4,110 models
This is a percussion frog or a guiro I designed. I based the design off of a wooden one my grandpa has. The only part of the model that needs support is the mouth, the rest of it including the roof of the inside can support itself. Since…
Print approx. €8.59–€10.50 excl. taxPreliminary estimate for one variant
Remix of Val's Grogu from Mandolorian Original model https://www.thingiverse.com/thing:4038181
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €13.07–€15.98 excl. taxPreliminary estimate for one variant
This Model was 3Dscanned from a traditionally made wooden percussion frog. The higher the infill density the better the Sound! You can separate the Frog and Drum in PrusaSlicer if you'd like the Frog only :)
Print approx. €5.54–€6.78 excl. taxPreliminary estimate for one variant
EDIT 8/23/2022: added “Hinge Rod looser” for easier assembly. If you need any adjusted parts just let me know. EDIT 7/21/2022: added the tongue file I made the frog from Minecraft! It's technically not getting released till next year but…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for PETGSource material: PET
Printing parameters: Material: PETG Resolution: 0.2 mm Perimeters: part 1/2 and cutter: 4 part 3/4: 10 part 5/6: 15 Supports: only part 5/6 overhang Assembly: Fix hinge parts with superglue (e.g. Cyanoacrylate) First add parts 5 and 6 to…
Print approx. €4.71–€5.75 excl. taxPreliminary estimate for PETGSource material: PET
Remix of https://www.thingiverse.com/thing:4887165 by TheBrotherBean and https://www.thingiverse.com/thing:410699 by EdisonM. Inspired by https://www.prusaprinters.org/prints/100362-fred-the-frog-but-hes-also-a-cowboy by AdamTKWallace.
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
Prevent your Asus ROG Ally from getting stick drift while in transit with this 20-minute 10 cent print! These stick locks prevent your joysticks from moving and getting crushed while in a bag in transit. This helps prevent stick drift…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Is it a frog? Is it a dragon? Well, it's quite complicated but for sure he is chonky and adorable. New improved file has been added, scaled up with flat bottom.
Print approx. €6.46–€7.89 excl. taxPreliminary estimate for one variant
What colors will you choose? Ever since I designed the dual color cow I really wanted to make a poison dart / tree frog version, but none of the available 3D models were suited for this operation. In the end I decided to try and model my…
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for one variant
Sample models for the Prusa CORE One+ INDX 4T/8T. Both models can be printed at 0.2mm layer height without supports. Poison Dart Frog (4 colors) Our model was printed with the following Prusament PLA filament colors (the order of…
Print approx. €3.73–€4.56 excl. taxPreliminary estimate for one variant
Stroke its back with the stick to hear it croak. Mine sounded like baby frog. Croak depends on size and infill. I recommend 80%. Stick is optional. Its sounds great with other objects too such as chopsticks, pencil, even ur own nails. I…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
This TreeFrog Whistle works very well. It sounds great. I made it from wonderful and popular https://www.printables.com/model/3116-treefrog and https://www.printables.com/model/495173-flat-pocket-whistle and then merged them into one…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
200x80x1mm - 2 colors - start to print with light color , than change filament to some dark color
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Simple model of a microgreens planter with various extension like a stackable holder, lid, and sprouting tray. Everything was thoroughly print-optimized. The lid can optionally be separated in slicer and has a hole - for example, use the…
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant
I was not satisfied with other seed pod designs for Aerogarden, so I designed my own. The spiral structure is designed to be sturdy for printing without any supports - very low risk of spaghetti as it prints. It fits these seed starter…
Print approx. €1.07–€1.30 excl. taxPreliminary estimate for one variant
Simple cover to close the empty holes in my AeroGarden Harvest aeroponics system. This stops light from ruining the roots (use opaque filament) and reduces algae growth. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
Add a touch of Star Wars charm to your bathroom with our adorable Grogu toothpaste squeezer! This cute and functional accessory is shaped like everyone's favorite little green Jedi, making your daily dental routine a delightful…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
* Disclaimer : my full spectrum grow led strips is still in transit. I used a regular led strip for the demo, but it is not recommended * Details This microgreens farm is compatible with 5"x5" grow pads or Agar Agar gel. The seeds tray…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
Percussion Frog 90% infill, WITH SUPPORT, only in the mouth In Prusa Slicer, you can now easily add support manually with the brush. But it's still not that easy. So here are my .3mf-files (for the MK4). Two versions: Original size and…
Print approx. €5.50–€6.72 excl. taxPreliminary estimate for one variant
The frog itself doesn't need supports, but the hook does.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Kermit the Frog dressed as a knight playing banjo while sitting on a log.
Print approx. €19.59–€23.94 excl. taxPreliminary estimate for one variant
I Remixed The Model for faster print less trash and user without MMU or any other Multicolor Setup
Print approx. €7.39–€9.04 excl. taxPreliminary estimate for one variant
Parts: Water reservoir Sprouting tray Weighing plate Lid Divider I'd recommend to use PETG for at least the reservoir to make it watertight. For slicing the sprouting tray you have to use PrusaSlicer, because the grid at the bottom is…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for PETGSource material: PET
Frodo The Frog, (Kinda like Lord Of The Rings) :)
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
Print approx. €1.93–€2.35 excl. taxPreliminary estimate for one variant
Filament : Prusa Beig. PLA : 0.20mm. 15% Infill : Gyroid. Nozzle : 215c. Bed : 60c. Support : Organic Soruppt.
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for one variant
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €3.08–€3.77 excl. taxPreliminary estimate for one variant
I built this model so that it requires no supports, and can be easily printed without any supervision. Just print the two halves (they're symmetrical so doesn't matter if you print one or both at the same time), drop them into the…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
This is the MiSTer Multisystem2 Analogue enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support. Please read the…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
Oh f***, that’s Rogue — hey, don’t stare. You seen the huscle standin’ next to her? Yeah? Well, she could kick their asses. S***, choom, Rogue’s a living legend. Queen of the Afterlife, they call her. Used to be a Solo before upgradin’ to…
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant
Chubby frog remix to enable to be hung / used as a keyring
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
Circular pasta and pierogi cutter 10 cm / 4 inch
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
kermit the frog keychain. he is 5mm high the eyes, mouth and collar are 4mm high. I recommend printing it at 215 degrees Celsius if you print with PLA. If you like him I would appreciate if you give him a like. if you printed it out make…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
grogu coaster
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
Water spouting frog : https://drive.google.com/file/d/1EwWdHxvZjmnDGIcFG_wjHauetFlx5DhG/view?usp=sharing powered by a solar pump. (only at full sunlight) The frog is attached to the swimmingplatform at the edge of the pool. Print…
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant
Microgreens are fun and easy to grow and add a nice touch as a garnish to all kinds of dishes. This three-piece kit includes a reservoir tray that holds water, a growing tray with holes for drainage, and a germination lid to help seeds…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET
Stylus holder for the Asus ROG Flow X13 with original stylus (Ø 9.5mm) It clamps down on the edge of the screen and grips on to the lines on the back of the screen. All ports, vents and power button stay accessible (depending on…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Painted Face of Pepe the Thinking Frog
Print approx. €8.77–€10.72 excl. taxPreliminary estimate for one variant
I've re-created a ZoomGear for the Sea Frogs Sony housing (https://seafrogs.com.hk/) Lens Support: Sony FE 16-35mm re-used the gear part from https://www.thingiverse.com/thing:5850202 and added a cylinder to match the lens diameter Add a…
Print approx. €2.73–€3.33 excl. taxPreliminary estimate for PETGSource material: PET
From the mind behind a myriad of projects he never got around to finishing comes… FroGolF! A tabletop game for 1 to Infinity-1 players ages 6 to 98½! Do you have a 3D printer, some empty table space, a roll of packing tape and at least…
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
I wanted to have a way of quickly seeing the progress of my current print, without visiting my printer, an app or the webpage of octoprint. Also I needed a use for the LED-Ring I bought a few months ago. What you will need: NeoPixel…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
FR: Juste une petite palette avec différents angles pour masquer certaines zones lors de vos peintures avec aérographes (ou pinceaux) EN: Just a small palette with different angles to mask certain areas when painting with airbrushes (or…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
This is a car badge inspired by the Expanse ship Razorback, with the outline of a 2019 Mercedes GLC added. I will add any other custom car outlines in place of the GLC300 that you like: if you agree to post a make, or make a donation to…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
Couldn't find one which fit the 240EB so here's a quick and dirty one. Friction fits close enough to stay in place and only contacts the printed part in small areas too keep cooling from being impaired. Use something other than PLA since…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
Assassin's Assassin's Creed Rogue logo model for decorating a wall or furniture. 130 mm x 150 mm. From the game series by Ubisoft. I printed the model in the photo with PLA. The logo must be printed in 2 parts. Base plate with Assassin's…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
My son has a Huawei P-Smart 2019 phone and I wanted to make him a phone case for it. We are all big fans of The Mandalorian so the choice was made on Grogu. https://www.thingiverse.com/thing:4074227 supplied the base case for the phone.…
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
See also the new version with air vents . As I didn't really liked the original housing of the CV-Programmer by mXion, I just created an alternative. To prevent the electronic board from moving inside, I suggest to add a small…
Print approx. €1.68–€2.06 excl. taxPreliminary estimate for one variant
This keyring is themed on the 1987 move “The Lost Boys”. Edgar and Alan Frog definitely deserve their own merchandise, so I designed this keyring for their vampire hunting business. It has a wooden stake going through the heart of the…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Bring a little sweetness to your everyday life with this adorable keyring inspired by Haribo’s frog! This design was created by 3D scanning a real Frog candy (my absolute favorite sweet!) and refining the details in Blender to give it a…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
arquivo pronto e já fatiado do imprimir Gcod
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
a cute Zen frog for the garden or as a home ornament
Print approx. €3.21–€3.93 excl. taxPreliminary estimate for one variant
This is a clip-on hook for the IKEA BROGRUND corner shelf , specifically meant for a IKEA LILLNAGGEN squeegee but obviously for other hookable stuff too. The hook diameter and clip width is 8mm , dimensions: PRINT INSTRUCTIONS No support,…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Amazon product ID was B08F9X1Q4J with the godawful title of “Delippo 240W 20V 12A Laptop Ac Adapter for ASUS ADP-240EB B Rog Zephyrus Duo 15 GX550LXS RTX2080 rog GX550LWS-HC099T i7-10875H rtx2070” It's almost certainly a re-badge of…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for PETGSource material: PET
Vyučující si prostřednictvím Scratch stavebnice připraví prostředí pro procvičování programování ve Scratch bez použití počítače.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Studenti si navrhnou a vytisknou vlastní spirograf, kterým si mohou nakreslit opakující se obrazce.
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Replacement plastic part from Rog Strix Fusion 300 headset Print with supports, 100% infill, brim 6mm, 4 perimeters.
Print approx. €1.22–€1.50 excl. taxPreliminary estimate for PETGSource material: PET
This design is specific to the Google Pixel 6a when inside a specific phone case: 𝟮𝟬𝟮𝟮 𝙉𝙀𝙒 UniqueMe [3 in 1] Design for Google Pixel 6a Case, 2 Pack Camera Lens Protector,[Non-Yellowing] Matte Hard Back Shockproof Protective- Black This…
Print approx. €6.86–€8.38 excl. taxPreliminary estimate for PETGSource material: PET
Corner pieces to lift the back of an asus rog strix laptop. Mirror stl for left corner.
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for PETGSource material: PET
Some jolly rogers from the one piece show
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €2.59–€3.16 excl. taxPreliminary estimate for one variant
Clips onto the lip of a trough to hold a phone or other small items during an ice bath.
Print approx. €2.72–€3.32 excl. taxPreliminary estimate for PETGSource material: PET
Žáci vytvoří vlastní deskovou hru, kterou pak budou moci využívat při svém kroužku deskových her. Do této hry budou potřebovat figurky, které si vytisknou na 3D tiskárně.
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Great showpiece or gift for your friends. Treefrog is commonly used as a 3D printing benchmark. We prepared the file at variable layer height 50 - 120 microns layer height to show you what your printer is capable of 🙂🙂 Author: Morena…
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
Hello Printing fellows!! I present you jumping frog! Addictive toy ! FOR EXTRA JUMP USE PTGE!!! Assembling is very easy! If the joint is to loose i recommend to use glue for extra! The joints are your choice iff you need them if no you…
Feel free to share if you make! If you want to print very large check out this remix with a more "HD" Model https://www.thingiverse.com/thing:4908325 Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 not my model, made by “…
ℹ Tips for printing: Filament: PLA Supports: No! Layer height: 0.16(0.15)mm or 0.2mm Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured Build Plates not…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Original link by KerberosFl : https://www.thingiverse.com/thing:3100640/files
UPDATE : New version available https://www.printables.com/model/390212-coaster-printing-in-progress-spiral-edition ---- This is a coaster representing a nozzle extruding filament, it will prevent any spilling on your furniture. The…
Chonky Zen Frog – Enlightenment Has Never Been This Chunky 🧘🐸 Take a deep breath… and let the serenity of this plump, peaceful frog wash over your print bed. Meet the Chonky Zen Frog , a delightfully rotund amphibian who has mastered the…
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
Originally taken form a woodwork blueprint and adapted for 3D printing. Shape is rounded and the gears are bigger to adapt for children's use and fun. 23 Sept. : A higher frame has been designed around the gears, and a new file with this…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Disclaimer: This design is inspired by the Spirograph drawing toy. 'Spirograph' is a trademark of Hasbro, Inc. This product is not affiliated with or endorsed by Hasbro, Inc. A simple Spirograph drawing template gear kit that leads to…
I've been doing a little research on this helmet and have put together my own rendition of this helmet based on the White Amour pictures I've listed here. I recenly made Geoffro's Mk2 helmet from his patreon web site. I'm still very new…
Frog with a Crown Decor Figurine Watch out for the crown when removing supports. Feel free to scale it as desired. Printed with Fuzzy Skin effect. Fuzzy Skin: All walls Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 Happy…
I've made a MMU / Multicolor remix of a cute little frog I've found on Thingiverse . It's just a single STL file with some modifiers for the different colours. I used PLA from dasfilament in “Grüngold”, “Reinorange”, “dasfilament Grün”…
Spirograph Have fun by drawing with this Spirograph and the various gears! --- The round gear guide has 84 teeth on the inside and 108 teeth on the outside. The linear gear guide has a width of a 24 teeth gear and a total of 54 teeth.…
The "Fred the Frog" keycap is a fun and quirky addition to your keyboard. This keycap is sure to bring a smile to anyone's face. To achieve the best results with your print, it is recommended to use a nozzle size of 0.4mm or smaller and…
ZeroG Astronaut, printed for fun or serial videos for the Mercury One! Recommended settings: 10% infill 4 Perimeters 4 top/bottom layers
Baby Grogu Using the Force. Design by https://skfb.ly/onVoy. Fixed for 3d printing.
This will hopefully, one day be a complete model of the Creality Ender 3 S1 printer. It is currently still a work in progress. I modeled everything off of my own Ender 3 S1, so I cannot guarantee that yours will be identical. Please note…
Some info about the whole build. In the diorama folder i give the base and the bridge part, and also Balrog and Gandalf scaled to fit on the bridge. That means that Gandalf needs to be printed small for this diorama to work and best way…
Easy removal of supports, pay attention to the foot area. Frog samurai miniature with high details
**I did not make this model, TheBrotherBean made this on Thingiverse.com
Meshed together two models to make this, bc why not.
A funny and surreal 3D model featuring a thoughtful frog sitting on a toilet like a tiny philosopher on his throne. Perfect as a desk ornament, gift, meme print, bathroom decoration, or conversation starter. The model has a compact…
Say hello to Mochi , the cutest little frog you didn’t know you needed! With its smooth, rounded design and adorable expression, this 3D-printed frog is perfect as a desk companion, or a tiny collectible. It prints in under 30 minutes,…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
My takes on the various races and player character options of D&D are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…
Update : In V3 is the complete disassembled backcover of the Ally. Use standard if your PC has problems with the higher detail file ________________________________________________________________ Use V2 - Asus ROG Ally body with more…
Introducing the Jumping Frog, a hilarious toy that guarantees endless fun! Watch as the Jumping Frog leaps and bounces around, bringing laughter and excitement to your playtime. Get ready for some unforgettable moments with this…
We've created a test print to calibrate your settings printing in ABS/ASA . The test print contains 5mm Dowel pin hole top to bottom This is a 5.3mm hole to compensate for shrinkage 5mm Dowel pin hole side to side This is a 5.3mm hole to…
