Eight Knot Scout woggle. Pasapañuelo o canuto con nudo Ocho
Scarfring or neckerchief based in eight knot
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
- Downloads
- 246
- Likes
- 36
- Rating
- 5
687 models
Scarfring or neckerchief based in eight knot
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Apu Nahasapeemapetilon from the Simpsons.
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for one variant
GCode File Description: Flow Calibration for Prusa XL with Prusa PLA This GCode file is specifically designed for calibrating the material flow (flow rate) on a Prusa XL 3D printer using Prusa PLA filament. The purpose of this file is to…
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for one variant
Scarfring or neckerchief based in a "Fire" guide badge (for WAGGGS leaders)
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €16.70–€20.42 excl. taxPreliminary estimate for one variant
EN Replacement needle with part number 9670-K for Passap/Pfaff hand knitting machines. An approx. 2 cm long piece of PTFE tube (outer diameter 4 mm, inner diameter 3 mm) is used for improved thread guidance. DE Ersatz Nüsschen mit der…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Print in diagonal, as the model comes. This is the best way to save filament avoiding supports. Its improve the flags details. Use 0.4 mm nozzle and 0.2 mm layer. Two models. The last one is a new version. Enjoy it! ====== Alitas alitas,…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
spodní podložka aku flexy parkside
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Summary This is an adapter to designed to fit over the Nothing Ear speaker and slot into the filter space for a Sensaphonics ear plug. It's also small enough that you can keep the adapter on your Nothing Ear while charging your buds in…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Renault szelepsapka
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Suzuki szelepsapka
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Peugeot szelepsapka
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
his is a digital 3D printable model of an Anatomically Correct Human Skull based on a scan . This accurate skull replica is a perfect Halloween decoration, or simply a wall decoration/shelf display, cosplay prop, headphone holder… The…
SAPPHIRE | Knife Rack Introducing our SAPPHIRE large-capacity knife block (10 knife slots), a rounder version of our OBSIDIAN Knife Block designed to ensure your knives stay dry and are stored safely within arm's reach. There are 5 rows…
Sapo impreso en 3D que esconde el rollo dentro y dispensa el papel desde el interior. Diseñado para quedar espectacular en multicolor y funcionar como porta papel higiénico decorativo. Características Rollo oculto en el interior (papel…
When Roma's enemies hunker down behind trenchworks and fortifications, the legates do not call upon the Triarii to break the walls but the Combat Sappers. Storming from freshly excavated tunnels these men and women fill trench ways full…
Head and bust of Sappho, Greek poet who founded and headed a school for women on the island of Lesbos
Magic Disappearing Coin Box! Inspired by a toy I loved as a kid, this clever box hides your coin with a simple slide. It’s perfect for surprising friends, showing off a cool trick, or just having some fun. Easy to print and put together,…
Upgrade Prusa i3 Mk3 to 3D scanner! Main features: Project prepared for printing on any 3D printer, e.g. Prusa Mk3 or Mk2.5 Electronic components (stepper motors, controllers, etc.) are not required. If you have a printer, then you have…
Magic Coin Disappearing Trick for 1 euro cent Print files coin1+coin3 then print file coin2 with pause and insert coin3 inside. Total time: 40min+30min - 0.3 Layer Fusion360 file added
These are replica SAPI plates to use with airsoft vests, weight vests etc. You can either leave them hollow to give only stiffness or fill them up(I used finishing sealant) to get some weight. The front/back plate is about the size M…
Can we make the best just a little better? Yes - we make it a bit simpler, easier to use and add some grip! My favorite filament clip until today was the “Grandma's favorite filament clip” by Extrutim . There was a thing I did not like:…
12.02.2023. sapphire new version v3 finally go time to print all parts, not just virtually check in fusion 360. Now one of last version 3 is out and belts finally are parallel. p.s. Some printers can be different sizes, gen1, gen3, and…
Update 2/11/24 I advise just using the ZeroG MercuryOne.1 XY joints in their entirety. Use their configurator for spacers based on pulley size. I still advise using Gates oem spec pulleys. Doing this will result in some misalignment of…
I DO NOT technically own the rights to the original character (ming and disappering guy in this case), but this time I created the design of the mesh myself. I ENCOURAGE buying the official stuff from the website here:…
This mount keeps the nozzle in the same place as the stock nozzle, so no loss of print volume on any axis. Uses original mounting system, no extra hardware required. Base model with optional: Dual 5015 ducts Single 5015 duct (remix of…
The original design has a large flat bottom, which for some reason would always sag downwards for me, sometimes colliding into prints. This remix minimizes that bottom surface such that the sag points are eliminated. The bottom is also…
Original Baloo design, smiling while wearing a Scout scarf. For Baloo lovers (like me!). Two versions for easy printing. The diagonal one conserves filament and might enhance certain details on specific 3D printers. No supports needed. I…
3 mignons Gnomes avec un chapeau sapin et une décoration différente dans les mains, 3 fichiers différents. Imprimez avec une hauteur de couche à 0.2 et 20% de remplissage. Vous pouvez les agrandir sans soucis. A mettre dans votre sapin,…
I started using Prusa Slicer a lot more in the past few weeks with great results so i thought i make it look better. For each of my printers i added a custom build plate. This improves looks and it also makes it easier to see what printer…
The Way of the Scout! Embrace the Mandalorian creed on your scouting adventures with this iconic woggle!
Inspiration: Prusament spool 3 parts: 1)The main body 2)The top 3)The PRUSAMENT Easy print Support needed only for the top For the text "PRUSA PENCIL HOLDER", you could print with a change color step. Print instructions The model have…
"Spah’s Sappin’ Mah Sentry!" Thank you to @yksfosoJ for his great sapper model. I remodeled the switches to make them a bit more realistic and removed the pencil holder portion. As well as adding some cups my buddy made to complete the…
4 modèles différents. Décoration de Noel style boule de Noel avec le Père Noel et ses rennes volant au-dessus de sapins, avec ou sans texte. impression avec une hauteur de couche à 0.2 et un remplissage à 20%. Vous pouvez choisir la…
A holder for my Saphe Drive Mini Traffic Alarm. This model fits to the air slots of a VW Passat B8. Printed in PLA with 0.2 mm layers.
Remixed some thingiverse hemera mount for BIQU H@ extruder for my sapphire pro
Two kinda like designs. One with ring, other in a polygonal way This woggle or Scarf Ring represents the worldwide friendship among Guide and Scout movements. On one side, it's got the global Scout fleur-de-lis, and on the other, the…
Ajoutez une touche originale à votre décoration de Noël avec ce sapin modulable ! Son design permet d’orienter chaque branche à 360°, offrant une multitude de formes possible ⭐ Paramètres utilisés pour la fabrication Buse 0,40 mm Hauteur…
With this magical box, you'll be able to make small objects appear or disappear! A prop ready for use by the youngest magicians ;)
Fits in the air duct. Might fit in the Model 3 also - but I cant confirme that I put the soft side of velco on it to protect the plastic but i dont know if thats nessecary. Other soft materials might also work
Hi! This is my complete top enclosure (top cover) project for Two Trees Sapphire Pro (SP-3) with 3D printed brackets and acrylic panels. It could be used with different printers after scaling acrylic parts. Enclosure is high enough to…
Bring the Mischievous Spirit of Stuart to Your Scout Uniform
Electrify Your Scout Spirit and charge up your neckerchief with the spark of Pikachu in this scout woggle design!
I used Nuka Cola Clock by techoutreach for the cap shape but scaled it down and made the hollow in the back conical so its heavier. It'll still accommodate a clock mechanism 65x65x20 or smaller, but there's no hole in the back for…
PLEASE DONATE: https://paypal.me/JuanCMedina21?locale.x=en\_US Acrylic Size. Top: 367x344mm Sides/Front: 357x116mm Back: 327x116mm Threaded Inserts: 2X - M3x6mm (Cable Cover) 8X - M4x8mm (Frame) Screws: 2X - M3x6mm Button Head (Cable…
For VZBot printhead or cnc version you dot need do any changes, but for Sapphire Plus 3D printer you need make some chages. All top cover need turn 180 degree around, my was from factory all ready bend and im not using it. Motor holders…
This fits both the left and the right side of the printer. I oriented it upside down and did not use supports. I printed it in PLA and had some minor warping off the bed. I used a brim and glue stick and it held well enough to finish.…
The mod is for the default Hotend. I want to use the push fitting on outside from the extruder so i made an slightly higher base and not to much waste material. Information for installing: Use 4x M3 8mm screws, the original is to short…
No supports are required to print it. A nice Leopard, Jaguar or yaguareté (Argentina feline) for Wolf Cubs and Scouts. Enjoy it! I'm providing you with the SVG file to make remakes easier. Explore more of my woggle designs and other…
8 Color HueForge model of a “Sapphire” Dragon. Remixed from the remix of the Emerald Dragon. I resized to 200x200 and then re-colored. DO NOT RESCALE IN Z Print at 100% infill with a layer height of 0.07mm with a base layer of 0.2mm…
Ich habe den ersten Druck in PLA gemacht. Ich denke, PETG wäre noch besser geeignet, aber bisher funktioniert es sehr gut mit PLA bei mir. Hält bei mir besser als das Original. Support: JA Infill: 15% Layerhigh: 0,2 Brim: Yes I did the…
It's great first trick. Push the tray with the coin into the box, and the coin has disappeared! You can make it reappear too.
Sapo Concho is Puerto Rico's only native crested toad and is an endangered species. This design is based on the character of the same name in Bad Bunny's album DtMF. I have uploaded two models: One with a square notch in the seat so it…
Uploading my "back catalog" to Prusa Printers! Hope you enjoy this design from 2018: Print one for the person in your life who causes you to make this face on a daily basis! This is my first attempt at sculpting in Blender. Michelangelo's…
I started using Prusa Slicer a lot more in the past few weeks with great results so i thought i make it look better. For each of my printers i added a custom build plate. This improves looks and it also makes it easier to see what printer…
UPDATE I’ve made additional modification on pulley arm, first version was kept in place with the pin(s) but new - ARM 2 has a thread and nut allowing fine(er) adjustment and looks more "civilized". :-) Have seen few attempts to solve the…
Model based on what's mounted on my SP-3. Might help visualize changes / design new hotend setup. Included both mesh and F360 project file.
The Sapphire Pro has a problem with belt-misalignment, so I searched for a solution and found this one made by StoneFPV/StoneTime. I had to remixe it a little, because it didn't really fit my pulleys and the tolerances of the holes were…
The right arm was just mirrored in Cura, I know it's a little sketchy. The BOM: BOM: https://docs.google.com/spreadsheets/d/1CpRTM5ExVKjqFqKXyHM_BEqhV6jeapgpBublu8SchCU/edit?usp=sharing A longer description will follow...
etoile pour sapin de noel sur le theme de Mario
I wanted a rigid and light weight mount for the BL touch to reduce the variation in z-offset between prints so I designed this one. Y Offset : -40 X Offset : 0 Print Settings Printer: Twotrees Sapphire Plus Rafts: No Supports: No…
Une jolie décoration de Noel façon boule pour mettre dans votre sapin ou autre. A imprimer avec une hauteur de couche de 0.2 et remplissage à 20%. Vous pouvez l'agrandir comme vous voulez.
Simple Rocket, designed and optimised for use with single outline corkscrew printing mode (vase mode) Print instructions Notes: Remember in vase mode to change cooling settings & speed overrides. (otherwise, it will take a long time) For…
Attention, soccer-loving cubs, scouts, and guides! Get ready to showcase your passion for this beautiful team sport with our Soccer Ball Scarfring. This cool accessory is specially designed for cubs, scouts, and guides who are fans of the…
Introducing a 3D model for the Sapo/Rana coin toss game, a traditional game originating from the Andean cultures of South America and widely played in Peru, Colombia, and Bolivia. This model is designed to bring the thrill of this outdoor…
Joyeux Noël ! Sapin de Noël modulable, sapin à assembler. 2 tailles à imprimer sur MK3S ou Mini. Tronc en 2 hauteurs : 209 mm (MK3S) et 179 mm (Mini). Les branches sont les mêmes pour les 2 tailles… 5 branches en plus pour le 209 mm. Buse…
sapin joyeux noel a coller sur sont support ou au mur
Este diseño muestra un sapito kawaii combina un estilo caricaturesco con detalles tiernos. Sus grandes ojos transmiten alegría y simpatía, convirtiéndolo en una figura que roba sonrisas al instante. Perfecto para quienes buscan decorar su…
This new design utilizes the existing Sapphire Plus frame components, and it allows better and more accurate printing quality at much faster printing speeds. This design also allows using VZBot or RatRig EVA printing heads at expense of…
Petit sapin de noël original parfait pour les fêtes de fin d'années. Petit et discret tout en étant incroyable. Il vous suffira seulement de lui trouver une place chez vous et le tour est joué vous aurez un superbe sapin décoratif.…
Une jolie boule avec un noeud et un sapin fleuri à l'intérieur? Vous pouvez l'imprimez en 2 couleurs, le noeud fait 1mm de plus en épaisseur. A mettre dans votre sapin, sur une fenetre, une porte, un mur, etc … Imprimez avec une hauteur…
ИСЧЕЗАЮЩИЕ ОБЪЕКТЫ ВОЛШЕБНАЯ ШКАТУЛКА С ТРЮКАМИ. НАБОР ИГРУШЕК ФОКУСНИКА.
No support required if your printer is well calibrated. I print it in 0.2 mm with 0.4 nozzle. Woggle with the VCP (Verband Christlicher Pfadfinderinnen und Pfadfinder) logo. VCP = Scout and guides (girl scouts) from Germany. I am…
For base Chain to mount Base top left from front view (Top_Cable_Chain_Mount.stl) I used a 10x15mm Cable chain. You can most likely use another. I drilled the holes to match my chain. From top to bottom. Use Either Cable wire holder…
V4 of the printhead is out! https://www.printables.com/model/418000-poison-printhead-v4-twotrees-sapphire-pluspro update log: 06-12-2022: small change to the cooling duct because it was a little too close to the hotend. This is the…
Both of the mounts that come with the Saphe Mini didnt fit in my car, or in the location I wanted to put the device, so I made this one that fits perfectly. The adapter mounts in the existing holes from the device. Printed with prusament…
This leafless lumberer may lend you a limb if you meet them in the forest, but be sure to keep your axes hidden! If you'd like a more fully foliaged tree, get some green craft/hobby foam clumps or reindeer moss and glue them on after…
Scout woggle Scarf Ring neckerchief with Rover badge - Pasapañuelos o canuto con rombo Rover - 2 models!
Print with PETG or FLEX (FLEX is black in the pictures). I increased the vertical shell to 7 layers (.4mm nozzle) for durability. Run 550 cord through the holes. M3 brass inserts for the screws and 20mm screws (I'm unsure on the length…
I've designed dual Z mod for my TwoTrees Sapphire Pro. This mod helps a lot with bed shaking while fast printing and printing with high accelerations, it provides better stability for heatbed. You can also use dual z leveling with this…
This Cherry MX-compatible 2U Backspace keycap is disappointed in your typing mistakes! It's supposed to look like an old school (pink rubber) eraser but it won't look like that right off the printer... To solve that problem you have to…
Two Tress Sapphire Pro Orbiter direct drive mount adapter with cable chain. 2021/12/31 - add orbiter_adapter_v2 - high version Remix: orbiter adapter: https://www.thingiverse.com/thing:4763280 cable chain:…
This fan duct is designed to print without supports as orientated in the .3mf. This fan mount is intended to accompany the Biqu H2 bracket from here:…
You can find two models. One in diagonal that saves filament and improve the details without supports. I print both models without supports with 0,4 and std configuration
Holder for Raspberry PI Camera for Sapphire S and Pro Print as displayed. Only camera holder and beam need support. Print instructions Print everything as in the STL The beam is printed straight up so a brim can used to hold it better to…
Prologue This is a WORKING remix of the SP-5 H2 mount by Lee82UK. The original design had several flaws, including by not limited to: Impossible to mount 2 5015 fans on this extruder and not hit the SP-5 frame. The BLTouch probe when…
Many cheap printers are using the Cheng Liang P360V24W power supply. The biggest flaw of that model is the loud fan inside the PSU. There are a few cover mods on Printables, but they all just work when the PSU facing out of the printer.…
Sapin de Noël photophore, décoration de table et d'étagères DIY pour les fêtes, fichiers d'impression numérique 3D
Print with at least pteg but I personally like PC-CF filament, 4 layers, 4 perimeters and 25% infill will be ok. chain what I got - https://www.amazon.co.uk/gp/product/B09NKSPKS2/ plus you need x6 m4 screws extra plastic inserts, 2x for…
DONATE : https://paypal.me/JuanCMedina21?locale.x=en_US Download the remix files here then print the remaining files from the link below. Connect the fan to PB0/HE1 if your running Robin Nano v1.2 Add command below to Klipper to run with…
All but main body part 1 can be printet without support.
Overview This design lets you attach the Smart Orbiter v3.0 to the TwoTrees Sapphire Pro. My goal was to have a compact design that looks tidy and gives you a good view on the printhead. Also I designed with minimal support in mind.…
This is a cover for the 90 degree versaplanetary drive kit from Vex Robotics. I designed and printed this to cover the exposed bevel gears. The case slides on from the side and then there are holes so you can put a bolt in and secure it.…