Ferrari F-12 Berlinetta Wall Art
Wall Art Silhouette model of the Ferrari F-12 Berlinetta. Adjustable size. I accept model suggestions or ideas to make.
- Downloads
- 130
- Likes
- 43
- Rating
- 5
212 models
Wall Art Silhouette model of the Ferrari F-12 Berlinetta. Adjustable size. I accept model suggestions or ideas to make.
A mini version of the Boeing CST-100 Starliner crew capsule you can use for your classroom. Should be easy to print without any supports. Added a “scorched” version to match the signature scorch mark on the side of the Starliner capsule…
An educational model of the ULA Atlas V rocket with Boeing Starliner capsule on top in the launch configuration. Supports should not be needed. Scale up or down for your classroom need.
The Problem I am re-doing the airline setup for my aquarium. I needed some of the little airline hose inserts and didn't have any, so my wife said "Why don't you print some?". I looked to do this, but couldn't find any pre-made STLs, so I…
Update 2023/09/18 Version without a visible logo/name added About this project I designed this airbrush stand to fit into my workspace, following my design style and passion for hexagonal shapes. As I have a Harder & Steenbeck Evolution…
Aquarium airline restrictor to slow or cut off the flow of air from air pumps, useful for: Brine shrimp hatching Raising fish fry Drip acclimating Slowing sponge filter flow Etc. Prints without supports. Sized for 6mm O.D. airline tubing…
At 368 metres, the Berlin TV Tower is the tallest building in Germany and the fourth tallest TV tower in Europe. The TV Tower is located in the Park am Fernsehturm in Berlin's Mitte district. In 1969, the year it was completed, it was the…
Just print on the side with 100% infill. Best with PETG or PC blend. enjoy :)
A set of bookmarks featuring common airliner silhouettes.
Lion Head Arch-Element by Dom Beliner. Fixed / Re-meshed / Sculpted in blender and makeprintable for 3d printing. "Lion Ornament, Berliner Dom, DE" (https://skfb.ly/ox6SY) by Thomas Flynn is licensed under Creative Commons Attribution…
Small attachable tray for airline rails. Easy printable, without Support! Use 4 walls and tough infill. PLA is good enough but PETG is best for hot summerdays. Happy Printing😃 and don't forget to leave a like and post a make 🤩
Needed some lightweight rails for my camper to fix interior fittings.
An aquarium airline hose connector for 4mm/5.6mm silicone tubing is a specialized accessory used in aquarium setups. It allows users to connect airline tubing, typically made of silicone and measuring 4mm/5.6mm in diameter, to various…
This 144Wh 100w USB-PD power bank is the the little brother to my 288Wh version . My main motivation was to have a large power bank that I could travel on airlines with. The TSA regulation is 160Wh max . I ended up with this 144Wh power…
International Docking System Standard (IDSS) Interface Definition Document (IDD) Rev E establishes a standard docking interface to enable on-orbit crew rescue operations and joint collaborative endeavors utilizing different spacecraft.…
The Ferrari F355 Berlinetta is one of the most iconic sports cars of the 1990s , celebrated for its timeless design , thrilling performance , and refined Italian engineering . This model captures the car’s elegant proportions , smooth…
Accesorio para rail de anclaje con rosca métrica 6
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
A simple clamp to hold a standard airline / drip tube (~6.5mm OD). There are 5, 10, and 40 gallon versions included. 2018-04-20: Had some reports of the clamp breaking, so I reworked it on all sizes so it doesn't have to flex as much…
passt nur für: https://www.kurierbedarf.com/Airlineschiene-halbrund-slim-05-Meter-vorgebohrt https://www.kurierbedarf.com/Airlineschiene-Flachprofil-Light-2-Meter Print Settings Printer Brand: Prusa Printer: I3 MK3S Filament: Prusa PLA,…
I designed this to add a waterline mark on my ship models. It was printed in PLA with no supports and takes approximately 2.5 hours. The hole for the pencil is 7.54 mm (19/64") and is a press fit if an 6 sided pencil is used. A set screw…
The model can be printed in 4 parts and bolted together using the groves in the back of the parts. there are parts for doing so. The long rails have inserts for nuts. If you have larger printer, you can print it in two parts probably. the…
A fun rocket attachment for a 1/4" Pneumatic quick release fitting. Tested to 8 Bar/116PSI. Flies over 20m, have fun!
Turkish Airlines is one of the best airline company in the world. Many people proud of them. This is a desktop logo for their lovers.
JPG Design3D Endkappe für die beliebten Airlineschienen.
Remixed the mounting hardware from the Thrustmaster model and adapted it for the WinWing Ursa Minor Airliner stick Made a little shorter in the Y axis to fit on my 230x230 print bed. Filled the original holes that aligned for the…
Plug an aquarium airline hose in the marked holes. (inner: 4~5mm, outer: 6mm) Put a hose marked as 💧 in the tank, and blow a hose marked as ≈. (You might need to blow it really hard) Lower the siphon's drain hole from the tank's water…
You can label the tags by hand or use printed adhesive labels. If you are using a slicer that can generate text (e.g. Prusa slicer >= 2.6), you can generate the labelling quickly and easily during slicing. Printing conditions: PETG (PLA…
Airline rail end cap. Perfect for: https://ntg-online.de/shop/Airlineschiene-Zurrschiene-2-x-2-m-2-Meter-halbrund-m-Bohrungen-u-Fitting-Plastik Tight fit. Will not come off easily. Print with supports on build plate only. Deutsch:…
Created with photogrammetry (freeware: VisualSFM + Cloudcompare + Blender + Meshmixer) When you are interested in Lowest Budget 3D Scanning, you might also like: https://www.thingiverse.com/thing:2755968 Check out my other collections of…
Battery holder for R-line 550 2S batteries to fit in the Firefly 2S Internal measurements 18x14.5mm in case you have a different battery. Prints in TPU with no support
An end cap for a logistic (L) track aka air rail. Designed to wedge into the ends and seats flush and in place due to friction. A CAD model for this style of rail can be found on GRABCAD .
Fake Airline Rail (print and try before buy). Print on the long side w/o supports. For prototyping or as a toy. Disclaimer: This model is for testing purposes only and must not be subjected to static or mechanical stress!
I decided to make grilles for my 1984 Camaro restoration because reproductions were expensive and a guy on ebay selling 3D printed ones was more expensive than reproductions. To be frank, I did this out of spite lol. I spent a good bit of…
Printable airline rail fastening systems. Two versions available: Fully printable (M10 standard screw thread) With insertion of an M5 steel screw and 2 nuts no support needed
Over time I received some requests for providing a version of my well-received airbrush stand that supports some kind of clamping or mounting mechanism. With this remix, I am providing you with a solution that enables you to create…
The modular system consits of three parts. The airline_modular_mounting_device.stl which is placed in the airline rail. Depending on the application you can mount different mounting devices at it. In this case…
For airline rails with semi-circular profile - width: 48mm, height approx. 11mm. Print with the flat side facing down, support required.
Steckbare Endkappe für halbrunde Airlineschiene
I made this case to create something tidy for my wall mount of Tenda P200 powerline and glinet router to extend my wifi at home. Maybe useful also for you. My advice is to paste with vinyl glue the two pieces to avoid support on printing.…
škrtítko na vzduchovací hadičku do akvária ocení každý akvarista
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . Two different eras of American livery included Latest one, after major rebrand Classic one Base included so you can print others and…
Bracket for parkside spirit level with three holes for screws (4mm). I recommend printing from PETG. Fits in the car, workshop...
Silverline Hobby Knife Set in Gridfinity Remixed the paramatric gridfinity from pcnc to fit the Silverline Hobby Knife Set. Re-used the magnets and gleuded them in the new print.
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . Base included so you can print others and create your own desktop organizer of favorite airlines. A version with a hoop for keychains…
A display stand consisting of 3 parts for the AXM Starliner/Centaur papermodel.
Print face down. Add color changes at your preference. Avoid supports on the logo face if possible
Quick and Easy Centering Tool for Airline Cargo Rail for 5mm Drills.
Just remixed to allow the model to have 2 screws vertically in a wall stud instead of two screws spaced apart side by side.
layer: 0.2 material: PC Blend
This is a 3D printable tape measure case for a two 3m tape measures, an IKEA Trixig and Silverline Hiviz 3m. The tape locking mechanism works, see photos. YOU WILL NEED TO PURCHASE THE TAPE MEASURE AND USE THE TAPE AND LOCKING STRIP IN…
Description This is my first ever design. It is a 1:200 scale ULA Atlas V Model Rocket. It comes with a stand, nameplate, and obviously the parts for the rocket. You need white & orange filament to print it and it takes about 10 hours to…
The design credit should go to Elproducts. I just rounded the design with fillets and made it not so wide, to suit my printers build plate size (Printrbot play). It's 90mm wide and 80mm between the pegs. Print Settings Printer Brand:…
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . three different versions of Southwest's livery included. A base is also included so you can print others and create your own desktop…
I made this model from scratch, but it was inspired by the models in the links. I wanted it in two pieces with a dovetail joint, so i could store it in my travel bag. I like to use my phone in portrait mode, so I needed a longer shelf to…
I was watching this and saw the trouble a pair of scissors and tape can cause. My model will require some forethought, but it's an option for some. I can't say how long the cutter will work, but it should get you through a trip like this.…
cordino che si adatti a un foro da 5 mm
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . Three different eras of United livery included Latest one, after merging with Continental Nineties with bands of blue Eighties and…
This is a small hose clamp made to connect standard 1/8" ID aquarium airline vinyl hose to a 1/8" barb fitting. I make RC aircraft and do a lot of vacuum bagging. My normal pulls are in the range of about 22 to 24 inches of mercury and…
Siphon end for standard aquarium airline tubing (3/16" aka 5mm) in two diameters. Both options are 15 cm long and print without supports with 0.8mm walls, so they will print solid with 0.4mm nozzles regardless of infill settings. the 3cm…
Each plate is available as an plain OBJ file, which will require color painting in your slicer. Or use one of the 3MF files which are already colored …
Materiál PETG Výplň 40 - 60% Tisk bez podpěr - podpěry jsou součástí modelu. Stačí jednoduše vytisknou a vylomit 4x šroub M3 28mm se zapuštěnou hlavou (2 ks možno bez zapuštěné hlavy) 2x samořezný šroub 2mm se zapuštěnou hlavou pro…
Dies ist eine Kappe für den SILVERLINE Handentgrater. In der Werkzeugkiste könnte man sich ansonsten an der Klinge verletzen. An die Linkshänder (wie ich): Leider ist das entgraten nur schön, wenn man den Handentgrater auch in die rechte…
I needed to neaten up the airline in the tank, also the current aerator needs to be flat, and the airline was lifting it off the floor. This has a small shelf to put stones or sand on it in order to secure it. Excuse the photos, not that…
This is a flexible / articulated 3D model inspired by a modern Airbus A380–style passenger aircraft ✈ Designed as a print-in-place model , it prints in one piece with no supports, no glue, and no assembly required . Thanks to its…
These are homing switch mounts for the Sherline Milling Machine. I designed these several years ago and machined them out of Delrin on my mill, but they could more easily be 3D printed, although I haven't personally printed a set.…
Two parts so both can be printed easily without support and in the direction giving it most stability. Use PETG for better stability. Have fun and enjoy a nice drink! You will need a M4 nut and a M4x12 countersunk screw to assemble.
A simple flat cover for Silverline dial indicator. Replaces the black stock cover. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Notes: 3dJake ecoPLA 1.75mm transparent…
Perfect fit for tattu Rline 4s 550mah
I was having trouble with keeping some of my breeder boxes free of detritus settling on the bottom, so I made this little siphon end to siphon very small areas of the box. Just attach it to some airline tubing and start a siphon and…
This tool helps to find the center of cylindrical objects. Imagine you cut a broomstick and want to drill a hole lengthwise, in center. Place the tool on the end, so that the two sides touch the circumfere. The slide a pencil along the…
Each plate is available as an plain OBJ file, which will require color painting in your slicer. Or use one of the 3MF files which are already colored …
Airline rail end cap with M3x12mm screw to secure Print with supports on build plate only.
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . There is also a base so you can print other tails and create your own desktop organizer of favorite airlines. A version with a hoop for…
This is a model of the Tupolev Tu-154 (NATO reporting name: "Careless"). It is a three-engined, medium-range, narrow-body airliner designed in the mid-1960s and manufactured by Tupolev. A workhorse of Soviet and (subsequently) Russian…
Queste perle bloccano insieme i cordini della tua felpa con cappuccio o di qualsiasi altro cordino che si adatti a un foro da 5 mm 0,2 altezza strato con o senza supporto
A neat outdoor housing solution for a FritzBox FRITZ!Powerline 1260E WLAN Repeater to extend Wi-Fi to the Garden or Roof Terrace. Print each piece, and assemble as seen in the photos. The All-Weather box used was purchased on Amazon here:…
Turkish Airlines Logo Key Chain
I use this scribe to mark waterlines on the hull of a model ship or boat. Clearly, it can be used for other purposes where an adjustable-height scribe is needed. The arm has a hole/slot for a 5/64 (2mm) lead or blade; I found these among…
I reworked a model for openwire seperators, originally done in tinkercad, using Fusion 360. The seperators are intended for use with 14awg THHN wire. Wire snaps into the recesses using a set of slip lock pliers. I used a dab of waterproof…
This is just a simple airliner model, I would recommend using supports when printing unless your printer is magical and doesn't need them but enjoy.
Here you can find famous mascot of Berlin, the “ Berliner Bär” … This model has been specifically designed to accommodate two magnets with the following dimensions: Ø4 - 2mm. I have also added a non-magnet version in the profiles. you can…
Made to fit a Starline GPS 3x lap timer. May also fit other Starline models. The fit is quite tight so the two holes on the let you push it out of the holder with your thumbs. Basic dimensions are shown in picture 3.
I adjusted the backplane piece of @maxfagin_179712's model to better match the specifications on the backplate polygon markings and the 5 reflecting elements. You still need to go download the alignment-cross.3mf and connecting-rod.3mf on…
This model was designed for the LM Show Christmas Community Print Drive 2024. Add a color swap at 4.6mm height (layer 23 if printing at 0.20mm layer height). Notes: If you are using “Only one wall on top surfaces” setting, you may need to…
The Lockheed L-1649 Starliner was the final and most advanced version of the Constellation series built by the Lockheed Corporation. Introduced in 1957, it was designed for ultra-long-range flights and became one of the longest-range…
These are colored, by layer, Southwest Airlines logo ear savers. They are generated from artwork I found on the web, then converted to SVG (Vectric) and then STL files (TinkerCad). They are set up to use a common configuration using the…
A model of the powerline-like things found around everywhere in the videogame Tunic. Category: Models
3D Model of minimalistic Centerline Scalable object Dimensions: L- 100mm, W - 11,8mm, H - 55mm Support: Not required Download: includes STL files for 3D printing, 1 instructions PDF THE PALM TREE TOOL SHOP The world's digital tool depot…
Replacement covers for Motorline ECP TX3CH Ver 2.0 remote, designed in Fusion 360, I would recommend to print in ASA if you're leaving the remote inside the car or at least PETG. Easy print with no supports. If my model was usefull for…
This is a simple label made to fit on your tool storage drawer. If anyone has a different label they would like please comment and i will get right to making it for you.
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . There is also a base so you can print other tails and create your own desktop organizer of favorite airlines. A version with a hoop for…
Instead of paying close to $50 plush shipping to replace the belt cover, this re-design has the exact same functionality. It is not identical to the commercial product (so as not to violate intellectual property) , so it has to be used as…
This is an addition to the Gridfinity storage system designed by Zach Freedman of Voidstar Labs who “stole” it from Alexandre Chappel. I made this storage box for a set of Sherline Lathe Tailstock items. It uses a 2x2 area of the grid.…