1,681 models
01 - Summary A simple reusable tie fastener to organise cables and other long objects. It features 1-12 holes with lengths 40-205mm for great versatility. Unlike other cable ties, this puts ease of use first, with a simple fastening and…
COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…
Model has been updated for newest rolls that are 80mm in diameter and have a notch cutout. I recommend printing a layer height no more than 50% of your nozzle size(ex. no more than .20mm layer height for .40mm nozzle). Printing any higher…
This mask can be used with a piece of textile or cotton pads as filters. You can also use it as a respirator if you have respirator filters. It's better to print with PETG or ABS so you can wash it in a dishwasher. Please print at 100%…
This is a press-fit Pi 5 case, with customisable options for vents and ports, that also supports the optional active cooler. V1.1 has more tolerant clearances, less crush ribs and a slight taper to the longer pins. V1.2 has no specific…
parts size adjusted for easier storage
Use any floss at least 6" (150 mm) in length. Floss on the Go! Rip, Wrap, Snap, Floss! How to Wrap: Can be Re-used! 1pc Prints in 7 min. 6pc Print in 1 hr.
Here is a set of 10 different reusable zipties. You can print them in place. You do not need TPU, just use PETG. These with the lower amount of peaks are more flexible. Have fun with it.
This is another drawer organiser. It is simple and flexible The features are: Customizability. Create your own sized boxes to fit your drawer. The inside edges are rounded for easy cleaning and easy taking out small objects. The outside…
I made this model because my partner loves gardening, and hates single use plastics. It drove me crazy that one of the easiest ways to start seeds is in those awful thin plastic cups that pretty much get destroyed after one use. This…
Here we have a customisable proclamation display, as seen in the Harry Potter series these can be mounted on the wall via nail and chain, or command strip. They can also be used as Xmas tree decorations the key part, is they are…
No supports necessary. Holds 2 sized straws 6x smaller straws: 6mm diameter 6x larger straws: 7.5mm diameter + 2 hooks for brushes.
A container to safely dispose of double edge razor blades. Print settings Material: PETG Layer height: 0.20 mm No supports. Notes Print upside down with the one-way blade slot on the print bed.
Reusable ziptie cable organizer in various sizes. Perfectly flexible from PLA. Material saving. Only 0,7g for 100mm or 1,4g for 220mm. I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Ziptie needs to be printed with 100%…
If the ice scraper no longer works, you can hang it on the Christmas tree. Or print without this scratching edge and you'll have a Christmas tree ball straight away. And if you scale them by a factor of 40%, you get nice earrings. Use…
This reusable zip tie set is designed for PLA and can be opened and reused multiple times without breaking ♻ ⚡ Each zip tie uses only ~0,7g of material and takes about 4 minutes to print, making it fast and efficient to produce. 🔧 Perfect…
Holds a stack of wide mouth reusable lids for mason jars (not the rings and sealing lids for canning, it probably does hold them just fine but I designed this specifically for the reusable screw on lids that you'd use for like the fridge…
Just a little remix of Aeonfly's iPhoneX Case (https://www.prusaprinters.org/prints/47675-iphone-xxs-hullecase). This version allows you to design your own custom back plate. Since my starting point was an STL-file there may be a few…
Material PLA Easy print Text inside is fully customisable by your wishes, the .sldprt of the print will be uploaded here You can put layer hight to 0.15mm for better details but for me it was not necessary
This is a parametric design for a hexagon patterned keyring. The face has customisable name and phone number text, the hex pattern, main body size/shape, and all dimensions are fully and easily customisable in fusion 360 using the “user…
Description This model uses the QR Code generator that is available here . Most iOS and Android devices should be capable of interpreting the QR code and will link to Instagram by scanning the code. --- To make your own sign: Open this…
Reusable spools are great! That is, until you end up with a small amount of filament left over. With a large model, I prefer to use a fresh spool of one colour - what do you do with the leftover ~200g of material? Enter - the mini…
A super easy and quick to print label - reusable in endless situations This label has a scalable design if you want a specific dimension !!!
The attached openscad file allows you to: select 1 or 2 lines of text set the text for each set the fonts set font size set character spacing Printed with PETG at 0.2 for flexibility, adding a layer change at 1.2mm height for mine.
Disposable Grip designed to fit the CRITICAL TORQUE PEN MACHINE . See article below for sanitization recommendations: https://help.prusa3d.com/article/prusa-face-shield-disinfection_125457 Recommended Print Settings: PETG 0.2mm layers 3…
I like the original toothpaste squeezer design because of its simplicity. However I needed a different width and also a different thickness. It was easiest way for me to quickly re-engineer the design in Fusion 360 with 2 changeable…
Tired of tangled cords, messy desks, or scattered tools? This 3D-printed reusable ziptie is here to keep things tidy! Designed with a sleek lever-lock mechanism, it automatically secures your items with ease. Whether you're organizing…
This reusable filament spool is designed for the environmentally friendly ECOrefill filament . The filament is delivered without a spool, held together with zip ties. The idea is that you print your own reusable spool to help conserve the…
A stand for holding disposable razors. The included g-code is for PETG, but this can be printed in other materials too.
Use at your own risk. This is a demonstration of makeability. I do not recomment using the product for nutrition. Be aware what you are doing. If you like to use the product for drinking, use a filament which is allowed for alimentation…
PLEASE NOTE this has not been certified and was simply to be used in the case of nothing else. If anyone can help certifying I would hugely appreciate this. With the current chaos I was busy printing loads of the Prusa covid face shields…
Behold the fantastically emissive Prusament CORE Matrix LED array! Built from a NEW Prusament spool and WS2812 LED tape, each and EVERY hex cell is precisely populated and illuminated with a single LED! Drive it with ESP32 running WLED,…
It requies some little file work to match correctly base-heads. Sliced with Cura 5.6.0. Supports needed.
This replacement part and a zip tie fix the front SKS mudguard of my bike to the metal holding rod. The original clip was worn, loose and rattling, and finally broke. The replacement saved my mudguard and will probably outlive the…
This Individually addressable LED Strip moves up and down along with the X-Gantry, giving it the ability to light what's most important, your print. A button attached to the Microcontroller allows for easy toggling between Off / Reactive…
Closable Ashtray Model by Dipling on Thingiverse. Original link here: https://www.thingiverse.com/thing:4758457 I did not create this model, if you would like to credit the owner please go to the link above and do so there. Thanks! I…
Box for disposable razor gillette venus 3
I made this to organize my USB Novas. You can edit the OpenSCAD file to change the size(s) and layout. I exported a USB-A and USB-C version. But keep in mind that I made these specifically for my own products. These are not…
Intro Add instant fun and movement to any celebration! This Reusable Party Decoration is lightweight, flexible and eye-catching. Bring color and motion to your party, event or kids’ room. Designed specifically for easy 3D printing , they…
for other tap sizes use this link https://www.printables.com/model/970766-gridfinity-m10-m12-tap-storage-colapsable Printing Instructions Print in PLA The text is added in prusa slicer if you use my print files it will be there but i…
UPDATES 17-10-2026 - Updated the spool profile to reduce the gap between the spool wall and filament, preventing filament from getting caught/snagged. (Note: This issue only affected a few specific filament refill batches, but the…
Remix from https://www.thingiverse.com/thing:1333056 Modified to add "guide slots" in bottom of socket for pins that require them. Not having other sockets with the right pin width for the collection of modules I have, a technique I used…
Write the name on it with marker.
A simple 3-bladed paint stirrer which uses common/cheap dowel rod for a shaft (friction fit). Perfect for using up the last few meters on a spool of filament. Fully reusable, but cheap enough to throw away [almost] guilt-free. Just drive…
Drawstring bead of printing infill examples. Customise to your liking by changing the infill type or density of the pattern! Example print file uploaded using two colours. For a single colour, use the same file but print using a single…
Two sizes of the bottom part: the height of the lower box is 50 mm, the height of the higher box is 70 mm.
Simply cut out a sponge and wet it with a little stamp ink. You can edit the StampCustomize.f3d file to create your own customised stamp. The stamp and the handle can be printed without supports. The cap works better with supports.
Overview: Tired of 2L soda bottles collapsing and crinkling in your self-watering pet bowl? DriftJug mini is the sturdy, reusable solution that won’t deform, leak, or look terrible over time. Designed to keep water flowing smoothly for…
I made this model because I wanted to start buying refills instead of whole spools but didn't want to buy reusable spools or use 200g of filament to print a reusable spool. I printed mine with a .8mm nozzle, .3mm layer height, 1…
Il manquait la lettre V au modèle original
This case will hold 4 re-usable straws or 3 straws and the cleaning brush. Keeps them clean and safe, but still provides airflow so they can dry out and not get moldy. Prints flat, but requires (2) 4-40 screws for the hinge. Designed with…
Whether you're piping rosettes, swirls, meringhe, borders or classic star tips, this nozzle offers an alternative to disposable or metal tips; easy to clean and reuse. Features: Produces star shapes Easy to print, no supports needed Great…
This design improves the original Bambu Lab reusable spool holder in the following ways: Allows you to see how much filament is left on the spool and uses less filament to print the spool due to the hexagon pattern on the sides. Also, the…
Support the Creator If you'd like to sell this model as part of your business, please consider supporting my work by purchasing a licensed version here: Licensed Model on Patreon Latest Update – 4/1/25 Thanks to the awesome feedback from…
Print with PETG Z=0,2 ON MK3, MK4 you can print 24 pcs at once. Designed that Size fits to be printed on MINI too. If you have problems with detach zip ties from the bed, you can use:…
“v2” version has no label area in case you want to save even more filament. Otherwise, print the “v3” versions. The original Bambu Lab spool holder works well but takes a lot of filament and is missing a few nice features, such as being…
If you'd like to sell my model for your own business, please consider supporting me and acquiring a licensed version of the model here: Licensed Model on Patreon If you like this model, please consider printing the full sized semirobot…
This is a print inspired by the funko pop figurines. It has the exact dimensions of a male funko pop, ready for your customisation. You may need to scale it up to 2700% to get a realistic size. Print Instructions: Infill: 15% Layer…
I have combined the best features (in my opinion) of three previous remixes of the Bambu Lab spool. I started with the refactored “Bambu X1 Re-Usable Spool” as a base, then added the best features of the “Improved Bambu Lab Reusable Spool…
Cutlery Kit Card – Knife, Fork and Spoon. A compact cutlery kit card combining a fork, spoon and (child-safe knife) in a single, lightweight design. Created with a focus on comfort, compactness, and fast printing . The card format keeps…
This mini mixing pad is designed for fast, mess-free glue and epoxy work. It features a built-in snap-off mixer and a smooth, disposable surface ideal for small repairs, woodworking, crafts, and general workshop use. Prints flat, no…
This is a print inspired by the funko pop figurines. It has the exact dimensions of a male funko pop, ready for your customisation. You may need to scale it up to 2700% to get a realistic size. I recommend printing it upside down for…
UPDATES: 2023-01-19: Added the option to change the total height of the hook and save space. The parameters will automatically calculate home many vertical hooks are needed. The hook is placed at lower ¼ of height. 2022-10-14: Fixed the…
I was about to make the beloved hex scraper (since the one that came preloaded on my X1C was kinda garbage) but I thought to myself why should I print a nice scraper if I'll have to print a full one again every time the blade goes bad.…
Giant Vase Spider - posable halloween print in vase mode! Big size (40cm and up to 90cm), nice finish, low material (only around 110g) and low time! If you like it --> press like it :-) License & Usage Free to download Private use only If…
For the “Last Meters” contest i thought it would be fitting to print something that not only uses a little of plastic, but also something that is actually good for the environment. If personally hate using floss and instead use…
PLEASE LIKE COMMENT POST YOUR MAKES. THANKS! This is my gen 4 print-in-place joint design. My previous designs, with a screw, allowed full ball joint motion but: was sometimes difficult to print because the screw is so small the thin…
The Polymaker Reusable Master Spool is a durable, empty spool designed to hold refill filament coils sold without disposable plastic spools. It allows users to reuse the same spool multiple times , reducing plastic waste and shipping…
This floral lampshade is easy to print and assemble. Designed to be compatible with an IKEA Hemma socket, this lampshade makes for a striking overhead light or can be easily set up as a tabletop accent light. Every petal in the lampshade…
Popular hexagonal scraper - now for defrosting car windows You can choose between a regular version of the scraper (which is in one piece) and a version with replaceable "blades". Both modified to make the scraper stronger and to allow…
It’s my Reddit cake day, and I’m finally sharing something I’ve been using for almost a year : my custom-designed, reusable TPU cable ties . After trying dozens of designs, none of them quite hit the mark. I wanted a cable tie that: stays…
An OpenSCAD script to generate a customisable back horn speaker enclosure. It can be customised to suit different overall dimensions, different drivers (up to two), and different side fixings. It also has a customisable space for…
Update 2025/11/16: Inland and Esun have updated their refill spools, so this spool is no longer compatible. A reusable filament spool designed to work with Inland brand filament refill packs. The two halves screw together.…
LockSpool V3 is a reusable filament spool made from a single part printed twice, and joined together with a quick twist, with a snap-lock to hold it in place. The design can be customized to fit any spool-less filament refill coil by…
They're easy, they're cheap and they can be a lot of fun: disposable cameras. If you still got one around, you can remove the plastic lens from the camera housing and print a lens holder for a Sony E-mount camera. All you need is a bit of…
When I printed the “Bambu Lab Reusable Spool Holder Hex Remix”, I noticed that the printer is kinda bit violent on some sections and upon inspecting I noticed that the STL object doesn't have a proper arc. I also noticed that the print…
This customizable posable penguin makes for a festive fidget toy. https://youtu.be/M_sV88fGf2U Printing All parts can be printed without supports. Add brims if curling is an issue - especially the smaller pieces. Base and middle sections…
You like a clean look and hexagons? This is the place for you :) --- Features & Changes fully compatible and dimensionally identical with original spools removed material for faster and resource friendly printing there are no supports…
I wanted to do a jointed model for the Printables contest. Jace1969 (who has a ton of great SW models) had this ATST model, but it was a solid model so I diced it up and added 14 joints to make it into a posable design. I was trying to…
The TPU Cable Tie Set is a fully 3D printable, reusable cable management solution designed specifically for flexible filaments like TPU. This set includes five different sizes: 6 cm, 9 cm, 12 cm, 16 cm, and 20 cm , making it perfect for…
This thing is a great example of something useful you can do with your printer. It allows you to hang any broom or rake like object using a convenient click in, click out latch. This youtube video shows and example of one in action…
Update 11102022: DOWNLOAD NEW Infill Pattern file, since old one could break more easily. On the spool with infill pattern, I noticed the infill section could “pop out” - Added a “wedge” to make it more embedded. Seems like to two parts,…
If you want to print dummy 13 in 500% scale it is good start to test your printer\filament. This model has print-in-place fingers (500% scale is not easy to assemble) Modified finger joints (added fuzzy skin for better grip) Palm-finger…
A motorcycle or racing helmet with optional visor. The visor can be opened or closed. You should be able to print the helmet without support if your bridges are good. It might need a little post processing if you get sagging filament on…
This is an OpenSCAD model that is designed to be used with OpenSCAD's customizer facility. Width, depth, height, thickness and corner radius are all fully customisable using OpenSCAD's customizer facility. See: openscad.org for more…
I'm working on a 500% scale version of Lucky. The goal is to add details, improvments and my personal touch without change the main design. This is my remix for the hands fingers and palms printed with 10% infill and works great imo The…
This is a funnel designed to work perfectly with Resin Filters from 3DMaterials (https://www.3dmaterials.com/sub/resins.php?ptype=view&prdcode=2109150011&catcode=10000000&page=1&catcode=10000000&searchopt=&searchkey= ) print with no…
Here is another mod for the amazing soozafone model No supports needed Download all other parts from his link
Loved the version 3 and 7 posted by MediaMan3D. They do work well with the V-Spooler from Fryby Additive. https://makerworld.com/en/models/98832 and https://www.printables.com/model/684376 But I needed to adapt it to work with the…
These are remixed posable hands for Easy 13. I used designs from 2 other models to create an updated file for Easy 13. The smaller the hands the less chance the design will function as it should. Print at 200% or higher for better…
I wanted a small, simple shaped concrete planter and I was inspired by some great 3d printed planter mold designs out there. This was modeled from scratch and prints without supports. I've reused the same mold multiple times without…
Highly articulated 3d-printable action figure. The SUBSTRATUM PROTOBODY girl is a base figure utilising the SUBSTR joint system. This joint system allows for easy interchanging of parts and the vast possibility of creating different…
Simple easy print storage boxes, print great on 0.4mm nozzles. Made in openscad and fully customizable(comments in code). Use recycled pop bottle lids to reduce waste(a printable lid is included in case needed). This have a very good seal…
Remix of the original Bambu Lab reusable spool. Reduced the material used for the side walls to a minimum while keeping overall strength and rigidity resulting in ~20-25% less print time and material usage. With the open design you can…
***********V2 NOW AVAILABLE*********** Reusable Cable Tie / Zip Tie - Easy to use This easy-to-use cable tie is perfect for organizing and securing your cables. It ensures your cables stay neatly in place or within a bundle, whether under…
EN: Since I wanted to construct various holders and test them before printing, I created the hole pattern of the Skadis walls from Ikea as a step file. V2→ Now as a composable version for larger areas Da ich mir diverse Halter…
15-JAN-2024: Added model with a flared gap
Collapsable fidget Santa's hat. A cool Christmas decoration. It looks nice and is fun to play with. It's very easy to print. No supports, etc. When you print the hat in red, you should change the color to white on layer 106. Unless you…
The ELEGOO filament spools are made of pressed cardboard, which is abrasive, has low friction, and creates a lot of dust when printing, so I adapted the project that was created for Prusament refill filament to fit the disassembled ELEGOO…
