Search results: speedometer

Speedometer ring

Outer diameter 77mm printed with transparent filament

CFmoto 450MT (IBEX) Sunshade for speedometer

A sunshade for the CFmoto 450mt speedometer, designed and 3D-printed by me, is a custom accessory created to enhance readability and reduce glare in bright sunlight. In addition to improving visibility, it offers protection against…

BMW R1150GS Speedometer Drive Gear

Replacement gear for BMW R1150GS speedometer drive - BMW RealOEM number 62122306287. There is probably no official replacement part of the plastic drive, so I took the original one and re-modeled it. Please note that dimensions of the…

Digital Bike Speedometer (Arduino)

This is a speedometer for your bicycle - powered by an Arduino Nano. It uses a linear Hall effect sensor mounted on the front shock absorber and a magnet mounted on the front wheel in order to count the revolutions of the wheels. Using…

Speedometer Clock

Speedometer Clock Inspired by analog dials of a retro motorcycle. It shows time in hours and minutes in a pair dials which resembles a tachometer and speedometer. The time is fetched from the Time Server and constantly updates it. The…

Speedometer Clock with plotted watch face

Introduction I liked the idea and the look of Oogway´s Speedometer Clock but i don´t liked the printed watch face, because i don´t get it printed nicely. So i decided to make a remix for a plotted watch face. The idea was to create a…

Speedometer cable clamp for Honda Transalp - Africa Twin / Morsetto Cavo contachilometri Applies to/Adatto per Honda Transalp XL600V and XL650V - Africa Twin 650 - 750

Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…

Sigma ROX4 Speedometer Holder

Sigma ROX4 Speedometer Holder for fix with cabel ties

KTM 790 Duke – Dashboard Cover / Speedometer Protector

This dashboard cover is designed for the KTM 790 Duke . It protects the speedometer display against scratches, dust, and direct sunlight, while providing a clean look that integrates perfectly with the bike. ✅ Compatible with KTM 790 Duke…

Piaggio Vespa PX speedometer frame

I admit that its assembly is quite complicated, but once installed it will close the hole perfectly, given that it incorporates the gasket very well. I recommend printing it with 100% infill and using support material and brim. PLA should…

Honda Rebel cmx500 Scrambler SCL500 Speedometer Surround

A surround for the Speedometer/display unit. Note: This surround / binnacle. / cowl is designed with button cut outs and from measurement of the two button digital display as fitted from model year 2020 onwards (led headlight models)…

Simson Tachogehäuse ⌀60mm | Simson speedometer housing ⌀60mm

Tachogehäuse für Simsonmopeds mit 60mm Durchmesser Tacho Speedometer housing for Simson with 60mm diameter

Sur-Ron speedometer bracket

clamp diameter: 22mm

Dashboard with speedometer and tachometer for SCARBO SVF1 Race Car Model

Dashboard with speedometer and tachometer for SCARBO SVF1 Race Car Model

Gears for PAL Speedometer odometer JAWA CZ SKODA

Replacement gears for PAL speedometer/odometer often found on old SKODA cars and JAWA and CZ motorcycles. Print in ABS. <0.4mm nozzle recommended Enjoy! Category: Replacement Parts

Bike speedometer helical gear

Bike speedometer helical gear fitted in Suzuki TS50/X/W (SA1A). the helical gear is 23R@45 and module of 0.8mm.

Royal Enfield Scram 411 speedometer top case

This lid was printed with PLA, however, i recommend using PETg or ABS cause its going to bend up when sunlight hits on it. My friend wanted it to look exactly as the original part was so he sanded it up and then did it a paint job.…

Speedometer needle

As requested by a Reddit user. Work in progress!

Satsuma Speedometer

Satsuma speedometer

Speedometer cable holder for YAMAHA XT 600

Speedometer cable holder for YAMAHA XT 600 Designed for most YAMAHA XT DT motorcycles

Classic Volkswagen Speedometer Needle (Bus, Bug, Thing etc.)

Cut the existing needle off of the black round piece and glue this on. The original needle is made from a different plastic so they should separate easily with an exacto knife. I would only suggest "VW_Bus_Speedo_needle" for abs or…

Honda Trail 90 CT90 Speedometer Gasket

A gasket for a CT90 with the D-shaped speedometer. I used TPU to print it. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Matter Hacker TPU Black Category: Automotive

Hercules Speedometer screw/ Tachoantrieb

This is a replacement speedometer screw i made for my dad. The scew is available with 7 and 8 threads. In addition I added a version with a smaler bridge and a slightly elevated bridge, whitch fits into the opposite sides hole (at least…

VW LT Speedometer pinion 281957821G

VW LT Speedometer pinion 281957821G (Z=18) Designed but never used! Print and use in car on your own risk! Also if you scale up it looks good as an ornament on a desk.

Speedometer and Tachometer for Toy Steering Wheel for Kids / Grandkids

These toy gauge dials are my own design, however, the overall gift idea is not original to me. Check out this video for a quick understanding of their intended use. SHOPPING LINKS FOR MATERIALS: Steering Wheel set of 4 —…

Bicycle speedometer magnet fixture

The problem The magnet of the electric bike of my father-in-law used to rotate on the spoke it was attached to by the default single-screw mechanism (see picture below) causing the speed controler of the motor to malfunction (for anyone…

Speedometer for Jawa

Replica of speedometer for Jawa 250 and 350 motorcycles. 120kmh and 140kmh variant.

Mercedes W201 E190 Speedometerdrive shaft part nr: 1232700027

Printed in PETG with 0.2 mm nozzle. Tested for ca 1500 km with no problems. The fit might be a bit tight and require some sanding on the axle, depending on the printer.

Bracket for motorcycle speedometer

I purchased this speedometer from Aliexpress, though I could see that the mounting points were the same for a dozen generic models of motorcycle speedometers. The bracket it came with wouldn't work in the spot I wanted to mount it, needed…

Smart Fortwo Speedometer - Clock

Smart Fortwo Speedometer - Clock Category: Automotive

Speedometer Cover for Simson

This is a used speedometer cover designed for a forty-year-old Simson motorcycle. It provides protection and housing for the speedometer, ensuring its durability and functionality while adding a vintage touch to your bike.

Honda Hornet speedometer joint

Tachometer/speedometer housing

I made a groove for putting in a o-ring under the glass. And the top-lid is pressed on and is putting pressure on the glass and oring. There is also a groove underneath the body, and the plan was to print a gasket in TPU, but the TPU a…

GPS Bicycle Computer w/ ESP32, Speedometer, SD Logging

ESP32 (Arduino) Based Bicycle Computer with GPS and SD logging This is still work in progress but mostly functional this far. The code and mechanical aspects of the project definitely work well enough for a daily usage scenario.…

Tachoantrieb / speedometer / tachometer Honda cbx 550 pc04 bj 1984

Initial Try, no long term proof jet Dimension: Gear - see picture. Outer Dimensions reduced by 0.2mm Fin - outer length 15mm, height 6mm Zylinder (without gear and fin) - inner diameter 25.1mm , outer 29.6mm, 8.3mm I printed it with PLA…

Jeep CJ speedometer bulb diffuser

Small cover to diffuse light from the bulbs. The originals were melted. I've included the Fusion 360 file in case you want to modify it. See the video below for more info.

Z750 S 2004-2006 speedometer cap

You will need to glue it or use double sided tape

Puch Dakota (VZ50) Speedometer drive gear

Should be printed with PC and 0.25 nozzle, i used 5 perimeter and gyroid infill. The module for the gear is 0.8 and it has 21 teeth.

Speedometer/tachometer shader For Honda CL500

I neede some simple and decent looking cover to provide shade for speedometer on my Honda CL500, so I made this. It can be tightented by self tapping screw, but I tested it without it and it holds firmly even in higher speeds. Printet…

Motorcycle Speedometer Bracket

Bracket I made in Blender because my speedometer didn't come with one. Test print with SUNLU PLA meta. Creality Ender 3 v3 SE. 0.16mm layer height. 0.4mm nozzle. Bed temp set at 65 and nozzle at 190, 80% print speed. 2x skirt loops and…

CRF250x CRF450x Speedometer Gear

Print at 100% infill. May need supports.

Mini R56 Speedometer Bracket

Clips onto the bottom lip of the speedometer on an R56 mini. Phone charger can be stuck to it. Made for car with satnav, may work without.

Brake Hose and Speedometer Cable Clip

My original clips disappeared so long ago that I don't even remember what they look like. This clip was modeled to look somewhat similar to other clips on the bike. Only tested on my 2009 Triumph America, but likely works on other…

Arduino Bike Computer (speedometer + odometer)

This is the case for an Arduino speedometer I made with random stuff I had laying around during quarantine last year. It assumes the tire size is a standard road bike tire on a standard road bike wheel. The code can be edited to specify a…

drz400 motorcycle veypor speedometer mount and switch housing toggle switch

this can hold a veypor and two toggle switches. good for heated grips and heated seat switches you need some m6 nylock nuts and some m6 bolts, cant remember the size this fits right between the handle bar clamps on my drz400E. Category:…

Koso EX-02 universal speedometer mount for a Yamaha TW200 Trailway

This mount was specifically designed for a Koso EX-02 universal speedometer to fit onto a Yamaha TW200 Trailway. The challenge was getting the shape of the Koso speedometer to fit into the opening. It took a number of iterations but this…

Yamaha Jog SA-12 Speedometer Gear (16T Helical Gear)

Yamaha Jog SA-12 Speedometer Gear (16T) Replacement speedometer helical gear for Yamaha Jog SA-12. Designed for high durability and a precise fit. Successfully tested in real-world conditions after being printed with Nylon. Technical…

MZ Dashboard Lite - Free Sim Racing Speedometer

MZ Dashboard Lite is a free DIY Sim Racing dashboard featuring a real moving speedometer, fuel warning indicator, and shift light support. Designed for SimHub and Arduino Nano, this compact dashboard is easy to build, inexpensive, and…

Ninja 250 GPS speedometer handlebar mount - 52mm

The speedometer on my bike wasn't working so I ordered a GPS speedometer from Amazon . The GPS speedometer requires a 52mm circular opening, so I designed this bracket to attach to the top of my handlebars. I discovered the display isn't…

Attachment for speedometer speed sensor (FreeCAD)

The original mount for the speed sensor of my Sigma BC 14.16 STS CAD speedometer has a very small joint. While being mounted on the front suspension strut of my velomobile, it broke… The replacement sensor is now glued onto my new holder.…

Time Wise 825 Speedometer generic mount

Created a mount for the Timewise 825 speedometer. Print solid in high temp plastic like ABS since it may be in the sunlight. Top pivots on a 1/8 inch shaft. The knob rotates on a 1/4 inch shaft that is tapped almost all the way through…

Speedometer Phone Holder

Phone Holder for MiniCooper F55. Found in the Thingiverse, but now is no longer available. Useful to recicle old magnetic phone holders. Two pieces that bolted to the speedo meter, let the phone in a comfortable place to use navigation…

Husqvarna 401/701 Speedometer Backcover

Husqvarna 401/701 Speedometer Backcover

Speedometer Gauge Panel for Honda CB550 with 99-02' R6 Forks

This a speedo mount to fit on a an R6 Forks. I believe this would fit on a R1 and similar years too. The boss for the ignition key has been cut off to fit this. This fits a 85mm or 3 3/8" Gauge, the one I specifically have is a “Motor…

Honda CBR speedometer gear cap

This is a cap for Honda CBR speedometer gear. Designed for CBR600F2, but i think that same gear is used on other Hondas too. This may come handy when using an aftermarket speedometer and speedometer cable is removed. Print Settings…

Tomos Custom Speedometer

Nozzle - 205C° Bed - 50C° Infill 25%

Honda CL500 Speedometer

Move the speedometer to the handlebars to free space for a screen in it's original placement. I also have the 3D print model for the screen mount. I used PETG, which seems to do the job.

KTM 690 Speedometer Relocation - Highway Dirt Bikes Handguards

I installed HDB handguards on my 2019 690, and it caused interference between the front brake lines and where my speedo was mounted on the Lynx fairing dash. The first part is a bracket (print x2) that bolts onto the HDB handguard bar…

Спидометр ГАЗ 33096, 33083 871.3802010-10 (Автоприбор) | Speedometer GAZ 33096, 33083 871.3802010-10 (Avtopribor)

Колпачок для спидометра ГАЗ, Cap for GAZ speedometer

Sigma speedometer console for velomobiles (FreeCAD)

console for the mount of a Sigma BC 14.0 speedometer you may change the angle within Sketch001

Ruima/Speedway 4 Mini Pro Speedometer Mount

In case you break it- I created a mount for attaching a speedometer/throttle to an electric scooter Ruima/Speedway 4 Mini Pro. I hope you find it useful.

Custom Yamaha XT225 Dash for Aftermarket Speedometer / RPM / USB port TW200?

About See what it looks like here: https://www.youtube.com/shorts/_z8Omeqew1A NOTE: YOU NEED TO BE COMFORTABLE WITH WIRING AND MODIFYING YOUR ELECTRICAL SYSTEM FOR THIS MOD. I AM NOT RESPONSIBLE IF IT GOES WRONG FOR YOU OR YOU RUIN YOUR…

Speedometer drive gear - Kymco Agility City 125

My Kymco's speedometer stopped working - it was caused by worn gear, originally made from Nylon or some other plastic. I tried to re-model it and print it with PETG - It works for more than 3 years without any failure! Although its made…

holder for bicycle speedometer

The speedometer I bought had a too big distance to the magnet and therefore didn't work sometimes. I designed a tool to fix that problem. If your bicycle has slightly other dimensions, adapt it in the first sketch of the f3d - file. I…

Honda NSR speedometer repair

part for speedometer repair on Honda NSR 125r

Motorcycle Speedometer

Gorgeous Cafe Racer Modified Dashboard, outer case,

Polaris Sportsmann 500 speedometer delete

Speedometer cap replacement for Polaris (sportsmann 2006). The speedos on these are known to fail so instead of buying a new speedo you can just print a cap to keep water out. Made it possible to zip-tie loose cables to the backside of…

Motorcycle Speedometer / Tach Desktop Clock

I engine-swapped my KZ200 and the new engine doesn't have a cable tach output, so I pulled the tach apart to make a clock. A lot of 70s and 80s Japanese motorcycles use Nippon Seiki instruments, and of those a lot are the same size. If…

Speedometer

This is the enclosure for an open source speedometer for motorcycles that I am working on. The speedometer uses a 20x4 hd44780 character LCD for a display, and is powered by an Arduino nano. Various other small breakout boards make up the…

BMW K1300 Speedometer mask

Printed in ASA. This will clip to the oem speedo by sliding.

Speedometer for Pedal Car

Speedometer for pedal car or another toy. Designed to fasten to car with a zip tie.

12mm Ball Bearing Speedometer

Ball Bearing Speedometer frame. Needs two photodiodes, two LEDs (Amazon sells packs with both of these), an Arduino or similar microcontroller, two 10M resistors, and two 220 ohm resistors. The frame should print with no supports,…

Volvo 240 Speedometer Clip

This is for the little clip that holds the speedo cable to the back of the instrument cluster. The original clip is very brittle. All that is needed is four m3 size bolts to secure the halves together.

Bontrager Elite Speedometer holder

Bontrager Elite Speedometer holder to be used in bicycle frame

GPS Speedometer with RP2040-Zero

This project turns an RP2040-Zero into a feature-rich GPS speedometer and trip computer. It tracks speed, distance, time, and location data Check the full project on PCBWay!…

Harley-Davidson Speedometer Button

OEM 67215-89 fits all Softail Models 90-95: Standard FXST 90 Custom FXSTC 90-95 Heritage FLST 90 Heritage FLSTC 90-95 Heritage FLSTN 93-95 Fat Boy FLSTF 90-95 Bad Boy FXSTSB 95 Springer FXSTS 90-95

Hedgehog IOT: Speedometer, odometer, mealworm reward dispenser, food scale, and environment tracker

Purpose: Track hedgehog health/activity and reward him for running with mealworms. Disclaimer: Mealworms have unfavorable Ca:P ratios so either feed calcium gut-loaded mealworms or other treats that are good for their health How: Wireless…

Arduino Digital Speedometer for Razor A5 Lux Kick Scooter AKA Zvezdalet

Arduino Digital Speedometer for Razor A5 Lux Kick Scooter Transform your kid's Razor A5 Lux Kick Scooter into a high-tech ride with this Arduino-based digital speedometer! This project combines a classic analog speedometer display with…

Speedometer Cable adapter for Honda CM125

Replaces the original Spedometer adapter at the wheelbase. Printed in PETG-CF 0,2mm Layer height. Glued in the Original Bowden cable into this new adapter, worked flawlessly so far. Added in the stepfile for easy adjustment.

Holder for speedometer

Decathlon Rockrider 520 + tachometr BC100

Smith's speedometer spare

My odo wasn't working because metal spring circlip was loose so I solve. There's 2 model one of them is just shim, because internal gauge mechanism lifts by 2mm. If odometer teeth still loose you can heat and bend clip part. I recommend…

Walfort Speedometer CR2032

Got fed up with the low battery life with the CR2016, so I made a bigger cavity in the lid to hold a CR2032 battery. Has no grove for the rubber gromit, but should still work. Print Settings Printer Brand: Creality Printer: Ender 3…

StreetScooter CDIS / Speedometer mounting clip

Note: I only have the rectangular screen CDIS, I haven't tried this for the round screen version. If you had to replace the screen on your CDIS (Central Driver Information System, the StreetScooter speedometer), you had to remove the…

Tachometerhalterung / Speedometer bracket

Untere Tachometerhalterung für E-Bike BXB-75 und vielleicht auch für andere . Das ist mein erster Versuch etwas selbständig zu kreieren , bitte seid nachsichtig mit mir . Es wurde auch nur mit Tinkercad erstellt ,da ich mich mit CAD nicht…

BMW E28 Instrument Cluster Speedometer Bushing 62121377617

This is a replacement bushing/spacer for the E28 speedometer module. Speedometer part number is 62121377617. The bushing has an ID of 6mm, OD of 9mm, and a height of 4mm. Print out of TPU.

Speedometer housing for Campers and Cars

Housing for a Speedometer based on CYD (Cheap Yellow Display) with GPS and light sensor. The code (Arduino) and further description can be found on GitHub: https://github.com/Martinus117/Speedometer_CYD I prented the housing with PC Blend…

Kettcar/Quadracycle speedometer SSD1306

This was made for a school project upgrading the quadracyle to an electric gokart

GPS Speedometer with RP2040-Zero

This project turns an RP2040-Zero into a feature-rich GPS speedometer and trip computer. It tracks speed, distance, time, and location data Check the full project on PCBWay!…

Speedometer Cable adapter for Honda CM125

Replaces the original Spedometer adapter at the wheelbase. Printed in PETG-CF 0,2mm Layer height. Glued in the Original Bowden cable into this new adapter, worked flawlessly so far. Added in the stepfile for easy adjustment.

Honda CL500 Speedometer

Move the speedometer to the handlebars to free space for a screen in it's original placement. I also have the 3D print model for the screen mount. I used PETG, which seems to do the job.

Speedometer for Pedal Car

Speedometer for pedal car or another toy. Designed to fasten to car with a zip tie.

Tachometerhalterung / Speedometer bracket

Untere Tachometerhalterung für E-Bike BXB-75 und vielleicht auch für andere . Das ist mein erster Versuch etwas selbständig zu kreieren , bitte seid nachsichtig mit mir . Es wurde auch nur mit Tinkercad erstellt ,da ich mich mit CAD nicht…

Speedometer Cable adapter for Honda CM125

Replaces the original Spedometer adapter at the wheelbase. Printed in PETG-CF 0,2mm Layer height. Glued in the Original Bowden cable into this new adapter, worked flawlessly so far. Added in the stepfile for easy adjustment.

Speedometer cable clamp for Honda Transalp - Africa Twin / Morsetto Cavo contachilometri Applies to/Adatto per Honda Transalp XL600V and XL650V - Africa Twin 650 - 750

Speedometer cable clamp Honda Transalp 650 - AfricaTwin 650/750 - Morsetto Cavo contachilometri Adatto per/Applies to Honda Transalp XL600 and XL650 - AfricaTwin RD03 and RD04 Codice parte originale/Original part number: Honda…