Search results: rub

Sort order

4,094 models

P
PrintablesSalaman

Rubber band plane Vol.2

The Rubber Band Plane Vol.2 is an excellent and fun project for all ages. With its simple design and impressive flight performance, this plane offers both entertainment and a hands-on learning experience. Perfect for outdoor play, it…

Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant

Downloads
3,156
Likes
666
Rating
4.59
P
PrintablesLanzDesign

VasePlane V2 - Vase Mode Glider with Rubber Band Launch System

This model is the V2 version of the original VasePlane which can be found here . This glider is inspired by the stereotypical single seat fighter jet appearance and has a hook just under the nose so that a rubber band can be used to…

Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant

Downloads
2,416
Likes
336
Rating
4.86
P
PrintablesSTEMFIE

STEMFIE rubber-band-driven car

A rubber band-driven toy car made of parts of the new 3D-printable Stemfie3D construction set. Print instructions This toy car is easy to 3D-print and quick to build. It is the first project demonstrating the new and fully 3D-printable…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant

Downloads
946
Likes
160
Rating
4.67
P
PrintablesBubutech

PAW PATROL RUBBLE Bulldozer

tlač 1:1 pre male postavičky tlať 1:1,2 pre vačšie postavicky. vznikne vnutorný priestor 4,5cm dlhy vid fotka šroby: 3x10 4ks 3x25 1ks infil 20 perimeter 2

Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
873
Likes
157
Rating
5
P
PrintablesOWL ART

Rubber Band Glider Launcher

Rubber band powered gun for launching a glider. Minimalistic model for a small consumption of material. Easy to print and assembly. I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Body, Cover and Trigger need to be printed…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
863
Likes
211
Rating
5
P
PrintablesPrintineer

Integrated Support - The World's First Working Print in Place Rubik's Cube

Update It Works really well! I printed a working one on a Prusa Mk3S+ and other printers are already printing too! Enjoy printing your own! Please assure yourself that you're using 0.1 mm layer height and printing outer perimeter first. I…

Print approx. €20.21–€24.71 excl. taxPreliminary estimate for one variant

Downloads
847
Likes
116
Rating
4.67
P
PrintablesMordiev

Spool Skate for Rubbermaid 21 Cup Drybox

The 21 Cup Rubbermaid containers are getting harder to find and usually more expensive. Here is another great option from the community. https://www.printables.com/model/952313-filament-dry-box-with-rollers This is a spool skate that fits…

Print approx. €3.70–€4.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
723
Likes
135
Rating
4.78
P

Prusa XL Nozzle Scrubber / Brush

Here's my design of a Prusa XL Nozzle Scrubber / Brush. There are tools for correct assembly, brush holder and filament collector. Drawn in Fusion 360 Print instructions ¤ Remenber to use tree support on Brush holder ¤ Use .3mf or .gcode…

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
394
Likes
59
Rating
4.85
P
PrintablesMordiev

Hanging Mount for Rubbermaid 21 cup Drybox

This simple mount allows you to hang your drybox from the underside of a shelf or enclosure. Print instructions .2 mm layer height 3 or more perimeter walls This is a remix of this thing on Thingiverse by customyota . Mine has a tighter…

Print approx. €2.23–€2.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
309
Likes
65
Rating
4.8
P
Printablesvolly

Rubber Band Filament Cutter 45°

I love the Filament Cutter 45 from Pomi, but as i try to print it, i found that the needed materials are not as common available as i thought. So i decided to give it a “facelift” with a even easier accessible material: rubber band. Print…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
278
Likes
63
Rating
5
P
PrintablesHoracio

Rubber band loaded Business Card Holder / Dispenser

Description Rubber band loaded Business Card DISPENSER This is a dispenser of Business Cards which used rubber bands for a “spring-loaded” mechanism. The main idea got from Honza, so go visit his profile to see his other designs. Honza |…

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
265
Likes
57
Rating
4
P
PrintablesZach

Pegboard - Rubber Mallet Peg

A simple pegboard mount for a 16oz Rubber Mallet - or any other thick-headed tool with a < 1" shaft and symmetric geometry. I want to keep my pegs fairly lightweight, but at the same time I want to make sure that heavier or more dangerous…

Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant

Downloads
181
Likes
30
Rating
4.33
P
PrintablesXorsinhoX

Kuchyňská stěrka - "rubber" kitchen spatula

My first print two commponets Model 1.Flex yellow SUUNLU -SPATULA 2.PETG orange PRUSAMENT -GRIP please share with me your creations and result!!! Thanks

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
177
Likes
24
Rating
5
P
PrintablestheHeig

Sprinkler Head Shrub Adapter

This ½" shrub adapter is specifically designed for Hunter sprinkler nozzles, but Rain Bird nozzles will work too. Pictured with a Hunter MP Rotator. Note that the nozzle does NOT make contact with the base of the adapter as to ensure…

Print approx. €0.82–€1.01 excl. taxPreliminary estimate for one variant

Downloads
114
Likes
13
Rating
5
P
PrintablesMordiev

Desiccant block for Rubbermaid drybox

This desiccant block fits the rubbermaid 21 cup containers. It has strong walls so it can support 1 Kg spools easily. Print Instructions: YOU MUST FOLLOW THE PRINT INSTRUCTIONS!!! Print using ZERO top and bottom layers (REQUIRED.) Use 45…

Print approx. €4.59–€5.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
114
Likes
27
Rating
5
P
Printables3DHippo

Rubber Duck USB Stick

I used this Rubber Duck Model from Thingiverse. Enjoy it. Just stick the USB Stick into the duck and push or glue the right and the left halfes together and enjoy. UPDATE: I added a ducky Modell to fit the HAK5 USB Rubber Ducky If you…

Print approx. €4.08–€4.98 excl. taxPreliminary estimate for one variant

Downloads
98
Likes
30
Rating
0
P
PrintablesMilan98

Čísla na PTFE trubičky MMU3 - Numbers on PTFE tubes MMU3

Tištěno bez podpěr - Printed no supports

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
20
Rating
5
P
PrintablesPeter Farell

Anatoliy Trubin : Benfica Goalkeeper

Anatoliy Trubin : Benfica Goalkeeper In a moment that has immediately entered Champions League lore, Benfica goalkeeper Anatoliy Trubin scored a historic 98th-minute header to secure a 4–2 victory over Real Madrid on January 28, 2026.…

Print approx. €6.48–€7.92 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
11
Rating
4
P
Printablessh

Rubik's cube stand

Info: Simple stand for Rubik's cube my son got one cube with a stand (visible on the background of some of pictures), so I modelled the same shape Print info: variants: without bottom holes: no supports needed with bottom holes supports…

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
18
Rating
5
P
PrintablesKilan75

Gommino per freccia Kawasaki-Rubber for rear turn signal for Kawasaki Er-6F

Supporto freccia realizzata per un amico, che non trova piu' il pezzo in vendita. La parte interna e' stampata in materiale Asa e la parte esterna e' stampata in Tpu 85 Shore . La parte interna si aggancia tramite 2 viti al parafango…

Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
6
Rating
0
P
PrintablesBudgy Nebula

Back Rub Ticket (Snap or Flex)

Back rub ticket. Updated to Rev1 to make “GOOD FOR” the same depth as “BACK RUB” so that they are equally pronounced. *If printing the single ticket "ticket-rub-Rev1" .STL model, scale JUST the Z-axis to 60% for best thickness. 5 walls…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
10
Rating
0
P
Printablesbaph

crazy rubic box

WARNING - 3 PAUSES DURING PRINT - ONLY FOR CRAZY PEOPLE No glue needed ! Must to have ! Only in 0.2 layer or 0,1 if you are strongly crazy. Print first all 6 colors before printing the box and be carefull when you remove colors of the…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant

Downloads
49
Likes
13
Rating
0
P
PrintablesrojoPrint

Rubbermaid 21 Cup Drybox Base

This is a remix of @MysteryDough_5648 Filament Spool Stand to suit my needs (and maybe yours). Thankfully the original creator posted the .step file which allowed for easy remixing. The Rubbermaid 21 Cup container makes a good dry box. I…

Print approx. €5.91–€7.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
42
Likes
7
Rating
0
P
PrintablesGordyt47

Coddle to make oval rubber mold

Coddle to make oval rubber mold Print the coddle then fill with silicone rubber demold and fill with colored resin. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament:…

Print approx. €2.34–€2.85 excl. taxPreliminary estimate for one variant

Downloads
33
Likes
2
Rating
0
P
PrintablesRPK

Reflexhammer / Rubber mallet

EN: Reflex hammer with chamber for brush and needle for sensitivity testing. The cap nut on the hammer head is size M8. We recommend inserting / gluing washers of sizes M6 and M8 into the hammer head before attaching the TPU parts for the…

Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant

Downloads
24
Likes
5
Rating
0
P
PrintablesКирилл

Chevrolet Blаzer money box for Russian rubles-Монетница для шевроле белйзер под Российские рубли

Монетница в Chevrolet Blаzer для Российских монет номиналом 10, 5, 2 рубля

Print approx. €2.41–€2.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
24
Likes
4
Rating
0
P
Printablesmartin_pihrt

Zátka na potrubí 150mm

Koncová zátka na potrubí vzduchotechniky (vnitřní průměr 150mm)

Print approx. €7.12–€8.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
24
Likes
2
Rating
0
P
PrintablesLOCKit

Desktop longfill e-cigarette bottle parametric stand | long fill | optional rubber pads placement | remix for Drag H/M/Q/S/X series

This really helped me get rid or a mess on my desk from vape accessories. Let me know if you like it for your setup and post your device base dimensions. I'll make one just for you :-)

Print approx. €5.74–€7.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22
Likes
6
Rating
0
P
PrintablesBlackFury

Rubber Band Organiser V2

This is an better version of one of my first models . It is an organiser for rubber bands. I have accumulated quite a few that come with vegetables from the grocery store and instead of being a disorganised mess in the drawer, I designed…

Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
2
Rating
0
P
Printablespipo

FruBlu Bubble gun bottle connector replacement

Replacement part for the Fru Blu bubble gun (I'm sure it's sold under other brands too) for connecting the bottle with the bubble fluid. The original bottle connector is thin and can be damaged if dropped.

Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22
Likes
0
Rating
0
P
PrintablesOldaK

příruba na skleněný mixer sencor

Příruba na skleněný mixer sencor (foto je jen ilustrativní) Vyrobeno pro známého, typ přesně nevím.

Print approx. €5.62–€6.87 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
0
Rating
0
P
PrintablesJosef Drapák

Krytka pro drenážní trubku DN 50 / Drainage pipe cap DN 50

Výplň 20%, bez podpěr a límce. Materiál PETG

Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
16
Likes
0
Rating
0

Sponge / Soap / Steel Scrubber Holder - Organizer

It might need to scale at 10%. No support needed.

Print approx. €12.25–€14.97 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
4
Rating
0
P
PrintablesPavel Hanuš

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
0
Rating
0
P
PrintablesPieter Koenen

Dry Food Dispenser - Variable Dosage - Rubber Blade Gear Redesign

The Zevro dry food dispenser only allows a fixed dosage per portion. But what if you want to offer less, for example half a portion? This redesign allows just that. You can use the supplied raised decks to vary the dosage. They reduce the…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
10
Likes
2
Rating
0
P
PrintablesThisfact

Rubber Band Gun (Print-In-Place)

Rubber band gun thing: Something i was planning to finish for a while but had been stuck on my hard drive for too long, It's a pretty simple design with an escape mechanism that shoots rubber bands when you pull the trigger. UPDATES : Feb…

Downloads
29,966
Likes
3,788
Rating
4.55
P
PrintablesFunFunBoy

Nozzle Scrubber with a Little Bucket for Voron 2.4

This is a brass brush nozzle scrubber with a bucket for Voron 2.4. It has 2 parts which connect together with standard 6x3 Voron magnets. Printed without support. Designed to fit 300mm Voron 2.4 but could be used in 250mm or 350mm Voron…

Downloads
19,324
Likes
985
Rating
5
P
PrintablesBrawlybanana327

Rubber Band Plane

Instructions: Print flat on build plate at 0.2mm. No supports/brims needed Let build plate cool sufficiently before removing from bed. To assemble: Flip it so that the protrusions face down Bend the vertical stabilizers up 3. Adjust the…

Downloads
15,844
Likes
2,490
Rating
4
P
Printablesmaskedjoey

Rubber duck

Made it to lay flat on the print bed and smoothed the wall

Downloads
13,039
Likes
515
Rating
4.91
P
PrintablesAnton Granata

The World’s First Working Print in Place Rubik’s Cube

The worlds first, print-in-place, no support 100% printed, Rubik's Cube. This Cube is fully functional right off the build plate. Plain and simple. Slicing I would not recommend slicing this design on your own. There will be a pre sliced…

Downloads
11,840
Likes
2,295
Rating
3.79
P
PrintablesColeH

Peeing Scrub Daddy Holder

Self draining scrub daddy holder. Printed with 15% infill and supports to baseplate.

Downloads
10,326
Likes
548
Rating
4.5
P
PrintablesJallim

Rubberband Submarine - Print in place

Needs a properly tuned printer for the tight clearance. Before printing full submarine printing clearnance test is advised. Print both parts, add bolt to front of submarine, lastly add rubberbands. For best spin, try adding more…

Downloads
10,235
Likes
3,911
Rating
3.91
P
PrintablesMyuto
18+

The source marked this model as adult content.

Downloads
9,204
Likes
2,378
Rating
4.44
P
PrintablesLevi Sitts

Floating Rubber Duck

I stretched the duck width-wise to make it wider and more stable in the water. I think it also looks better this way since most rubber ducks I've seen are quite wide and look almost round from above. The attached 3mf file is prepped with…

Downloads
8,770
Likes
525
Rating
4.95
P
PrintablesAdam L

Super Screw Scrubber: A Sensational Solution for Sparkling Screws (Brushy Edition)

Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove…

Downloads
8,015
Likes
3,241
Rating
4.92
P
PrintablesExtrutim

Doorstop Multimaterial | Door Stopper Multi-Material | Rubberized Door Stop

A simple doorstop for multi-material printing! Intended to print the contact surfaces from flexible filament, of course this is not a must ;) As flexible filament doesn't really bond well with e.g. PLA, the two parts are slightly…

Downloads
7,426
Likes
2,062
Rating
4.92
P
PrintablesKevinHaeusler

Atlas Rubik Cube Holder

Atlas Rubic Cube Holder for standard 56mm 3x3 Rubic Cube (should hold other cubes in similar dimensions as well, like the larger metal puzzle cube picture). Requires minimal Support for the Head, Butt and arms. If your printer does…

Downloads
6,811
Likes
1,443
Rating
4.78
P
PrintablesFADesigns

Mag Fed Rubber Band Gun_2

***OUTDATED VERSION*** Find the new model here: This is an update to the Mag Fed Mini Rubber Band Gun. I have redesigned four parts to stop the back hook from jamming when pulling back the slide. The parts changed are the Grip, Insert,…

Downloads
6,768
Likes
3,466
Rating
4.08
P
PrintablesIan F
18+

The source marked this model as adult content.

Downloads
5,718
Likes
1,112
Rating
4.87
P
PrintablesGaryMo

Scrub Daddy Holder

My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water New version here with print in place jointed legs…

Downloads
5,659
Likes
777
Rating
4.85
P
PrintablesMicah T

Fun Rubber Band Glider ≈4g

This model is a remix of another glider but I wanted to make it faster so I designed a hook for it. I went through 4 iterations of the hook to make it strong enough to withstand hard impacts. I've printed more of these than I can count,…

Downloads
5,193
Likes
881
Rating
4.4
P
PrintablesEJTH

Rubber Band Gun MKII - No assembly required!

Updated version of the MKI which fixes some issue with slicing, tolerances for easy print etc. Introducing “The Elastic Eagle MK II” - This is a rubber band pistol that doesn't need any assembly. I found many 3d printable rubber band…

Downloads
5,118
Likes
373
Rating
4.58
P
PrintablesGaryMo

Scrub Daddy Holder with Jointed Legs

My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water This is a new design with print in place jointed legs, in the original the legs clipped on…

Downloads
5,072
Likes
378
Rating
4.87
P
PrintablesFADesigns

Mag Fed Mini Rubber Band Gun

***OUTDATED VERSION*** Find the new model here: I have spent a few years iterating this project. Finally it is fairly simple and reliable. This rubber band gun shoots bands from a MAGAZINE. It uses small “rainbow loom” bands, which allows…

Downloads
4,951
Likes
2,596
Rating
4.5
P
PrintablesAustin Hansen

Articulated Scrub Daddy Sink Holder w/ Drain

Print-in-place articulated Scrub Daddy sink holder designed for easy, support-free FDM printing. Prints in about 2.5 hours and uses roughly 45 grams of filament . Articulated legs hang over the sink edge, arms support the sponge, and a…

Downloads
4,653
Likes
548
Rating
4.96
P
Printablesremmulegguh
18+

The source marked this model as adult content.

Downloads
4,554
Likes
1,329
Rating
5
P
PrintablesTech Tastic

Quick Rubber Band Gun

A remix of a very simple design, I increased the shoot per load from 3 to 4. I also made hollows in the body to decrease material usage. There is also a notch for adding an optional small rubber band, inside the body and trigger, hidden…

Downloads
4,203
Likes
254
Rating
4.68
P
Printablesuhltimate
18+

The source marked this model as adult content.

Downloads
4,161
Likes
1,056
Rating
4.87
P
PrintablesSuper 25

Paw Patrol Pack - Chase Marshall Rubble Skye...

Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Any Brown Filament material:PLA Notes: 0.2 mm layer 0.4mm nozzle 3 perimeter 0% infill 1mm retraction 0.4 Z-hop 50 perimeters speed 215C temp…

Downloads
4,031
Likes
215
Rating
4.88
P
PrintablesJAV3D

Mülltonne, Biotonne, Restmüll 80l Maßstab 1:6, 1:12, LEGO, Spurweite H0, Trashbin, Trash can, Garbage bin, Waste container, Rubbish bin, Dumpster, Refuse bin, Garbage, receptacle, Litter bin, Dustbin, Waste bin

Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…

Downloads
3,995
Likes
564
Rating
4.83
P
Printablessamsuchin

Rubber Band Powered Plane

This Rubber Band Powered Paper Plane will soar through the air, perform awesome stunts and more! An awesome toy for the Great Outdoors and even inside! (with caution) Materials: THIS Paper Airplane (…

Downloads
3,622
Likes
474
Rating
4.25
P
PrintablesJoeRixon

Stable glider V7a + Notch for rubber band launch (50m+ range)

This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…

Downloads
3,326
Likes
365
Rating
4.94
P
PrintablesWilko_SLO

Rubber Band Eagle Airplane

Print with PETG and take different color for the Fuselage. Use kitchen elastics for Slingshot. Build instructions: First put Wings in the Fuselage Then, Input 2x m8 nut into Eagles eyes (its purpose of weight) and build parts together. It…

Downloads
3,177
Likes
393
Rating
4.4
P
PrintablesTwotone74

7 Segment Mechanical Counter, Version 3.0 NO-RUBBER-BAND-MOD

UPDATE 12/2025 As some users reported that the springs become weak after a while, I reinforced them. I didn't test them so far, as my original version still works fine. But I hope, this improves the model and I'm looking forward for your…

Downloads
3,062
Likes
1,045
Rating
4.72
P
PrintablesSanford Prime

Semi-Auto Rubber Band Gun - Fully Printed

A dive into the past, we all had one in our younger years... well most of us anyways. You'd be lucky to find one in between all the NERF guns in the isles today. I was having trouble finding one, so it was time to hop on CAD and make my…

Downloads
3,039
Likes
325
Rating
4.83
P
PrintablesYuval

Compact Rubberband Spiderman Shooter (Web Shooter Style)

print in 0.1 to 0.3 layer height, prob best with petg or pctg but used bambulab pla+ basic print in place recommended: print with brim and supports works the best

Downloads
2,989
Likes
266
Rating
3.86
P
PrintablesSurfalex2000

Prusa XL series: Nozzle Scrubber / Brush (UPDATE: included position marker, added 2x redesigned debris bucket)

It cleans the nozzle every Time in get parked. Also great for Tool changer, since it then cleans every Time.No need to adapt gcode or Change the settings! 13.11.2023 Added 2x redesigned and optimized (for 0.6mm nozzle) debris buckets…

Downloads
2,909
Likes
594
Rating
4.88
P
Printablesroman_hegglin

Rubber Duck - Voronoi Style

Rubber Duck in Voronoi Style. I don't think it swims well in water, but it would be nice to print anyways! Category: Animals

Downloads
2,820
Likes
369
Rating
4.85
P
PrintablesMartin_au

Rubber band plane

An attempt to make a rubber band powered plane. Easy and quick print. Doesn't fly well though. It might need a lot more thrust. I hope some of the ideas are useful to others. To assemble, run a rubber band through the prop, insert the…

Downloads
2,689
Likes
348
Rating
3.4
P
PrintablesTHE MOC CHANNEL
18+

The source marked this model as adult content.

Downloads
2,657
Likes
1,381
Rating
5
P
PrintablesStefan Heer

Rubber Duck Cord Bead

Easy to print and perfect for any hoodie! A chic accessory for fashion-conscious people. 😅

Downloads
2,549
Likes
840
Rating
4.93
P
Printablesmarkury

Rubber Ducky Artisan Keycap

The pre-painted multicolor version for the AMS is available here: https://makerworld.com/en/models/112578#profileId-120559 This version doesn't have enough clearance to be used on all keys, so keep it to a corner if you can. I have a…

Downloads
2,534
Likes
238
Rating
4.74
P
Printables3DontheGO

Rubber Duck Valve Cover

Loved this design, wanted it to make a Valve cover! Can be tight to get on the valve stem at first but keep it nice and straight and it goes on great! Printed this in Yellow PLA at 0.3mm with a little bit of variable layer height on the…

Downloads
2,528
Likes
475
Rating
4.94
P
PrintablesPuhsketti

Flying surprise butterfly toy powered by rubber band

UPDATED to V4. Combined fuselage and hub into one part so glue is no longer required. Simply twist the rotor into a propeller shape using a lighter or hot water then insert the rotor into the fuselage. I recommend using size #8 rubber…

Downloads
2,269
Likes
233
Rating
4.86
P
PrintablesOndrashek

Prusa Core One Feet v2 - Prusa rubber feet reuse

Simply push the original Prusa anti-vibration feet into the prepared hole — it fits snugly and stays in place without the need for glue. Print it without supports! For the Core One L, the feet are compatible, but only with a single screw…

Downloads
2,195
Likes
558
Rating
5
P
PrintablesLoboCNC

Rubber Stamp - Customizable in PrusaSlicer

This customizable rubber stamp prints easily in TPU. Stretch it over the nubs on the handle and you are ready to print! I used block print ink rolled out on a piece of glass for inking the stamp, but a conventional stamp pad should work…

Downloads
2,164
Likes
1,737
Rating
5
P
PrintablesBig Nuts 700

Tic Tac Gun V2 Rubber Band Edition without text

I used Blender to remove text from the parts that had it. I've included the original files from the model in case anyone wanted to mix and match parts or if they want to start from scratch. You can read stuff from the original Tic Tac Gun…

Downloads
2,139
Likes
379
Rating
4.81
P
PrintablesVpslodya

More durable spring attachment for no rubberband OTF

The current mount contains very thin walls, therefore it is very fragile, I redesigned the mount, now it is monolithic.

Downloads
2,118
Likes
258
Rating
4.67
P
PrintablesmoWerk

Small Trash Bag Dispenser / Holder for 35L rubbish bags / garbage bin liner

Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…

Downloads
2,032
Likes
425
Rating
5
P
PrintablesNevermore3D

Nevermore Mini - 3D Printer HEPA and Carbon Air Filtration / Scrubber with VOC sensing

NEW: Nevermore Mini - Basic Assembly (5020) It doesn't need any complicated electronics - just connect a fan you already have (5020, 5015 or 4028) and experience filtration just as good as with all the fancy electronics and sensors!…

Downloads
2,013
Likes
638
Rating
4.59
P
PrintablesJackson

Rubber band gun, 6 shots.

rubber band gun. 6 shots.

Downloads
1,996
Likes
531
Rating
1
P
PrintablesMechaRaptor

Rubberband Butterfly

This rubberband butterfly toy is a fun and engaging way to entertain children for hours! Simply wind up the rubber band and watch as the butterfly flutters its wings and takes flight. Perfect for outdoor play or indoor fun, this…

Downloads
1,924
Likes
259
Rating
4.4
P
Printablescolinodell

Low Poly Rubber Duck

Make sure to generate supports when printing!

Downloads
1,918
Likes
257
Rating
4.5
P
PrintablesFunFunBoy

Rubik's Cube Stand

Rubik's Cube Stand Category: Puzzles

Downloads
1,917
Likes
107
Rating
4.81
P
Printablesjinetix

Voron 2.4 Silicone Nozzle Scrubber w/ Sheet Stops (Beacon / Carto Compatible)

What started out as a remix has now been completely overhauled in CAD to require a bit less Y-overtravel and be a bit more robust. If you are here to reprint a specific part, or using parts from other remixes, it may not fit together…

Downloads
1,894
Likes
346
Rating
5
P
PrintablesAnton Granata

Rubik's Cube (100% 3D Printed)

This was the longest design I have ever worked on. I started the Rubik's Cube design about a year ago and have attempted this print with 1 other printer. No success. I then scrapped the design and started over. This design has less flaws…

Downloads
1,882
Likes
420
Rating
4.13

TPU Rubber Duck | Compatible with The Squeaker! by SpoolDesigns | 3D print your own squeaky toy!

3D print your own squeaky toy! To celebrate the launch of "The Squeaker!", a fully 3D printable squeaker by @SpoolDesigns , I sculpted a rubber duck to turn into a squeaky TPU duck! Learn more on my website:…

Downloads
1,876
Likes
274
Rating
4.55
P
PrintablesMalte

Melting Rubik's Cube (multi material)

Inspired by a shirt worn by Sheldon Cooper on the Big Bang Theory, I've designed a Melting Rubik's Cube ;) This is a 5 color print for the Multi Material Upgrade 2.0. A single file for manual painting is also included. Print instructions…

Downloads
1,861
Likes
360
Rating
4.97
P
PrintablesVisthum

Rubber band Bow - Toothpick + Cotton swab

Easy to print Rubber band toothpick bow You can use any toothpicks up to 2.7mm diameter (The barrel hole is 2.8mm). Recommended rubber band dimensions = (1.5mm thick - 50mm diameter). Even larger or smaller rubber band works. There's 4…

Downloads
1,855
Likes
466
Rating
4.9
P
PrintablesPer

Fully 3D printed Rubik's Cube

There are two verisons. The first prints in one color and has to be painted or stickered afterwards. The second version (All files with "Multicolor" at the end) Is for people who can print with different colors and doesn't require any…

Downloads
1,827
Likes
73
Rating
4
P
PrintablesLoboCNC

Gooseneck Glider (Rubber Band Launch)

After designing my business card glider , I decided to try an all 3D printed design. Taking a lot of inspiration from exosequitur's collection of gliders , I came up with this smooth gliding design that just fits on the bed of a Prusa…

Downloads
1,764
Likes
174
Rating
5
P
PrintablesAqua

Rubber band pistol

Everithing is 0,3. only wheel is 0,10(not important) and screw is 0,20. When printing barrel use 60% infill for barrel and straight pattern. Barrel can bend on pressure. Added bolt with smaller radius to fit better.

Downloads
1,755
Likes
348
Rating
4.85
P
Printables3Dominik

Rubiks Cube

27 piece rubiks cube you can 3D print. I made this model by tutorial from YouTube.

Downloads
1,748
Likes
94
Rating
2
P
Printableshassan almalki

Rubber gun

model in fusion 360 , printed PLA at 300 great fun

Downloads
1,731
Likes
131
Rating
4.83
P
PrintablesHibernatingFish

Beyblade X String Launcher Rubber/Grip

NOTE: The STL of this model is free for non-commercial use - you are free to print as many as you want for yourself or friends, so long as there is no monetary exchange. Feel free to use this model as a basis for remixes to make grips of…

Downloads
1,725
Likes
88
Rating
5
P
PrintablesSebastian

Rubber band gun (6 shots)

Since I always get asked if I 3d print guns... I decided to design a rubber band gun (for Anna). You need: 8 times M4x10 screws 2mm diameter metal pins: (or 2mm thick nails) 3 times 25mm long 2 times 10mm long Download the barrel from:…

Downloads
1,701
Likes
395
Rating
4.89
P
PrintablesPeliX3D

Tiny Rubber Band Gun V2 (print in place)

I changed all of the tolerances to make the print easier. I've also made the trigger thicker to be more stable!

Downloads
1,700
Likes
75
Rating
2.5
P
PrintablesCalAmityWitch

Rubber duck

Behold! A duck.

Downloads
1,694
Likes
101
Rating
5
P
PrintablesZach

Tree Branch / Shrub Armature - D&D Scatter

A set of several Baby's Breath (Gypsophila) twigs perfect for creating or adding detail and body to your tabletop trees, shrubs, or other flora! The PLA is thin enough to easily heat and bend into whatever shape you want, and they look…

Downloads
1,668
Likes
286
Rating
5
P
Printablesuhltimate

Underwater Torpedo with Toroidal Propellers and Rubber Band Motor

Dive into the depths with this groundbreaking 3D printable underwater torpedo! Powered by a revolutionary rubber band motor encased within its sleek design, this torpedo boasts toroidal propellers for unparalleled aquatic maneuverability.…

Downloads
1,550
Likes
470
Rating
4.8