1,893 models
See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code and this Gear Shift Fidget assembled stands on your own table…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Shifter knob mod. Using original screw to mount the adapter, long shaft and locking to prevent breaking and over-tighten. Long version could be sensitive against breaking above the threadline. Short version in use since a few years. Screw…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Assembly For assembly, you will need one ballpoint pen spring with outer diameter 4mm/0.16" and length 25mm-30mm/0.99" - 1.19". You can use one of this Small springs set or Ballpoint pen spring or Compression spring You can use one of…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Today I have a 5-speed training gearshift for you. It is great for practicing manual gearshifting in a car. It prints several parts, there are also files for multi-color printing. For proper functionality, you need to use a Print…
Print approx. €2.95–€3.61 excl. taxPreliminary estimate for one variant
I printed a skull found on thingiverse (https://www.thingiverse.com/thing:518109/files), and we got the idea to use it as a gear shifter knob for my car, as I had already woodturned a shifter a while back. The skull is scaled to 40% of…
Print approx. €5.35–€6.54 excl. taxPreliminary estimate for PETGSource material: PET
A clip to hold 5mm brake housing and 4mm shift housing together on your bike to keep things nice and tidy and rattle-free. Flat front design solves the problem where cables may pull away from each other ( see this design ). Also, its a…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
New Thrustmaster TH8S gear lever Variations: TH8Sss1 v1 - no screw needed, just fold and push TH8Sss1 v2 - push, use screw, put part 3 on and then part 2 No supports. Perimeter: 5 Material: PET-G Layer: 0.1mm TH8Sss3 - thread printing,…
Print approx. €2.98–€3.65 excl. taxPreliminary estimate for PETGSource material: PET
Shifter magnet add-on for your Logitech racing wheel. I tested this on a G27, but it should fit any of the newer Logitech wheels. Files: Logitech Shifter Magnets: Standard version that fits a thin M3 square nut with 1.8mm thickness.…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
This ring is a simple tool to encode or decode text using a simple shift cipher, also called Caesar cipher. See this Wikipedia article for details. It has an additional ring with the letter numbers. The middle ring can be freely rotated,…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
The Height Z Layer Shift Test is designed to verify that there are no layer shifts, ensuring stability and accuracy before attempting a model that utilizes the maximum Z height of the printer. Print settings Nozzle size 0.4 / 0.6 Layer…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
Phanteks Evolv Shift XT case modification to fit AIOs over *60mm tall. Made to fit the Phanteks Glacier One 240 30T AIO. But will work with other AIOs as well. The mod was designed to blend in with case. *Will fit up to 70mm tall…
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
Ratio-changing pulleys are a wonderful hack for bikes. For non-electronic drivetrains, they allow bending the rules normally requiring a stringent pairing of shifter, derailleur and cassette families. Also called travel agents or…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
Shifter for 2024 Tesla Model 3 cup holder. Made originally out of PLA and it melted in the hot sun… Then made out of PETG and it worked better. It's still not perfect, seems a little to easy to shift and the size of the shifter itself…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
A simple shift gate for Futaba RC transmitter T6L. This separates the three speeds of the Tamiya 1/14 tractor trucks (and also the high-lift models) allowing easier forward and reverse control in all three gears. Once you have set up your…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
The left shift key on my Lenovo Thinkpad X1 Carbon 6. Generation broke. I didn't find another source where you get only this key alone. So I desigend a replacement and know it works like a new one. It has some really fine details so it's…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
TOYOTA CUSTOM 4WD SHIFT LEVER (2.0) ……………………………….. ERGONOMIC Curved design hooks to the hand, easier to handle compared to the simple cylindrical shape. OEM INSCRIPTION Directions for shifting gears on top, just like the factory.…
Print approx. €5.15–€6.30 excl. taxPreliminary estimate for PETGSource material: PET
I designed this simple tool to protect the bikes we repair. We attach one piece on each handlebar side and secure them with a 200mm long, 20mm wide velcro strap. This lifts up the handlebar so the shifter, brake, GPS, bell, etc. is…
Print approx. €5.37–€6.56 excl. taxPreliminary estimate for PETGSource material: PET
my printer is probably over extrusing so there may bee some slack How to install : used cura hihi SETTINGS Filament : ABS or better, not PLA >:( Support : ON Infill : 100% !!!
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
Shifter: D=9mm l=40mm Rolle1-2: PETG Gummi: FilaFlex 40
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET
H Shifter for Aliexpress Shifter Aliexpress Shifter: https://pt.aliexpress.com/item/1005004830201101.html?spm=a2g0o.order_list.order_list_main.198.acfccaa41OHoAV&gatewayAdapt=glo2bra
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
This is a thin plastic washer that fits between the gripshift and handlebar grip on kids bikes. Dimensions taken from the original part (30 mm OD x 23 mm ID x 0.6 mm). Easily modified to other sizes in Slicer. Recommended to print in PETG…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
The stock bracket thing that holds the bottom of the back panel onto the case is needlessly bulky, which made it impossible to route all the cables for my build. To be fair to Phanteks, this case does predate HDMI 2.1, whose cables seem…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
Backstory Inspiration came from the creator @yunayuna0522 on TikTok who uses an adjustable wrench instead of a shifter rod in her purple Honda S660 build My version connects to the Thrustmaster TH8S for a similar look and feel. Printing…
Print approx. €6.13–€7.49 excl. taxPreliminary estimate for PETGSource material: PET
After a fall on my MTB I destroyed an internal part of my Sram X9 rear shifter. For fun, I decided to design a 3D printable version of the part and see if I could repair de mechanism. After a few iterations I had a working design that, to…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Po delší době ježdění se mi rozdrolila řadicí páka, a tak jsem se rozhodl vyrobit si vlastní. Pokud má někdo z vás stejný problém, můžete to také vyzkoušet. Otestováno na modelu Citroën Xsara 1998 Coupé. Tisknu to na Prusa MK4
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for PETGSource material: PET
My brother has a Triumph TR6 and the surround for the gearshift was cracked in a couple of places - he asked me to create a trim ring to hide the cracks and then thought that others might want something similar. It's just a ring - 118mm…
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
Tireshifter – Your Style. Your Grip. Your Shift. The Ultimate Modular Shifter Customize your racing setup with the perfect shifter for you! Tireshifter combines racing-inspired design with extensive customization options. Choose between…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for PETGSource material: PET
4b0 863 279 c wjd 80881
Print approx. €5.20–€6.35 excl. taxPreliminary estimate for PETGSource material: PET
LEATHER STITCHED SPORTS SHIFTER FOR THE THRUSTMASTER TH8S Easy to Print Almost No Supports Uses under 200g Of Filament Tested on the Thrustmaster TH8S Designed Without the help of AI Multicolor Printer Required Download the Bambu studio…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
I am posting only the gcode for this model, because the sizing was adjusted in Prusa Slicer to be a perfect fit, and because this model was sliced as a multicolor part using three toolheads, with assignment of colors in the slicer. It's…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
Two versions are included: Textured gears Smooth gears Fully print-in-place – no assembly required. Also available with keychain holes. Tip: When removing the plate from the print bed, flex it gently. Pulling too hard may damage the…
Update 25.8 Added a version separated into 3 parts to prevent the stick from breaking. V2 – with "R" gear and new design. Available with keychain holes. Fully print-in-place – no assembly required. Tip: When removing the plate from the…
The Gearshift Fidget is the perfect fidget for all car lovers! But it's also perfect for everyone else, because it's simply great fun to use. The aim is to move the gearshift lever through the various positions. It is designed so that you…
Announcement: The Stick Shift Fidget Toy V2 has been released! It's completely redesigned from the bottom up. We took all the complaints from the last version into consideration when designing this. Now, all the parts screw together…
The revisiting of an old project of mine, which I had published here on Thingiverse with my old profile Ive printed using a Bambulab X1C and printed with Sunlu Matte PLA.
Introducing the Shifted Cubes Plant Pot, where nature meets modern design. Featuring captivating geometrically shifted cubes designed to infuse your space with modern sophistication, this pot is a statement piece that effortlessly merges…
UPDATE: I've redesigned my own version of this from scratch, you can find it here: https://www.printables.com/model/800917-logitech-g-shifter-gated-manual-and-shift-knob I remixed the model by simply combining the 'base' and 'top' part…
Designed to be as simple as possible and perfectly functional. Easy to install and works wonderfully. I'm selling this model on my Etsy, the CC license is non-commerical for anyone else:…
Cable Clip for shift- and brake cable: 4mm diameter for shift cable 5mm diameter for brake line There are 2 version: shift cable to brake line shift cable to shift cable
Fits all Neptune 4 variants. This fan-mod targets to provide better cooling then stock while sticking loosly to the stock design language while integrating 2x 5015 Fans and 1x4015 Fan. There is a PDF with assembly instructions. It also…
Are you stuck idling when you'd rather be driving? This pocket-sized six-speed gear box fidget may help. Feel free to make vroom-vroom noises as you lace through the gears. The gear graphic on the back identifies you as a proper gearhead.…
Remix of the OEM cap generator. Credit goes to DesignersMind. If you have a 65% of 75% keyboard, then you'll know how difficult it is to find a cheap keycap set with 1.75u shift key. I've included their original file and a file that I've…
The Design After something different? Here we have the Vortex Shift! This is the most confusing and satisfying yet! Whilst i designed this some months ago i took some time to refine it and get it perfect. Import note: Whilst fully…
Use original screw to secure on shifter. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Anycubic PLA Grey Notes: Any material does the trick. Category: Gadgets
Some assembly required - Glue piece 1 on the bottom of the main body. USE ONLY A FEW DROPS ON THE PERIMETER, do not stick to the spring. Superglue/Cyanoacrylate works fine. Glue piece 2 onto piece 3 (There are a couple of divots to help…
DIY Racing Sim Sequential Shifter Thanks for your interest in my DIY 3D printable Racing Sim sequential shifter. The idea was to design it to be strong & long lasting, but also cost effective and without any special components required.…
“R” gear - available in both right-side and left-side versions For a smoother gear shifting experience, press the lever down while changing gears . Fully print-in-place – no assembly required No supports needed Tip: When removing the…
Added V.2 models. I find the new design more comfortable. It is a bit lighter beacause it only uses 2 magnets. And the design is better because it should not get loose with time. 3D printed modification that makes your Logitech G29 paddle…
Security Please follow the mounting instructions in PDF to replace plates and knobs Customize at your own risks ! Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability , add : 7…
I really liked jeoje's design for the Playseat Challenge, but I didn't have any M3 hardware that was long enough. I had some M6x40mm flat head screws leftover from another project, so I decided to use those instead. I started from scratch…
Update: Added a tolerance test based on feedback from makes. Please check fit with this part and adjust XY scale for desired fit before printing the whole part. Background I took the basic design from my M12x1.75mm shift knob and adapted…
Print what you want. No need for supports.
Check out our Discord for wiring diagrams and resources on how to build these DIY Sim Racing Steering Wheels! www.discord.gg/turnracing The .zip folder includes: -Designed for 3d printing -Magnetic Snap action lever -M4 x 8mm spaced…
DIY Paddle Shifter PERSONAL USE LICENSE ONLY Files are for personal use only, non-commercial and not for resale Copyright by KODAI Racing Features Large 15x5mm magnets Ball bearing movement Compact design Easy FDM printing A simple…
Thread: M12x1.25 Knurled, ergonomic shift knob made for manual Subaru Outback
This is a figit shifter which clicks when put in gear. Does not take muck material so it could be printed from end of the roll scraps. Happy printing and enjoy!!
When working though y-axis layer shift issues I designed this model to excite my particular failure mode (basically circular shapes seemed more likely cause my printer to fail). Probably won't be effective in all failure scenarios, 'but…
This model is inspired by this adapter: https://cults3d.com/en/3d-model/game/adaptador-secuencial-logitech-g29-g27-sequential-adapter-logitech-g29-g27. The model is good but I wanted it to be more tight fitting and to be able to use…
Inspired by the drippy bucket I wanted to challenge myself to designing a dripping ice cream cone. From this I wondered how it could be used practically and thus spawned the drippy shifter. This design is made up of multiple parts with…
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 7 perimeters to plates 5 perimeters to the knob 15% Infill For Knobs' better grip texture, we recommend you to use…
I wanted a shifter mod that looked good, stiffened up the shifter, and could also be transformed into a sequential shifter. I took a few of the other designs (links below) on thingiverse and molded it into this. I printed it but it needed…
Used the merged top and added hooks for rubber bands in order to have the option to convert it to sequential.
Tool to adjust gear lever of a VW Golf 2 Category: Automotive
UPDATE June 2021: PiCa135 lensboard 2.stl is replaced with a new version UPDATE Feb 2021: New thumb wheel: https://www.printables.com/model/168680-pica135-improved-thumb-wheel-film-advance-mechanis Replaces the parts…
This is a remixed version of the original thing posted here on Thingiverse, which is a shift boot bracket for the BMW E46 3 Series. It has better strength as with the added fillets and the clips are thickened as well as enlarged for…
WARNING THIS IS A REMIX
This is an extremely sturdy and flex-free SHH Shifter and/or Handbrake mount for the Playseat Challenge, based on the TH8A mount from floano: https://www.thingiverse.com/thing:3325124 Customized to hold the SHH Shifter and/or a handbrake…
gear/shift knob M10x1,25 / M12x1,25 size 42mmx42mmx138mm printed in petg
Place the game peg thru the hole at the bottom and snap together. Print the top face up with zig zag supports. No supports needed for the bottom.
I created this simple object to convert the Logitech G29 and G27 into a Rally Shifter. I wasn't happy of the actual design so I created mine. Caution: Only works with the original lether cover or you have to glue it ;) You just have to be…
Logitech Driving force H shifter Console to mount to Playseat Challenge. Ends up being a quite nice starting setup for a driving simulator rig. Use PETG with 35% Gyroid infill, and 2pcs M4x30 Screws with washers to mount. 2019.02.20: REV3…
this is a fidget star to play with to satisfy
Added a V2 which provides a much better fit on the shaft than my first version. I've also extended the lip as it tore off on the first version.
This 3d printer shifter works straight away However wait for it to be cooled down after printing to ensure you don't damage the spring
I found that when using the thrustmaster th8a shifter on cars with less than 7 gears, i would sometimes accidentally put it in a gear that didn't exist. These gear blocker/fillers eliminate that issue when you are driving a car with 4, 5…
Shifter gates: This keeps the same gate geometry and switch mounting as the original gates, but upgrades the thickness of the gate panel to feel more sturdy. The original shifter gates that came with the shifter were thin plastic. Shift…
My Toyota Tacoma shifter got scratched up and the leather peeled away. It looked ugly, but most importantly the 6-speed tree illustration was no longer visible for people who occasionally drive my truck and can't find reverse. I bought a…
Reinforced replacement for the shift pedal hinge for the Thrustmaster T300 racing wheel. It should be the same part for the T150. For a smooth operation print the hinge in 0.1 mm layer height. I additionally added a drop of grease. Should…
Paddle shifter extensions for B9 Audi's. i only know for sure what it fits on the A4/5 and S4/5, i think it works on the A3/S3 as well. i know it does not work on the RS5 as those are slightly taller. these hook over the top and snap in…
I printed “Status_Symbol_3d - Gearshift keychain”. Although it was a nice fidget, I wasn't satisfied with the action. So I decided to make my own version of a gear shifter fidget. I made it so there's a spring to return the shifter to the…
Doodled up a new shift knob for my 4th gen 4runner. Design cues from the Teton Workshop shift knobs with some added features. May also fit other Toyotas that have an M8x1.25mm threaded shifter rod. The depth of the hole is 2.5" so check…
Long gear knob design for Mazda MX-5 NB (fits not only NB). Also fits cars with dimensions: Thread diameter and pitch: M10x1.25
This is a fully printed canon RF body to EF lens Tilt adapter. It allows you to create the “tilt shift” effect with any EF lens. It will also work with any EF body to other lens adapters, I've personally used Nikon F mount, Olympus OM…
Pre-threaded (M12x1.5) shift knob with a VW pattern.
!!!UPDATE !!! Use the NEW STL's for the Shifter Base and Shifter Lever instead of the .step models 8x5mm magnets microswitches For a single Shifter: 4x M2x10, 2x M2 Nut 1x M3x30, 1x M3 Nut 2x M4xXX, 2x M4 Nut ----- mounting bolts, length…
I made this model to fix a broken transmission cable bushing on my 2012 GMC Sierra 2500 so that is the only vehicle I can confirm that it works on. I printed mine in PLA with 100% infill and it is working so far, not sure how long it will…
Here are two shift knob designs with most common thread pitches to choose from: M12 x 1,25 M12 x 1,5 M10 x 1,25 M10 x 1,5 Knob sizes: Knob1: lenght 80mm, diameter 40mm, thread depth 40mm Knob2: lenght 90mm, diameter 40mm, thread depth…
This is an OEM looking BMW E30 shifter/gear knob that fits into your E30 with ease. It has a peg in the middle so it doesn't rotate and a recess for the original BMW gear knob emblem, which is this part number 25111221611. I got this…
I merged the cupholder adapter from DutchWorkX3D with the shift cup sleeve from johnsmithbb168 for it to fit perfectly in my Tesla Model 3 without any other insert into the cupholder bay required. This will fit the unmodified shifter from…
A mighty owl-man adventurer with natural stealth and night-vision. Collect them all! Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print with Tree Supports on build plate…
H shifter with Magnets and Sequential hooks
An extension to the original Logitech shifter knob. It is about 100mm (10cm) tall. Outer diameter is 35mm. To install it you need to remove the original top by removing the decal on top of the knob and removing the M4 screw. Put in the…
Broke my gearshift cover. so i reconstructed it in CAD. Printed it with my Prusa Sl1 s.
>>>Newer Altered Version Available<<< I am using Sunlu PLA+ and had to reprint the slider multiple times after just a few days. I modified the slider for increased durability and smoother movement, and I remixed the top plate for added…
Replacement Knob for the shift of Peugeot Ranch/partner and Citroen Berlingo cars, fit quite snug, I used PLA, but consider heat resistant plastic in case the car gets very hot on the sun... I managed to fit in the original knob swatch…
I use the original jeoje's model but adding the plate for the handbrake, and the holes for the thrustmaster th8a. Assembly Instructions: This was designed to be assembled with 30mm M3 screws with 5.5mm nuts. Print Settings Rafts: No…
Clip used to attach the brake and shifter cables together for neatness. Very tight fit.
I really liked Forker45's shift knob and the fact that H3wro's uses the original logitech shift knob cap, so I combined them together to make this! The picture of my print in black were H3wro's original model (I also uploaded his file)…
