4,404 models
Socket sizes: *Imperial Short 500 12pt - 1/2 inch drive - 3/8" to 1" in 16th increments *Imperial Short 375 12pt - 3/8 inch drive - 1/4" to 13/16" in 16th increments *Imperial Short 375 8pt - 3/8 inch drive - 1/4" to 1/2" in 16th…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
I found it simple enough to split the GoPro mount .stl this is remixed off of, and added fuzzy skin and top ironing. Including .3mf file so you can see print settings. Thanks to @The best stork for their remix of @Phillip9933's Google…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
cute 10mm socket buddy gift
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
A cluttered sink, a dangling charger, a trimmer awkwardly balanced on the edge… sound familiar? This is exactly the kind of daily hassle that inspired me to design this socket-mounted Philips OneBlade holder. Thanks to real-world use and…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
Want to support me? Interested in the PCB holder shown in the picture and want to support me? Check out Stickvise, my low profile soldering vise: Information: http://www.stickvise.com Buy it on Amazon: http://amzn.to/2dgmQCE Summary Ball…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Updated ─ [ March 15, 2023 ] Plates to close the holes have been added when changing the position of the fitting socket. [ January 26, 2023 ] A PTFE tube cap has been added. ─ *Printing with flexible materials such as TPU is recommended.…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Da mir keine Steckdosenhalterung für den Amazon echo dot 4 gefallen hat, habe ich selbst eine konstruiert. (Hier in einer Busch Jäger Steckdose.) Alles bezieht sich auf die EU Version! Ich weiß NICHT ob es an die US Verison passt! Alles…
Print approx. €9.66–€11.80 excl. taxPreliminary estimate for one variant
Da der echo pop nun im Angebot war, habe ich für dieses kleine Teil nun auch eine solche Halterung entworfen. Da ich so wenig wie mich in der Tiefe aufbauen wollte, habe ich den echo pop diesmal über dem Netzteil platziert. Also wenn man…
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
I did like the original design, but I did not like the support in between. Now there is a two part version which prints with minimal support or even without. Just screw the two parts together with M3 screws and M3x5mm brass inserts. I…
Print approx. €6.32–€7.73 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE : [May 14, 2024] Added STEP files. NOTE : This set of prints is now complete, with the sizes and dates added as follows : 05/18/22: #4,#6,#8,M2,M3,M4 05/10/22 : #10, M5 05/19/22 : 1/4",M6 05/10/22 : 5/16", M8 05/19/22 : 3/8",M10…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Toolbox socket organizer for 1\2 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Simple yet useful. I made in PETG Infill: 20% Layer Height: 0.2mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Multi socket wall holders with different mounting angles, holder clips and a top cap for the straight mount version. Filament used is Prusament PLA Vanilla white. The multi sockets/power strips that fit these holders are sold by Biltema…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
I created this tool to help with opening and closing the case back on my watch. It's confirmed to work with a Seiko SBDC051. This might work with other models that have a 30mm distance between the case back slots. One of the photos shows…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
Toolbox socket organizer for 3\8 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 54mm…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for PETGSource material: PET
Toolbox socket organizer for 1\4 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Universal holder for Smartphone with popsocket. Fits all standard PopSockets. There are four ways of mounting with cable ties through the special cable tie holes with a screw - diameter 3mm suggested with double sided tape with clip for…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
Wall Socket Refrigerator Magnet with universal hole pattern for 2 to 4 pieces of magnets ⌀4 - 10 mm x height of 2 or 3 mm are uploaded. Please let me know, if you need different holes for your magnets. Support material is only needed…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Ich brauchte einen Ersatzknauf/-griff für meinen Wasseranschluss meiner Waschmaschine im Keller. Dieser hat die, meiner Meinung, nach unschönen Rastbuchsen mit 7,7mm Durchmesser. Ich hab ein stark verändertes Remix durchgeführt und tadaa,…
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
Socket set for 1/4" drive metric sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Print approx. €4.64–€5.68 excl. taxPreliminary estimate for one variant
After I had printed the NASA space wrench in PETG, I realized that the wrench is actually tougher than I thought. I put a metal socket on it and it felt like it could really be able to tighten some screws. Since I needed something to…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
This stencil (or template) is used to locate and mark the location on a project box for adding a C14 power inlet socket (this is the female socket typically used for standard computer AC power cables). To use the template simply place it…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Contains an power socket cover blank and one with a Clip for e.g. Router power supply for german power sockets. Printing with PETG recommended due to flexibility. Enthält ein Steckdosenblanko zum selbst modifizieren und eine Clipversion…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
Set of 5 commonly used hand use sockets with a box to keep them together in a gig bag for common sizes on guitars, pedals, or amps. Especially for guitar finishes, using these will be better than metal sockets that can scratch the…
Print approx. €9.85–€12.04 excl. taxPreliminary estimate for PETGSource material: PET
18V Makita Battery Adapter: See my design here https://www.printables.com/model/436132/ 18V Bosch Professional Battery Adapter: See my design here https://www.printables.com/model/427974/ 1x Power Switch: Switch size 21 x 15mm Front…
Print approx. €4.16–€5.08 excl. taxPreliminary estimate for one variant
These covers were used in the initial design for my toothbrush holder https://www.prusaprinters.org/prints/145283-space-saving-outlet-or-light-switch-mounted-tooth-/ The decorations are simple Greek inspired floral stencils. The design is…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 52mm…
Print approx. €4.99–€6.09 excl. taxPreliminary estimate for PETGSource material: PET
Banish the clutter of electric toothbrush cords from your bathroom countertop with this sleek solution! If your spouse has been nudging you to tidy up and you own an Oral-B IO Series 6/7/8/9 toothbrush (the models sans a display charging…
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for one variant
Socket set for 1/4" drive imperial sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Print approx. €4.67–€5.71 excl. taxPreliminary estimate for one variant
4 endcaps for Nema 17 sized stepper motors, allowing the use of GX12 (12mm diameter) locking circular multi pin connectors. More robust than the usual 6 pin JST connector or straight wires coming from the coils, both of which are prone to…
Print approx. €1.03–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
Simple Fox Fork Topcap Socket, 26 and 32mm, flat bottom, ½" drive. Be aware that the topcap should be tightened to 25Nm and some 3D printed plastics may fail at that torque I printed it in Ankun PLA+, since PETG Did not work.
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
The original file didn't suit for my sockets, so I adjusted it. Now it's fitting like a charm. Big thanks to the creator if the original file for providing the files for editing.
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
Descriptions printed on a Brother printer on 18mm color transparent tape. 2022-11-07 - I added files of new samples, extended to show layers. PLEASE SEE MY OTHER PROJECTS! :) https://www.printables.com/pl/social/236468-nieuniknione/models…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Gerändelte 12V Zigarettenanzünder Abdeckung Designed für Skoda Octavia - natürlich auch universell einsetzbar. Mir gefiel am Ende die Version mit mittelfeinen Rändeln (Version “mid”). Tip: Einen guten Alu-Drehteil look erzielt man mit…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
The most pluck-in holes are not deep enought for easy removal of socket protectors. This one has a deep of 12mm. The part has a total height of 16mm
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
I printed the various socket organizers, and my son has this set of Pittsburgh color-coded metric deep impact ½" drive sockets he asked me if I could print him a tray. I couldn't find one already made, and did find the actual sockets…
Print approx. €9.00–€11.01 excl. taxPreliminary estimate for one variant
UK Wall Socket Blank Blanking plate to replace redundant kitchen water heater switch. Standard UK size. 10mm deep. Regards, Paul.
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for PETGSource material: PET
Print without support;
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
A socket holder for the Honeycomb storage wall sockets with 0,25 inch square holes
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Not sure if this is a good idea or not, so think about whether or not to you want to take the risk of using this. USE THIS AT YOUR OWN RISK! You could shock yourself attempting to install it. I used it with a LED bulb that does not get…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
just a fun gift for mechanics, car guys or anyone who would like it. I have made them for people, and they love them. It does need supports and they can be a bit of a pain, but overall, I love it.
Print approx. €3.66–€4.48 excl. taxPreliminary estimate for one variant
Rescale the Key to 80% Printing with PetG with 15% infill Key - without infill.
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Socket extension holder/plate for quarter inch ratchet extensions. Gridfinity 1x4 size.
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
Desktop phone stand fits a variety of devices and cases. Compatible with Loopy cases and with Popsockets or other fixtures attached to the back. Print instructions Prints clean with no supports required. Model will come into the slicer…
Print approx. €2.89–€3.54 excl. taxPreliminary estimate for PETGSource material: PET
These brackets are to fit a AM4 CPU fan to fit on a LGA 2011-3 Socket of an X99 Motherboard. The example shows the fan to be an AMD Wraight. In the example pictures I used a Kingroon KP3S Pro V2 to print. Happy printing!
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
Podrobnosti česky najdete zde: https://3d.odkaznik.cz/sio-m The socket is used in all types of 8-bit Atari computers and their peripherals as an SIO bus connection point. The socket can be used to build modern peripherals or used as a…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
This is intended to prevent fingers from entering a bulb socket where you didn't put a light bulb. Easily screw in/out using a coin or a screwdriver. Why you don't just put a light bulb in there is up to you, but now you can put this…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
This is small project for emergency box for 10 mm socket. I've bought this emergency key box . They aren't very expensive (deppends on a store) and it's much more easier than making whole box. Maybe looks nicer too. The box is 120 x 150…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
I received an old AM3+ motherboard and processor with its backplate and retention brackets missing. The latter I could find here. Sadly I found no suitable backplate so I whipped out Fusion and made one. I recommend you to print with…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
Module ½-inch socket extension bar holder It holds 4 extension bars and has an 8° angle, which makes it easy to reach the extension bars. The holes are 18mm (11/16") and the extension bars usually has a diameter of 16.5mm (5/8"), so there…
Print approx. €6.27–€7.66 excl. taxPreliminary estimate for one variant
easy to print it with PLA (see attached G-Code) some support needed used some standard wood screws and some fitting washers I would advise you to choose some smaller screws than your holes are to leave room for some tolerance offset
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant
Power outlet cover to safe your kids from touching into the power outlet, easy to print, easy to place them into the power socket and also easily removable with a simple plug
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
After one too many battles with an adjustable wrench on my Tiguan’s oil filter canister, I said, 'Enough is enough!' So, I designed my own 32mm socket to fit a 1/2" drive wrench—because who has time for all that? A few tweaks later, it’s…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for PETGSource material: PET
Socket set for 3/8" drive metric sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
A basic utility/gas/meter cupboard key with a square socket. Also used on some public bins. Has a decent thickness for the grip with a thinner section on one corner for easily putting on a keyring. Print with a decent number of perimeters…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
This is a organizer for husky tools. 1x5 in gridfinity size. May work with other sockets. Dimensions are shown in attached photo. Numbers are easily colored in with paint pen. printed in .3mm layer height at 10% infill. 19mm deep.…
Print approx. €4.03–€4.93 excl. taxPreliminary estimate for one variant
A mount for generic OEM 4-socket power strip for 10 inch mini rack. Might be compatible with different styles of power strips as well. A lot cheaper than buying PDUs, which are overkill for homelab usage. Recommended print settings:…
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for PETGSource material: PET
Modeled in two parts, which slide over top of one another and lock into place to hold the processor securely within. This particular tray (I am making a series of these for the older processors in my collection) is for Intel Socket LGA775…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
Socket set for 3/8" drive imperial sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
Bought a used car with with the socket cover missing so i made this in Alibre Atom. because of car temperature in the summer i used PETG and 0.60 nozzle, 15% infill. Easy print without support. Just put it on its head in the slicer, i…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
A blanking plug for a banana socket used, for example, to prevent the insertion of measuring or connecting cables in the wrong place. There are 3 versions available according to the top surface of the cap: simple without symbols, with…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Tool/socket holder for a cardan-joint, a hex bit adapter and a expansion step tool. The tool/socket holder uses a gridfinity 1x2 bin. It's made for a cardan-joint, 1/4" to 3/8" expansion step and a 1/4" Hex bit holder. Print it with 10%…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
A handy marking out tool for UK standard size pattress boxes. These tools can be purchased from many electrical shops, but here is a convenient printable one. The spirit level is a 40mm*9mm acrylic tube level taken from a ‘string line…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
I needed a replacement cover for the TTL flash socket on my Olympus OM-4 Ti. You can find some on eBay for 10€ that look nice and are 3D printed. But I couldn't find their 3D model online, so I made my own. It's not as pretty, but it…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Printed on a Bambu X carbon, 0,12 layer height, tree support and gyroid filling.
Print approx. €4.53–€5.53 excl. taxPreliminary estimate for one variant
Socket holder gridfinity bin for phillips head no1 to no4, 1/4" drive ratchet. The socket holder uses a gridfinity 1x2 bin. It's made for phillips screw drive no1, no2, no3 and no4. Print it with 10% gyroid infill, no support. You can…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Small quick-print socket wrench with finger-sized handle for 3/8" sockets. Square block is printed horizontally so that it is less likely to shear along layer lines. If printing for print head nozzle work, use filament with a higher…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Gridfinity bin socket torx key holder Supports torx keys size TX45, TX40, TX30, TX25 and TX20 The torx key including socket is 126mm (4 15/16") long and the socket ⌀ is ~17.5mm (11/16"). Used with 3/8" drive ratchet. The socket holder…
Print approx. €5.31–€6.49 excl. taxPreliminary estimate for one variant
This 3D Print is Cover for 230v AC Indian Socket to protect kids from getting electrical shock by accident.
Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant
Led candles for E14 socket použitá žárovka : https://www.moebelix.cz/p/led-zarovka-c80412mm-e14-0-5-watt-008227074502 Print instructions Category: Decor Summary Led candles for E14 socket Print Settings Printer: Prusa MINI Rafts: No…
Print approx. €4.63–€5.66 excl. taxPreliminary estimate for one variant
Holder for ratchet wrench(gola, 1/4", 153mm of length) and set of sockets (5-12mm) Mounted to HSW with 3 M3 inserts with nuts and M3x10 screws. For the top most M3 screw I used low profile half round head. For the other two, the shape of…
Print approx. €6.31–€7.71 excl. taxPreliminary estimate for PETGSource material: PET
Give your phone some time to rest and recharge. Story Ever since I saw ThePhonePillow by HpInvent, I wanted to remix it into a wireless charging pillow. Alas, HpInvent's is using a very restrictive closed license, so I would not have been…
Print approx. €8.97–€10.96 excl. taxPreliminary estimate for PETGSource material: PET
This is an easy-to-print thumb screw attachment for a M3 socket head screw. It increases the grip area and makes it easier to turn. Also converts things into fidget toys. It's designed to be a bit tight when it goes on the screw. Printing…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
The 4-in-1 wooden train storage box has four functions in one. It can be used … … to store wooden trains clean and safely, also for transport. … as display socket. … as bridge … as advanced track with dual “polarity” There are two tracks…
Print approx. €6.21–€7.59 excl. taxPreliminary estimate for one variant
Just to keep them together.
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
i needed an electrical socket outside but an low profile one so i cut an hole in the wall and placed one there for my optimate 4 battery charger. Because its out in the open i made this covers to protect it for direct rain. I use an…
Print approx. €2.49–€3.05 excl. taxPreliminary estimate for PETGSource material: PET
After removing a bunch of keys I didn't like how it left the hotswap sockets open and all exposed. Whipped up this quick and simple model, which I'm very pleased with. I suppose it really comes down to how well your printer is calibrated.…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Adapter plate that can be used with the E27 bulb socket holder from Clas Ohlson: https://www.clasohlson.com/no/Pæresokkel/p/32-3842 Dimensions of plate is approx 58 x 88 mm. Diameter 40 mm and screw holes 4 mm.
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
This triple single power socket adapter is for mounting it onto a wooden background of a closet were there is no room to insert your power socket flat to the surface. Layer Height: 0.20 mm Material: PETG, 1.75 mm (Prusament, Signal White)…
Print approx. €8.33–€10.18 excl. taxPreliminary estimate for PETGSource material: PET
I used the original as a model and recreated it because I needed sockets in the size of 9.3mmx 9.3mm. The holder uses the hooks from the original and has space for various sockets up to a size of 22mm.
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for one variant
Socket set for 1/2" drive imperial sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Print approx. €2.58–€3.15 excl. taxPreliminary estimate for one variant
Modification as an insert for my drawer. Dimension: 155 x 95 mm Filament samples from @Nieuniknione Printed with holes down for a satin surface. No supports needed.
Print approx. €8.95–€10.94 excl. taxPreliminary estimate for PETGSource material: PET
This is built around standard outdoor North American outlets and is meantmeant to protect the outlets from excessive damage from the elements. The screw holes are 0.9cm in diameter. IfIf you have any questions or concerns, please feel…
Print approx. €7.44–€9.09 excl. taxPreliminary estimate for one variant
holder for popsocket which allows the use of magsafe accessories I used magnets from an unbranded non-functional magsafe charger
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
Hier findet Ihr ein Modell der Kunststoffbuchse für die Seitendeckel einer Vespa PK50XL aus dem Jahre 1989. Sicherlich passt diese auch bei anderen Modellen. Es gibt eine vordere und eine hintere Buchse, da die hintere Aufnahme an der…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Opravný díl ke karavanu euro mobil tištěno s MMU a materiál doporučuji ASA nebo ABS
Print approx. €4.00–€4.88 excl. taxPreliminary estimate for PETGSource material: PET
Store your charging cable safely on the wall. Just needs two screws for mounting.
Print approx. €6.81–€8.33 excl. taxPreliminary estimate for PETGSource material: PET
My son recently bought a very low time 2019 Kawasaki Z650. When we went to do the first oil change and remove the factory installed filter it was very difficult to remove( I think it was installed dry). My cheap set of cast aluminum oil…
Print approx. €3.87–€4.73 excl. taxPreliminary estimate for PETGSource material: PET
Quick Background: I purchased a 12 volt cigarette style socket from AmazonBay (?) for accessory power on my Royal Enfield Himalayan. I found a good design on thingiverse (referenced) to mount it - but I thought I could fit it a bit better…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
There is a Fusion360 file and a .STEP file so you can change it to your needs
Print approx. €5.20–€6.36 excl. taxPreliminary estimate for one variant
This is the wall cup / door frame socket / anchor (they seem to go by different names) that the child / pet gate slots into. We purchased a Northstates Toddleroo Supergate Explorer which comes with 4 wall cups and 4 self adhesive pads to…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
I've printed it in PETG with 100% infill and 3 perimeters. No need for support. As you can see in the picture, it worked well for me. It doesn't need much torque.
Print approx. €3.25–€3.98 excl. taxPreliminary estimate for PETGSource material: PET
Oil filters are only supposed to be hand tightened, so a PLA tool should be strong enough and you shouldn't need a ½" socket wrench. The main purpose of this tool is to keep the oil that remains above the filter from running down your arm…
Print approx. €3.44–€4.20 excl. taxPreliminary estimate for one variant
Using the original design (thanks to Irgendeintyp ), I turned it into a socket to repair the broken parts. In this form, the weights were reused by cutting the broken handles and trimming the edges. This saved printing time and filament…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
The Big Einsy case is an awesome concept. This remix addresses the issue of being able to easily access the frame fixing screws, especially after assembly. A channel against the frame has been opened up to route a +5V power cable up to a…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
this is a slight reworking of pltaylor's desghign theres worked for holding sockets but did not work properly with the gridininty system as once you placed any sockets in it you couldnt stack it under another module i have reworked the…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
This is a small adapter for (nominal) 9 mm square drive latches with handles or as a socket adapter. Key features: for 9 mm square drive latches e.g. used in transportation and various other applications on the other side both variants…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Holder for Draper - Socket Adaptor set . After purchasing and realising these would be loose in my work bag, I had to come up with a solution. I chose to execute using cadquery and the cq-editor . To make your own configuration see the…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
