411 models
Put together your own little western train The Sattle Tank locomotives are pure workhorses that help to create space or move wagons over short distances. There are also 2 wagons that transport either timber or livestock, which can be used…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
We usually mount a rear lamp and simple tool bag on the bottom of the saddle, and many products provide a way to doing that. However, sometimes we need to mount more than one items and they could make some conflict each other. It seems…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
Important: This fits only the GbE Version, also called: USW-Flex-Mini This is a simplified version of the unifi usw flex wallmount. It is simplfified for easier printing. Print on the flat side! (mounting holes touching the print plate)…
V1.4, 16. Aug. 2024: Minor changes to the simple base Minor changes to the display V1.3, 20. Dec. 2023: Simple base added V1.2, 19. Dec. 2023: Shorter lever rods Shorter lever handles Panel added V1.0, 17. Dec. 2023: first release I…
First of all, thank you for your awesome models iczfirz! Removed the original base and simplified it to make just the Mandalorian printable. I prefer just the character without complex bases. No infill, no supports. Just print it!
More info: https://www.prusaprinters.org/prusament-spools-reuse-ideas/
Based on the extraordinarily accurate model created by Thingiverse user kimgooni . I did some small invisible simplifications on the model to save a couple of hours of printing support structures. It results in 16 hours of printing with…
Magnetic Gunstock for Oculus Quest 2 (Improved & Simplified) After printing three of these for friends I decided to improve a few issues I found and greatly simplify the process for others. Most of the source models have disparate and…
Put together your own little western train The 4-4-0 is an icon of railroad history. I created my own version as a tribute and based it on the shape. The somewhat comic-like variant allows you to put together your own little train. There…
I have compiled a collection of models that can be used to assemble a 3D printed version of Noctua's NV-AA1-12 Airflow Amplifier so it can be used as a desk fan. You will need the following hardware: 2x M4-12mm screws 2x M4 heat-set…
Slightly scaled down with a new, minimalistic design. Print Settings Printed in 1.75mm matte black PLA. (any material works, maybe even wood on a CNC machine) 0.2mm layer height 80% infill, but I'd recommend 100% for durability. Brims to…
I'm not a fan of wasted time or material so I remixed this Mitutoyo 6 in caliper holder to save on both. There is still a small storage bin in the bottom to hold extra batteries or anything else of a similar size. Change log v1 (…
Introducing my Jinx Chompers! Update: Decided not to opt for a paid file. This is my first proper upload! Changed to Simplified and Enhanced Versions. Both available for free. Please give me some feedback on the design :) Designed with…
I needed to make a ghost trap, but after printing and assembling 200+ parts for a pair of proton packs, I was willing to give-up some detail for lower parts count. This trap looks pretty good and has working doors but only consists of six…
By far one of my favorite eras for Link! I've learned a lot about organic / tree supports while trying to print this model. I have had issues with the sword, sheath, and cap using slicer generated tree supports. My suggestion is to add…
This is a remix of Light Switch Lock by Yllonnoce on Thingiverse. I've removed the “no” symbol and removed the plastic behind the symbol to simplify it as much as possible. This design prevents flipping a light switch off, which is useful…
REMIX CHANGES: I combined the three pieces that constitute the supporting structure/base for the target. The original relied on gravity, and maybe some friction to keep the structure together. This version is stronger and more rigid, but…
I simplified this model so that it can be printed without supports and use regular adhesive strips instead of the picture hanging “velcro” ones.
Why buy a world map, when you're able to print one? Saw the YT Video of RCLifeon and really liked his idea - googled 'simplifed world map svg', added it to Fusion 360 and adjusted the size, so it's easy printable with a Prusa MK3S. There…
There are two test in one piece, I removed half leaving just one test as that's enough for what I'm testing.
This is a simplified 3D model of the iconic Porsche 911, designed with smoothed-out classic lines and reduced fine details for easier mold creation. Ideal for crafting soaps, cakes, chocolates, resin castings, and other DIY projects, this…
This two-part tree model is designed for easy 3D printing. Both parts can be printed flat on the build plate without the need for support structures. Once printed, the two parts can be effortlessly joined together to create a realistic…
I just love the hitch cover by user Ron Harding. But holy cow it's complicated. Remixed to be a little easier to build. EDIT: Now one piece. Should print in most printers. This is printed in ASA so it will survive year round Texas…
Basic parameters: Phone holding lenght: 72.6 mm Dimensions: 72.6x83.3x64 mm Supports: not required (bridge)
Print both files two times
Martin is the king of Stargate models. Since Martin's model was uploaded, the PrusaSlicer added the ability to paint MMU colors directly onto models. As such, I went ahead and remixed his excellent model and painted a few of the model…
Simplified version of my Synth Mask model. This version can be made without vacuum forming the visor and will work with cut plastic panels for the vision. The model fits on a print bed with a 300x300x400mm bed size. I sliced it for easier…
THERE IS NO CAD FILE. I hacked these together in TinkerCAD. Plano 3700 series are cheap and readily available. The 3-28 model is usually less than $6 at Walmart. See my original remix for more information about the Plano 3700 series…
SSD1306 OLED Display Reference Model (0.91") A simplified, accurate 3D reference model of the popular SSD1306 0.91 inch OLED display. Perfect for CAD work and designing custom enclosures without having to measure the actual component! How…
Simplified lego city train curved track rail for easier handling and faster printing. Should be printed with supports.
ctf_2fort comes to your desk in this small printable model form! The model comes with its .stl file, .3mf project file and a pre-prepared lower print time low quality .gcode file for a 16cm long print for the Prusa i3-mk3s+. If not using…
There are four models to choose from. This design is an improvement on Stackable storage crate 260 x 200 x 180, fitting on Ikea floating shelve. by jattie | Download free STL model | Printables.com to facilitate easier printing and…
Simplified BetaFPV Pavo Pico mount for O4 Air Unit (Lite) without carbon cross
This is a simplified reproduction of an official Harry Potter "Hogwarts Express" Christmas ornament. The more I worked on it, the more I could see discrepancies between the Christmas ornament and "the real thing". Nevertheless I stayed as…
Simplified F1 Car with removable tires. Install wet tires or soft tires. Tires can be made of TPU for a real-like feel. Recommended Settings: Infill: 25% Supports: On *Original design, took inspiration from:…
Simplified lego city train straight track rail for easier handling and faster printing. Should be printed with supports.
Quickly and easily clamp all the small things with these spring-powered parallel clamps. I made an effort to keep the design simple with easy to print parts while updating the CAD to match other SuperMod clamps. You can find an up-to-date…
The original 3DBenchy was deliberately designed as a challenging test model for evaluating the capabilities and print quality of a 3D printer. This remix serves a different purpose. I wanted to integrate the familiar 3DBenchy shape into…
A very simple version of the XIAO ESP32C3 with only its essential features for printing and testing fit in projects or designing cases. Its a 1 to 1 representation of all the sizes of the original model.
Changed the Band aid tray to remove the clip system. Plus adjusted tolerances slightly to to fit better.
I was looking for some nice Geometric stuff to print with dual color filament and found this amazing design from https://www.printables.com/de/@dgemily and adjusted it to make it faster to print. Instructions: Print Wolf-Fox-Simplified (I…
This is the small version , also the large version is available on my profile. The download includes the .pdf with parts and assembly. Curiosity is a car-sized robotic rover exploring Gale Crater on Mars as part of NASA's Mars Science…
I like the original idea a lot but the trophy was too complex for my taste so i simplified it.
prints in about 2 hours with .2 mm layer,15% infill and 2 perimeters
Credit on Printables to: @ IDVx Consulting @ GunplaMark I have remixed and simplified the prior designs above: Revised the filament exit Revised the base and rollers to be one piece with integral desiccant bin. Left off the hydrometer and…
M-30 HOWITZER: SOVIET 122MM M-30 FIELD HOWITZER model. Scale approx. 1:18. Original Designer Assembly Instructions: To secure the wheels to the axle, use 2 screws 3x16mm (diameter and length without head), with washers with a diameter of…
This is a remix of my own Travel Battleship game. After having printed two sets of games, I saw that there are a lot of parts (2 x 64 markers). Then I realised that it is not necessary to track your opponent's shots, with exception when…
Shortened length of end part to make it easier to connect. Simplified the design to allow upside down printing. Print Notes: Orient upside down. Use plate supports for snap lips. If you plan to print high temp filaments, print the…
Simplified version of the original to allow for support free printing in any orientation.
Needed to make covers for terminals and mounting brackets so I made a simple model. PSU looked good enough to share. Still working on the terminal covers and mounting brackets. Will upload those when they're finished.
I liked the Juice cheek rest design and changed it up to be a bit smaller and support free. I printed mine with 10 walls of PA-CF but other materials are probably fine. The CF gives it a nice texture. Hardware list from original: 1x 80mm…
This Mask is a simplified version of the original RC3 Mask by Prusa Printers. It requires only one SINGLE punch with the perforator into the A4 laminated paper. It simplifies and speeds up the assembly. You can convince yourself by…
Based on Unifi USW Flex Mini Wall Mount - simplified. Adjusted to fit the Unify USW Flex Mini 2,5G
This is a remix of the Micro-Swiss model which retains all of the critical geometry, but greatly simplifies the model by removing the fillets. This is meant to serve as a starting point for further customization without having to deal…
Full credit: this remix is based on a Brigham Young University Compliant Mechanisms Research (BYU_CMR) Group design posted on Thingiverse. Check out their user page on Thingiverse for other great compliant mechanisms. I remixed the design…
This is a remix of 0110-M-P's excellent Raspberry Pi case. All the legwork was done by them - I happened to want a simpler looking design and needed to play with designing grilles that could be 3D printed. See 0110-M-P's thing here for a…
This is a remix of @CNCKitchen's clear mk4 gearbox cover. I modified his step file to match the R3 prusa part's holes, and printed it in clear resin at a paid service. It came out LIKE GLASS. The picture of the 3 versions are my original…
I found some design decisions regarding original Satsana duct problematic, but being single part, to me it is more appealing than other solutions. I wanted to achieve following goals with this design: Easier mount mechanism Your hot-end…
This is my modified housing for the filament sensor on the Orbiter 2.0. I added an ECAS fitting and compared to the original, I only used an Omron D2F microswitch with a ball. There are two variants, for 5mm and 5.5mm. Print 0.2mm layer,…
@tjdesign's Magic Magnet Tool is super useful to avoid messing up the polarity of embedded magnets in your models. However, I didn't see why the model needed four different pieces. So I re-implemented it in Fusion but built the thread…
Remix of these models: https://www.printables.com/model/96792-filament-clip-holder https://www.printables.com/model/84113-simple-universal-filament-clip-v3
a Mario Kart Live play set thats optimized for hospitals, with minimal geometry for easy cleaning. the gates are made of 4 parts, with two identical legs and two segments for the banner. the two banner sections should snug fit and i…
plr_hightower comes to your desk in this small printable model form! The model comes with its .stl file, .3mf project file and a pre-prepared lower print time lower quality .gcode file for the Prusa i3-mk3s+. My main recommendation is to…
Slides into the original EDC V1 steer tube system. Swap the o-rings from the original tool carrier and slot the multi-tool into the recess. There is a backstop on one side to rest against the tool and keep it snug. I hated the tire lever…
The BIGTREETECH Manta M4P is a simplified version of the original model based on the source code available on GitHub. This motherboard includes the main components but does not feature many SMT components.
This is a simplified version of mtairymd's Ring Puzzle. Designed in FreeCAD 0.18.
I decided to build the simplified Mandalorian rifle posted by Straeker as a friend's costume prop, but: I did not trust myself to be able to align and glue the parts together without issues I wanted to make some of the parts a little…
As soon as I got the Ender3 V3 KE I wanted to move the spool off to the side, but I wanted to mount the runout sensor at the original location. Using this combination of brackets makes for a stable and centered mounting location, while…
Remix more simple to print faster :) Available in different lengths as orginials 11mm (as resquest of a user) 28/10/2024 22mm 29,4mm 36,8mm 44,2mm 51,6mm 59mm 66,4mm 103,4mm 147,8mm 172mm 180mm (as resquest of a user) 27/12/2025 188mm…
Updated with V2 for Bambu Studio for a simplified clock face body. Added a generic 3MF that is compatible with PrusaSlicer and others at the request of @tfhh
4/17/25 im removing the old version since it makes no sense to have a complicated mess when the new one is so simple 4/15/25 Iteration is always good, I've simplified it even more and have improved cooling. so this is the final I also…
I found that the original spool holder designed for the Ikea Lack Enclosure was overly complex with the printed rollers. Additionally, with jerky printer movements, spools could unseat themselves and roll away. I designed this simple more…
Modified model from @PrinterIsComing to have the same color finishing on the same level - it makes it easier to print it in color with manual filament switching. The original badge it pretty thick, it can be scaled down to 75% at Z axis.…
If you want to download the textured model, it is available for free on ArtStation and Gumroad . This is an accurate recreation of the 12th Doctor's (Peter Capaldi) TARDIS (F/G props) from BBC's show "Doctor Who". This is a simplified…
Simplified version of the "Logo Dunk" corner stand: https://www.printables.com/model/152529-gamecube-logo-dunk-corner-stand Functionality-wise it's almost the same. However due to the reduced size, this stand will be LESS stable. Use at…
A very simplified, generic MRI or CT scanner designed to be used as a prop in a demonstration for a project. Scale up or down to fit different needs. It is intentionally, not a specific brand or design and not as deep as most real MRI's.…
This is a simplified version of Chromatic Pic's excellent design. Uses a fair bit less filament so it prints faster and is economical! PRESTON RING HOLDER 8U will hold 8 preston single channel rings. This is only printable on a Prusa MK4…
I've found that other GoPro clip mounts are fairly slavish reproductions of the originals. Which would make sense if we were doing injection molding, but they're always far more finicky than they should be. This is a replacement mount…
An Ames lettering guide is the best friend of anyone hand-drawing blueprints or lettering comics. It easily makes consistent guidelines for words anywhere on a page with the help of a T-square. A full guide is generally transparent…
This is a simplified 3D model of the exquisite Pagani Zonda, featuring smoothed-out aerodynamic lines and reduced fine details to facilitate easy mold-making. Perfect for creating soaps, cakes, chocolates, resin castings, and other…
This is a simplified 3D model of the distinctive Renault 5 Turbo Rally car, featuring smoothed-out aggressive contours and reduced fine details for easier mold creation. Ideal for crafting soaps, cakes, chocolates, resin castings, and…
First, huge shout out to who made the first version. This is based on the: Xbox Controller Stand for IKEA SKÅDIS PegboardXbox Controller Stand for IKEA SKÅDIS Pegboard However, I had a few things I didn't like about the existing model…
A simplified version of the Chartres labyrinth as flat marble maze. I was inspired by those little skill games aka mini ball puzzles than an actual marble track with slop. To learn more about the church with the original labyrinth:…
Simplified archer for easy printing
I remixed the Design by NotaBrick by simply removing the openings for the GPIO and the Ribbon-Cable-Connectors since i didnt needed them for my project.
Ford maverick pickup truck scan simplified from ~1mil kb to ~10k kb
For Mounting the Mosaic Palette 2 (or Pro) upside down on the wall. There are two versions of the collar. A solid version and a 'swing out' version. The swing out allows for easier removal of the device to clear jams, etc. It's held…
T-800-A simplified version
I got rid of unnecessary bumps and trimmed lock “buttons”. Just check the picture below: On the left is my remix, on the right - original design. I did it as a proof of concept - only for 20mm and only for double holes - If you're…
I've basically just filled all the internal holes (there were many), Removed all the details in the bottom, made the axles thicker and simpler, should be much easier and faster to print. It's not perfect though, I am new to 3DP. :) It's…
I have been making lots of use of Whity's box design but the inside fillet has been a problem to design custom inserts so I have removed them. This version is 120x120x30 box and 120x120x25 on the lid, this is very easy to adjust in…
Simple Multi-Color Edit Colored Trap-Doors Colored Panels
Simplified on blender
You can mount the normal Sv08 Spool holder on it print settings: 3 walls / 15% infill / no support needed
This is a simplified CAD reference model of the Raspberry Pi 5 , intended primarily for designing cases, mounts, brackets, enclosures and other parts around the board. It's available in: F3D STEP 3MF STL I created it because I wanted an…
MZ4250 is amazing. Probably objectively the single best mini creator by volume, cost and quality of work. I'm running a Curse of Strahd campaign and in Kresk there is a little Gazebo by a magic pool so of course that Gazebo needs to be…
remixed from HP Elitedesk 800 g2/g1 SFF Server Face by magicGnome96
This remix aims to make the nozzle wiper look sleeker and more reduced. I really like @Dutch_443178 's approach to keep it simple with just one part but I wasn't pleased with the rectangular shape and that the silicone brush is not in the…
![[REMIX] Side Release Buckle - simplified](https://media.printables.com/media/prints/917750/images/7006805_04dd4aef-3719-4355-bb57-fdb52ebd8d02_57d356ca-cecf-45f0-acf6-d730b4040afa/20240619_232036.jpg)
