SNZB 02 outdoor cover
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL Case for the Sonoff SNZB-02 ZigBee temperature and humidity sensor.
- Downloads
- 122
- Likes
- 24
- Rating
- 4.8
153 models
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL Case for the Sonoff SNZB-02 ZigBee temperature and humidity sensor.
I wanted to remotely measure temperature and humidity inside Creality Space Pi dryer. Also the built-in humidity dryer is not behaving reliable, as it won't go below 15 % R.H. So I used spare SNZB-02 thermometer for this, because it (so…
The 3D printed mount is designed to perfectly fit the Sonoff SNZB-03 Zigbee motion sensor, ensuring a snug and secure fit. Whether you prefer a more permanent installation with screws or a flexible and removable option with magnets, this…
A remake of the included mount for the SNZB-02D in case you want to make extras, and another mount for use on dry boxes. The other mount can also be used on windows, or any time you want to mount the sensor on the interior of something,…
Slim case for the Sonoff SNZB-02 ZigBee temperature and humidity sensor. This holder helps you to easily access the sensor without sticking it directly to the wall. Install the case with a screw or double sided tape and slide the sensor…
I wanted to mount the sensor to the underside of a self, and the included magnetic mount doesn't allow it to rotate close enough to horizontal. So I designed this clip, which has allowances for the top button and the USB-C socket on the…
The Sonoff SNZB-02 sensor is a simple and cheap ZigBee temperature and humidity sensor. The default mounting option is using a sticker to attach it to the wall. However, walls tend to be colder than the room they are in due to thermal…
EN: This stand allows you to place the Sonoff SNZB-06P presence sensor on flat surfaces like shelves or cupboards without wall mounting. Uses the included magnetic plate for secure hold Slot for easy routing of the USB cable Recommended…
Ich habe den Halter von Grund auf in OpenSCAD neu modelliert und unter der Basis sowohl Platz für einen Powerstrips Small, sowie Platz zum Entfernen geschaffen. Aufgrund der Bauart von Sensor und Switch halte ich ein Herausgleiten für…
This is a holder for the Sonoff SNZB-01 Zigbee Button
As these sensors use batteries, I wanted a mount where I can remove the sensor, replace battery and mount it again without the need to replace the double sided tape. This collection includes the following mounts for: SNZB-03 PIR sensor…
cradle for sonoff SNZB-03 motion sensor made with openscad Have fun!
It can be printed with 0.2mm layer height and with no supports, no need to rotate the models. Remove both the sensor and magnet from their original cases. Keep the screws holding the sensor PCB to the case as they will be used later. Push…
Outdoor case for the Sonoff SNZB-02P. I just taped the orange, magnetic mounting plate inside.
I've purchased a couple Sonoff SNZB-06P mmwave Zigbee sensors, but I didn't like that the size of the sensor was so large with the magnetic base. So I designed this back cover to make the device much smaller. It is possible to stick it…
Wall corner mount for SNZB-03. Designed for double-sided tape mounting. You can easily slide slide the motion sensor in and out if you want access connect button or replace battery. Print a little smaller in case you want friction when…
This is a holder to fit the Sonoff SNZB-02 Temperature and Humidity Sensor to the Ikea Skadis Pegboard. Category: Electronics
Originally made by puzon from Thingiverse.
Modification for Sonoff Temperature Sensor SNZB-02 that will allow use of 2xAAA batteries instead of a CR2450 battery. Why do you need such modification: - longer lifespan for battery compared to coin battery in terms of capacity - AAA…
Pozwala wygodnie zamocować kontaktron Sonoff SNZB-04 ZigBee na oknach PCV.
A remix of ilMitch_97530's temp sensor bracket/holder/screen. I modified it to fit the round SNZB02P temp sensor. Since this sensor is larger, I had to increase the size of the overall model and make a new holder. Printed in PETG with no…
This holder allows you to mount a Sonoff SNZB-05P water sensor to any surface in any orientation. It features a snug fit and retaining arms so the sensor can even be mounted upside-down. The sensor is easily removed for battery changes.…
Case for Sonoff SNZB-04P door sensor. Should be tight fit, so adjust if needed !
The alignment of the reed switch is optimized, so its not missing an impulse of the gas meter. Just get the PCB out of your SNZB-04, put it in the clip and install the clip to your gas meter.
Einfacher Wandhalter für den SONOFF SNZB-02 Zigbee Temperatur/Luftfeuchtigkeit Sensor Ich habe hier eine einfachen, schnell zu druckenden Halter für einen SONOFF SNZB-02 Zigbee Temperatur/Luftfeuchtigkeit Sensor entworfen. Er wird mit…
I made this so the button is not rambling arround the house and people know where to put it (if they take it out). I didn't want to glue the button directly to the wall, because it kinda reduces it's wireless functionality, hence this…
Remix of the original model to screw to the wall. Also resized the holes to fit my 10mm magnets. Should work with 3mm screws or so.
I was replacing a Tuya sensor with a Sonoff SNZB-06P. I wanted to mount the sensor in ceiling, using the existing hole made by for the Tuya. This mount both accepts the Sonoff SNZB-06P, and cleanly uses the existing hole for the Tuya. If…
The Sonoff SNZB-04 Door & Window Sensor is designed for blunt (is this correct? correct me in comments please) doors and windows. But most European doors have a rebate, which causes the sensor to fail. Hence, there was the need for a…
If you are no fan of the orange tab sticking out from the original magnetic mounting. Twists into place. No supports
I wanted to place the Sonoff SNZB-04 Zigbee door sensor on my garden door to switch a light. I designed this housing to be water resisting as far as PLA printing is water resistant. It all fits snugly together with overlaps so that water…
This is a mount for an inexpensive PIR motion sensor. They can easily be stuck flat on the wall, but if you want to put them up higher, you'll probably want to aim them down, hence the creation of this item. This mount fits Sonoff Zigbee…
Corner mount for Sonoff SNZB-03 motion sensor with a decline angle of 30°. Mounted with double-sided tape. Designed to fit snugly around the sensor. When not mounted to a wall the sensor can slide in and out sideways. If the fitment needs…
Inclined stand for the SONOFF SNZB-03 zigbee motion sensor. Printed in PLA with 0.2 mm quality. Simply fasten it with a wall screw through the hole provided, the sensor fits inside from the top and remains secure, allowing it to be…
Same as the original but with a hook for Ikea Skadis. Uses the geometry of the infamous Universal Skadis Hook. I recommend printing at a 45° angle with tree supports the auto-generated ones should work fine. Requires 6*3mm magnets just…
I found the original case to be impractical and difficult to open. The model includes a snap in base plate for easily remove the sensor for battery replacement. Another advantage is that the battery is additionally fixed, which improves…
Hello, I made this model to add pool temperature to Home Assistant. Print well in ASA with 15% infill. I used glue to assemble the probe part with the float. You can screw a circle of plexiglass on top, protecting the Sonoff module.
Alternative housing for Sonoff Zigbee motion sensor.
Door sensor magnet piece raiser. Enables you to fit both pieces flush in case the door frame is not aligned with the door surface. Fits snug, maintaining the original Sonoff decor. You may want to tweak the height to your door/window…
The metal cradle which came with the sensor releases the double-sided tape within a day. And is orange anyway. So I made a plastic cradle which holds the tape well and also can be attached with the screw packed with the sensor. There is a…
Print with a support for the USB hole. Requires a bit of glue to connect the two pieces.
SONOFF SNZB-02WD IP65 Zigbee LCD Smart Temperature Humidity Sensor holder.
I printed it with PETG 3 perimeters 18% infill 0.6 nozzle 0.2 layer height
This motion sensor is installed in the room with my Ender 3 Pro. I realized that when the 3D printer is operating, the sensor is triggering on this movement, causing it to signal occupancy/motion frequently and significantly impacting…
This simple model allows to put the Sonoff SNZB-02D inside your ACE Pro
The original case of the Sonoff SNZB-04 was horrendous to use. Clips break, you need to rip it off your windows to replace a battery and often times the whole PCB comes flying out when you break one of the retaining clips. I redesigned a…
Modification for Sonoff Temperature Sensor SNZB-02 that will allow to use 2xAAA batteries instead of build in CR2450. Why do you need such modificaton: - longer lifespan for battery compated to coin battery in temms of capacity and…
This is a case to mount the new SONOFF IP65 Temperature Sensor. I just used double sided tape to stick it just outside my window but i included holes for countersunk 4mm screws. I printed it at an angle standing on one edge but i suppose…
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL Držák na zeď pro senzor SNZB 02. Pro nalepení pomocí oboustrané lepící pásky nebo přišroubování. Možno použít i pro tlačítko SNZB 01. Pro tlačítko můžete…
PLA/PETG/ABS/ASA Infill 100 Brim No Support No
The switch was difficult to find on the bedside table at night, simply because it is so small. The switch also slips around quite a bit on a smooth surface. So I designed two different bases to make the switch more prominent. The V2 is a…
Give your Sonoff SNZB-03 motion sensor a "blinkered" view with this nifty 3D printed side cover! Perfect for making your sensor play a game of "I can't see you" in wider spaces. Slap it on, and voilà, no more alerts when your cat struts…
I want to use a Sonoff SNZB-04 Wireless Door/Window Sensor outside to check on the status of my yard gate. I neither trust the original case to be wind/water/weather proof, nor do I believe in sticky tape (especially outdoors). So I made…
For some reason, Sonoff decided to change the design of their old motion sensor (SNZB-03), which was neat and compact and great for ceilings, but with their new design (SNZB-03P) they decided to add a magnetic mount that adds 30mm of…
Shell for SONOFF SNZB-01 and SNZB-02. This casing serves as protection or for mounting your devices, featuring four holes for M3 screws. It can be 3D printed with any material, though softer materials like TPU are recommended. SONOFF…
“Emergency” push button enclosure for a Sonoff SNZB-01P Zigbee switch. I made it so my wife can easily find the button on her bedside table and start her coffee (even in her morning semi-conscious state) so it is ready when she stumbles…
I made a mount for the Sonoff SNZB-03 sensor! Here are some details: Designed for : Sonoff SNZB-03 sensor. Screw hole : 3mm, for easy hanging. (example TX10 3mm Printing side : Sloped side should be on plate Strength : I used 4 walls for…
Einfacher Wandhalter für den SONOFF SNZB-01 Zigbee Wireless Switch Ich habe hier eine einfachen, schnell zu druckenden Halter für einen SONOFF SNZB-01 Zigbee Wireless Switch entworfen. Er wird mit zwei Senkkopfschraube an der Wand…
This wall mount is designed to match up to your remixed Sonoff SNZB-02 Temperature Sensor cases: https://www.printables.com/model/826509-sonoff-temperature-sensor-snzb-02-aaa-case-remix…
I replaced my hallway lights with smart bulbs (Zigbee), but wanted the switches to still be functional. Most existing options wouldn't work because my hallway lights are set up as a 4-way switch with no neutral wire. I bought Sonoff…
A housing to lift the senor away from the frame to align it with the magnet. This raises the sensor by 15mm, the sensor does NOT have to align flush with the magnet to work i believe a +- of 5/7mm will still work adequately. I decided to…
I have a security door and doorpost, both made of metal. I designed this small bracket for the Sonoff SNZB-04 door and window sensor to be able to mount it to the door and the doorpost without any impact to the door. The pockets for the…
This is a remix of the SONOFF SNZB-02WD Temperature Sensor Desktop Stand posted by SONOFF on MakerWorld. This stand is designed to hold the SONOFF SNZB-02WD Smart Temperature and Humidity Sensor at an optimal viewing angle when placed on…
Remix with added 2mm thickness to base layer.
Holder to put a Sonoff SNZB-02D in a dry box. That way you can see your dry box temperature and humidity without looking into home assistant! I used M3xH4 inserts and M3x8 screws to secure the holder in place, but you can possibly get…
SO i made various sizes of spacers for my Sonoff SNZB-04 sensors to make them attach a bit easier to your doors/frame/trim. Body 1 is the smaller piece, Body 2 is the larger piece. I made each spacer at 3mm/5mm/10mm and 15mm. I then made…
Battery Case for Sonoff Tuya Motion Sensor I have created a custom case designed to hold two AAA batteries, specifically tailored for the Sonoff-SNZB03 or other Tuya motion sensor. You can choose between two options for installation:…
I remodelled the original design with an angled body for better visibility and usability. It restores the original viewing angle and uses the original bracket to prevent it from tipping over. Printen in 0.2 PLA. (Pictures show a fast…
I didn't want to stick it to the wall but hang it => spacer with a hole for the screw head. Nechtěl jsem lepit na zeď ale zavěsit => distanční podložka s otvorem na hlavu šroubu.
Simple print, no need for supports. I printed at 0.3 for speed. More flexible than just using the provided sticky pad. It is a tight fit.
Station météo pour capteur de température et humidité SNZB-02P SONOFF
Simple mount for temrature and humidity sensor from Sonoff. Model SNZB-02. Can be printend without supports. Best printed with front on printplate. Material, layerheitht not important. Print without support.
If you want to use Sonoff Button SNZB-01 as a doorbell it might be difficult for your guests to recognize that ithe butt
If you open the box, there's just a small magnet inside. So I've made smaller case to fit in the space between the frame and window. You have to press a little bit harder to get the magnet inside and once you have it inside, it's not…
I wanted to add some motion sensors to my home automation setup, but don't like dealing with batteries. While there are products out there that directly go from a USB plug 5v to the 3v required by the Sonoff sensor, I had a few extra…
Instead of using screws, I wanted to use double-sided tape to install a Sonoff SNZB-02D in my dry box. So I added the 10mm mounting flange where you can easily put enough tape on. I printed with PETG, 0.2mm, 15% Gyroid, support on build…
A outdoor little hut holder thingy for the Sonoff SNZB-02P zigbee temperature and humidity sensor. Has 2 holes for cable ties and a (very) snug snap fit for the sensor itself. Those sensors technically arent outdoor rated, so use at your…
This is a remix to attach a Sonoff SNZB-06P Zigbee Human Presence Sensor to IKEA Skadis pegboards.
A simple kinda hidden wallmount for Sonoff SNZB-02LD Zigbee smart thermometer with four embedded magnets and screwholes Magnet size: 6x2mm and there is four holes for them, you might get away with only two magnets but i went with four.…
this is a small remix of a great fitting model by triano. i modified the offset from wall to sensor to be just tall enough for my german window. you can use the doublesided tape provided. there is a regular version which is 10mm thick and…
2 different stands for Sonoff SNZB-02LD thermometer with probe. 1st one is table stand and 2nd one is for rimless 5mm glass aquarium. Sensor goes in with pressing it in and there is hole in the back to push the thermometer back out for…
I wanted to use a Sonoff SNZB-02 temprature sensor outside. So I designed a ‘birdcage’ like holder. You can put the sensor in from under the unit. It has some holes to let air throug. Print without support if you put the roof on the…
Modification for Sonoff Temperature Sensor SNZB-02P that will allow use of 2xAAA batteries instead of a CR2477 “coin battery”. Why do you need such modification: - longer lifespan for battery compared to coin battery in terms of capacity…
Filament: PET-G Infill: 15% Support: Snug
For SONOFF SNZB-04PR2 SenseGuard DW Gen2 Zigbee Door/Window Sensor. Door magnet riser up to 10mm. The bottom surface is designed for standard 19mm wide adhesive tape (but you can cut it to the required size in a slicer if needed). Very…
Motion Sensor für Alarmanlage Decken Montage. Gedruckt mit Prusa MK3s+. Gehäuse mit AA / AAA Batterien Metall Batterie Federkontakt (https://amzn.eu/d/0EVajlx99).
French Ce support permet de ficher un capteur Sonoff SNZB-04P (ou Sonoff SNZB-04PR2) sur une porte de garage basculante. Il permet simplement par effet de gravité de déclencher ou pas le capteur. J'ai dessiné ce support lors de…
This is a wall mount for the Sonoff SNZB-02P . It comes in different versions: SNZB02P mount simple : has a thin backside and can be glued to a surface, e.g. a wall SNZB02P mount thick_backside : The backside is 5mm thicker - this should…
I saw a version of this holder on another website, but it was designed to fit the HCW. (credit to dkduck) I needed it to fit the Multiboard System. So, my intention was just to add the Multiboard Snap but I ended up changing most of the…
Es wurden abweichend zum Original oben und unten feste Bohrlöcher angebracht für eine feste Installation im Außenbereich und die Größe wurde ein wenig verändert für eine bessere Passform.
This is a bottom box for SNZB thermometer made by Sonoff, that is nice IoT device used with Zigbee. Problem is that SNZB battery (CR2450) is costy and lifetime is short, so this enclosure incorporate the electronic and even bigger battery…
I made this as I use a Sonoff SNZB-01 in the garage to control the dust collector and air scrubber. Even though it is bright Yellow I can still never find it when I need it. There is two different clips supplied. One is long for a bigger…
Sensor mount for Sonoff SNZB-02P Outdoor housing: https://www.printables.com/model/1014449-outdoor-sensor-housing BOM 1x M4 threaded insert (https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m4-standard-50-stk-pcs) 1x M10…
Batteriebox für den Temperatur Sensor Sonoff SNZB-02D für 2x AAA Batterien Battery box for the Sonoff SNZB-02D temperature sensor for 2x AAA batteries
A simple design to secure a Sonoff SNZB-02D Zigbee sensor to your Multiboard setup using a Flush snap. Use the magnetic support included with the sensor and attach it to the printed part with the provided double-sided tape. Ensure the…
This is a reupload of a full-size dummy model of the SONOFF SNZB-02WD Smart Temperature and Humidity Sensor. Here is the description provided from the original source: This is a 1:1 scale replica model of the SONOFF SNZB-02WD smart…
Added more surface for the glue to @StaszekSalik_627023's model.
Штырьки для крепления находятся под уклом 4 градуса, что обеспечат нормальный прижим и не требует использования пластиковой лопатки для снятия, в отличии от стандартной крышки. Единственный его недостаток, что нет дополнительной поддержки…
This model gives a smooth surface for a refrigerator door to seal over the probe wire of the Sonoff SNZB-02LD. This allows you to mount the display outside of the appliance for readability while significantly reducing leaks from the gap…