The source marked this model as adult content.
- Downloads
- 2,524
- Likes
- 190
- Rating
- 0
81 models
This model is suitable for a Prusa Mini, and prints easily with no supports and (almost) no infill. Printing details are at the end of this description but first: SIZE Two models are attached in Small Size (EU size 54 and up), and Large…
This design is based on a size 10 UK shoe size but can be used for smaller.
Baseball Caps Insert| Hat Shaper |Cap Liner| Ball Caps Form| Hat Stretcher I used 10% infill PETG Once done printing take the print off the build plate and start molding to the inside of your hat. The build plate is still hot so be careful.
Stretcher bars for embroidery/needlepoint canvas. Use tacks to pin the canvas around the frame like you would with wooden stretcher bars. Use four bars to make a complete frame. Features Stretcher bars from 4" to 10" (in 1" increments)…
Scale záchranářské nosítko 1/10 podle předlohy reálného nosítka. Rozměry 218x62x3
I bought a kit (yes, that kit found also on Amazon) containing plenty of ear stretchers but when I reached size 6mm I noticed that the next piece was 8mm. I created a 7mm and a 9mm stretcher. You can use the o-rings from the kit. The…
Recommend printing on side, with brim enabled, but no need for support structure. Feel free to scale it down a bit if you want.
Растяжитель для широких ботинок. @Напильники для двух размеров обуви: клиновой и соединительный. @Я использовал широкую шайбу 8 и винт с потайной головкой DIN 7991 М8х100. @И два винта М4х30 . @Есть напильник под болт М8х90 с шестигранной…
I was really interested in the Calfpro and the positive reviews it’s received. However, at over £100, it’s more than I’m willing to spend. So, after spending a couple of hours in Fusion360 and using the information I found online, I’ve…
Hat Stretcher worked great, but having the layers the same direction as the threads could case layer separation if screwed too tight. Merged the screws into one model and made it so can be printed horizontally. Worked well for me. This is…
It's based off of the String Strecha, utilises leverage to stretch in new strings on any instrument. Showing it here with some Polyurethane U-Bass strings, which are the worst when it comes to needing to settle in. I am a luthier so any…
WW1 British medical stretcher crew carrying a wounded soldier. Scale to toy soldier size. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a…
This model is compatible with the lego system.
Hat stretcher, with compliant mechanisms designed to bend outwards to put a more even force on the rim. I printed in ABS but should work in PLA
A remix of another shoe stretcher to fit a smaller turnbuckle with less slack.
This is my attempt to make a WW1-inspired French stretcher crew with a medic in the field. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a…
Use these plugs in your shoe stretcher to help areas that are tight in your shoes. Print with the plug facing up and use brim. Happy Printing!
a simple standard size stretcher key for canvas Printed on anycubic kobra plus 0.6 mm nozle 0.5 mm layer height 80mm/sec wood PLA at 195 degrees
Printed in https://shop.3dfilaprint.com/filaprint-glow-in-the-dark-green-premium-pla-175mm-3d-printer-filament-8112-p.asp On my Flashforge Adventure 4 I can only recommend 3D Printed stretchers as a one time use as it cant be guaranteed…
On the hard floor , place the stretcher behind your back , with the curved side towards you and lay over it , with the lower back on top of it . The stretcher pushes the spine back in place by puching on the muscles beside the spine .…
Stretcher for the 800 model helicopter EC145
Made it in 3 pieces . Combined it is 600mm long . Lay it on the floor , position the upperbody over it and lay down with your spine in the groove , the lowerback on the highest part of the stretcher .( maybe you can turn it around and…
If you are lucky like me and have one foot slightly larger than the other, then you probably have or need a shoe stretcher. And if you're REALLY lucky like me; you lose basically everything you acquire at one point or another. Well,…
With this jaw stretcher, you can relieve tension in the jaw muscles . Tense muscles in the jaw can cause all sorts of things: a painful jaw joint, tinnitus, facial pain, migraines and even neck and back pain. The jaw stretcher can help:…
adaptation of the Handle and Wedges to fit M8 Hardware and for better printability. Parts are already in the right Orientation fits M8x100 Bolt
I got these shoes as a gift and didn't try them on for a while. It was far too late to return them. And good golly - the were a snootch too small. No probs - I'm an evil genius. The bolt holder is threaded all the way down. I print it…
Firstly: This device is EXPERIMENTAL. As such, USE AT YOUR OWN RISK! I am NOT a doctor, this is NOT medical advice, and nothing I say should be construed as such. This device has NOT been evaluated and/or approved by any medical science…
WWI-inspired American Stretcher Crew. Designed as a toy soldier. You may need to resize this model to fit your needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to…
I always wonder why they make narrow shoes. Are there people who don't have big toes on their feet? I've bought a shoe-stretcher to widen space for the big toes, but it also has non-anatomic shape (the left and the right foot is the…
these are 70MM ear stretchers. Category: Earrings
This knitted quilt square stretcher allows individual quilt squares to be stretched and flattened out before knitting together for a whole quilt. I've created 2 versions intended for 5mm- and 1/4in-diameter dowel rods. Rotate the…
This is a simple and stable wall mount for wooden stretcher frame pictures. The thickness of the stretcher and the size of the wall mount can be adjusted via the parameters in Fusion 360. The mounting can be done either with double-sided…
Hi everyone, this is my Construction of an universal filament roll stretcher. You can use it to fix every normal filament spool with holediameter from 50 up to 90 mm. It was a lot of work so pls show me if you like it and press the like…
Printed with Extrudr TPU Semisoft. 15% gyroid infill, 3 walls and 4 top and bottom shell layers. You can reduce the wall layers if you want to make it more stretchy. NOTE: it is designed for freeride skies so you maybe have to make a bit…
This is a 21mm ear stretching plug, single flare with a radiation logo
Plate for streching granny squares
This is a 21mm ear stretching plug, single flare with a biohazard pattern
This is a grannysquare stretcher to adjust the elastic form of grannysquares to make it easier to assemble the squares into e.g. a blanket. Put the pins through the knitted/crocheted square and leave it for a few hours to let it set.
Ear Stretcher earring available in 20mm and 28mm Used PLA but I'm sure it would work with other filaments. I added a brim as it kept unsticking itself from the build plate but that may be because my build plate is getting old. Happy…
This is a wall mount for LED pucks with a diameter of 79mm. PETG or PLA etc. with 0.4mm nozzle and 0.2mm layer height, infill 15% We wanted to use the wonderful designer Lithophane Moon Lamp by Frank Deschner…
Printed with PETG. Will work with other types of piezoelectric actuators longer than 20mm. Uses IGUS DryLin railing.
It’s a small print that stretches your hair ties that are to tight. Looks nicely and is easy to print without supports. It has a little gap to grab the hair ties. Can hold up to 10 hair ties and the radius gets a bit smaller upwards the…
I needed a way, to stretch a chain that is screwed between the wall and a wooden board. Insert the chain in the bore
Slightly shortened middle joining section, fits Peter H's LARGE size hat stretcher
This practical and easy-to-print upholstery webbing stretcher simplifies upholstery projects by helping you stretch webbing securely and evenly. Perfect for DIY furniture restoration and upholstery tasks, it ensures consistent tension and…
Use to stretch calves. Turn on the side to massage your foot arch. After printing, glue the two pieces together. No Supports, Increase # of Walls, 10% infill should probably be enough Category: Sport & Outdoors
Tool that helps ballpark the tension for adjusting shifting/braking. Under development. May not work yet. How I Designed This Source image Based on the Park Tool BT-2 tool. Took measurements & guessed others. Assembly You'll need to print…
My blue mountain stretcher plastic inserts disintegrated. So 3d printer to the rescue, all parts were made with ABS.
CZ: Jednoduchý 3D model určený k roztahování prstových ponožek po praní a sušení. Pokud se vám ponožky sráží a špatně oblékají, toto kopyto je ideální řešení. Stačí natáhnout ponožku na model, nechat chvíli "odpočinout" a opět se snadno…
I recently bought a new helmet, but the cheek pads felt a bit too tight. To solve this, I designed and 3D printed this tool to gently stretch them and make the fit more comfortable. Optional Files These are not required, but they might be…
A merged version of the hat stretcher screw. Easier printing and stronger. Print with some strength in mind. Gyro infill 25%
DE: Hatte mit den Schuhspannern eine Klammer bekommen, die aber auf Reisen immer wieder verloren gagangen ist. Daher habe ich einen Ersatz konstruiert. Material: PLA / PETG Schichten: 0.2mm Stützen: nein EN: I had bought a clip together…
Just a little bracket to fasten a round cross piece to a rectangular cross-section stretcher under an antique bench.
Used on wet denim several times now. 50% infil holding up but would use more on a re-do. Would also use Peter H's screw design for easier operation.
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 15hours with recommended settings and 0.6mm nozzle. Slicer settings: 0.32mm layer height, 5-6 perimeters Post processing instructions: Print 3 pcs…
There used to be a time when socks were made to specific sizes, so that one could choose them accordingly and solve other, more important problems in life. Nowadays the product lines have become "leaner" with socks coming in regimes…
Calf stretcher with rubber feet and m12 weightsCalf stretcher with rubber feet and m12 weights
Foot Pad for distributing pressure when using Camping Stretcher in soft soil or sand. Fits over 30x30mm generic plastic ends. Printed in PLA or ABS 3-4 permimiters 25-40% infill. Print standing upright on a flat end.
Needed to add additional stretchers to the sons Ivar wardrobe and thought to re-use as much of the furnitures existing options. Print two holders and either use pegs from IKEA or print the ones I added here, each holder require four pegs.…
This is a very simple design and was copied/adapted from the original parts that were on my living room curtains (thin ones). One day, we removed the curtains to wash and found that the parts were all broken, probably due to poor…
Suitable for Philips humidifier HU5710 / Filter part number: FY5030 A part to stretch the filter back to normal size. My filter shrunk in size after cleaning (possibly too much). Currently the replacement filter are out of stock, so it is…
Description : I got tired of not being able to use the 3rd party mega missiles I bought for blasters like the Demolisher 2-in-1 and Fortnite GL, because they were too tight around the post. To fix that, I created these stretchers to leave…
For stretching out a watch band for ultrasonic cleaning
I specifically designed this for the King Goanna Stretcher. It was to stop the standard foot from tearing through the floor of my tent. I made it with TPU 95 to give it some flex.
KDxGP STRECHR.SPL Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you! STRECHR.SPL comes in two different heights: 15mm and…
I always wonder why they make narrow shoes. Are there people who don't have big toes on their feet? I've bought a shoe-stretcher to widen space for the big toes, but it also has non-anatomic shape (the left and the right foot is the…
Stretcher bars for embroidery/needlepoint canvas. Use tacks to pin the canvas around the frame like you would with wooden stretcher bars. Use four bars to make a complete frame. Features Stretcher bars from 4" to 10" (in 1" increments)…
Needed to add additional stretchers to the sons Ivar wardrobe and thought to re-use as much of the furnitures existing options. Print two holders and either use pegs from IKEA or print the ones I added here, each holder require four pegs.…
WW1 British medical stretcher crew carrying a wounded soldier. Scale to toy soldier size. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a…
KDxGP STRECHR Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you! STRECHR is a stackable ball stretcher design you can print…