945 models
Here is a modification ONLY for 2.5-generation 3DP (2 heat sink holes in front) part of snapmaker 2.0 3-in-one printer. BOM: 5015 Blower 24V 0.1A HX2.54 2Pin (*1) airflow ≥5CFM (the original 2510 fan is 3.6CFM) M3x20 screw (*2) M3x2x5 nut…
This fan duct is designed for Snapmaker J1 parts cooling and heat break cooling. Cooling performance is improved by using a 5015 blower fan. *However, the cooling performance is slightly inferior to the previous version. But, cooling can…
Deutsch im Anschluss. You don't like the original filament spool holder on your snapmaker anymore or you are looking for an ultimate strong holder for 2 filament spools? With this mount, the fight is over! Filament change faster and…
Snapmaker 2.0 Enclosure Filament Holder Adapter Function: This adapter relocates the filament spool holder on the Snapmaker 2.0 enclosure from the long side to the narrow rear side, addressing space constraints and accessibility issues.…
It goes on the front of the metal on the bed. There is a square hole for custom mounts. I forgot about the enclosure door though so it is perfect for those without the enclosure. It wont damage the door, just open it every time it goes to…
🚀 U1 MagLight – Magnetic LED Light for Snapmaker and original Top Cover Is it too dark or boring inside your U1 printer enclosure for you as well? 🌑💡 I wanted a clean and bright setup for my Snapmaker U1 Top Cover , so I developed this…
Snapmaker U1 DIY Top Hat By. Srin Snapmaker U1 DIY Top Hat 입니다. This is a Snapmaker U1 DIY Top Hat. 최소한 250mm 출력이 가능한 프린터가 필요합니다. A printer capable of printing at least 250mm is required. https://github.com/srinn/Snapmaker-U1-DIY-Top-Hat…
Model on OnShape: https://cad.onshape.com/documents/4e3090b46d9b709aea63f673/v/b97632534c31523e887014c7/e/ff16d7d87dbe54cd935d3aec I printed the model with black PETG. The model needs to be placed at 45 degrees angle to fit. 10% infill…
This is an adapter for the Snapmaker U1 to use an IKEA Samla 45L box or a Walmart Sterlite 55L/58qt box as a top cover. It is meant to be a simple but very functional design. You can slide your box back for ventilation. No need to remove…
CZ: PTFE adaptér pro podavač tiskárny Snapmaker U1 - Bez demontáže originálního krytu podavače - Tisk bez podpor - Tisk bez závitu pro PTFE konektor - Výška vrstvy 0.16mm - Tryska 0.4mm - Čísla vstupů v modelu - Materiál PLA Doporučuji…
Cover your fan in style with the Auxiliary Fan Cover for Snapmaker U1! Featuring a Snapmaker logo, and hexagons (the bestagons).
UPDATES AND USER SUPPORT ARE NOT LONGER PROVIDED IN PRINTABLES - NOW FIND THEM IN: https://space.snapmaker.com/en/model/29016-u1-ikealler-top-cover#profileId-43941 https://makerworld.com/en/models/2494052-snapmaker-u1-ikealler-top-cover…
CZ: Tento držák PTFE trubičky jsem navrhl jako řešení pro bezpečné vedení filamentu ze sušičky do podavače Snapmaker U1. Umožňuje vést PTFE trubičku v kontrolovaném radiusu, takže se neláme, nekrčí a nezpůsobuje zvýšený odpor při podávání…
Reupload of Beaver Works 's great work that he uploaded to MakerWorld The official Snapmaker top cover costs a whopping $249 ... and my wallet simply did not approve of that purchase. So, I had to take matters into my own hands and create…
This spool adapter model is designed to work with the Snapmaker U1 3D printer. The adapter will accomodate any spool with an inner diameter over 60mm. Dimensions: Inner diameter - 55mm Outer diameter - 60mm Height - 75mm Overall Width -…
A Gridfinity-compatible hotend holder remixed to fit Snapmaker U1 hotends . This version is designed for fully assembled hotends and keeps them organized, protected, and quick to identify and grab from your drawer. Included sizes (current…
Adapter für größere Spulen am Snapmaker U1
8/15/26 Update: I've since learned that the grille on the bottom isn't for cooling any electronics—It's just a hole that goes through the bottom of the machine for no apparent reason. Added a solid cover print profile to help retain heat…
In certain cases, you may need to manually level the print bed of the Snapmaker U1. Fortunately, this is done via the firmware on the display. You need to turn a knob at each of the four corners under the bed, following the instructions.…
Snapmaker U1 YATC – Yet Another Top Cover The official Snapmaker U1 top cover won’t be available for a while, and most community designs I found rely on custom-cut acrylic windows (accurate, but expensive and annoying to source). So I…
Why and what for This will allow you to connect 4mm OD (standard size) PTFE Tubing to Autofeeders of Snapmaker U1. You can customize all the colors. Discussion topic -…
Since the original assem,bly instructions for the panda breat tell you to raise the assembly off the ground and I did not want to clamp the assembly with too much force I have upgraded the original designe by adding supports. On the…
Fan Duct for the PSU and the Mainboard of a Snapmaker U1 to improve the cooling and isolate the cold air flow from the chamber. I also publish my CAD (FreeCAD) and STEP files for further remixing Printed with ABS for heat resistance.…
The Snapmaker U1 has a bad habit of throwing its poop over the edge of the bucket. This deflector connects to the nozzle wipers and creates a barrier to help guide the waste filament into the bucket. Features: Can be printed without…
Both a 2, 3 and 5 slot snapmaker U1 build plate / bed holder
Basic tool tray for most of the tools that came with the Snapmaker U1 printer. As per the original model by Gur (which the model I remixed is a remix of), use the screws that were holding the buildplate down to attach this to the holes at…
Modified Orca Slicer settings for Snapmaker U1 printed with eSun PLA+ and PETG
The community has created some incredible, creative solutions for the Snapmaker U1 enclosure. However, most are quite bulky and require significant time and material. Born out of a need to finish a project with a nearly empty roll of…
UPDATES AND USER SUPPORT ARE NOT LONGER PROVIDED IN PRINTABLES - NOW FIND THEM IN: https://space.snapmaker.com/en/model/28480-ikealler-toolbox-for-u1 https://makerworld.com/en/models/2569138-ikealler-toolbox-for-snapmaker-u1-by-amelo…
This remix is a technical refinement of the original toolbox tray, specifically tailored for Snapmaker U1 users. Key Enhancements: Fixed Geometry: Repaired 82 non-manifold edges for error-free slicing. Ultra Material Efficient: Reduced…
Snapmaker U1 Bottom Tray Front/Rear The front tray is used to discard brims and other residues, while the rear tray is designed to catch filament that occasionally falls to the bottom during multi-color printing.
This is my first Model for the 3D Printing community as it's been take take take for me, for years !!! So this is my attempt to give something back. You're Welcome !!! OBJECTIVE The intent was to silence the power supply Fan and cool the…
This adapter block allows for the filament feeders on the side of the Snapmaker U1 to be rotated so that the filament feeds in from the bottom and out the top. This allows for better placement of a dry box or filament spools under the…
The popular Ikea Samla bin was not easily available in my area, but it was easy to purchase a Sterilite 55L/58Qt plastic bin from a local Walmart. I used the original model from the enclosed link and remixed it to fit the Walmart…
This is a Snapmaker U1 profile for a remix of Majora’s Mask, designed specifically for 4 color toolchanger printers like the Snapmaker U1. The original remix placed multiple models on the same plates, which resulted in excessive filament…
Full Spectrum is a fork of the Snapmaker Orca slicer. It includes support for virtual mixed-color filaments designed for the Snapmaker U1 multi-color printer with independent print heads. https://github.com/ratdoux/OrcaSlicer-FullSpectrum…
Have first-layer adhesion problems or get a new Snapmaker U1? Use this model to test it with for your Snapmaker U1.
The door on the Snapmaker U1 doesn't open much further than 90 degrees by default, and I wanted less restrictive access, so I put together this 180-degree door hinge. It uses compression-style fittings to hold the glass door to the hinge…
German: #Beschreibung Der Bowden Clip für den Snapmaker U1. Ideal zum Ersetzen bei Defekt oder um die vorhanden Clips zu erhöhen. Druckeinstellungen Druckmaterial: PETG (für offenen Drucker) - (ASA für Geschlossen) Layerhöhe: 0,2mm…
If you have a Snapmaker U1 and you use an IKEA Samla or Walmart Sterilite box as a top cover this might be for you. This build plate holder should work with most of the top cover adapters out there. I even made extra high versions if your…
Tool to make removing the PTFE tubes on the Snapmaker U1 (or any printer with 6mm PTFE tubes) easier.
By popular demand, and with permission (even encouragement!) to share by Snapmaker including the logo, my miniature display model of the Snapmaker U1 3d printer. The build and video were not sponsored by Snapmaker, though they did provide…
With Paxx12's extended firmware for Snapmaker U1 , you can use custom RFID tags for your filament and the U1 will automatically recognize the properties for each tool head. This works great when you put the spool with the tag on the spool…
Fits Snapmaker A250T and A350T. Check the images to see if your 3D printer tool head looks the same. Instructions: This page is for the multi duct part cooling fan adapter and spool holder parts. The Snapmaker A250T and A350T are…
The cube consists of four solids: the main solid is a 20x20x20mm cube that forms the body of the cube. The next three solids have cross-sections shaped like the letters X, Y, and Z. The cube was prepared for the Snapmaker U1 for a 4-color…
This is modified to work on my Snapmaker U1. No supports needed, just a sliver to fit to base popout.
First off, attribution: This is a remix of the laser bed corner inserts by morpha on thingiverse. Found here: https://www.thingiverse.com/thing:4857543 During my testing, I figured out the true 0,0 of the Snapmaker A350 (at least mine) is…
Darthwolf's clips are a great idea, but for me they just loosely sat in the laser bed and didn't really do anything. Instead, I've redesigned it with wedged feet so that it squeezes in between the slots and can hold a piece down. EDIT…
This project includes cooling brackets for mounting 92 mm Noctua NF‑A9x14 fans to the Snapmaker U1 mainboard and PSU, along with a chamber insert/divider that improves airflow and adds thermal separation inside the electronics bay. Print…
This universal adapter allows spools with larger inner diameters (55–75 mm) to be used while remaining compatible with smaller spools, such as those for SnapSpeed or BambuLab filament. It attaches securely to the original spool holders…
This tool tray mounts directly in the front of the Snapmaker U1 using the shipping screws. It holds the scraper, snips, cleaning brush, hex keys, spare spring, spare screw bags, and has two extra storage areas. Fits flush to the front of…
This front tool tray is designed specifically for the Snapmaker U1 and provides a convenient way to organize your tools and accessories directly on the machine. Since tool layouts and preferred setups often change over time, this design…
Snapmaker advises against printing PLA with the top panel on the printer, because the environment heats up which can cause heat creep. If you still want to be able to use the top panel on the printer while printing PLA, you can use these…
Saw a lot of bin covers that were overly complex, and I just wanted something quick and easy until the official cover is ready for release. These are just some simple mounts to keep the bin (Sterilite 58 quart from Walmart) securely…
The original spool holders are a bit difficult to take a lot of spools on and off. I think they did it that way so RFID spools would stay nice and close to the reader, but if you are like me and not using that much Snapmaker filament so…
Tried to make the PSU side cover easier to print, and slightly stronger, changed pins to holers, and changed spacing, moved fan as much as possible towards vent, added notch for fan cable. Made the mainboard from scratch. it uses the same…
UPDATE: I have replaced the profiles with ones containing four build plates. The following versions are included: V1.0 - classic version with feeder holders that fit snugly to the housing curves, PC4-M6 V1.1 - classic version with feeder…
German: #Beschreibung Ein Spulenadapter für die Alten Sunlu V1 Spulen auf dem Snapmaker U1. Der Innenring kann aus TPU gedruckt werden um die “Hemmung” auf dem Adapter zu erhöhen und ein herunterfallen zu verringern. Das Modell wurde auf…
The standard SAMLA Hat by Beaverworks wasn't quite what I wanted so I made my own! This version sits flush (or as close as I could get it) with the top of the U1, It therefore also doesn't cover any of the sides. It also comes with half…
Snapmaker U1 fan duct The built-in drivers reach temperatures of up to 90 deg. Celsius which may reduce the lifetime of the drivers. A fan duct with a 40 mm Noctua fan (type NF-A4x10 40x10mm 5V PWM with USB connector) reduces the…
Have you felt like your Snapmaker 10W Laser Module is missing one key feature - an Air Assist System to reduce scorching when engraving or cutting? At least I have. After I saw a really cool mod by german YouTuber Raagnarix (that involved…
The Snapmaker J1 came with some nice tools, but no where to put them. so I whipped this up real quick. Mounts on the left side of the printer. Have to remove two of the M3x6 screws on top. replace the m3x6 with two m3x10 screw to mount.…
This is a complete set of washers for PTFE tubes for the Snapmaker dryer and U1 printer. There are 8 washers, 4 of which are threaded, allowing you to use the original filament feeder housing from the Snapmaker U1 printer and attach a…
The Snapmaker U1 has a massive gap between the door and the chassis. This gap remover should help retain more heat inside and also reduce the noise coming from the machine with the door closed. Instructions Print in TPU. I used 95a. Print…
I recommend printing from PETG CF, better from PA CF. Attention - the upper elements must be compressed. The special feature of the mount is that you can quickly remove and put back the heater.
Update 01/10/26 Increased cutout for the bases by 1 mm. Update 04/09/26 Added 3mf print file Adjusted left and right base sensor cutouts. Update 30/08/26 - New revision added, the following has been added. Desiccant storage system has…
This is a tool holder for the Snapmaker U1. It is made for the set of tools that came with the printer. The tools are easy accessible and don't interfere with the spool holders. The tool holder attaches to my top cover adapter which has…
🚀 Snapmaker U1 Minimalist Fast Print Spool Holder 🚀 Need to use a third-party spool with an oversized center hole on your Snapmaker U1 but don't want to wait hours to finish printing? This design is for you! The focus here was on speed…
Introduction Quite a few people keep their Snapmaker U1 close to the floor which makes the touchscreen a bit harder to see and use. This mount allows tilting the touchscreen upwards for better visibility and usability. This is not an…
Mounting Hole Cover for Snapmaker U1 Spool Holders This is a simple snap-in Mounting Hole Cover designed for the Snapmaker U1 spool holders. It neatly hides the unused mounting holes and gives your setup a cleaner, more finished look. It…
Snapmaker U1 tool head Cable protection and PTFE pipe fixation
Je n'ai pas trouvé de solution plus simple pour brancher mon alimentation sur mon boîtier SNAPMAKER A350. J'ai également modélisé une version qui se fixe sur la partie inférieure de l'enceinte, mais je ne l'ai pas encore testée.
A completely printable 40 mm lid riser/top hat for the Snapmaker J1 or J1s. Inspired by edgett’s “Snapmaker J1/J1s Tophat” here on Printables which requires custom aluminum sides and Thomas Levendig's "Top Panel Riser - For Snapmaker J1"…
A simple adapter for connecting a tube (4 mm) to the printer's filament feeder, allowing you to connect a dryer or filament box not in the original location on the printer. The hole for the adapter is 6.5 mm in diameter and without thread…
There are three versions: R3 - Uses M3 screws and heat set inserts for assembly (recommended) R3b - Uses M3 screws and captive M3 nuts for assembly R3c - Uses 5mm x 3mm magnets for assembly This prints in two parts and then assembled. You…
These remixes are based on these three things: Logitech C270 tripod, by luc_e, December 27, 2015 C270 Focus Ring - OpenSCAD included, by biomushroom, August 24, 2016 snapmaker base plate, by Okatake, February 12, 2018 (Note: I tried to…
Bracket for moving the feeders to the rear left and right. A 1.25MM GH1.25 extension cable is required for installation: https://de.aliexpress.com/item/1005011978215116.html 100CM 26AWG 15POS 1.25MM GH1.25 Male Female Extension GH GHR-15V…
To make filament loading easier and reduce the drag on the filament I designed this PTFE guide. It is designed for the original reverse bowden tube which has an outer diameter of ~4.4mm (instead of the normal 4mm). I would not recommend…
Tested on the Snapmaker U1, should work on the BambuLab A1/mini AMS units too.
This is a toolbox for the Snapmaker U1. It is made for random tools and stuff you need close to your printer. There are different size that you can choose from. Watching from the front of the printer the depth of the of the boxes are…
Simply a power supply unit (PSU) stand for Snapmaker 2.0 A350/F350
This is a Bowden tube holder that slides on to hold the the tube in and clips the USB C wire to it before they go to the hotend unit. That I mixed from a tube holder from makerworld w the Bowden Clip from Printables. I printed mine on my…
Summary A mod for the stock filament spool holder on the Snapmaker 2. While designed for the Snapmaker, it should be fine with anything that uses an 8mm diameter rod to hold the filament. The Problem I think the Snapmaker is a pretty well…
A slightly modified version for M10 socket connectors and for my design of the lower filament feeder in the Snapmaker U1 printer. The author of the original version is: Lukáš Komenda Buy him a coffee!
This is a direct replacement of the stock Snapmaker J1 / J1S part cooling fan shroud. It moves the air directly to the tip of the nozzle, and not onto the heat block as the original one does. The air should also flow better on all sides,…
Only 46,72g of waste! Snapmaker U1 Optimization: Fine-tuned settings for better reliability and smoother printing on the U1. 4-Color Repaint: Mapped specifically for 4 colors to make the ribbons and details pop. Efficient Prime Tower:…
This is a bit of a remix of my dust fence to make it shorter so there's no collisions. These are to give you a definite, repeatable origin for use with the CNC. You can combine them with my fence to help contain dust on the work surface…
Reduced height Gridfinity holders for Snapmaker U1 hotends.
English : Holder for quick installation of the laser plate on Snapmaker 2.0 A350, this accessory has been inspired by the great one from my friend Knightrider_007 ;-) You need to print 2 of them in order to fully assemble the plate.…
Installation steps (see images): Remove the rail end (two screews, pink wrench). Move the rail with module two slots back on the platform (green wrench). Slide in the extension piece. Secure it in place with M4x14 screews (same as the…
Here is my remix of this toolbox I found. Thank You to the creator! I had trouble printing his version, so I remix this to extrude the text in and made some of the tolerances bigger. It prints well at normal settings but it is a 27 hour…
The original spool holders on the J1 can be a little to short for some spools. Easily print this version, which locks in place with the same system. With this spool holder, you can use spools up to 96mm wide. Printing: No supports are…
Bowden Collet und Clip, 4MM Collet Extruder Plug Parts used: Amazon AliExpress
The ridge should hook fairly firmly, but I still taped it to the back just in case. Please use the cover, hepa, and fan case from the original model.
I needed a 90deg diverter for the exhaust vent on the enclosure. Uses the existing port screwed into this diverter. Material: PLA Supports: Yes Additional Parts: M4 x 8mm (used 4 of these to secure existing exhaust port)
The clips will push into the aluminum work surface used on the Snapmaker machine when set up for work with laser. One side pushes against thick work, the other will hold down paper or cardboard. I found the rubber pieces that Snapmaker…
A simple tool for combing out the cutting scraps from the Laser Bed of the Snapmaker Artisan. Designed to be flexible and quick to print, prints in about 6 minutes. Made with Onshape: Source CAD: Snapmaker Artisan Laser Bed Comb Print…
A PTFE Guide will fit into my glass lid lifter: https://www.printables.com/model/546618-snapmaker-j1-top-frame-with-glass To make printing easier, I designed a support structure that you can easily remove after printing. PETG/ABS, no…
I have my U1 in a tight space and wanted a solution to avoid having to drag my printer to the sides to make room whenever I needed to load spools. RFID tags still work. I recommend PETG. REMOVAL INSTRUCTIONS: you need to rotate the…
This retrofit converts a Snapmaker J1 from rear-mounted filament to a front-loading spool system. The two filament holders utilize the empty space inside the printer to the left and right of the bed and can be loaded from the front which…
