Search results: silicone

Sort order

934 models

P
PrintablesFélix

Silicone caulk profiling kit

This tool set helps you get a perfect finish on your silicone caulking. You'll find the following: straight profiles for corners (5, 7, 8, 10, 12, 14, 16 mm) rounded profiles for taps, fittings, or recessed joints (5 and 15mm) a tool to…

Downloads
3,025
Likes
296
Rating
5
P
Printablescity17

Silicone remover

Scraper for removing old silicone. The front cutting angle is 30°, the rear one is 20°. Being made of plastic, the tip may bend, but you can still continue to use it by tilting it further. If you have ideas for a remix or to improve it,…

Downloads
854
Likes
87
Rating
5
P
PrintablesAlvomane

Prusa XL Front Nozzle Purge Wiper for Bambu Lab A1 (not mini!) Silicone Brush | Prusa XL Fronthalter für A1-Silikonbürsten

Update 19.10.2024: EN Notice: Since I remixed my Front Nozzle holder before the release of Krys own A1 version, it is compatible with Krys ‘A1 mini’ purge catch tray. So please combine my A1 remix with Krys PrusaXlFrontNozzlePurgeA1Mini…

Downloads
283
Likes
78
Rating
4.8
P
Printablesplabs.cz

Gridfinity bin for MK4S nozzle replacement tool (silicone sock/no silicone sock)

I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.

Downloads
123
Likes
22
Rating
5
P
PrintablesHolger

Cutting Tool for 16mm Silicone Damper (Anycubic Vyper)

A simple cutting jig for 16mm silicone damper which can be used for accurate bed leveling for your Anycubic Vyper. After cutting, the silicone dampers have a height of 11mm. -- deutsch: Eine einfache Schneidevorrichtung für 16mm…

Downloads
100
Likes
15
Rating
0
P
PrintablesJed LaRue

Silicone baking mat holder

Created this to hold rolled silicone baking mats.

Downloads
63
Likes
16
Rating
5
P
PrintablesJpell01

Creality Silicone Bed Spacer Adjustor for GEEETECH A10/A10M

This offset is used with Creality silicone spacers as Geeetech doesnt have the bed chain cover that an ender 3 has. This piece goes near the bed cables on the Geeetech Bed.

Downloads
44
Likes
1
Rating
0
P
Printablesmageb

Mold for Silicone Rubber Replacement Mats for Tefifon KC-1

The original mats of Tefifions were made of a material that unfortunately has not survived the decades well: With another project I have already published a way to print replacement mats, that are fine. Now with this project I provide a…

Downloads
20
Likes
2
Rating
0
P
Printablesmageb

Production of self-adhesive silicone parts (Example: Rubber discs for Tefifon Holiday/KC-4)

Update June 27th, 2022: In the meantime, I have also found another way of bonding silicone rubber without the chemical treatment trick described here. I have added the description of this alternative at the end of the article. Preface…

Downloads
19
Likes
15
Rating
0
P
Printablescrashkg

Viking Stovetop Silicone Feet

This is a mold for 7 Silicone feet that mount under the grates on a Viking Stove. They match the originals exactly. It is very easy to pour the silicone into the 2 part mold and make as many replacements as you want. Happy Printing. Video…

Downloads
11
Likes
2
Rating
0
P
PrintablesJC

Silicone Nozzle Brush (stick)

Silicone Nozzle Brush (stick) I wanted a way I could hand clean the nozzle when hot on my printer. This works great. I used a silicone finger cot that has a brush. I pull it up over this 3d printed board and now I can brush my hot printer…

Downloads
6
Likes
3
Rating
0
P
Printablesfifindr

Silicone / Caulk Cartridge Finishing Nozzle Tips

No brim or supports required. A set of finishing nozzle tips designed for silicone, caulk, sealants, adhesives, and similar cartridge-based materials. The nozzles screw directly onto standard cartridges and feature integrated finishing…

Downloads
7,888
Likes
2,557
Rating
4.87
P
PrintablesVC Design

Silicone Cartridge Cap

Designed to fit universally on silicone sealant cartridges with an S15 × 2.5 thread , it is a simple and reusable solution for storing partially used cartridges. Features Helps prevent silicone from curing between uses Universal fit for…

Downloads
6,523
Likes
1,681
Rating
4.97
P
PrintablesGero

Creality K1C Silicone Nozzle Cleaner Mod Easy Bed Plate Swap

NO software modification are required if you have a K1C Just print, glue up the original silicone brush and screw the bracket in place reusing the 2 carriage screws. Now you can use whatever plate you want. I have included a brush mold…

Downloads
6,373
Likes
1,132
Rating
4.92
P
Printablesfifindr

Caulk / Silicone Nozzle Cleaner

A compact tool designed to clean caulk and silicone cartridge nozzles after use. The spiral tip helps remove leftover material inside the nozzle, preventing silicone or sealant from hardening and allowing repeated reuse. Simple,…

Downloads
5,773
Likes
1,803
Rating
4.71
P
Printablesizzodesign74

stendi silicone

utile utensile per facilitare la stesura del silicone,si consiglia stampa in TPU

Downloads
5,426
Likes
2,000
Rating
4.89
P
PrintablesVC Design

Silicone Caulking Tool

This tool features interchangeable head pieces , allowing you to choose the finish that best suits your project. Two head styles: Chamfer – creates a clean, angled finish Round – produces a smooth, curved joint Each style comes in three…

Downloads
5,206
Likes
2,299
Rating
4.63
P
PrintablesWilko_SLO

Silicone Remover

In Prusaslicer set Vertical sheel perimeter to 5 to get more powerfull tool. Print orientation

Downloads
3,660
Likes
453
Rating
4.86
P
PrintablesKTP

Silicone cartridge cap

I printed mine in PLA, no support and in 0.20 mm

Downloads
3,226
Likes
422
Rating
4.95

(New Version!) Adjustable gantry mounted nozzle seal, parking and silicone nozzle brush / cleaner for Voron (2.4/Trident)

This is an adjustable gantry mounted nozzle parking spot and brush for Vorons (2.4 & Trident) using bambu lab's silicone wiper. New Version! Now made more modular and using high temperature silicone RTV to further improve nozzle heat…

Downloads
3,043
Likes
763
Rating
4.79
P
Printablesschreinerman

silicone tube/cartridge/cartouche cap/cover

The silicone tube/cartridge/cartouche cap helps silicone is not drying after usage See also the version with protector for cartridge and applicator: https://www.printables.com/model/1135314-protector-for-silicone-cartridgecartouche-applicat

Downloads
2,677
Likes
643
Rating
5
P
PrintablesKnochen911

Fugenglätter/ silicone trowel

Perfekt für Silikon Fugen glatt zu ziehen. Perfect for pulling silicone joints smooth.

Downloads
2,346
Likes
322
Rating
4.96
P
PrintablesPixi2012

Sealant Nozzle Cap - Silicone Cap - Silikon Tube Verschluss

Ich hasse es wenn die kurz benutze Silikon Kartusche beim nächsten Mal ausgetrocknet ist... Somit hier ein Verschluss. Damit es optimal dichtet einfach ein Gummiband vorab auf das Gewinde geben (muss aber nicht sein). Der Verschluss ist…

Downloads
2,317
Likes
161
Rating
4.97

Voron 2.4 nozzle brush using Bambu Lab's A1 silicone brush

Newer model here - gantry mounted version including nozzle stop to prevent leakage when parked: https://www.printables.com/model/882364-new-version-adjustable-gantry-mounted-nozzle-seal This is a remix of the great design by FunFunBoy…

Downloads
2,124
Likes
380
Rating
4.93
P
Printables3Daomm

Silicone finishing tool set

Silione finishing tool, set of 2. Get those perfect finish silicone corners. Simple tool set, easy print. print 0.2 layer 25% infill material: any [original are made in silicone], but i´ve been using petg and pla, and it works great - if…

Downloads
2,051
Likes
273
Rating
5
P
PrintablesPlatypus1987

Silicone Caulking Paste Spreader Tool

Tool for creating nice corners of silicone (e.g. in the bathroom). One object has a 3, 4, 5 and 6mm radius and the other a 7, 8, 9 and 10mm radius. Enough choice for every job!

Downloads
2,041
Likes
161
Rating
4.85
P
PrintablesS. Barsoumian

Creality K1C/K1/Max Silicone Nozzle Cleaner

Add flexibility to your nozzle cleaner,

Downloads
1,981
Likes
315
Rating
4.9
P
Printablesjinetix

Voron 2.4 Silicone Nozzle Scrubber w/ Sheet Stops (Beacon / Carto Compatible)

What started out as a remix has now been completely overhauled in CAD to require a bit less Y-overtravel and be a bit more robust. If you are here to reprint a specific part, or using parts from other remixes, it may not fit together…

Downloads
1,894
Likes
346
Rating
5

Ergonomic silicone or bed scraper

Ergonomic silicone scraper Sometimes I need to replace the silicone around the bathtub, so I used my experience in 3D modeling and created this silicone scraper. The scraper can also be used on the printing plate as a bed scraper !! The…

Downloads
1,802
Likes
701
Rating
4.8
P
PrintablesVladimir Mincev

Silicone / Acrylic / Caulk Smoothing Tools

Useful tools for smoothing sealing lines and caulking lines, which helps save sealant without masking tape when you apply it for sealing work. They are suitable for most types of sealant such as DIY crafts or floor silicone sealant,…

Downloads
1,735
Likes
432
Rating
5
P
PrintablesPrint@Hive

Silicone Edge Scraper

Il SiliconeEdge Scraper è il raschietto pratico e resistente, progettato per rimuovere facilmente il silicone in eccesso da spigoli e angoli. Grazie alla sua punta a V di precisione , elimina il sigillante senza danneggiare le superfici,…

Downloads
1,586
Likes
831
Rating
4.75
P
Printablesfifindr

Silicone / Caulk Cartridge Nozzle Tips

No brim or supports required. Threaded nozzle tips designed for silicone, caulk, sealant, adhesive, and similar standard cartridges. The set includes multiple nozzle variants: Flat tip 45° angled tip The threaded base allows the tips to…

Downloads
1,556
Likes
637
Rating
5
P
PrintablesLordOgreCorsair

Adjustable Mold Housing for Silicone Molds Making

They can be assembled with binder clips to form different sizes of rectangle and different sizes of squares by different combinations for different size molds. Can be stacked to make taller mold.

Downloads
1,467
Likes
214
Rating
5
P
PrintablesBig B

Silicone/Glue/Acrylic cartridge cap

Printed with PLA. 0.2 layers. 3-4 walls. 30-99% infill. No supports. Top/Bottom pattern: Concentric Prints in 10-15 minutes.

Downloads
1,324
Likes
330
Rating
5
P
PrintablesTony GRILO

Caulking Gun Nozzle Unblocker - totally without support / Nettoyeur canule cartouche silicone

Caulking Gun Nozzle Unblocker / Nettoyeur canule cartouche silicone

Downloads
1,322
Likes
245
Rating
5
P
Printablesfifindr

Silicone Tube / Cartridge Cap

This Silicone Tube/Cartridge Cap was born out of necessity when my brother asked for something to keep their silicone and sealant tubes from drying out during their construction project. The cap features rounded edges for a better grip…

Downloads
1,310
Likes
389
Rating
5
P
PrintablesMike

Nozzle tip for silicone dispensing tube

Simple replacement/disposable nozzle for silicone sealer tubes

Downloads
1,248
Likes
132
Rating
4.93
P
PrintablesLK74

Regular size silicone caulking nozzle

Regular size caulking nozzle (10cm) Remixed from an original design by Lannix 3D https://www.printables.com/model/150759-extended-caulking-nozzle

Downloads
1,213
Likes
166
Rating
5
P
PrintablesTonyB

Silicone Tube Leveling Jig for Sovol SV06 Heatbed

This is a modified version of motocoder's jig to suit the Sovol SV06, the length of cut silicon tube has been extended to 12mm from the 9mm of original jig to better match the Sovol SV06. Information about the original mod can be found…

Downloads
1,211
Likes
110
Rating
4.96
P
Printables100prznt

Cap for Silicone Cartridge

Cap for silicone cartridges or simlar, with S15x2.5 thread.

Downloads
1,193
Likes
150
Rating
4.85
P
PrintablesFrank 3D

Cap for Caulk, Silicone or Glue Cartridge (Custom Buttress Thread)

I looked into the type of thread that was used for these types of tubes. Everything pointed to a S15x2.5 specification; which is a type of metric buttress thread profile. Seems to fit everything with the same tolerancing that store bought…

Downloads
1,073
Likes
156
Rating
5
P
PrintablesZbyněk Ch.

Prusa MINI Silicone Bed Leveling Mod - bed tightening jig

Supplement tool for this: https://forum.prusaprinters.org/forum/user-mods-octoprint-enclosures-nozzles/prusa-mini-silicone-bed-leveling-mod/ When levelling hotbed in this mod, you are asked to tighten screws 426°, -32°, 168° or any other…

Downloads
995
Likes
109
Rating
4.91
P
Printablescelly

Silicone Cap

Summary Silicone/Putty cap for keeping the putty usable for longer period of time. Tolerances are tunned for my Prusa Mini. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament brand: Sunlu Filament color: Silver…

Downloads
951
Likes
83
Rating
5
P
PrintablesFreshPrints

Anycubic Silicone Mod & Bed Spacer Mod , Parametric Shims and Spacers for Kobra 2 Max , Pro , Neo , Plus

Dial your bed In. Parametric Shims work with your Stock Hard Spacers and Silicone spacers found on AliExpress or Amazon Premade Shims for Stock Factory Spacer and Silicone Spacer if you don't want or need to adjust the size. No worries…

Downloads
916
Likes
158
Rating
5
P
Printablescelly

Silicone Cap with nozzle storage

Summary Silicone/Putty cap that I am using to store nozzle and keep the putty usable for longer period of time. Tolerances are tunned for my Prusa Mini. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament brand:…

Downloads
861
Likes
98
Rating
4.91
P
PrintablesReferentiel

Silicone sealant straightener

4 Corner : 90° - 16 mm - 10 mm - Radius 16 mm

Downloads
858
Likes
81
Rating
4.71
P
PrintablesYouCanCallMeAl

Silicone caulking nozzle, ribbed for your pleasure

Silicone caulking nozzle, ribbed for your pleasure, makes (un)screwing fun!

Downloads
854
Likes
90
Rating
5
P
Printables3DPrintDemon

SOVOL SV08 Silicone Nozzle Cleaner & Purge Bucket Minus Load Cell brass brush option

…Please be sure to hit like & post a make, I'd love to see your prints! MACROS AVAILABLE HERE…! https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/ EDIT: ADDED SILICONE MOUDLE for use with silicone pads, including the one…

Downloads
850
Likes
187
Rating
5
P
PrintablesWerner xxx

tube caps (oil can, silicone tube (310ml cartridge), ...

OpenSCAD model to simply create a cap with a few measurements. 2025-12-24 update: I've added a replacement nozzle that can be screwed to the tube and a screwable cap to just close the tube without the nozzle. Of course you can buy…

Downloads
839
Likes
392
Rating
5
P
PrintablesThomas Levendig

Silicone Sock Mold, for Prusa Mini

This mould is created to make silicone socks for the Prusa Mini. Silicone Sock V2, Prusa Mini is optimised as much as possible. Instead of the standard approach using long m3 screws, the mould is closed with a simple clamp or vise. What…

Downloads
836
Likes
231
Rating
4.82
P
PrintablesYoshimi Koyama

Silicone Ditto(Pokemon) Mold

This is a 3d printed mold designed based on https://www.printables.com/model/382059-happy-ditto Ditto should be very soft, so I made a 3d printed mold for Ditto and poured silicone into it. I added a little bit of red coloring(for…

Downloads
822
Likes
309
Rating
5
P
PrintablesBc3d

Creality K1/K1C Silicone Nozzle Cleaner Mod using A1/A1 mini silicone brushes

This is a Remix of K1C Silicone Nozzle Cleaner Mod adapted to use 2 A1 or A1 mini nozzle brushes I don't have a K1C. I made this mod to test on a K1, and only applied the suggested changes to printer.cfg (see original model comments) YMMV…

Downloads
819
Likes
141
Rating
5
P
PrintablesJL O

Creality K1C Silicone Nozzle Cleaner + hinge + z protect

En mi caso he impreso con PA6-CF a 0,08 de altura de capa y 30mms de velocidad, con un relleno de 15%.

Downloads
811
Likes
104
Rating
5
P
PrintablesAztairya

Silicone / Sealant Cartridge Cap Improved

Sealant cartridge cap to conserve your opened cartridges. Fits standard cartridges. Beveled flange and corners for a tighter seal and easier grip. Print upside-down due to the bottom bevel (or sink it into the bed when slicing). Works…

Downloads
805
Likes
73
Rating
5

Moulage molds for silicone casting

Simple, 3D-printable molds that can be used to cast moulage wounds in silicone. Moulage is the art of applying mock injuries for the purpose of medical simulation training. Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament brand:…

Downloads
804
Likes
107
Rating
0
P
PrintablesDbdf

4in round block mold box for making 2 part silicone molds, ideal for full sets of dice

The box's internal dimensions are 4in diameter by 2in deep. 4 asymmetrical keys allow you to easily line the mold halves up and create a very positive fit, which prevents shifting in any direction. Use binder clips to hold the halves…

Downloads
787
Likes
141
Rating
4.6
P
PrintablesSealight333

Bambu Lab X1C/P1P Nozzle Wiper with 2mm Silicone sheet

Bambu Lab X1C/P1P Nozzle Wiper with 2mm Silicone sheet. Print the design with higher temperature materials like PETG… ABS, ASA Recommended to print the design laying on the side. Cut 14x17 mm rectangle from 2mm silicon sheet. Insert the…

Downloads
786
Likes
235
Rating
5

Silicone Tube Cap

It is a quickly designed cap for a silicone tube. You may want to scale down .1% for a tighter fit. Update: I was adding a seal with a piece of tape. To improve the design I added a screw mechanism to tighten the tip. I am leaving the…

Downloads
772
Likes
68
Rating
5
P
PrintablesTimTwix

Silicone Sock Mold Nextruder - Prusa MK4 / XL

I developed a mould for silcone sock of nextruder. So far I estimeted the dimensions based on the pictures. The mould is already working. V9 update: - nozzle lenght decreased - open version added (for these version both mould halfs are…

Downloads
742
Likes
269
Rating
4.91

Wound packing task trainer - molds for silicone casting

3D-printable molds for silicone casting. Wound packing task trainers are simple educational models that can be used to teach/learn wound packing procedures to stop bleeding. Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament…

Downloads
720
Likes
82
Rating
4.67
P
PrintablesYoshimi Koyama

Silicone Gengar(Pokemon) mold

My second try on designing a mold for Pokemon. As I look through all Pokemon related models on Printables, I found Gengar very suitable to be made soft and bouncy using silicone. It has two pouring holes (under Gengar's foot), and three…

Downloads
709
Likes
179
Rating
5

Silicone Nozzle Wiper for Creality K1/K1 Max

This is a simple mount for a silicone brush to wipe the K1's nozzle with. It mounts to the rear where the plate is attached. See pictures for details. Reuses the same screws. For the brush, you have two options: --- Option 1: Use a…

Downloads
701
Likes
177
Rating
0
P
PrintablesMerlwynd

Silicone Tube Nozzle Tip

This thin nozzle tip fits a 3m marine silicone 3 oz (88ml) tube, but will likely fit other tubes (silicone, grease, other sealants, adhesives, etc.) of similar size or shape. The nozzle tip is quite fine (i.e. small outlet diameter) for…

Downloads
696
Likes
67
Rating
5
P
Printableskrizo96

Silicone Cartrige Nozzle Cap

Have you misplaced your silicone nozzle cap? Maybe you just didn't get it in the package (like in my case)? Well, here you go! It's the perfect length and taper for the nozzle. The threads are modeled so it screws on and off easily! It's…

Downloads
669
Likes
104
Rating
4.67
P
Printablesszprusa

Silicone Sealant tube multiple nozzle, nozzle cleaner and cap with FreeCAD (RT) file

Silicone Sealant tube nozzle nozzle cleaner cap with FreeCAD (RT) file. I printed with 5 perimeter and with 0.16 layer height from PLA. Update 2023.12.28: WARNING : not printed and not tested… siloplast_v2.FCStd - can be loaded with stock…

Downloads
669
Likes
70
Rating
5
P
PrintablesHades1986_

Silicone Brush Nozzle K1C

After looking for replacement parts for my K1c brush and not finding them for sale, I decided to look if someone had created one, but they all differ in some way from the original, so I decided to replicate the original myself. Printed on…

Downloads
663
Likes
116
Rating
5
P
PrintablesSlimo

Tool for applying silicone

Simple tool for applying silicone

Downloads
650
Likes
75
Rating
4.75
P
PrintablesThomas Levendig

Silicone Sock Mold, for Nextruder/MK4/XL

This silicone sock mold is used to create socks for the Nextruder hotend, which is used on the MK4 and XL. It consists out of 3 parts, and is easily assembled and put in a clamp to keep it closed. The middle part requires some supports,…

Downloads
636
Likes
245
Rating
4.8
P
PrintablesDjambo

Silicone Wire Spool Holder

A box to hold your prototyping wire spools, making them organized, In sight and not in way. The original design holds 6 wire spools but I also provided STEP files so that anyone can modify it however they like. For the original version,…

Downloads
635
Likes
205
Rating
4.82
P
Printablesmotocoder

Jig for Silicone Tube Leveling for Prusa Heatbed

This is a jig used to cut 9mm pieces of silicone tube for use with the Silicone Tube bed leveling mod for Prusa MK3 printers. The mod is described very well here: https://github.com/bbbenji/PMSBLM and here:…

Downloads
628
Likes
75
Rating
4.94
P
PrintablesAcoustic Lemur

Silicone Soap Mold

Printable parts for creating silicone mold - cast your own design-ish soaps. Including models in step format for simple remixing. You would need: Soap positive (printable, four designs included) Mold base (printable) Mold shell…

Downloads
618
Likes
156
Rating
5
P
Printablesn3kx

Flipper Zero Case compatible with silicone case

This is a remodel of the Flipper Zero case. It uses groove to fit flipper zero with its silicone case and also deeper groove for text so it can be easily inserted and printed. Its print with no supports you gonna need 8 M3x20 screws.

Downloads
615
Likes
96
Rating
4.33
P
PrintablesTifn

Enhanced silicone caulk shaping tool

Here is my solution for a silicone caulking tool. I'm rather satisfied with the results in my kitchen, so feel free to try ! Several chamfer sizes are available (I used 6mm). I believe that this shape design makes it easier to succeed in…

Downloads
588
Likes
73
Rating
4.5
P
PrintablesTinkering Poko

Flashforge AD5M\pro nozzle brush using Bambulab A1 silicone brush

[Changelog MK2] 20251103 User @CoreyRogers_489647 reported interference with bed issue. Lightly remix to increase clearance. UNTESTED. ----------------------------------------------------------------------------------------- As suggested…

Downloads
574
Likes
222
Rating
5
P
Printables626abad71b
18+

The source marked this model as adult content.

Downloads
563
Likes
149
Rating
5
P
PrintablesYoshimi Koyama

Silicone Ditto(Pokemon) Mold V2

I improved my previous mold that makes silicone Ditto. https://www.printables.com/model/413425-silicone-dittopokemon-mold Improvements: Combined two small holes that are for pouring and air leaking into one very big hole to allow easy…

Downloads
552
Likes
158
Rating
5
P
Printablesptitduke

Silicone cap

Fast printing with a 0.6 nozzle (12min)

Downloads
540
Likes
69
Rating
5
P
Printablesdante257

First Layer Calibration/Bed Level Correction (e.g. for Prusa Mini Silicone Mod)

I made my own first layer calibration with a bigger center square and horizontal infill and 45 degrees infill for the corner and side squares. This way you can easiely dial in your live z for the center and look at the difference early.…

Downloads
531
Likes
25
Rating
5
P
Printablessarvenn

Silicone squeege

100% infill

Downloads
530
Likes
42
Rating
5
P
Printableshorrovac

Silicone cartridge nozzle/cap

Standard silicone cartridge nozzles are too wasteful for my taste - you have to push out a great volume of material to fill them and get it going out of the nozzle. Also, there's never one around when you need it, because they're…

Downloads
519
Likes
86
Rating
4.86
P
PrintablesJCShumpert

Voron 2.4 A1 Bambu Silicone Brush Wiper

Print this remixed part in place of “Voron Purgee Wiper bracket.stl”. The wiper has an adhesive backing so it should stick directly to this part. You will print the other files from the original model.…

Downloads
519
Likes
75
Rating
5
P
PrintablesRobert 4x4

Silicone tube holder

It bothered me that I didn't have an exact overview of the types of silicone I had in the workshop.

Downloads
515
Likes
48
Rating
5
P
Printablesromanslezak78

Silicone Caulking / Silicone sealant straightener

1) remove the old silicone 2) clean with, for example, isopropyl alcohol 3) apply silicone and wipe with an 8 mm squeegee in the direction of the slant (so that the silicone gets everywhere without air bubbles) 4) tear off the silicone…

Downloads
502
Likes
67
Rating
5
P
PrintablesBrainBug

Silicone trowel / Silikonabzieher

Hello, i always have trouble to create nice silicone joints and startet to look for some handy tools. I saw some good tools in wood, but they were very expensive (4€ each size). Good we have 3D printers, so i designed some and tested…

Downloads
500
Likes
54
Rating
5
P
PrintablesPrzemekgda86

Final Version Nozzle Wiper for Anycubic Kobra S1 (A1 mini silicone)

After countless tests, I am proud to present the ultimate nozzle wiper design, perfectly tailored for the Anycubic Kobra S1 . This design solves the most common issues: Perfect cleaning thanks to precisely matched dimensions. Eliminates…

Downloads
493
Likes
87
Rating
5
P
PrintablesMicha Hainz

Silicone Caulking Nozzle with Integrated Smoother

3D Printed Silicone Caulking Nozzle with Integrated Smoother This nozzle streamlines silicone application, combining dispensing and smoothing into one efficient tool. Designed to fit standard caulking guns. Key Features: 2-in-1…

Downloads
478
Likes
55
Rating
5
P
PrintablesGioteya Designs

Base for silicone molds, plaster, etc

This model is created to be used as a base to make silicone, plaster, etc. molds. Print 4 pieces to get the base and fasten them with 4 clothespins (then it is recommended to fill the joints in the base with plasticine to avoid leaks).…

Downloads
460
Likes
136
Rating
5
P
PrintablesCNC Kitchen

Improved Silicone Sock for E3D V6 hotend

This is a mold for an improved silicone sock for the E3D V6 hotend that is harder to come loose during printing. Use with 2-part high temperature silicone. Video on the whole process: High temperature silicone (aff):…

Downloads
460
Likes
135
Rating
4.93
P
PrintablesIlya Bravada

Creality K1C Silicone Nozzle Cleaner (Bambu A1 Wiper)

here is my prtouch_v2 config section which works with that cleaner for me: [prtouch_v2] # K1 pr_version: 1 step_base: 2 z_offset: 0 noz_ex_com: 0.05 tilt_corr_dis: 0.03 tri_min_hold: 2000 tri_max_hold: 6000 pres_cnt: 4 pres0_clk_pins:…

Downloads
458
Likes
78
Rating
4.5
P
PrintablesDan

15g Silicone, Caulk Remover

A tool to remove silicone and caulk.

Downloads
448
Likes
99
Rating
5
P
Printablessixfiveohtwo

Easy-pour mixing cups for epoxy, resin, silicone - Multiple sizes

This is a series of mixing cups with a spout shape so that you can pour accurately without product dripping down the sides. The spout is not too big so it doesn't interfere with complete stirring. I made them for use with 2-part resins,…

Downloads
442
Likes
51
Rating
5
P
Printablesverdrus

Cartridge (caulk tube) lock (acrylic, silicone etc)

To prevent drying out of acrylic or silicone catridges I designed this tool. It has a sealing ring inside. The sealing ring is about 15x10x3 mm German version: Um zu verhindern, dass Silikonkartuschen zu sehr austrocken habe ich diesen…

Downloads
429
Likes
53
Rating
4.67
P
PrintablesINeedOneDesigns

Prusa XL Silicone Nozzle Wiper / Brush

Prusa XL Silicone Nozzle Wiper. I didn't want to use a metal brush wiper on my brass nozzles, so I made a silicone wiper. I have had this working well on my 5TH XL for a few weeks now. It gives a nice squeegee wipe clean. Parts you will…

Downloads
427
Likes
222
Rating
4.85
P
Printablesyolo345

silicone mold casting aid

you have to print 4 pieces of this model. for this there must be either 2 times each one size or 4 times the same size. setup: take the four parts and put them together like in the picture, now you can secure them with screw clamps or…

Downloads
421
Likes
137
Rating
5
P
Printablesdachu02

silicone gun (caulk gun) glue dispenser - pistolet do silikonu

ENG: silicone/glue dispenser - caluk gun 4 small screws needed to attach base to the glue tube print with 0.2 resolution no support needed infill min 40% (the more the better) PL: pistolet/wyciskacz do silikonu (dodatkowo potrzebne 3-4…

Downloads
407
Likes
104
Rating
4.83
P
PrintablesCassine Weaver

TPU Ring Like Silicone

There are two types of rings in here. One is wider “mens” and the other is narrower “womens”. Both are set to a 20mm inside diameter. Feel free to go into the Fusion360 file and change the diameter to fit your finger. These rings are very…

Downloads
396
Likes
39
Rating
4
P
PrintablesFeveredMind

Bambu A1 silicone nozzle scrubber mount - Remix Voron Trident

I am using Tap on my trident which pushes the hot end forward, thus making a rear nozzle scrubber very difficult to use. Clearances are extremely tight. I added a angle to the front of the brush holder to get the brush as close to the bed…

Downloads
395
Likes
82
Rating
5
P
PrintablesKevinrob

Silicone Joint Smoother

Printed at 0.15mm with PLA+ no support

Downloads
393
Likes
33
Rating
3.67
P
PrintablesJE

silicone caulking nozzle tip angle adapter

In a tight corner, the caulking gun may get in the way. This 135 degree angle can be screwed between the glue/silicone cylinder and the nozzle. Tested with Bison, Den Braven and Pattex cylinders. Printed in PETG 0.15 mm with supports.

Downloads
392
Likes
86
Rating
4.67

SuperLube silicone grease dispenser nozzle - simplifies lead screw lubrication

Fits SuperLube 3 oz Silicone Lubricating Grease, model 92003. Features Long nozzle to apply a bead of grease along the leadscrew as well as making it easier to access hard to reach areas. Tight threads to eliminate leakage when applying…

Downloads
389
Likes
175
Rating
5