Leather Stitched Sports Shifter for Thrustmaster TH8S (Multicolor, 143g)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.61 – €0.75 net (excluding VAT)
For file: Adapter_0.4n_0.15mm_PLA_MK4S_42m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.68 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 42 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Leather Sports Stitched Shifter for Thrustmaster TH8S. AMS, MMU, or Toolchanger required. Easy to Print.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 51
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
LEATHER STITCHED SPORTS SHIFTER FOR THE THRUSTMASTER TH8S
Easy to Print
Almost No Supports
Uses under 200g Of Filament
Tested on the Thrustmaster TH8S
Designed Without the help of AI
Multicolor Printer Required
Download the Bambu studio or Prusaslicer .3MF to get the full Multicolor, just import it into any slicer you use and it should transfer over. Just use the STL if you want a single-color Print, or if you plan on painting it.
Make sure to Print the Adapter too.
This Model uses 143g of Filament with a MMU3 and 199g on a Bambu Lab AMS.
Print settings are already Included in the .3MF
For the Provided G-Code file for the Mk4s+MMU3:
Filament 1: Black, Filament 2: White, Filament 3: Red
Or any other combination you want to use.
Print Settings:
Supports: For Support enforcers Only, Place supports Here(Where the Blue area is:
Use a 0.4 Nozzle at 0.12 Layer Height, 0.08 if your Printed is tuned right, or a 0.2 Nozzle with a 0.08 Layer Height for more reliable and high quality Prints if you have a 0.2 Nozzle.
Use 4 Top Shell Layers, and 3 Bottom Shell Layers, use 5 Paint Penetration Layers, use 25% Infill, Grid or Gyroid.
Make sure to use a Big 2.5cm Brim. And if you use Matte Filaments, you can use 3 Paint Penetration Layers, and You can lower the Purge Volume.