly, and we recommend using color printing! We have separated the wings, so if you have a multi-color 3D printing system, you can try combining the model for printing. We recommend using a body with a…
Tired of tangled measuring tapes? This winder fixes it once and for all — and it does it ridiculously smoothly . 🎯 WHY YOU’LL LOVE IT 🌀 One-finger rewind Thanks to the 608 bearing, it spins with almost zero resistance. 🧠 Smart flexible…
Add fine details to your creations with this high-precision mini stamp set, designed specifically for clay work and detailed impressions. These stamps are perfect for ceramics, pottery, air-dry clay, and polymer clay , allowing you to…
Spooler axis remix for the original design from Miklos Kiszely
A set of classic chess pieces designed to be printed without supports. They scale to most sizes you might want. Printed my set on 0.16 layer, 0.4 nozzle. Cross for the King's crown needs to be printed face-down. It's a snug fit so it…
Intro I already had some Silk Gold PLA and was able to fine tune it for ring shapes. So I tried using slicer based “painting” to change Jéjé's model to print a light yellow color for the letters and the gold for the outer area. It sort of…
INFO: The OpenSCAD model uses the "Libertation Sans" Font in Bold. If it is not present on your machine you can easily install it by either having LibreOffice installed or getting it here:…
Pyramid Painters Cone - Stackable - Scalable in size and requirements Painter’s pyramids for creative projects Lift your project off the work surface while coating, gluing, or finishing. The pyramid shape stays stable and touches only a…
Thanks for the original by Paul Aughey. I have altered the original model for 3D printing optimization by making the top of the lid solid so the model can rest directly on the print plate. This means no support is required. I have only…
Another Funny Sign - "It's not my fault you thought I was normal, you've have more than enough time and plenty of clues to Figure That Out", multi colour print, printed in ZIRO PLA Twinkling Black and Sunlu Matte white PLA. For more funny…
Manage your cables with that cable management spine. Remix of Scott's Cable Spine. I enhanced the way it could be printed to ensure no supports were needed. The link is now in 3 parts ( Link_1 * 1 and Link_2 * 2 ), this way you can print…
![[Updated] Duplo compatible building block 2x4 - no support required](https://media.printables.com/media/prints/40100/images/396470_8dd32ff6-0f98-442f-bdc1-2c9fefd11cd1/duplo_2x4-v3.png)
![Final Fantasy VII - Buster Sword pendant [2-color, gluing required]](https://media.printables.com/media/prints/9c57b357-c8fe-4be9-bb81-2f36aaaaaf81/images/10264395_ca46bf2c-ce37-4513-98b8-47618cb74c0f_18b94911-5949-4bb3-8488-32dc55a6317d/dsc02367.jpg)
![[New Version!] Ayodhya Ram Temple - No Supports Required! Easy Print!](https://media.printables.com/media/prints/686627/images/5447169_6ce2d9fa-afe5-4c69-b8ff-a22d07ec5574_eb450b61-621b-4393-94a1-076cdae91e18/vfrt1.jpg)
![[V2] Super ergonomic raiser for K1/K1C (.f3d required)](https://media.printables.com/media/prints/878138/images/6734310_fe81ae9d-091b-4a21-9454-e63d316f981f_bf0f9397-53b7-4ba2-862b-c8c60dc39eb1/123.png)
