Search results: ribs

Sort order

101 models

P

Christmas Ball, full cross ribs

Christmas tree ornament. 6 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 120 g).

Downloads
6,312
Likes
1,362
Rating
4.92
P

Christmas Ball, full single ribs

Christmas tree ornament. 8 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 100 g).

Downloads
604
Likes
108
Rating
5
P

Christmas Ball, full body with ribs

8 variations of Christmas tree ornaments. Single and double ribbing. 3 sizes: 40, 60 and 80 mm. Print with supports on the plate to increase print stability.

Downloads
377
Likes
85
Rating
5
P
PrintablesBingoDesign

Wavy decorate ribs shelf

The wavy decorate shelf is 71cm wide (28in) and can hold up to 5Kg securely. Installation notes: 1. All 6 pieces has their part name engraved in the back 2. Start with the ‘left bottom’ part 3. Connect ‘left middle’ and ‘left right’ parts…

Downloads
1,626
Likes
815
Rating
5
P
PrintablesNozzleSting

45° Winkel mit Verstärkungsrippen für Regale <<>> 45° angle with reinforcing ribs for shelves

(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…

Downloads
1,146
Likes
389
Rating
5
P
Printablesthall72

Lego Compatible (91405.dat) Plate 16 x 16 with Underside Ribs

This model is compatible with the lego system.

Downloads
768
Likes
46
Rating
5
P
PrintablesCartesius 3D

SpongeBob SquarePants Cribs

¡Sumérgete en el mundo de Fondo de Bikini con estos detallados modelos 3D de las icónicas casas de Bob Esponja, Calamardo y Patricio! Estos diseños están listos para ser impresos y son perfectos para fans de todas las edades.…

Downloads
542
Likes
29
Rating
5
P
Printablesthall72
Downloads
398
Likes
44
Rating
4.5
P
Printablesdooney

Ceramic Ribs Tools

My idea was to make various ceramics tools based on the needs of the classroom and the teacher. For all of the ceramics tools, I first did an estimate of what the tools would look like in real life (my estimate was 10 x 10). I sketched…

Downloads
374
Likes
51
Rating
0
P
PrintablesWilliam

Car trunk fixing element (velcro) with 2-3 ribs remix (source files included)

Remixed it with 2 and 3 ribs to have it firmer for heavy load, so I can use less of them. Print it with the holes on the plate (like the original one). Print settings Material: PETG (or any other material that can handle the load).…

Downloads
337
Likes
71
Rating
5

Pottery ribs clay shapping tools

Designed for creating different patterns or finishes on the surface of the clay.

Downloads
331
Likes
96
Rating
5
P
PrintablesKristianLaholm

Pen holder Waves and Ribs

A small desktop organizer. Designed to be printed with a 0,4mm nozzle and 0,2mm layer height. (Wall thickness is 0,8mm) Approx 9-10 hours print time on my Prusa MK3 with add:north E-PLA

Downloads
264
Likes
45
Rating
5
P
PrintablesRicardoSB

Heatbed Cable Support - Reinforced fixings with ribs

I have added some reinforcements to the 3D model because in the first impression they were broken when removing the support. After printing this version, now with these reinforcing ribs it gives greater solidity. Speed - 60% Infill - 15%…

Downloads
189
Likes
22
Rating
5
P
Printablesrapolasp

Pottery rib tool holder #003 (3/5/7 ribs)

I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…

Downloads
182
Likes
19
Rating
5
P
Printablesthall72
Downloads
181
Likes
20
Rating
0
P
Printablesthall72
Downloads
173
Likes
19
Rating
0
P
Printablesjoshua Bentley

Hunting Rifle Scope Sun Shade Long Slash Cut Smooth Without Ribs v3 To Suit 50mm

After not being able to find a design i liked i designed my own sun shade. This is v3 Smooth. see link below for v4 ribbed version. https://www.printables.com/model/525879-hunting-rifle-scope-sun-shade-long-slash-cut-ribbe This was built…

Downloads
172
Likes
40
Rating
0
P
Printablesthall72
Downloads
169
Likes
21
Rating
0
P
Printablestjsoco

pottery ribs - Any shape you want. (OpenSCAD)

You can make any shape of pottery rib that you want. Seven example ribs are provided in file names “rib 1” through “rib 7”. I printed using PLA and the default settings in PrusaSlicer for 0.2 layer height with "Generate support material:"…

Downloads
164
Likes
36
Rating
5
P
PrintablesCajun_Einstein

Apache 1800 Case Ribs

Ribs have been slightly oversized for clearances. Note, the body of this model is round pipes, with a midsection through the Z origin. Your cut operation only needs to be Z+. Does not contain the center badge. Test printed and fit on…

Downloads
162
Likes
8
Rating
0
P
PrintablesZaraOytan

Ceramics project: ribs

Our class created a variety of school improving projects for our ceramics class. Some did roller patterns, spatulas, texture rolling pins, and ribs. I choose to do ribs and talked with our schools ceramics teacher, Mr. Schifone, to create…

Downloads
144
Likes
14
Rating
0
P
PrintablesDecorartor

Kanso Ribs Vase

Introducing the Kanso Ribs Vase —a masterpiece of minimalist design that perfectly embodies the Japandi ethos. "Kanso" means simplicity, and this vase lives up to its name with its smooth, rounded form and delicate ribbed detailing. The…

Downloads
136
Likes
46
Rating
0
P
PrintablespartsMaker

Insulated Can Cozy, With Crush Ribs

I like insulated can holders to help keep a drink cool, and made a 3D-printable version! The main tricky part in designing this was figuring out a way to make the can fit snugly without making it too tight. The problem with making…

Downloads
133
Likes
10
Rating
5
P
PrintablesKristianLaholm

Wave cylinder with ribs, Vase mode.

The design is solid and should be printed in vase mode with a 0.4mm nozzle. If you use a larger nozzle try and scale the model larger.

Downloads
131
Likes
25
Rating
5

"Magpul" like vertical grip RIS (Picatinny) with ribs

Do not print vertically. Print horizontally or as I did at an angle. This is because if printed up right it will eventually break as the forces are horizontal. This remix includes ribs for better contact.

Downloads
129
Likes
14
Rating
0
P
Printablesthall72
Downloads
122
Likes
18
Rating
0
P
Printableskyynkarl

VW Passat B6 blower vent ribs synchroniser

The piece from my Volkswagen Passat B6(3C) front right central vent that adjusts the ribs was missing and I decided to mock up a stl after the left central vent and reverse it. Printed using black ABS and it works/looks like it belongs…

Downloads
109
Likes
26
Rating
0

Thoracotomy Ribs & Rib Holder

Thoracotomy ribs and rib holder. Was used in conjunction with an old CPR manikin for more fidelity, but could be used as stand alone.

Downloads
106
Likes
20
Rating
0
P
PrintablesCosmicNimbus

Ikea PRESSA Octopus Hanger Clip - with ribs and soft teeth

Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus Hi there, I love this clip a lot ! But it needed some ribs so it wasn't so slippery to use on the line. My partner also wanted the…

Downloads
100
Likes
10
Rating
5
P
Printableszep

Parametric Playmat Ring (MTG/TCG) with Inner Anti-Slip Ribs — Split, Squeezed Fit

Keep your playmat neatly rolled and bag-friendly with this lightweight, parametric playmat ring. The split design gives a gentle squeeze so the mat doesn’t unwind in your backpack, while the outer micro-ribs improve grip and the inner…

Downloads
99
Likes
7
Rating
0
P
Printablesluc1d

T-Rex ribs 1-6 X1C 3mf

This is a 3mf file for Bambu X1C to print ribs 1-6 standing vertically at 0.16mm layer height, 0.4mm nozzle, 200% scale. All manual supports/brims are already setup ,as well as variable layer height. I made sure layers never go over…

Downloads
96
Likes
8
Rating
0
P
PrintablesNanaBanana

Parametric cylinder container with ribs

About this model This model was designed in FreeCAD - FOSS (Free and Open-Source Software) 3D parametric modeler. Source file is available. This is a parametric (means you can adjust some aspects of it) cylinder container with a screw…

Downloads
95
Likes
18
Rating
0
P
Printablesthall72

Lego Compatible (79180.dat) Bracket 5 x 2 x 1.333 with Ribs in Centre

This model is compatible with the lego system.

Downloads
92
Likes
22
Rating
0
P
PrintablesKristianLaholm

Pen holder Waves and Ribs - Tri-version

Trianglar version of one of my designs. Intended to be printed with 0,4mm nozzle and 0,2mm layer height.

Downloads
85
Likes
14
Rating
0
P
Printablesrapolasp

Pottery rib tool holder #001 (3/5/7 ribs)

I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…

Downloads
76
Likes
9
Rating
0
P
PrintablesDavid

Eero Pro 6E Mesh Solid Base with Venting Ribs

10% Infill seems to be enough for this model. I printed with Fillamentium White PLA. It seems to fit the Eero Pro 6E Mesh well and within an hour the unit seems to be cooler and the desktop is no longer hot.

Downloads
73
Likes
5
Rating
5
P
Printablesandyroo770

Curved Ribs Pattern Slide Case

A .3mf file is supplied. The 3 files must be separated by the slicer. Print the tray part flat to bed (obvs), print the large lid on the flat edge that meets the tray section end (the other end is rounded, not suitable for bed adhesion).…

Downloads
73
Likes
14
Rating
5
P
PrintablesBen Dansie

Nuroh Gribsek - Head Sculpt

The ever cheerful Nuroh Gribsek. Currently reworking in to a full character. :) Quick bit of weekend fun in Zbrush. Printable without support.

Downloads
68
Likes
5
Rating
0
P
PrintablesBingoDesign

Thin 71cm wavy ribs shelf

A 71cm wide wavy ribs shelf - thin version requiring less than 20 hours of print Requires 3 screws to attach to the wall Can handle load of up to 5kg

Downloads
67
Likes
20
Rating
0
P
PrintablesDazus K

Closed Christmas Ball with Ribs 2025

You can scale this down a lot and still get good detail with a standard .4mm nozzle. At 50%, the loop prints cleanly, but it is very fragile. I used 2 perimeters for roughly the first 7mm and the last 18mm. In between, I just used 1…

Downloads
67
Likes
10
Rating
0
P
PrintablesBen Dansie

Nuroh Gribsek - Master Blacksmith

A highly detailed blacksmith character, requiring no support to print. I wanted to create a character that knew their craft inside out over many years and was satisfied with a happy customer and a job well done. Tested fine with FDM and…

Downloads
65
Likes
5
Rating
0
P
PrintablesNozzleSting

Lasche mit oder ohne Verstärkungsrippen <> Connector with or without reinforcing ribs

(DE) Entdecke Deine 3D-gedruckte Lasche ob mit oder ohne Verstärkungsrippen – die perfekte Lösung für alle Befestigungsbedürfnisse! Mit sechs Kegelsenkungen für Schrauben bietet sie nicht nur Stabilität, sondern auch eine einfache…

Downloads
64
Likes
17
Rating
0
P
Printablesrapolasp

Pottery rib tool holder#002 (3/5/7 ribs)

I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…

Downloads
63
Likes
7
Rating
0
P
Printablesgtorelly

Ribs, the soap dish

I designed this simple soap dish to keep my soap from getting soggy.

Downloads
63
Likes
14
Rating
0
P
Printablesluc1d

T-rex ribs 7-11 X1C 3mf

This is a 3mf file for Bambu X1C to print ribs 7-11 standing vertically at 0.16mm layer height, 0.4mm nozzle, 200% scale. All manual supports/brims are already setup ,as well as variable layer height. I made sure layers never go over…

Downloads
57
Likes
4
Rating
0
P
PrintablesBen Dansie

Multipart - Nuroh Gribsek - Master Blacksmith

A highly detailed blacksmith character, requiring no support to print. I wanted to create a character that knew their craft inside out over many years and was satisfied with a happy customer and a job well done. This remix is split in to…

Downloads
56
Likes
10
Rating
0
P
PrintablesJuma

Umbrella Rib carrier for 6 ribs 38mm beach umbrella

Umbrella Rib carrier for 6 ribs 38mm beach umbrella ( repair old broken umbrella ) print for top or bottom with strings risers for both sides 24x 30mm m3 hex screws each is 12 ( 6 for the rib carrier and 6 to bolt down everything I used…

Downloads
56
Likes
7
Rating
0
P
Printablesmscalora

Vase 108: Twisted Square Vase with Reverse Twisted Ribs

Twisted square tube with counter rotated ribs. Print without supports in any material. Make your own variations using the OnShape link. CADLink:…

Downloads
51
Likes
3
Rating
0
P
Printableskaje

Test Print - Crush Ribs - Version02

This is an additional test of "crush ribs" which I learned about from this video from this video : See also : https://www.prusaprinters.org/prints/43586-test-print-crush-ribs-version-01 Short version : A general solution to the problem of…

Downloads
51
Likes
3
Rating
0
P
Printablesmario3d

clip towel with ribs ribbel

this clip i made little thicker that it will not so much bench when you tight it… also i added a rib structure for keeping the clip in place

Downloads
49
Likes
7
Rating
0
P
PrintablesSergii

3U side panels with plain ribs

Reworked the 3U side panel with 120mm for Natalie T 10" server rack. Plain ribs, more holes + plain panel

Downloads
45
Likes
9
Rating
0
P
Printableskaje

Test Print - Crush Ribs - Version03

This is an additional test of "crush ribs" which I learned about from this video from this video : See also : https://www.prusaprinters.org/prints/43586-test-print-crush-ribs-version-01 and…

Downloads
45
Likes
6
Rating
0
P
PrintablesMaksym Dudkin

Big bin with ribs (vase mode)

Simple big trash bin designed to be printed in vase mode with inner ribs for strength Height: 200mm Outer Top Diameter: 220mm Outer Bottom Diameter: 154.59mm Ribs length: 2mm Ribs depth: 10mm Space between ribs: 10mm Printed with 0.4…

Downloads
42
Likes
0
Rating
0
P
PrintablesSean Bravo

EZPass Toll Tag Holder with Ribs

This is a remix of jsaintrocc's design that is a remix of jimerb's design . Both designs are awesome! I often need to use a rental car for work, but I hate paying the rental company extra for tolls! This toll-holder has made it easy to…

Downloads
41
Likes
4
Rating
0
P
PrintablesDazus K

Open Christmas Ball with Ribs 2025

This is a fun and incredibly lightweight ornament. I've provided my PrusaSlicer project file and GCODE for a Prusa MK3S+ printer. Yes, you need supports - and not just at the base. You need at least 1 row of supports for the arms halfway…

Downloads
39
Likes
8
Rating
0
P
PrintablesVisualReversal

Heatbed Cable Support - Reinforced with ribs added zip tie holes

Simple remix of RicardoSB's remix of INeedOneDesigns' initial design. Added some 3.25mm holes so the cabling can be secured with a zip tie. Printing with support is recommended.

Downloads
39
Likes
6
Rating
5
P
Printableskaje

Test Print - Crush Ribs - Version 01

Just learned about "crush ribs" from this video : It looks like the solution to a problem I have dealt with before, so I had to try it out. I have labeled this "Version 01" as I may be creating additional test models. Short version : A…

Downloads
37
Likes
2
Rating
0
P
PrintablesValentino Hesse

CyberPunk Ring - TheRibs

Ring with motifs of Cyberpunk culture or Steampunk. They are easy to print and can be printed very quickly. The size was perfect for my thick fingers, but they can be easily adjusted. The size of these rings is 20mm diameter. Enjoy my…

Downloads
32
Likes
11
Rating
0
P
PrintablesAsus1357

remix of a remix Car trunk fixing element (velcro) with 3 ribs

I loved the idea though had issues on the first print with a .6 nozzle (petg) dropped to the .4 (petg) and with my settings came out really good. No post processing in these pictures. I also modified the bottom (velcro section) to…

Downloads
32
Likes
3
Rating
0
P
Printablesthall72
Downloads
31
Likes
13
Rating
0
P
Printableskaje

Test Print - Crush Ribs - Version04

This is an additional test of "crush ribs" which I learned about from this video from this video : See also : https://www.prusaprinters.org/prints/43586-test-print-crush-ribs-version-01…

Downloads
30
Likes
3
Rating
0
P
PrintablesGamerGeode

Ribs

ribs

Downloads
24
Likes
1
Rating
0
P
PrintablesdB

Triceratops prorsus Skeleton Ribs Separated

Had difficulty when printing ribs together. Used Meshmixer to separate each rib in the event it may be helpful for others attempting this build. Category: Animals

Downloads
23
Likes
4
Rating
0
P
PrintablesJAR

Emisar D4SV2 Glow in the Dark Ribs

inserts for the Heatsink grooves of the Emisar D4SV2 because it aint got no tritium slots

Downloads
22
Likes
3
Rating
0
P
PrintablesArciello

Wave ribs vase

Sample of wave ribs vase designed with Fusion 360

Downloads
22
Likes
3
Rating
0
P
PrintablesFraser Bean

bolt action pen (no ribs

a bolt action pen uses a 0.4mm nozzle . Print the "Main pen" at a maximum layer high of 0.2mm and with a higher temperature as normal (i printed it with 215c) you will need 1 pen cartrige 1 pen spring 1 M3 screw

Downloads
22
Likes
3
Rating
0
P
PrintablesNathan22211

lego compatible masonry brick generator (with peg ribs)

the 2 previous generators made very small pegs on 1x* bricks. They would break either during printing or when removing from the build plate. I also find that ribbing on the pegs for the bigger bricks helps to prevent them from coming off…

Downloads
21
Likes
1
Rating
0
P
Printableslegrandbleu

Soap Shell Dish - Self-Draining with Raised Ribs

This is my own from-scratch redesign of a self-draining soap dish, created in FreeCAD. Inspiration Inspired by this beautiful design - “Soap dish (always dry soap)” by Vasichkin on Printables:…

Downloads
19
Likes
6
Rating
0
P

Umbrella ferrule for double ribs

The plastic cap, known as the ferrule, is located at the top end of the paired ribs of big umbrellas. These double ribs, which run parallel to each other, provide additional strength and stability to the umbrella's frame. The fabric is…

Downloads
15
Likes
4
Rating
0
P
PrintablesSimplyHong

Sturdyᵀᴹ Skadis Straight Hook with Ribs

Print with 3 or more walls for better sturdiness.

Downloads
14
Likes
1
Rating
0
P
Printablesmscalora

Vase 99: Tall with Wavy Ribs

This is a sleek, modern vase featuring a striking black and yellow striped design. Its unique, wavy silhouette adds an artistic flair, with vertical stripes that twist and curve along the surface, creating a dynamic visual effect. The…

Downloads
13
Likes
1
Rating
0
P
PrintablesMo

BBQ Pin (Queen Of Ribs)

pin or circle that say BBQ Queen Of Ribs!!!

Downloads
13
Likes
3
Rating
0
P
Printablesmail4mail

Box in caseStyle with textured ribs knurling .f3d

Use variable layer height -> NO support

Downloads
12
Likes
0
Rating
0

Clark-Y Airfoil Ribs for TM-201 Belgula UAV

📝 Description Scroll down to the Description box and paste this clean, engineering-focused layout: 🛠 Design Overview High-fidelity Clark Y type airfoil section featuring an 11.7% modified chamber, originally developed as a wind tunnel…

Downloads
12
Likes
0
Rating
0
P
PrintablesPrint2Solve

Tree Support Cap Ø 57mm – Protective Pole Cap with Clamping Ribs

🇬🇧 This functional protective cap shields the top ends of tree supports from rain and moisture, drastically extending the lifespan of your garden structures. The model is specifically optimized for landscaping and outdoor use. Technical…

Downloads
10
Likes
4
Rating
0
P
PrintablesBezbajzlu.pl

Desk Cable Grommet 60 / 80 mm – Flush Rotating Cap, Grip Ribs, No Supports

A clean two-part cable grommet for the hole in your desk, worktop or TV cabinet. The ring presses into the hole, the cap sits flush with the flange and rotates, so the cable slot can face any direction. Two sizes : for Ø60 mm holes…

Downloads
9
Likes
1
Rating
0
P
PrintablesAlanH007

Baby Back Ribs Lithophane

I imported a JPG file into the slicer program, and it generated the lithophane and I sliced it and saved it to the SD card. In addition, I exported the file to my PC as a STL to be able to share the file here.

Downloads
9
Likes
2
Rating
0
P
PrintablesTony Hanma

Soap Dish with Raised Ribs and Drain Spout

Soap dish with 8 raised ribs and a drain spout on one side, so the bar dries instead of sitting in water. 8 ribs 6 mm high keep the soap out of the water Drain spout on the short side 110 × 75 × 20 mm, rounded corners Print settings A1…

Downloads
7
Likes
1
Rating
0
P
PrintablesArthur Both

Dice Cup and 5 Dice - Shaker Cup with Grip Ribs and Rolled Lip, Chamfered Dice with Engraved Pips, No Supports (OpenSCAD)

A tapered shaker cup with grip ribs and a rolled lip, plus five chunky 16 mm dice with chamfered edges and engraved pips (opposite faces add up to 7). Shake, slam it down, peek. Great for dice games like Liar's Dice, Farkle and Yacht.…

Downloads
7
Likes
1
Rating
0
P

Utensil Rest — spoon / ladle / spatula rest with a deep drip bowl, anti-soak ribs and a raised handle saddle

Utensil Rest — Drip Bowl + Handle Saddle The stirring spoon has to go somewhere. Put it on the counter and the counter gets a stripe; put it in a flat spoon rest and the handle still lands in the sauce that ran off it. This one separates…

Downloads
6
Likes
2
Rating
0
P
PrintablesPetr Cimera

Ribbed Ring Cable Holder, Inner Ribs (Ø16–34 mm)

Inner ribs in the ring grip the cables. Ribs inside the ring press lightly on the bundle so the cables do not slide through. Features Inner ribs hold the bundle Prints without supports Detents in both positions Sizes Five inner diameters:…

Downloads
6
Likes
2
Rating
0

Sweet-Ease holder for ER cribs

This is a simple holder for Sweet-Ease infant sucrose solution. quickly clips on to some models of emergency room cribs reduces risk of spill Category: Tool Holders & Boxes

Downloads
6
Likes
3
Rating
0
P
PrintablesLuis Abreu

Ribs the black Black

based on my cat ribs a decoration figurine.

Downloads
5
Likes
0
Rating
0
P
PrintablesVladoKlu
Downloads
5
Likes
0
Rating
0
P
Printablesflorisla

Spray can holder with ribs

Added click-on ribs to the multiboard spray can holder by @moviac. These support the can like @Stefanizam's modification does, but they click in place so don't require glue. I have also changed the screw holes to metric M4 because I use…

Downloads
5
Likes
0
Rating
0
P
PrintablesTimon Dück

Wall Hook XL – Heavy Duty Screw-Mount Hook with Support Ribs

Large screw-mounted wall hook with four support ribs for jackets, bags, towels or tools. Fix it with two screws. Unprinted prototype – please test fit first. Print with the back plate flat on the bed, 4+ walls and 40%+ infill for heavy…

Downloads
5
Likes
0
Rating
0
P
PrintablesTony Hanma

Kitchen Funnel 100 mm with Air Ribs

100 mm funnel with a 12 mm spout. Ribs on the spout let air out of the bottle so it never gurgles. Prints mouth-up. Ø100 mouth, Ø12 spout, 83 mm tall Cone at 48° from the bed: no supports 4 air ribs along the spout How it was checked…

Downloads
4
Likes
2
Rating
0
P
PrintablesRudy

Vase - Wave Ribs

So, this is a pretty simple office organizer that you can also use for other purposes! It has a wave-rib pattern which is really cool to look at! Basically my first time making something with this texture and pattern!

Downloads
4
Likes
1
Rating
0

Din Rail Clips with m3 thread crush ribs or heat inserts

A remix of the already fantastic din rail clip, I had issues with my hardware, ( using small fasteners wouldn't grip the part correctly), so I added crush ribs to help the fastener grip. Also when inserting heat inserts i found the top of…

Downloads
4
Likes
1
Rating
0
P
PrintablesBezbajzlu.pl

Plant Saucer with Drainage Ribs – Pot Stays Dry, 12 & 16 cm, No Supports

A simple, solid saucer for small and medium plant pots. The pot stands on 8 radial ribs instead of sitting in the water: excess water from the drainage hole runs down the channels between the ribs into the ring channel along the rim, so…

Downloads
4
Likes
0
Rating
0
P
PrintablesGreenform Goods

Spiral Geometric Vase with Twisting Ribs for Floral Arrangements

Sharp spiraling ridges wrap around this tapered vase to create subtle shadow lines and shifting highlights from every angle. It holds fresh cut stems or dried florals effortlessly, adding a clean geometric accent to countertops and…

Downloads
2
Likes
0
Rating
0
P
PrintablesArthur Both

Wine Bottle Stoppers - 4 Reusable Stoppers with Heart, Star, Ring and Cat Tops and Sealing Ribs, No Supports (OpenSCAD)

Four reusable wine bottle stoppers with fun tops (a heart, a star, a round one with a ring and a cat) and a tapered plug with three sealing ribs that fits standard wine bottle necks. Good for an opened bottle of wine, olive oil or…

Downloads
1
Likes
0
Rating
0
P
Printables

Apache 1800 Case Ribs

Ribs have been slightly oversized for clearances. Note, the body of this model is round pipes, with a midsection through the Z origin. Your cut operation only needs to be Z+. Does not contain the center badge. Test printed and fit on…

P
Printables

Sturdyᵀᴹ Skadis Straight Hook with Ribs

Print with 3 or more walls for better sturdiness.