Smaller SFP Tray
A safe way to store a handful of unused SFPs (up to 16) so they're not sitting unprotected on the desk or banging around in a drawer.
- Downloads
- 85
- Likes
- 6
- Rating
- 0
133 models
A safe way to store a handful of unused SFPs (up to 16) so they're not sitting unprotected on the desk or banging around in a drawer.
A keystone jack to hide the hole in your patch panel if you're passing a SFP+ module (or other cable) through one of the keystone slots. The center hole is 4.75mm in diameter, but there are .f3d and .step files available if you have a…
Needs to be printed with a raft and without supports ! I used Greentec PRO and printed batches for 40 on a Voron V0, 90 Degrees Celsius Bed, 235 material. Likely works with PETG/PLA as well
This is a cooler that mounts on top of the UCG-Fiber to cool the SFP+ port. Specifically made for the WAS-110 and X-ONU-SFPP modules. You can find pre-soldered DIY fan + power module kits here: https://exen.sh/products/diy-kit-ucgf-cooler
Simple SFP beer case multiple varient available : SFP : 5x5 10x10 XFP/QSFP: 5x5 10x10 Copper SFP (more tick on top) : 5x5 10x10 QSFP DD (due to heatsink) : 5x5 10x50 more varient could be added as request. This project is freely inspired…
Simple and quick print. Easy to remove! Check out all other port covers USB-A port cover - https://www.printables.com/model/404578-usb-a-dust-cover-plug USB-C port cover - https://www.printables.com/model/303039-usb-c-dust-coverplugcap…
Print as oriented, supports not required. Any material.
No supports needed. Use magnets with 5mm diameter and 3mm height.
This is a bracket to mount a network media converter to the rail in a network cabinet/rack. As it is just fixed on one side, it fits 19" and 10" racks equally well. There are two holes for the cable inlet on the back to allow the…
I made this to more easily lift the lever on SFPs inserted into densely packed ports. Happy making! For what it's worth I printed mine in ASA and those little fingers are plenty strong.
boite rangement sfp fermeture avec 4 aimants ronds 3mm x 6mm à coller support pour rangement de 8 boites à la verticale
This is a very simple rack mount for Ubiquiti EdgeRouter X SFP as well as its power brick. I did not want to deal with too much tolerances so I designed it around cable ties, which is functional but a bit crude. You will also need two M5…
A dust cap for LC duplex SFPs. A simplex version (for BiDi SFPs) was exported too, this is just the same model without an extrude on the Rx connector. F3D file included for adjusting tolerances as needed. My measurements were optimized on…
Simple 12 slot SFP holder. I had a bunch of SFP's just laying around and wanted an easy way to store them a little more organized.
This Gridfinity-Compatible Organizer allows you to store up to 8 SFP/SFP+ Fiberoptic Transceivers.
I am using a couple SFP+ RJ45 adapters that get quite hot. This is a mount to cool them with a 40mm fan, i used a Noctua NF-A4x10 that's USB powered. The fan screws right in with the included screws.
I was was frustrated trying to use other designs as they had nothing to grab to pull out, and they also overlapped into ports next to them on my Brocade ICX 6610 48P. So I threw these together. They fit great and work wonderfully. PLA has…
To protect the SFP ports of my network switch I created this plugs. One simple version which is easier to print and sits flush against the switch. I prefer this one. And a version with a pin for easier removal. But because of the print…
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
This is a plug/dust cap for QSFP+, QSFP28, QSFP56, QSFP-DD, QSFP112, and QSFP-DD112 ports. TPU is recommended for the best fit.
Are you looking for a better way of storing all those SFP modules you have in a bag, or rattling around in your rack drawer? Print this box to neatly house them, or protect them while transporting them to your remote sites. Based on the…
Introduction I like to keep everything in my gun safe tidy and make use of the otherwise unused wall space. Since the safe is lined with fabric, I designed a series of magnetic holders for magazines, firearms and accessories. Strong…
This is a remix of the bollio's original model on thingiverse . I have added some cutouts to improve airflow. The original auther stated that this baffle was for the Mellanox ConnectX-3 CX312A. But I have a CX322A, and it works just fine.…
A remixed keychain of Olympiakos Piraeus (OSFP) Greek Sports Team
A safe way to store cleanly many SFPs. Sometimes you want to have them take up less space then the massive amount of plastic they're shipped in.
If you work in tech, you probably know what an SFP is. And if your job is like mine, you end up with over a hundred of these little buggers sitting in a plastic bin. And you can never find the right one when you need it, either! My…
This Gridfinity-Compatible Organizer allows you to store up to 12 QSFP+/QSFP28 Fiberoptic Transceivers.
Needed a solution for storing my growing collection of SFP modules, so I came up with this. Printed from Prusament PLA Galaxy Black on a stock Prusa i3 MK3S
Remix of EXEN's design that's been adapted to accept a 40mm fan instead of the 25mm used on the original
4020 fan housing for cooling XGSPON ONU Stick SFP+ (8311 WAS-110) rack mountable for UDM Pro/SE/MAX XGSPON ONU Stick SFP+ Link1 , Link2 Fan model: 4020 Requires support: Tree Slim What you see in the image was printed with Creality…
Box for SFP plugs Print settings: 0.2mm layer height Arachne wall generator for the seal to print properly Use variable layer height to smooth the top of the hinge I had better results with the bridged latch bottom when I turned it…
Have create this mount to hold the Edge router X SFP with psu in the back to mount in a 10 inch rack. there is a clamp with that needs 2 screws in 3x10mm to mount the edgerouter X SFP securely so it doesn't move around when plugging and…
Box for 3 SFP modules.
Easily lift the lever on SFPs inserted into densely packed ports. Now with a new and improved design optimized for 3D Printing Post your makes below and please throw a like on the model!
Sharing a simple custom-designed SFP+ DAC Connector Cover for all the fellow network/home-lab-savvy forumers here. This cover is perfect for lazy individuals (like me) who do not want to unplug their cables but keep them protected and…
Intro Designed to be printed face down. Holes included for airflow. Sturdy connections to card and case provided to ensure minimal risk of breaking during installation. No modifications to case required. Print Settings 0.6mm 10% infill No…
I made this remix to add 2.5g switch to rack together with my old TPlink switch. the switch model i have: https://www.aliexpress.com/item/1005005943823096.html left side is printed from original model here:…
Simple bin to hold my spare SFP modules.
I made a little bracket to properly mount a dual SFP NIC inside my Lenovo Thinkcentre M720Q. Small slots for the LEDs are included. The model has holes for M3-inserts. It is printed with the outside facing side downwards.
SFP Holder for Gridfinity. I included the freecad files if you want to edit them.
This part just covers a SFP port found in high end networking equipment. These help protect these and often these sensitive connectors. Designed especially for applications where ports are right next to each other, so these plugs are…
Targeted SFP/Transceiver Cooling Mount (Remix) Objective High-performance SFP modules—specifically RJ45 10GbE transceivers—generate significant heat that can lead to thermal throttling or premature hardware failure. This mount is designed…
V3 Update: Turns out that loading it with SFPs makes it significantly heavier, and it really doesn't like being dropped. Following field trials at work, I have included two “bumper” pieces intended to be printed in TPU, the glued on using…
This thing is organizer for standard SFP and SFP+ transceivers. I am storing them in my drawer and it was making horrible noise when I was opening and closing it plus there was high chance of damaging those transceivers. This way all of…
Because apparently dust is the enemy of progress: a supremely mediocre dust cover for your lonely SFP ports. Print it "port" side down, preferably in TPU but PETG might work. Will it look professional? Absolutely not. Will it keep…
Switch Dimensions Exterior 197.1 x 73 x 29 mm ( 7.76 X 2.87 x 1.14 inch ) distance between mounting holes: 129.5 mm ( 5.1 inch ) measured 43.5 mm from front measured 29.5 mm from rear Created YS25-0802 parameter set in my fork:…
Printed with ERYONE PLA 180°C With support PRUSA i3 MKS+
10-inch 1U rack mount version for YuanLey YS25-0801 ethernet switch. Printed the ears with long edge on build plate. Source: yuanley_YS25-0801
Inspired by NWalen's case this case is designed to protect the Ubiquiti SFP Wizard from daily knocks/transport. Shaped to match the slight narrowing of the SFP Wizard at the top and bottom. Recess provided for the power switch, which…
Wanted to incorporate another model in my setup. This time instead of modifying or modeling the rack mount shelf, an existing OpenSCAD library suitable to the purpose was used. Found https://github.com/wildegnux/universal-rack-shelf in…
Dell Mellanox ConnectX-3 10Gb SFP+ Dual Port CX322A low profile bracket for Lenovo ThinkStation P330 TINY Desktop PC. I printed quite a few available models and was having different problems with them. So, I ended up just creating one…
Tested on : TP-LINK MC111CS WDM, MC210CS It snugly fits my converter which is 72 mm wide, 95 mm deep and 27 mm high. No supports needed if your printer has no problem with bridging. SCALE UP 2-3% to fit without efort. :)
Wall mountable stackable trays for SFP modules
I got tired of trying to squeeze my fingers into tight racks with cable management trays to pull out SFPs, so I designed this puller to be able to reach in and grab the latch and pull the optic out. I also designed a thin flat on the…
Needs some finishing with a file - it fits tightly, I hammered it in by hand. You can't just get the switch out later. The landing hole is 160mm x 32.3mm. The hole is d=10mm for the power cable. Printed in PETG (infill 20-100% - there is…
DIN Rail mount case for Ubiquity EdgeRouter SFP
Protectic Cap for Mikro Tik SFP+ Ports Printed in Flex (TPU) might also work in PLA, but not tested Printsettings: Prusa Mini 0,6 mm nozzle Profile: Detail 0,2 mm layer height Filament: TPU (Saint Smart Profile)
SFP module. Use vase mode printing.
My HPE Ethernet 10Gb 2-port 560SFP+ Adapter came with a small backplate and I needed a tall one, so I modelled one in 3D. Note: I printed this model and I am using it, but I did not put a lot in effort in refining and optimizing the…
I took Jet0JLH's great design and modded it to keep 6 SFPs safe.
Full height PCIe bracket for Inspur YZCA-00431-102 network card Heavily modified remix of this model
Printed in TPU with 30% infill and an slim tree supports on build plate only (see images).
Remix of the model by Exen to have less air gap for the smaller heatsink and make it compatible with PDC004 USB C board
A 1U bracket to mount a Sodola 8x2.5G + 1x10G SFP Switch in a 10-inch rack I designed and printed the Skeleten , a 10-inch rack to house my homelab. I wanted it to contain everything I needed, except maybe a NAS. From top to bottom: 2U -…
I had a couple of HP Z2 Mini G9 workstations that came with a A2000 GPU but needed to have SFP+ ports available. Even though HP advertises that the chassis is “standard low profile bracket compatible”, this turns out to be a blatant lie.…
Little range box for 2 optical module transceiver sfp Print instructions Category: Computer Summary Little range box for 2 optical module transceiver sfp Print Settings Printer Brand: DAGOMA Printer: Discoeasy 200 </div> Rafts: Doesn't…
Half Height, low profile PCI bracket for HP NC523SFP 10Gb 2-port network adapter Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.20 Infill: 10% Filament: 3D Solutech PLA Silver Metal Notes:…
The insertion part is cone-shaped, so it will always fit
A bracket for the Lenovo Tiny computers that is made to fit on the Dell CX4121C Mellanox ConnectX-4 SFP Card. The bracket was printed with the internal part facing down so that the hexagon holes would look a bit cleaner once the supports…
Used to physically prevent the insertion of an SFP module into a SFP slot. The blocker fits all the way in. The thing does not lock and can be remove somewhat easily. Mostly used to prevent people from plugin in an SFP in a combo port…
I use a lot different SFPs daily. Being able to grab a few and go makes my job easier. This model allows me to organize SFPs to make them easier to find and allows me to quickly grab a few without having to open any packaging. SFP Mag…
The SFP transceiver holder is a good print to choose if you want to keep your transceivers safe from dust and dirt, the SFP holder can also be printed in numbers to organize your multiple SFP transceivers
Support to be able to hang Ubiquiti EdgeRouter X SFP stand. Print height 0.2 also it is recommended to add custom print supports for the hooks behind.
Print as orientated without supports.
Full height brackets for HP NC523SFP 10GbE nic recommend using a resin printer, but i have added a flat sided bracket if you want to print it sideways on a FDM Category: Computer
Vifly 2 holder for ERA drone, mouted to the back part of frame. Printed in TPU 95A.
A simple and tiny enclosure for a [mini SFP to 1Gbps RJ-45 media converter from AliExpress (SFP only PCBA variant)](https://www.aliexpress.com/item/1005003671214339.html). Print upright: * Tube enclosure - print in model orientation *…
Dimensions: 20cm diameter 4cm tall (~2cm white, ~2cm red) Filament change @ layer 11 (0.20mm layer height) Print settings: anything you like, white and red filament only!! Few words about Olympiacos emblem: Olympiacos SFP (Olympiakos…
Quick little model to hold 12 SFP modules on IKEA Skadis pegboard
Made this holder to keep my OS image USBs and spare Sfp modules secure and to hand. Works well for fibre module, the rj45 modules need more space. I printed mine @ .25mm and on a Prusa Mini it took 7 hrs Came out well in PETG Print…
Designed for a 0.4 mm Nozzle Turn on "Extra Permimeters on Overhangs" (Prusa - Slicer) for the 1 mm Overhang!
I printed it with TPU 95a
Backshell for a passive SFP+ module cooling solution. The model has to be tolerating temperature up to 80 °C. After prototyping with PLA, I ordered the model with reinforced ASA. The SFP+ extension is from 10Gtek (…
Dust cover for LC female connenctor on for SFP modules This dust cover is for the for LC Connectors which are located on SFP/SFP+ modules. I made it with rectangle clip so it can hang on those SFP ports/modules and you won't loose them. I…
A simple holder for all your SFPs.
No support needed, just have it print on the faces. Will fit together. I have already added a 0.1mm space to the cover so it most likely will not need horizontal expansion to fit.
I have a rather niche situation where I want to use my recently-purchased Sophos XG 230 Rev 2 1U rack-mount firewall (with OPNSense installed) with my Comcast XB7 gateway in bridge mode, which has a 2.5 Gbps RJ45 network port on it. The…
I needed a 10" rack mount for my router. 👍 The router press fits straight into the print. I needed to remove front feet 💪 I suggest PETG, but i made one with PLA that held up fine until i printed one in PETG. No supports needed. I…
Prints horizontally for best strength. Should print alright with any filament. I recommend using no infill and at most 2 shells and 2 top/bottom layers. Print multiple at once such that the layer time is not too short. The design was made…
Bracket for Intel NIC X710-DA2 by Dell for the Lenovo M720q. The bracket has: Small slots for the LEDs are included. Holes for M3-inserts. Aditional holes for ventilation. Recess for USB cable. It is printed with the outside facing side…
Hinge broke in release mechanism in my SPF+ module. This fixes that Used M1.6x4. Note that the fix adds a lot of bulkiness to sides of the module. It might be not possible to place such fixed module in middle between other SFP+ modules in…
When swapping switches, use this cage to store the SFP+ in an ordered manner
I upgraded my network to 2.5G and the switch had a SFP+ 10G port. I have an Ethernet connection through the wall with 2 keystone wall plates. I made this insert to capture my 5mm SFP+ cable and pass that through after removing the 2…
Remixed this to make it fit a 19" Rack, adapted mount from @Mauker you can use the mounts side by side, ore use some of @Mauker's modular Parts 3x M5 screws 3x M5 hex nuts. Thx munkulus @Mauker
GPON SFP Module Cover Protect your GPON SFP modules with this custom-designed 3D printable cover. It provides a snug fit for standard GPON SFP transceivers, shielding them from dust, accidental contact, and physical damage. Ideal for…
Mellanox ConnectX-3 dual QSFP+ PCIe bracket for Lenovo ThinkCentre M910x and ThinkStation P320 Tiny. Use a bit of force to tap the screws.