Counting matching models…
I wanted to strech my knowledge of the 3D design software and I always like a nice fidget. Especially a fidget which suites 3D printing very well. These sphere can easily be printed without supports. After printing it needs a bit of…
John Stewarts Ring from the up coming Green Lanterns HBO series. Not 100% accurate as only based on one shot from the teaser trailer.
Info: remixed Robin_Pe rude finger cap found out, that his version printed at 97% with 0.4mm nozzle works great for me (Prusa MK3S+) Not for presta valve ! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already…
A small nut driver with which you can also screw in hard-to-reach places. This nut driver also has a through-hole so that the protruding part of the screw does not interfere but simply passes through the nut driver. Width across flats for…
Christmas and Holiday themed tealight lantern lithophane ball. Lantern fits LED tea candle IKEA GODAFTON 4 versions: simple image with NO TEXT: "svicka_panorama.stl" simple image WITH PF2022 TEXT: "svicka_panorama_PF_opr.stl" detailed…
Info: remixed my previous horns cap print - now with open thumb horns Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already scaled original to best fit, so just print this at 100% scale or…
This is a slight modification (added text, print settings, etc) and print preparation for printing your own 3D Printing Settings sample box featuring various Infill types, Finish types, and Surface pattern types. The following Patterns…
Dies ist ein Remix von LorenzS' Fernsprechbude. Die Bude wurde verkleinert und das “F”-Zeichen hinzugefügt. Außerdem wurde die Bude auf den Rücken gelegt, damit man das F-Zeichen mehrfarbig drucken kann.
Print with supports but only on the tip of the horn (if you don't block the supports around the hole for the screw, it won't be easy to remove) PLA is fine 15% infill 100% size 0.2mm use M3 screws (max 20mm long) with assorted bolts If…
This one was tricky! I wanted to combine the upcoming holiday with the vase competition and add my twist! This spiral vase includes an integrated handle that can be easily detached to make the vase into something more. Pop the handle into…
Info: glasses with customizable texts & customizable see-through lens patterns lenses are: interchangable you can print your own pattern using different infill pattern and percentage (see 3mf samples) customizable texts: i prepared 3mf…
SEE IT IN ACTION! FEATURES This washi tape tool features a straight edge, zig zag edge, and arrows/chevrons to tear your washi tape into nice shapes! See the photo for examples of combinations you can mix and match to create fun washi…
Low Poly Horns for Caps, Hats and Helmets Give your headwear a bold and unique appearance with these Low Poly Horns . Featuring a modern geometric design with sharp polygonal surfaces, they are perfect for cosplay, festivals, Halloween,…
Vytvořil jsem distanční kroužek na svíčku z našeho papírnictví. vnější průměr 42 mm / vnitřní průměr 37,5 mm I created a candle spacer ring from our stationery store. outer diameter 42 mm / inner diameter 37.5 mm
Nummernschildhalter für den Metz Moover E-Scooter, da braucht man das Kennzeichen nicht mehr auf den Kotflügel kleben. Gedruckt ohne Stützen in Prusament PETG
you might need to scale the model differently according to your head size, be sure to measure first before printing just the horn part is also included if you want to glue it directly to a hairband (might fit better) print with low infill…
Hello, Today I have a Fitness gym Satan with horns for you. Suitable for a diorama. Or for coloring. He is really muscular :-D Happy printing! I used PLA/PETG as the material. You need to use supports!!! If you are interested in my work,…
I made a version of this using the orignal mounting plate and sheet metal years ago. I've since converted the Burns to electric and after seeing the 3s battery holder I made, someone was interested in the servo mount, so here it is!…
This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…
Skull with curly horns. You'll need supports!
Šablony lze použít k dekoraci různých obrazů, diplomů, plakátů, …
Tastergehäuse mit Farbwechsel 4x M3 Messing Gewindeeinsätze benötigt !!!!! 19mm Taster Amazon Dünne Wände erkennen im Slicer aktivieren !!!!
Needed a solution to hang various paper lanterns that hang from their cables - these support the cable by friction fit and allow the lantern to be hung from a thin wire or a screw mount. (NB: screw mount is untested) Obviously - these are…
Ms Burns is a 3d name 271 mm long x 50 mm high x 20 mm deep. It is made with the Arial Black font with a custom scad file. I am making names for my grandchildrens' teachers as Christmas gifts. The 'Ms' is 1 mm deeper than the other…
These are 3D-printable horns , designed specifically to fit Bunchems (the small spiky balls that stick together). The horns feature a simple snap-fit design that presses gently into Bunchems without glue , making them reusable and easy to…
Krpan Fernsteuerung Halterung für Montage in Fahrerkabine
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Hey makers. Today i bring you this model that i intend to use as a lamp, it's Hollow and you put a 5v LED lamp (or whatever you might have laying around) inside it. The original model had a lot of polygons and i simplified it a bit but it…
These Mini Bag Lanterns were inspired by paper bag lanterns or luminaries. They print flat and then are folded into shape. I designed them to be used with standard size tea lights:) These could also be used as little gift bags filled with…
🔥 Cover up that boring lighter! Always have a flame on hand with three different styles to match your vibe or your mood! TIL: The name Kanik comes from Greenlandic origin, and it means Blood. I used fuzzy skin on these models, and they…
Here are Maleficent's horns! Modeled by Garrett and Chelsey of Chaos CoreTech and featured on 3D Printing Nerd! Print instructions Scale to what is appropriate for your head, or whomever's head this will be on, then, slice, print, enjoy!
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. Supports…
Japanese pattern bookmark (5 patterns + STARWARS pattern) Recommended settings are : X:30mm Y:60mm Z:1mm ＜In order from the top left＞ ・Asanoha Pattern ( Nezuko Pattern from Demon slayer ) → It contains the wish for the healthy growth of…
A Krampus Horn. Print One. Mirror the Second. Added Solid Krampus Horn. 12/8/2022 + it is higher poly. (Hornsolid_stl)
Jack-o'-lantern bobblehead for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/5cWb99a7tlI https://youtu.be/y7rcWTLWsCM https://youtu.be/3HwXJQMGgsQ Printing Pumpkin heads may require supports (around the exterior…
A parametric car/motorcycle license plate key chain designed to be printed on single filament printers with color change. Add a filament change in your slicer and swap the filament mid print in order to achieve a two color print. Features…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. The model…
These digital 3D printable models of Clay Wheels are meant to be used to create textures in clay and polymer clay, pottery clay, cake dough, fondant, fabric, and other materials. The download contains 18 OBJ files (reversed patterns…
This print consists of three main components: White base plate, blue insert and black frame. While using Prusa Slicer 2.6.1 or later this leads you to the PS feature: "Add part → text". For German license plates (Kennzeichen,…
Improved V2 - better hairband connector see: https://www.printables.com/model/1446163-horns-on-hairband-v2 The horns have a tight fit on the hairband so that you can adjust the position as you like, no glue needed. Horns printed in PLA…
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The spikes can be added during tying, or ahead of time so the positioning is somewhat random. They can also be used in limb joints or…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
UPDATE : A NEW MODEL HAS BEEN RELEASED, WITH SCREWS https://www.printables.com/fr/model/772056-devil-horns-for-your-hat-now-with-screws I love to add little custom stuff to my caps, so : why not horns? Use the holes on the cap to fix the…
Smooth Devil Horns Hey maker! 👋 Small devil horns with a smooth surface, perfect for costumes, cosplay, or decorations. Features: Scale the horns to your desired size. Smooth design for a clean finish. Small and lightweight – easy to…
Elegant 3D printable Clay Wheels ✨They're perfect for adding beautiful Aztec-inspired textures to all kinds of materials like clay, polymer clay, pottery, cake dough, fondant, fabric, and more! 3 patterns in STL print-in-place handle Size…
My wife love book series Court of Thorns And Roses and when i can't find any nice bookmark so i created one. i create 2 versions v18 - velaris in circle and bottom of bookmark with text “to the stars who listen. And dreams that are…
Use supports and glue the horns onto the headband. 50% infill.
Update: HeadphoneDevilHorn_V2 can now be printed without support! HeadphoneDevilHorn_V2 is slightly bigger than V1, please see the photos for the size differences
Anpassbares deutsches Nummernschild, die Buchstaben und Nummern sind zum aufkleben oder im Slicer hinzuzufügen.
This is not my model but a repost off of the amazing creator from Makerworld. BRIM IS RECOMMENDED Also subscribe to this makers channel 3DP-RNS If you guys have any suggestions for accessories, please comment or message me!
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
I made this needle really big(10 cm) so it's good for crocheted big toys. I use it a lot to sew parts of plush toys.
Remixed this from some old bjd files I had laying around. It just fits over the original head for lucky13.
Magnet of the University of Texas Longhorns Logo. It is designed to fit 6mm x 3mm magnets. Base layer should be white. G-CODE has two layer pauses: 3.8mm: add magnets 4.4mm: color change to orange
why my dancing skeleton has been deleted
I love the box by MrElektro @MrElektro_32607 . I wanted to create different size boxes and also wanted a stackable version. I've not had much luck editing and scaling .step files . I'm also concerned that things like wall thickness won't…
I printed it with 4 walls/ceilings/floor, 15% infill, tree supports, no raft, no brim.
The horns have a tight fit on the hairband so that you can adjust the position as you like, no glue needed. Horns printed in PLA (matt PLA was used for the pictures) both 0.1 or 0.2 mm layer height should work. 15% infill is sufficient…
Print with supports but only on the tip of the horn (if you don't block the supports around the hole for the screw, it won't be easy to remove) PLA is fine 15% infill 100% size 0.2mm use M3 screws (max 20mm long) with assorted bolts If…
Basic Horns for All Helmets, Use Hot Glue to Mount
My 3rd design, spooky black cat(Gigi) with some jack o lantern friends(Clementine and Mandarin)! Please let me know if there is anything I can improve on and any designs you would like in the future!
Only one model. Mirror the model to get both sides.
Detachable devil horns for motorcycle helmets. Can be detached from a base on the helmet. Mounted using a twist lock / screw mechanism. I recommend printing it in PETG and printing screw_in_mount and screw_insert slower for better print…
In the heart of a lush garden, where the symphony of nature played its endless melody, there bloomed a solitary rose. Its petals, a crimson as deep as the blush of first love, held the morning dew like precious jewels. But beneath the…
Hi Todd, I have created these to suit an adult size head and flattened the bottom for ease to 3D print. You will need to file/ round them off on the bottom to fit snugly to your scalp. Really pleased I think they came out well and should…
Let's rock it !!! 🤘. Enjoy it as much as I do. Thanks to soozafone for their original design Lucky 13 Printable Jointed Figure
Fashion Illustration Ruler for garment pattern design, for designing various styles of suits, coats, trousers, dresses, and work clothes.
Update 4: Grouped parts per request, arranged by color, Base and Stand remain single. New articulated figure, this time its Ornstein from Dark Souls! This figure uses the actual game model, downloaded from The Models Resources, most of…
A set of two patterns used to cut nice end for belts and other leather pieces. The base width of the models is 20mm but it can be adjusted in any way you want in the slicer. A small organizer is also provided to keep them together. A 3mf…
Print-in-place, collapsible horns for cosplay. Collapsed, these are about 80mm tall with a base of around 90mm in diameter for easy transportation. Each segment can be oriented independently to give a variety of different looks. There are…
From the bottom, it is better to stick the light with adhesive tape to the pumpkin Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color: Orange Filament material:PLA Notes: 0,24 mm layer 0.4mm…
Three different styles of R/C control horns for your homebrew foamy R/C planes. Designed for printing in PETG or ABS at 100% infill for optimal strength. Flat horns are designed to be pushed through a slot cut in foam. Big horns need…
print in petg or pla - of course consider petg or asa in case of outdoor usage
First impressions is everything! Show the world that you're not afraid to show your inner demon with this quick print for that board meeting, job interview, first meeting with girlfriend/boyfriends parents or even as everyday casual wear…
Because this cosplay requires a wig in my case, I added hoops to sew the horns onto the wig and that way, I didn't have to deal with a headband or clips or anything unsightly. The print is super straightforward. No supports needed, just…
devil type of horns for cosplay/costume/halloween inspired by base tiefling horns from baldurs gate 3
2 stamp wheels from the Egyptian Collection (31-32) These digital 3D printable models are meant to create textures in clay and polymer clay, EVA foam, dough, cake fondants, and other materials. These wheels work best for pottery and other…
At 368 metres, the Berlin TV Tower is the tallest building in Germany and the fourth tallest TV tower in Europe. The TV Tower is located in the Park am Fernsehturm in Berlin's Mitte district. In 1969, the year it was completed, it was the…
Thorns overlay tile replacement for Gloomhaven board game. This printed better than I thought it would but beware of stringing. Print instructions Supports: No Resolution: High
3 different horns that could be attached to a head band or used as a fantasy prosthetic! Print Settings Printer: Jazla J1 Rafts: Yes Supports: Yes Resolution: .2 Infill: 20% Filament: Gizmodorks PLA Green Category: Accessories
Textured Krampus Horns. Added a rough surface texture with surface modifiers in blender. Many krampus horns seems to be a bit grittier than my original model.
These horns are made to be sewn onto a wig, there are five hoops at the base in order to do that. The model is pretty big to make the proportions of the character work. I personally printed it with the front laying down on a bed of…
WORK IN PROGRESS & UPDATES BASE UPDATE - added a base with a small cutout to make sure the candle stays in place (10/12/23) “How to assemble guide” - ETA 12/12/2023 UPDATE 13/12 MERRY XMAS / HAPPY NEW YEAR 📖 READ ALL OF THE DESCRIPTION…
This model is compatible with the lego system.
These Japanese styled lanterns were designed as centerpieces & table numbers for a friend’s wedding. Battery powered fairy lights were placed in each lantern to illuminate them for the event. 16 centerpieces consisting of 96 individual…
These are the SVGs I used to make the pretty patterns featured in my video here:
A simple Plant pot inspired by the looks and feel of rose thorns! It is quite sharp! Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the…
Summary Designed these myself after not really seeing any designs I liked and that were inexpensive/free. Taken inspiration from u/CryptographerOk5058 's Stealth hoods: https://www.thingiverse.com/thing:6537694 . As well as taking heavy…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Someone asked me to design this hand, so here it is. You will need a small support below the middle finger/ring…
The two files provided are for the printed case and a laser cut screen protector. The norns Shield is secured in place using 4 M2.5 * 5mm screws, no standoffs are required, only the Shield PCB is screwed in, the Raspberry Pi sits on the…
Can hold up to seven pairs of hands.
Clip-on ears for headphones! If your headphones have a different-shaped band you may want to adapt the clip design They print in three layers and are held together by the clips - I had to do a little filing to make the clip fit snugly…
Horn for cosplay. Mirror for the opposite side. No supports required and can be scaled to fit your costume and head. I printed at 0% infill to save weight.
I have improved some of the popular Stealthburner Patterns with the following attributes: transferred them to the release version of the Stealthburner Main Body made the color patterns 1mm thick, so that also weaker colors can shine and…
Nathan K3LA and K5LA Air Horns for all your 1:29 "G" scale diesel locomotives.
![Filament Sample Box w/ Infill, Fill Patterns, and Finish Types [REMIX]](https://media.printables.com/media/prints/549902/images/4418204_cc329943-2227-45f1-807c-9f0d489720d7/pxl_20230810_151038751mp.jpg)
