3,462 models
News 2024-04-10: Please also check out my new Blade Dispenser for this Bed Scraper: This is the XL version of my popular Optimized Bed Scraper with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer! Each blade…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
It's -8℃ currently where I am. I needed a new ice scraper. It's strong and I've gone through several iterations to get it to feel comfortable in the hand. There are ribs along the handle for better grip as well as a large indentation at…
Print approx. €1.73–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
This modular scraper is designed especially for 3D printer bed cleaning – perfect for removing filament residue, glue, or adhesion products from the build surface. It can be used with a standard Stanley blade or with various 3D‑printed…
Print approx. €3.02–€3.70 excl. taxPreliminary estimate for one variant
A scraper using simple razor blades which is not flimsy or imprecise. The blade is held firmly in place. Please be careful when inserting the blade. Strongly inspired by https://www.thingiverse.com/thing:2024019 Use razor blades such as…
Print approx. €1.12–€1.36 excl. taxPreliminary estimate for one variant
30% infill 0.20 detail http://www.thingiverse.com/thing:3406899
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
I've improved some details from the original scraper. Also, I've added a case for your security. All you need are an M3 8mm screw and a nut. Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 30%
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Bed scraper for little filaments pieces so that your nails don’t have to be used and you don’t over-grease the bed with your fingers. Of course, the Prusa Orange Petg better, it's but on the way right now.=D Update #1 I designed another…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Update (2/27/2020): v2.6 Changed holder leg angle to increase preload when closed so blade is held much more securely now. Added filet to top of holder body. Added Initials on the holder body. After half a dozen prototypes and few dozen…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Please compare the first photo with your slicer before printing. Make sure that your scraper head underside looks like photo 3. If it takes longer than 36 minutes to print, then something is wrong with the slicer settings. Optimized…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Travel tongue scraper Scraper for a few uses, when you travel, you can throw it away and print a new one at home. After printing, pay particular attention to the adjustment of the blade - when I set the layer height to 0.15 or 0,2 mm, the…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Chunky print bed scraper with inlaid hex. It can also be printed with 1T by adding a M600 color change above the inlay. Matches with my XL tool rack nicely. T1 = Frame (Orange) T2 = Hex inlay (Galaxy Black)
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
Little easy to use/print Scraper
Print approx. €5.78–€7.07 excl. taxPreliminary estimate for one variant
Aktualisiert am 20.11.2023: Neue Version "Ausrichtbolzen mit Sechskant" hinzugefügt. Jetzt können die Schrauben ohne zusätzliches Werkzeug angezogen werden. Updated on November 20, 2023: New version "Ausrichtbolzen mit Sechskant" added.…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Intro Winter returns back to the northern hemisphere… Cold days and frosted cars are back… Car owners need a good and stable ice scraper now. And this is exactly what this model delivers! Why you'll love it? Print is done really easy…
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant
3D Printed Mini Bed Scraper (Ultra-Lightweight & Functional) Looking for the perfect project to use up those last few grams of filament left on your spool? This super small, 3g-only bed scraper is the ultimate functional print for every…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Here are two types of bed scrapers. Both take around 1h to print. Simple design. Tried different angles and this was the best for durability. Print at 0.2mm layer height maximum.
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
Tired of scraping ice with a boring old scraper? Upgrade to the Red Devil Ice Scraper and watch that frost disappear faster than you can say 'hot damn!' Sacrifice some high-quality filament such as bloody strong Modified PLA, ASA or PETG…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant
Holder for the scraper from @visle . I used the holder from @orange.printer , but I found it difficult to pull the scraper out so far, so I lost space above the scraper. So I redesigned it and now the scraper can be hooked in. Happy? Buy…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Der Schaber kann ohne Support gedruckt werden. Die Dateien sind für den Druck mit PETG optimiert, andere Materialien sind auch möglich. Zur Befestigung der Klinge am Griff werden 2 M3 Quadratmuttern und 2 M3x12mm Inbusschrauben benötigt.…
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for PETGSource material: PET
The original handle of my scraper was not holding the blade, while I was removing a sticker, so I created more secure handle. The blade can be easily pressed into the handle and sits firmly without play. From above the blade is secured by…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Inspiration: When printing @SH -s 🍂 Organic leaves set I realized that his Round Scraper just needed a bit longer “skirt” to help me out. So Egg Shaped Scraper was born. Just try these leaves from here:…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Simple hexagon printbed scraper with no sharp edges and it is only 20 min print. You can also hang it somewhere :)
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Shawn's original Scraper & Double Razer Blade model includes a very nice handle, but it was slightly narrow for my blades. Originally I simply scaled his up by 2.5%, but I was printing multiple handles and decided to flatten the model so…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
Yes, I designed my own scraper. It is a quick design, simple but effective. At first I didn't think I would share it, since it is so basic, but heck, why not! Designed in OpenSCAD, feel free to use any way you see fit. I printed it with…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
The same great HexScraper , but now with more magnetism! The embedded magnet allows you to hang the scraper on a metal surface, such as a metal desk or the PSU on the side of the MK3/S/S+. The magnet pocket is sized for a 9.5mm x 3.2mm…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
I know there are similar bed scrapers here but I wanted my own one I designed so here it is feel free to use it and make remixes
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for PETGSource material: PET
I find the hex scraper designed by visle very nice, felt like making a few tweaks to have less print time. Enjoy ;)
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Innovative multi-purpose accessory with a beautiful design and functionality. With the replaceable spatula and brush, you can print them whenever they wear out, avoiding the need to reprint the main body. This will save you time and…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
Without supports, without brim, all in one printable. Printed with three perimeters! You can choose between PLA and PETG. Note when using PLA: I have had good experience with Extudr PLA NX2 (no advertising). Have Fun with scraping !
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for PETGSource material: PET
Quickly mocked up this v1 scraper to mimic a certain brown spoiled cook scraper. v2 will be closer to the original dimensions
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
UPDATE: Multicolor file now available. To use the STL, break the object into multiple parts in PrusaSlicer or load in the 3mf file. An ergonomic duck puck shaped scraper to help remove calibration dots and stubborn prints from the bed.…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! This Multi-Tool Keychain is the perfect compact accessory for everyday use. Measuring 60x35x3 mm , it packs a lot of functionality into a small and…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Print in place, bed support, and scrap scrap scrap…..time is money.
Print approx. €2.83–€3.45 excl. taxPreliminary estimate for PETGSource material: PET
to print the one piece scraper pause the print and install the blade with painters tape
Print approx. €1.30–€1.58 excl. taxPreliminary estimate for one variant
It requies some little file work to match correctly base-heads. Sliced with Cura 5.6.0. Supports needed.
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
Ein einfacher Eiskratzer der jedes Eis bricht :-) A simple ice scraper that breaks any ice :-)
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
I only removed the sides of the HexScraper and scale it down to fit the same siza on the extrusions of the Prusa Mini+. Works well together with the Prusa Mini Hook for scraper tool .
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
BOM: Printed with ROSA3D High Speed PLA Signal Violet A tough, reinforced ice scraper designed specifically for car windshields . The geometry focuses on durability, comfortable handling, and reliable performance in freezing conditions.…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
Sealant Scraper Tool - Thumb or Finger Replacement Part :) Keep your thumb or fingers free from sticky sealant when you finish it after application. The corners are identical for each provided tool in the range of 9 to 25 mm in diameter…
Print approx. €3.21–€3.93 excl. taxPreliminary estimate for PETGSource material: PET
A Mini Scraper version 2 with an embedded 6x3 mm magnet. If you use the provide Gcode for a Core ONE it will stop at the layer needed to insert the magnet. If you aren't using that you can easily add a pause in PrusaSlicer. I used a 30%…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
Based on the idea of Makers Mashup. I redraw this from scratch to make it double eneded with a built in scrapper. Works fine with PETG but might be better to use PLA for the scrapper as PLA is harder. 1 inch felt pads bent in half. The…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
Features Two different length for wider and narrower glide surfaces. No tapered eges for better durability. While scraping one will tilt the scraper anyways. Two rounded corners with different radii to scrape grooves in cross-country…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
remove ice without removing gloves, ergonomic design for a comfortable grip and double face to scrape or break ice from car windscreen and more
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
Dive into the world of de-icing with this unique windshield scraper! Inspired by the robustness of a backhoe shovel, this scraper is designed to tackle the toughest winter conditions. Its ingenious design offers an extended de-icing…
Print approx. €7.01–€8.56 excl. taxPreliminary estimate for one variant
This two sided tool is used by my artist wife to create textures and scrape on her canvas. I put one in my tool kit to occasionally use as a probe or scraper in tight spaces. It is printed in PETG with organic supports.
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
I added the “normal” hexagons to my scraper and thought, “why shouldn't i make partial hexagons for the borders aswell?” So here they are. The 1/3rd hexagons are for the small corners on top of the scraper. The flat half ones are for the…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
I recommend printing on 0.2mm QUALITY with PLA. Don't forget about constrains!
Print approx. €2.32–€2.84 excl. taxPreliminary estimate for PETGSource material: PET
Print using filament or resin. For FDM, use a 0.25 mm nozzle with a layer height of 0.05 mm. Then glue the two parts together, followed by the legs. UPDATE 11/18/2025: I modified the de-icer legs to simplify gluing. Instead of gluing four…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
One blank version and one with a snowflake. Use your slicers build-in functions to add your personal touch with it! The pre-sliced has 25% infill
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
This handle for a handmetalscraper follows the basic design of Clough42's design idea from 2018. It allows additional accessoires like a big endknob etc. via a M6 thread. The clamping mechanism of the steel-shaft (20x 5 mm, overall length…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for PETGSource material: PET
Dies ist ein einfacher Fugenkratzer, den wir auf unserem Balkon benutzen. Der Griff ist angeschraubt, so dass man den Kratzer bei Abnutzung austauschen kann. Zusätzlich werden benötigt: 2 x Zylinderkopfschraube M4 x 18 mm 2 x…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET
There's a lot of scrapers on printables.com - but this is my version. As always, there's a balance between higher heat (promoting better layer adhesion) and lower heat (reduced stringing, especially with PETG). For me, scrapers should…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
Hier ein Satz Druckbett Schaber in 3 verschiedenen Größen. Ich habe diese in PETG gedruckt. Viel Spaß beim Drucken. Wenn Euch das Modell gefällt würde ich mich über ein like freuen. Here's a set of print bed scrapers in 3 different sizes.…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for PETGSource material: PET
Info: MK4 z-top-right-R2.stl customized to hold 4 or 5 nozzles and also scraper or any other tool optionally Print info: just like original, use PETG, 0.2mm layers, no supports
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
i wanted a more detailed and good looking bedscraper with rounded edges and better stability so it feels also better in your hand!!! its also on makerworld if your interested supporting it there too!!…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for PETGSource material: PET
Introducing the Game Changer in Winter Car Maintenance! Say Goodbye to Manual Scraping with our Electric Ice Scraper. Are you tired of waking up early to battle the frosty windshields? Have you struggled with traditional ice scrapers that…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
Printbed Scraper that uses a 85x54mm plastic card. The plastic card can be replaced without tools and both sides can be used. The advantage is that the plastic card is harder then printed structures but soft enough to make sure there is…
Print approx. €2.33–€2.84 excl. taxPreliminary estimate for one variant
It's a mashup inspired by Low Poly Buddy and Frog Hex Scraper. I think most of us agree hex scraper is probably a bit better than default printables scraper, but wanted something very on-brand Prusa. I like the way this grips better than…
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
Hexagon icescraper by sub3d
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for PETGSource material: PET
I use the "Nitoms Tape Peeling Cutter White T0860" to peel off the 3D printer print from the heat bed steel sheet. 3Dプリンターで印刷したものをヒートベッドスチールシートから剥がす際に、私は「ニトムズ テープはがしカッター ホワイト T0860」を使っています。 https://www.amazon.co.jp/dp/B07QF883Z9 I took a…
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
This little double ended scraper helps you extract every last delicious morsel of goodness from those annoying Marmite jars. I printed it with 100% fill but I don’t think that is necessary.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Object: Quite expensive car broom scraper bought on CircleK. Model: Schou 6866RS - telescopic scraper with rotating broom. Part: Lever for telescope. Description: The most expensive carscrapper from Circle K, looks great, works nice - to…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Printed at Bambulab A1 mini with black BambuPLA. I made a scraper V2 with unnormal shape for quality, efective and economical print. For better strong if you dowlownd stl. version set the Vertical shells Perimeters for 4 and infill for…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
This is a holder for the Hex Scraper: https://www.printables.com/model/122894-hexscraper-printbed-scraper It goes on the back of the printer frame just above the electronics box, using two holes already in the frame. It's secured with two…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
With this tool, de-icing windows becomes a real adventure. Thanks to the handle, the "Rotating Scraper" can be held easily and stably, and the blades can be rotated with the other hand. This means de-icing in the early morning is finally…
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant
This project is a custom designed stand created in collaboration with PCBWay , specifically made for the MScraper , the high quality precision scraper tool they offer on PCBWay+ Store The MScraper features a Damascus steel blade ,…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
Meet the Sled Ice Scraper – your winter companion for effortlessly conquering frosty challenges. Its sleek design and ice-busting prowess make winter woes a thing of the past. Embrace the frost with style and efficiency! ❄🚗…
Print approx. €3.84–€4.69 excl. taxPreliminary estimate for one variant
The ICE-X Astro Ice Scraper - scientifically engineered for any atmospheric conditions, generated by human creativity and powered by AI assistance. Conquer the cold with the push of a button!
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant
I made a scraper to help with prints
Print approx. €2.41–€2.95 excl. taxPreliminary estimate for one variant
Multi-Purpose Bed Scraper Ergonomic • Easy to Print • Durable The Multi-Purpose Bed Scraper is a practical and ergonomic tool designed for everyday use around your 3D printer. The handle is shaped for a comfortable and secure grip,…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for PETGSource material: PET
my model is the first one I have ever made would you mind liking and sharing it to any friends who have a 3d printer
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
BORING Scraper - Set For your bed scraping needs and more. We designed them for removing stickers and stuff from your buildplate, while being exceptionally easy to print. Design Cheap but competitive. Our design goal was to print these…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
I could not find a scraper sporting a hex pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…
Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)
UPDATE 3.1.2023: added V2 version with different inner shaping → same external size & characteristics, quicker print Info: 🟠 round edge → longer edge → scraper lasts longer then other spatula types scrapers if it is less sharp on one…
About the Scrapers: With a length of 86 mm and a thickness of 5 mm, the scrapers are very compact. The grooves on the side of the handle provide a firm grip. The angle of the front wedge is 26.6° and is therefore quite robust. Of course…
Dieser Bed Scraper ist das ideale Werkzeug für alle, die ihre 3D-Drucke sauber von der Platte bekommen wollen. Es wurde speziell entwickelt, um das Druckbett vorsichtig zu reinigen und fertige Drucke sicher zu entfernen, ohne die…
News 2024-04-04: Upon request, I designed an XL version of this scraper with 30% longer blades: News 2024-03-10: Please also check out my new Blade Dispenser for this Bed Scraper: Optimized Bed scraper with replaceable blades Since the…
This innovative tool simplifies print removal with its user-friendly design and unique features. The random pattern design ensures fast print times. No supports are needed, as the model will print fine without them. Durable and reliable…
CIUNCARELLO boats a distinctive design and features that sets it apart from conventional bed scrapers, making it the ULTIMATE Accessory for your 3D Printing needs. 8x6mm Magnets are strategically placed at both the front and back ends…
This is a useful Blade Dispenser for my new Optimized Bed ScraperXL with replaceable blades. The dispenser holds 44 blades and has a hook to which the bed scraper can be attached. Double-sided adhesive tape can be used to attach the…
Note added Oct. 5, 2021 : As some people have had problems printing this without infill, I have added files for 15% rectilinear infill. This scraper can be safely used on the build plate with little danger of scratching or gouging the…
PLEASE READ THE PRINT INSTRUCTIONS! TRIM IT AND DON‘T GIVE BAD RATING JUST BECAUSE YOU CAN‘T READ INSTRUCTIONS! After printing i cut the front of the shaper to make the tip a little bit more stiff and when cutting it angled it will be…
A quick but sturdy print bed scraper that's intentionally long with open infill so that you can also use it to swipe at the purge material. It will catch in the infill and drag away cleanly. To fit the Prusa Mini use the 3mf and scale to…
Description Tired of struggling to remove prints from your 3D printer bed? This ergonomic and durable bed scraper is designed to safely and efficiently lift prints without damaging your print surface. Whether you're using PEI, glass, or…
ULIMATE Print Bed Scraper/Windshield scraper wide and narrow versions! print at 0.16mm layers or less for best edge. Don't forget to- like share print and follow!
BOM: Printed with ROSA3D Starter PLA Black Ditch the dangerous metal spatulas! This 3D printable plastic scraper is the perfect tool for safely popping stubborn prints off your build plate without risking deep scratches on your PEI,…
🔥 UPDATE: V2 NOW AVAILABLE! An improved version (V2) featuring new side-grip grooves for better control is now out! 👉 Get the new V2 version here: This is a bed scraper / print removal tool designed to safely and efficiently remove prints…
Skyscraper modeled onscreen on YouTube. I used PLA, 0,10 mm layer height and 0.4 mm nozzle. You dont have to use any supports and 5 % infill is fine. In this configuration, it will take roughly 17 hours to print.
Anyone who has a Bambu has a love/hate relationship with the Scraper tool. It's awesome. But it sucks because they give you a magnet for it that has to be the weakest magnet known to man. Plus is a aluminum printer… so? Anyway, the…
I really like the Prusa spatula for its aesthetics and low filament consumption, but it could still be better. Enter the Prusa printbed scraper 2.0. I've reduced the material even more by cutting out triangular sections in the handle and…
The Micro SD Ejector is great, but I kept losing it because it's small. I Used Tinkercad (because I'm a simpleton) to add the ejector to the scraper. Printed at .12mm and 3 walls, takes 18 minutes and uses 3.79g of filament.
I was about to make the beloved hex scraper (since the one that came preloaded on my X1C was kinda garbage) but I thought to myself why should I print a nice scraper if I'll have to print a full one again every time the blade goes bad.…
Simple printbed scraper with Flashforge logo. Must have tool to remove stubborn prints and/or purge lines from the printbed. Layer height:0.12 Shells/walls: 3 Infill: 15%
Ice Scraper for Car – Durable Winter Tool This sturdy ice scraper is designed to clear frozen car windows quickly and efficiently. Its ergonomic handle with a reinforced grid structure ensures strength while saving material. The wide…
This is a low-profile bed scraper designed for safely removing 3D prints from build plates. The ergonomic handle provides a comfortable grip while allowing precise control during print removal. The scraper features a wide, thin blade that…
A useful tool for removing prints from the bed with interchangeable 3D printable blades for when one eventually wears out. You can print the body in either PLA or PETG, however for the blade PLA is highly reccomended. To install the…
Prusa bed scraper inspired by the iconic Prusament spool design. Perfect for safely removing filament residue and prints from the build plate Check out these cool things too!
This bed scraper is perfect for removing small blobs, filament strings, and leftover adhesive. 🔧 Practical & Efficient Available in 3 different sizes to suit any printer setup Lightweight and easy to handle Helps keep the build surface…
Ready for multimaterial or you can print only scraper_main.stl without words 3mf file for multimaterial included
