223 models
Boomerang - Perfect Return A simple yet precisely engineered boomerang designed for a flawless, consistent return. Features two variations—with and without an insert—allowing you to achieve a striking 3D visual effect on the front surface…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
A small, simple standee for the Battlement Tokens. Allows for greater visibility while occupying less space in the region. Recommend Prusament Oh My Gold (Blend) PLA to match the Archwright Hero Board.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
1.- Motivation As with all prints I do, all start or from a need or a lust-to-have. The model was designed to be a return key holder for the 5 rooms rented by my workplace for us in a shared workplace with other companies, therefore there…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
The openSCAD file is privided. Parameters can be set at will to generate variations on the basic design. Two base “forms” are included, one with the magnets embedded on the outside and one with magnets hidden slightly beneth the surface.…
Print approx. €5.79–€7.07 excl. taxPreliminary estimate for one variant
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
The Boomerang V5 – Light and Fast Returning is the latest refinement in an ongoing boomerang design series, tuned for maximum distance and a quick, reliable return. Weighing in at under 10 grams , this three-bladed boomerang achieves an…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. Supports…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. The model…
This is a fast returning Simple design boomerang, that is durable and should be thrown at 35° to 45° Printing: PLA or PETG
Simple reminder for your coworkers or friends who you share tools with to return the damn tools.
The paddles I've created differ slightly from the design that I Remixed. These paddles use bearings for less friction, and the return tension is created with magnets instead of a spring. I have uploaded a PDF with step by step…
These card boxes have been modelled after the "Return To" expansion boxes published for the Arkham Horror Living Card Game. Fantasy Flight stopped publishing these boxes a few campaigns back, so you can use these to complete your…
My students have been borrowing more of my pencils lately and are forgetting to return them. I am hoping this little reminder print will get more of my pencils back in their container at the end of class. "PLEASE RETURN THIS PENCIL" may…
Funny Sign for bathroom of small business. Printed with two PLA Filaments. Color change at Layer change can be performed with almost any printer.
This yoyo features an automatic return mechanism. When you throw the yoyo hard enough it will go into a “sleeper”, centrifugal forces push the clutch mechanism apart and release the axle. The axle can then spin freely. When the yoyo slows…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Remix of the original file created by matthewpatt on Thigiverse(Link Below). I added a ramp for the unit. Recommend printing 10% infill and .3 layer height. File is broken out into multiple pieces for smaller printers.…
Large Waterbox aquariums (like Reef 220.6) have DN220.6 return nozzles. Metric locline components are hard to find. This part replaces the screw in locline adapter with an adapter with M20x2 threads to ¾" locline.
if you miss the hole the ball will roll back to you
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
this is a simple prototype of the shaper mechanism also called quick return mechanism, it is designed in Solidworks for a first-year mechanical engineering course. if you want to make this model you will need a full rotation servo motor…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I know, just another lock, but I wanted one with a spring return. I also like things that I can manipulate. I couldn't find exactly what I was looking for, so I made one. Maybe someone else out there needs one like this, maybe not. The…
This is a very minimalistic insert for the "Return To"-boxes of the Arkham Horror LCG with flippable dividers. I decided to use thin walls and holes for the dividers insead of making thick walls with slits. The dividers are flexible…
Chuck with automatic return. you need : 3 pins Ø3x20 1 pin Ø2x6 1 M6x20 chc screw din 912 Mandrin avec retour automatique il vous faut : 3 goupilles Ø3x20 1 goupille Ø2x6 1 Vis chc M6x20 din 912
This is a “will return at" sign with an analogue clock face to inform visitors when you'll return (e.g. to your work place). Also known as “return sign”, “back soon sign” or “be back note". It can be placed on a horizontal plane such as…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I searched high and low for a 90 Degree return jet for my pool, couldnt fine one, so here is my design. I was having issues where my pool would collect leaves and debris in the corners and my return jets wouldnt clear them out. Here is my…
This is an insert for the board game Return To Dark Tower. This insert supports Alliance and Covenance expansions (and 4 small miniature towers from the Dark Horde expansion). To be able to use this insert, you might need to either…
This is another purge chute, but with a twist. I have my Bambu X1C printer on a wire shelf unit and did not want to have to deal with the purge scraps behind the wire shelving unit. There is not a lot of space behind the printer either to…
this is a quick return mechanism designed by Whitworth in the 1850's Cyclical motion is converted and the downstroke is faster than the upstroke https://youtu.be/CCfre2TgeTk For this design I have incorporated a small gear motor and it's…
I REALY hate games with large numbers of plastic bags to keep everything separated. Instead of dumping all the remaining pieces into the recessed tray I created an insert to hold everything. I don't have the expansion so there may be more…
Für die Solaranlage, damit bei Pumpen-Stopp nicht das ganze Wasser aus den Solarmatten ausläuft. For the solar system, so that when the pump stops, all the water does not run out of the solar mats.
The center of gravity is slightly more in closed position, which means, the back valve can be fixed in vertical position. Can be installed in horizontal position as well. In vertical position, you may need to add some weight. I glued a…
Recent direct drive extruder printers mount the spooler for the filament spool on the cantilevered top (as is the case with my brand new Elegoo Neptune 3 Pro that arrived with the new year!) This constructive choice exposes the entire…
A key isn't just a piece of metal to unlock doors. It's a portal, a promise, a whisper of magic. You hold in your hand the very key that unlocked the Land of Oz for Dorothy (well, it got her into a room where she met the robot Tik-Tok).…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Border that encircles the game board to prevent skulls falling out of the tower from rolling off the board. Has a lip that goes underneath the map board for stability. The design also has small indents on the ends for neodymium magnets,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
"A Simple 3D Printed Whitworth Quick Return Mechanism" is another model I designed for a mechanisms class. The motor used in this model is an N20 60RPM 6VDC gear motor powered by a 3VDC battery pack, thus the motor runs at approximately…
I like the size of the new box a lot, but on its own, it's still not much of a storage solution. That's why I came up with an insert that fits into the box and has 18 slots for as many dividers as you need. It fits sleved cards easily and…
Taking inspiration from the pages of the comic books, here comes a nifty looking and dangerous sniper rifle for Perceptor! This should allow him to take down the cons accurately from afar. Sporting a standard 5mm handle and a little bipod…
Fits 20mm returns by default, but can be scaled accordingly. Printed in TPU at 10% gyroid infill with 2 wall loops.
Quick concept for one person on reddit, dimensions are probably not perfect and design is definitely not polished. Idea is to have the hoop connector hanging with straps from the hoop and the net going inside of the connector. Feel free…
This is a 3D printable solution for your aquarium pump return line - it was designed for a sump-in-tank design where the wall of your sump is ~2mm thick (although thicker should also work) and a pump using a ½" (~12mm) ID return line. If…
This model is an improvement to another design of mine. Features 4-Way Latching Mechanism: 4-way selection knob to set 1) Both ways open, 2) Both ways closed 3) Exit only, and 4) Enter only. Removable latch cover to easily clean out the…
This vent will fit in an opening 220mm x 156mm ( approx. 8.5" x 6" ). We designed this based on a specific need, so it is an unconventional size. A 19mm flange surrounds the vent opening. it is 20mm deep. Since This vent was designed for…
Tombstone + skeleton from the Return of the living dead, this is part of a larger project I will be releasing soon. ; ) Could work well for tabletop games if reduced in scale, no supports needed on tombstone only with the skeleton.
A returning boomerang requires no special settings and has very low filament costs and a short print time. Has Been Tested If you like this model, consider tipping to support Fonn Prints and help us with future models and more!
The modification puts the original phone plate in the phone holder. The locking pin mechanism is the cool feature I wanted to take advantage off and change nothing else. There are two STL's. One is the variation with the original phone…
I broke the clips for the metal support bar during dismantling and decided to design some replacement ones. May require a bit of heat to get the metal bar seated properly and moving fairly freely. Model might need a bit of tweaking for…
NEW AND IMPROVED MODEL: Pet Door with 4-Way Latch & Magnetic Door Return V2 by jabbanman | Download free STL model | Printables.com Inspiration comes from https://www.thingiverse.com/thing:4166823 Features : 4-way selection knob to set 1)…
I love the original Morse Code Paddle / CW Key that K6ARK made. I was trying to get the contact distances closer but had trouble with the pressure from my plastic springs not being enough. With magnetic returns I was able to get the…
Printed in PLA and has been in use for two summers and underwater for over a year without a problem. Allows you to create a fountain by adapting the standard pool return to 1" PVC
Insert for Heroquest: Return of the Witch Lord by Thinguiverse user SBradger. https://www.thingiverse.com/thing:6156546 Printed at 2.0 with 10% infill without problems.…
I had a problem with the soft tubing I used as a return line from the sump of my aquarium collapsing on itself as it hooked over the edge of the tank. The barb fitting is sized for 5/8" tubing, but the .f3d file has parameters to make…
Here's a fun little model of Starscream's coronation crown which has been scaled to fit most Titans Return deluxe figures' heads. This piece has been designed as a c-clip so it can be scaled proportionally (before 3d printing) to fit the…
This is a small accessory for spell return with sharp corners, so don't use it to slash someone.
Remade Tapowe border for a neoprene mat
Return of the Jedi Film / Cinema room sign, Colours can be altered to whatever you prefer through your AMS (Bambu) or through you current printers configuration. Large Measurements approx.: 22cm x 7.5cm x 2cm Medium Measurements approx.:…
0.2 mm layer height recommended PLA 3 color changes, total of 4 colors recommended No MMU needed
Simple stamp if you get a lot of mail for other people. Quick and easy print. No supports necessary. Print Printed with 0.2mm layers in PLA. Works best after light sanding on a flat surface.
Here's the mini Master Sword for Fortress Maximus, which is technically more for Cerebos/Fortress to wield just before his combination sequence! This should be a simple one piece print, which can be done nicely in red and then touched up…
2D Art of the Death Star from Return of the Jedi. I used it for wall art, recommend printing in black.
Adds an auto slide return to the front of the muzzle. This is designed with low hardware in mind. Requires 1 spring from a Retaliator or equivalent Nerf blaster, and 4 screws. I used m3x8 machine thread screws, but coarse thread will…
Simple Printable Wind Tunnel that costs around 60 USD. Uses 1500g of PLA
These are the filter retainer ring for the Valterra A10-3361VP Return Air Vent and the slat connector for the Valterra A10-3359VP. I got tired of having to buy entirely new vents to replace these simple parts. The filter retainer ring is…
Return Key of the Jedi Some many varieties of return and enter keys so I added the .png file. The easiest way to add it to your style of key is in windows 3d builder using the edit-emboss tool. .png with removed background work the best.…
This is my recreation of Luke Skywalker's lightsaber that I ended up making for a 3D printing class in college. It was really cool as a big star wars fan to be able to have the opportunity to recreate one of my favorite lightsabers from…
Hello I made this model to return your ball after you make a shot on a mini hoop so instead of having to go all the way over to where your ball landed you can stay where you are and keep playing. To assemble simply glue all of the pieces…
Hello. For ages, my partner and I kept putting the wrong things in the wrong bins in our kitchen in our new place. We eventually got use to it, but then we noticed that whenever we have guests over, whic is a few times a month, they will…
Check valve for a compressor model to insert into the discharge cooler. Fits into the 55.5mm inside diameter of the cooler. Printing: Separte the 3 parts to put onto buit plate no supprts are needed, but surface finish might improve upon…
MWS Nozzle Return-Spring Retention-Piece Pin Punch assist Block
Had a look at the existing ST:F inserts and couldn't find one which allowed the expansion to fit in the box too. All parts are designed from scratch except for the Tile holder and some aspects of the encounter rows where credit needs to…
A mod to add a USB port hidden in the coin return to allow programming your Ardiuno without removing any panels. Works with Mr. Baddeley's Mark III body. If you have a “Cut” version of the Mark III build this mod will install in the rear…
The flight is very stable, with a fairly high trajectory. The bommerang brakes very well on the return which allows it to be easily caught.
These will hold wave 2 and Return to Hoth expansion for Imperial Assault. you will need 2 of the large card holders.
This organizer is intended to replace the original vacuum formed insert. I use Mayday Premium sleeves (7077, 7100) for all cards, your results may vary. Everything fits quite snug and the lid closes properly. As long as you use the…
A fun 3D printable model inspired by a famous mischievous alien character! This figure comes in a single-color version , so you can enjoy painting it with acrylics, markers, or an airbrush – a creative project that kids will love to join.
The return hose on our Coleman 14' x 42" above ground pool shoots the stream straight out into the center of the pool. Any pool this large (or larger) really should have the return flow diverted to the side, away from the inlet so that…
This is a check valve (one way valve) for filament which can be used eg for MMU applications. Use a ball with 4mm in diameter. You can find one in every 608 bearing. It is meant to be a concept but it actually works very well. The screw…
This Remix allows Bambolab printer owners to use the great idea of @jody to use this return chute with your Ikea Lack Table or any other table with max 50-60mm thick tabletop . Note that you will need both Top and Bottom part as they are…
quickly made in Blender, once again haven't printed it yet and its scaled to Budwin's Sizing Head number 3 you can find Here .
Tired of use pliers to loosen your pool return jet? Then this tool is for you. This remix gives you a lot more leverage to easily remove or loosen your pools return jet nut.
I have uploaded a PDF with step by step instructions. I will create an assembly video in the future and upload it to my YouTube Channel. http://youtube.com/@w1rcp # Per Assy Short Description 2 Magnets 6mm x 2mm 4 M3x8 screw 2 M3x12 screw…
This is an unofficial, fan-made model . The Return to Castle Wolfenstein name and logo are trademarks of their respective owners. This model is shared for personal, non-commercial use only and is not endorsed by or affiliated with id…
Kredit goes to devonjones from thingiverse as OPENLOCK Maindesiger The Tile is Completely new Designed within his rules as a HEALTH or live return Porter !! Attention INCH and Metric USE the SCALE X/Y in the Slicer to get your FIT DO NOT…
This is a set of small targets to be shot at with airsoft guns or really any other gun replica. I have designed only a few shapes thus far, but I hope to add more soon! The base is separated from the rest of the target, so should the…
Secures the U pipe with a cable tie. Raises the U pipe by 2cm.
The image is from the 8mm x 2mm magnet version. I printed test fit parts to confirm that the tolerances for the no magnet version worked good, but didn't print a full set of them since I wanted to use the magnet version.
Episode 6 celebrates its 40 th anniversay. 3D printable model for shelfs and cabinets. Share your prints in the Makes section.
I've recently introduced a lot of new people to RTDT, and on my table, it's hard for some players to always keep an eye on the items available in the markets. Therefore, these stands allow for markets that are better visible to everyone.…
Presentation This new version of the hook is composed of 8 parts: The three new parts: the sleeve, cuff links screw and nut: these parts can be used to hang keys The original parts (the same parts as supplied in the previous design): The…
In my make its sized for 1.5" belts, the buckle itself is just over 2" at the tallest point and 3.5" wide. Found the logo in good resolution online, adapted the outline of a shield for the backing and frame using an image editor.…
Tracking movement and advantage can be a bit annoying in Return to Dark Tower. I also find sometimes player turn can be forgotten with all the things the tower does at times. I made this to pass around to track the current player as well…
I'm working on modifying a Judge Dredd pinball cabinet into a virtual pinball machine. I want to re-use the coin door I got with the cabinet (despite it being bent up), and also use the coin return buttons as “add credit buttons” that…
