682 models
Okay you Sublimation Printer makers, you asked for it, you got it. :D A standard office tape dispenser is too light to use one handed. So here are a couple of spindles to use with large, heavy dispensers like this one...…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
This one is for you Sublimation Printer makers that use heat tape. The spindle for a standard tape dispenser is too small and doesn't hold the tape. This spindle is 32mm in diameter. Edit: Also see my 32 mm and 78 mm spindles with 6 mm…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
The hamster wheel for my daughters class pet was squeaky and barely held on. Since it's a very small hamster, I did not find any small enough wheels that could hold onto the cage. Hence I've designed something myself. Wheel specifications…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Turntable platter for dyi turntable project. Belt driven Designed gimble headshell and pivot for gimble join tone arm base to motor base with rubber/foam tape to isolate motor noise from tonearm base or make wooden base and use pre-made…
Print approx. €2.30–€2.82 excl. taxPreliminary estimate for PETGSource material: PET
This is a Spindlestop for a Lathe with 26mm Spindlebore. Extend it with M8 threaded Rod to the length thats needed. I added a 300mm Rod. For stabilisation you can screw one of the stops with M8 thread somewhere in the middle of the…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
Die holder for lathe tail spindle with 22mm diameter and dies with 25mm diameter.
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for one variant
This may or may not work for your stairs, it's pretty particular to my staircase. Try out the test fit print first to save your time and filament. Here is a link to the onshape document where you can edit the diameters and spaces in…
Print approx. €3.05–€3.72 excl. taxPreliminary estimate for one variant
Spindle cap for multiple makes of lawnmowers. Since this part is still available commercially, I own nothing and claim nothing and forbid commercial use. Use this as a temporary solution. Printed in PETG.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…
Untested work in progress
With this sanding spindle you can use your drill / cordless drill / drill press as a spindle sander. I used it with 80 grit paper for shaping a guitar body. I will update this with different sizes in the future. Additional parts you will…
I don't like how the spool sits on the original Spindle so I adapted my old design to work with the Stock mount and also with https://www.printables.com/model/698864-anycubic-kobra-2-max-spool-kobra-2-plus-kobra-max- This Should fit most…
This Upgrade gives you the Ultimate 3018 CNC Machine - PCB's and Aluminium can now be milled accurately. Build Steps: Remove the old X-axis rods and Z-axis carriage Loosen the vertical X-axis mounts and slide them as far rear as they'll…
This is a parameterized spindle for storing CDs / DVDs / Blurays with a screw-on top to prevent the discs falling off. It fits all the disc types listed above and has a small bump on the bottom so the bottom disc does not scratch on the…
Generic tool mount for most 52mm spindles. Print instructions 45% infill is probably more than enough, 2+ perimeters (1mm+ walls) Fits the MPCNC Primo version only. https://www.v1engineering.com/
A very quick remix of one of the parts in Tomas ' 100% Printable Clamp (Not only for Nipples! :-) to add a loop for attaching cord or chains . This is only the spindle part , so please see Tomas' original model for the other 3 parts you…
I haven't been able to get one of the Jenkins Spindles for my wife so I figured I'd design one myself. I took inspiration from their designs and from Snyder Spindles. There are three sizes of spindles. I believe the large is similar to…
Will print without supports. You might want to use a brim for the taller part.
UPDATE: added instruction video in german (sorry no english. you dont want to hear my bad english for 20 minutes :D) added a whorl in single and dual color with tighter tolerances and a corresponding press fit test. Use those when you…
Designed specifically for the "Makita RT0701C 1‑1/4 HP* Compact Router" Spindle holder is designed to work with stock lead screws, linear rods and bearings as well as anti-backlash nuts. In order to use the upgraded Z-Gantry, new lead…
Spindle with reinforced base for Yarn Spinner (Rotating Skein Holder for Crochet/Knitting) by mshipman
The Pastamatic Winder is great, but the donor spindle wasn't long enough to attach 2kg Polymaker spools. This model extends the donor spindle 1.75" to accommodate wider spools.
Use petg, abs or a similar heat resistant filament
This is a 4 part cnc router dust boot assembly designed to be used with the Makita RT0701 router spindle or similar 65mm router spindle. The main body features 12 exhaust ports to expel the spindle exhaust perpendicular to the boot and…
Ich habe diese höhenverstellbare Regalstütze entworfen, um ein durchhängendes Regal von unten abzustützen. Über die gedruckte Spindel lässt sich die Gesamthöhe zwischen 300 und 350 mm einstellen; eine Kontermutter sichert die Einstellung.…
Just a 65mm Spindle Clamp
Should fit most 55mm spindles with 57mm collars. MPCNC Primo version only. https://www.v1engineering.com/
NOTE: YOU NEED TO MIRROR THIS FOR THE 2nd SIDE. A simple holder, you can use a ¼" or 6mm steel rod or upside down end mill to hold it in your spindle and then clamp the dovetail of your test indicator to it as well. Best to position the…
When looking at the machine, make sure the fan blades are slanting from top left to bottom right as shown in the picture. There is now a shouldered version stl if you are having issues with the fan sliding up the spindle
Dieser Remix eines Modells von Hannes Weisbach LINK und das Netzteil-Gehäuse wurden während eines Twitch Streams entworfen, modelliert und aufgebaut. Das Projekt ist für die Inbetriebnahme des Sets “ER11 Chuck CNC 500 W Spindelmotor mit…
This model is compatible with the lego system.
Printable spindle container box (75x25x68mm) for Festool Systainer Organiser (such as item number 204852). Held in place using 2 pcs 5x5mm cylinder magnets. Best held in place with a small bit of glue. Make sure to align the magnet's…
12mm neodymium magnets, nut M3 DIN 562
for slim spools like the old Makerbot spools.
Pastamatic - Filament Spool Winder - Drive (spindle) Retainer Helps to prevent the drive spindle from popping out of the gears …
Back Ground I found the “Spindle Wool” by efrost on Thingiverse. It was a good model both the size of the spindle and the STL file provided were problematic. So I designed this Spindle from the ground up in Fusion 360. I made this one…
This is a little mod for the MK3s to add a 608 ball bearing per Z spindle at the top end. The Z motors need to be a few mm higher (additional length of the spindles at the top end to fit into the bearing) so there also new mounting parts…
This simple accessory mounts directly to the pen drill to protect against material projection during processing. The spindle wrench is more convenient than the supplied fork wrench for small diameter bit. Accessories designed for the PFBS…
This adapter is for the ORIGINAL donor spindle of the pastamatic. It accomodates 72mm center bore spools as pictured (mainly older Sunlu spools).
Inspired by the Abbey Bike Tools Saddle Height Bullet (part of their Fit Kit ), these tools are inserted into the end of an installed bicycle crank and allow for easy and consistent measuring of saddle height. Improvements from the Abbey…
I love this yarn spinner design but found that the spindle peg was a weak point - over time it would weaken and snap in half on me at the junction between the spindle and the base. I think it'll be much stronger if it's printed lengthwise…
This is a Turkish Spindle I designed for a friend who needed one for her weaving. It doesn't require supports. I printed it in PETG.
In addition to my revision of the drive transmission of the Y axis (see here and there ), I have also revised the holder for the spindle motor so that backlash-free T8 spindles can also be used with it. In addition, there is a cam for…
My wife really likes this model a lot but I noticed that I couldn't find it or something similar here on Printables so I wanted to reupload it. It uses a standard skateboard bearing to spin. From the original upload: Print both parts,…
Reinforced Main Drive Spindle - just as the description states. I had my original split right in the area - that I reinforced. I probably shouldn't have tightened it so much.
This is a replacement leadscrew and winder spindle for the fantastic Pastamatic. It fits the refillable Sunlu spools with a width of 50mm and a center bore of 62.7mm. Tested, works.
Pastamatic Filament Spool Winder Add-On by Kistek. This add-on is for Pastamatic filament spool winders and is meant to secure the drive spindle so that it does not come out of the cradle during operation. This is especially important for…
This remixed dust shoe is designed to work with the Inventables Spindle Carriage, P/N 80033 for the Dewalt 611. The upper dust shoe and support arms now contain slots for nuts (both square and hex). This should allow for…
This magnetic dust shoe is designed for 80mm CNC spindles . It was designed to be used with transparent PVC (>1.0mm recommended). The PVC is simply wrapped around the magnetic ring, after which the retaining ring can be press-fittet (e.g.…
This part needs no screws, it just sits on the top extrusion of the Ender 3V2 frame. It fits one ball bearing with outer diameter 24 mm and inner diameter 8 mm, for example SS-628-ZZ Print it the same orientation it will sit on the frame,…
Schleifspindel / grinding spindle Schleifspindel in den Größe: 30mm x 50mm 50mm x 50mm 80mm x 50mm Bohrung für Gewindestange: bei 30mm -> 6mm bei 50mm -> 6mm bei 80mm -> 8mm Grinding spindle in the size: 30mm x 50mm 50mm x 50mm 80mm x…
This is an upgrade for the standard cooling fan included with the 500W Spindle commonly used on small DIY CNC milling machines. It prints easily and needs no supports. There is an open and a closed version, depending on personal…
Revised Carvera Spindle Fan by Fae Corrigan. This version has slightly thicker blades plus other improvements.
A friend needed an adapter to try out a 65mm spindle in the existing 69mm spindle mount on his small CNC router, so I drew one up and printed it. Prints upside-down on the flange so you don't need any support.
Update Feb 2026 : Multiple diameters of spindle have been added. All new models have the V2 prefix. New spindles are not compatible with the old V1 base and bolt. Details: This is a smaller yarn winder spool for a generic Amazon yarn…
We had a difficult time getting the files to make a spare dust shoe, so we downloaded them from OnShape, resized them to the appropriate size (100%), and re-exported them in a ready-to-print size. They're easier to find, download, and 3D…
This a super basic 4030 Desktop CNC Router Design for 65mm Spindles, eg a Makita Router or 1.5kW Air-cooled VFD unit. I'm publishing this due to a request, however it doesnt fully match my current machine spec, and may be incomplete in…
I made this dust shoe after upgrading my Genmitsu CNC 3020 to use a Makita RT0701 trim router. I never really liked how the Genmitsu dust shoe bristles would get crushed and pusshed into the endmill during deep cuts so I decided to make…
A replacement spindle for the yarn winder, it is 120 mm long (the original one is 82.5 mm long). Helps to wind larger balls, created to prevent the slipping of yarn when the ball gets too big. For SLA/resin printing : it can be printed…
simple spindle for those of us still rockin CD's and DVD's.
Important! Before printing this, please check the spacing of your CNC X axis rods. I've added two test pieces to check the fit before printing. One for 68mm spacing and one for 72mm spacing. I didn't realise there were so many variations…
--Settings-- Layer Height - 0,1 mm Print Speed - 50 mm/s Wall Line Count - 3 No Support Build Plate Adhesion Type - Skirt or Brim
I upgraded my cheap chinese CNC with end swithes following this design: https://www.thingiverse.com/thing:2796202 But standard brush motor produces so much noise, that inputs of GRBL controller board was triggered immediatelly when motor…
TODO: The hole for the tightening screw needs to be slightly enlarged. It is barely too small for the head of the 10-24 screw. The screw will work and fit, but depending on your printer's accuracy, and material, it may split the print…
Just a toilet paper spindle in case yours broke. No Springs Needed so Its fully 3D Printable Best Printed with 0.16mm layer height or smaller When installing be sure “Spindle Female.stl” is on the right side to avoid unscrewing while…
This is a tool that fits on the bull gear of a Craftsman/Atlas lathe to assist with removal of the chuck. I measured and modeled this to fit my Craftsman/Atlas 12" lathe. It may fit other Atlas lathes. I've included the stl file of what I…
This is a remodel of my Avid CNC Dust shoe that has been modified to work with an 80mm spindle. The skirt is in two parts so you can remove the front half to do a bit change without having to remove the full skirt. I chose to use Magport…
This is a machine-battery adapter for a Parkside drill that originally used 18V Ni-Cd batteries and is now able to mount 18V Li-Ion batteries (in this case Einhell Power-X-Change). The drill works perfectly with the new batteries, even…
Dieses Teil ist zum reinigen von Trapezgewindespindeln mit 8 mm Durchmesser. Print Settings Rafts: No Supports: No **Resolution:** 0,2 Infill: 25% **Filament:** 3DJake / extrudr PLA Tough / NX2…
Dust shoe for 65mm CNC ER11 spindle with 35mm inner/41,5mm outer hose. Requiered additional parts: 1x M4x20mm Screw an one M4 nut 8x 8x2mm round magnets e.g. 70mm Dust shoe brush Print Settings Printer Brand: Creality Printer: Ender 3…
Spindle wool model for 3d print. Print instructions Middle and screw - 100% infill, 3 perimeters Top and bottom parts - 5% infill, 2 perimeters Material: PETG Note, there is a left hand thread
A remix of MarcusWolschon's spindle dust shoe; but for a spindle I have on my ShapeOko. The parts should be able to be scaled up/down to fit others. Print instructions Category: Machine Tools Instructions The parts from thing:31156 have…
Spindle holder 65mm for CNC TTC-450 PETG
Same spindle, stronger socket.
A compact magnetic dust shoe for an 80mm spindle and a 60mm vacuum hose. Materials needed: 2x M4x14 screw 2x M4 Nuts 12x 10x3mm neodymium magnets 20cm of 6mm thick brush Instructions: Glue magnets in holes in an alternating polarity…
The arms are the same length -- but spindles are pulled longer to accomodate thicker phone cases.
A classic use-case of 3D printing… a flimsy replacement injection-molded ABS part costs a fortune to source and is discontinued by the manufacturer. This is the part that links the glass plate in a microwave oven to the driving motor…
Original fan is terribly unbalanced and causes spindle vibration. With this fan its noticable quiter with minimum vibrations. I printed it from Prusament ASA. It's also lighter at about 6g from the original fan. I gained 400rpm just with…
This is a remix of the Dust Shoe by @Birbou - the main changes are as follows: Flush mounts against the bottom of the Spindle Motor to minimise Z-height loss Sweeper Section mounts Magnetically using 3x2.5mm Neodymium Magnets Less parts…
Horizontal and vertical mounts for dial indicators with 8mm shaft to be used as test indicators on a cnc machine. Can be used to tram and square axes or parts. Uses a 7mm shaft to be mounted in spindle collet. Will work with ER11 + sizes.…
CNC Dust collection head fit for a 80mm spindle on a CNC machine. Both printable TPU (or flex PLA) brush heads or with purchased bristles **** May not work in hard plastics!!! it is designed to be FLEXIBLE! 2 parts for easy access to…
Print this model and simply swap spindles instead! Works great with my Dymo LableWriter 450 Turbo. This model can also serve as "replacement parts" as they are interchangeable with the original spindle parts that come with the printer.…
Drop Spindle Ornament. Can be printed standing upright with 50degree support overhangs setting.
I created a square with 9.7 mm. Perhaps it could be made a bit tighter.
My colleague had a dispenser with no spindle in it. I borrowed one from another dispenser and reverse-engineered it, just to see it I could and if it was actually printable. This is the result. It fits, it works, problem solved. It's not…
This dust shoe is designed to fit a 500w spindle and collect the dust while your CNC is cutting. When you need to change the tool on your spindle you just push the two buttons and pop out the lower part for easy access! The buttons print…
3 separate pieces print what you need! :) SPINDLE CLAMP for 65mm trimmer (MAKITA, KATSU, CLONE etc) for CNC Twotrees TTC450 DUST SHOE for ALL 65 mm trimmer Suction ADAPTER (internal diameter 39.2 mm external diameter 43.2 mm) designed to…
Plate to attach 65 mm CNC spindle holder from Aliexpress to TTC-450 machine. Designed for holders that use 80x25 mm mounting hole distances. This plate is thick for a reason! You need a specific distance from the router to the machine so…
This lathe spindle spider fits small lathes with a rear spindle thread of M27x1.5. This includes many 7x10/12/14 inch lathe models. Assembly There are 8 holes that need to be tapped M6x1.0 (the equivalent length ¼"X20 screws should work…
Introducing the Kindle Spindle: the ultimate tool for turning your waste paper into eco-friendly fire starter logs! With this innovative device, you can recycle your old newspapers, junk mail, and cardboard boxes and turn them into…
The model is a 200 mm diameter (so it fits on your MK3 and MK4 printer) Longworth type chuck. Included models are base adapter plate, front plate with fitting ring, M5 slider nuts and M5 buffer cores. In compression it can hold bowls up…
I was sick of duck tape, plastic shims, and hose clamps. There are also poor side mounts and other contraptions, but I wanted a one-shot deal that solved that issue. This is designed to be used on the Sainsmart, or generic 3018 desktop…
15.01.2020: Updated a new version that lets the threaded rod coupler go into the spindle mount, to get full movement on the Z axis. Also made the clamping part for the spindle a little bit longer to prevent movement in the holder.…
A 65mm diameter spindle mount that replaces the original 52mm mount on the Sainsmart Genmitsu 3020 Pro Max CNC router... The new mount uses all the original hardware. It is designed primarily to be used with the Makita 700/701/702 palm…
The spindle indexer can be used to index a workpiece on a rose engine or ornamental lathe. It's used to help create a pattern on a workpiece. It has 72 positions, one every 5 degrees. The indexer's lever uses spring pressure to quickly…
The simplest tool for spinning fibers into yarns. Available in 3 sizes and designed to print well on any printer without supports. Fully tested and verified to work great by a legitimate fiber arts expert. Very popular items.
A pretty straightforward spindle, that spins. I'll also upload the non-spinning version. My print was warped because I'm using a build surface I haven't dialed-in yet, but it still works fine! Use a brim if your printer is prone to…
Edit 02.04.2021: Verstärkung des Oberteils, insbesondere im Bereich der Spindelklemmung Edit 28.11.2019: Ich habe die Absaugung aufgrund der eigenen Erfahrungen nochmals verbessert (V2): 3-teilige Konstruktion - so lassen sich die Teile…
