2,035 models
With these holders, the wall of a mini photo studio flows smoothly to the bottom. Suitable for A4 to A0 paper, thin cardboard. The left and right holder are the same. 1 screen holder is 17 cm high, 17 cm wide and 2 cm thick, making it…
Print approx. €6.97–€8.52 excl. taxPreliminary estimate for one variant
A functional study model of an intriguing wrist joint as seen in a brief Hackaday article about a dextrous robotic arm from Korea. https://hackaday.com/2019/10/20/humanoid-robot-has-joints-that-inspire/ I printed it in three colors for…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
This is a simple drywall stud finder. It uses a strong neodymium magnet to detect drywall screws which indicates possible stud locations. Move the stud finder across the wall until the center indicator starts to rattle and snaps in place,…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Slice your books for different color covers and pages as desired or use the included gcode files. Books with pegs for holding and books without pegs are included. Update: Radii added for stress relief on books with pegs and binders for…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Obviously I don't own the LEGO ® brand, and the fact that this fits their bricks doesn't mean they support this model. Go buy their products if you want quality, this is just an homage to their brand, not a LEGO ® supported product. I…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
The xBloom Studio has a groove on top that allows for holding a phone. I found that it didn't quite hold my case-less iPhone securely enough. The phone would frequently slip out and fall flat, especially when using the grinder. This phone…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Akai Professional Fire Stand (a snap on stand for the FL Studio hardware controller by Akai). Connect one side of the stand (Front or rear) to the Fire and then lightly pull and snap the opposite side into place. Originally printed using…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for PETGSource material: PET
A Privacy Shield/Cap/Cover for Microsoft LifeCam Studio. I used Prusament Galaxy Black PLA and it fits perfect on the Webcam. Additional Parts 2x M2.5 x 5mm Button Head Screws Links The links to AliExpress are advertising links. I would…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Lego door know bor little closets, the design is made with a 4.3mm hole 5mm deep made to use some heated inserts for M3 screws, these are the inserts i used Amazon , but really any one will work as far as the hole diameter is a little bit…
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for one variant
This project includes all files necessary to reproduce Plate 1 of the TaTaBook "Geology". To download the corresponding audio files visit the SOML website under: http://link.socialmicrolearning.com/XmWKdw Designed by Trnka, n.o:…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
Mount for the Zircon StudSensor L50 compatible with IKEA Skadis pegboards. Would like to do a v2 with rounded lower corners, but this is functional.
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
Simple magnetic stud finder uses a round 10mm by 3mm thick magnet. Printed in PLA with 5% infill. A magnet of 10mm diameter and 3mm thick will push in tightly with some force to the bottom of this. If its to loose then add some super glue…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
I needed a set of spool holders for a tight space, even less than is available on Ikea Lack table. I also wanted a spool holder that's easy to operate, screwable to the desk and won't waste even a mm of space. So how it works? You can…
Print approx. €2.86–€3.50 excl. taxPreliminary estimate for PETGSource material: PET
This is my failed attempt making XIAO BLE as a Slime VR tracker. I popped a regulator and thought I should move on with a custom PCB. However, I want this as a stepping stone for future design of other wearable devices using the same…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Gridfinity Holder tailored for Tonic Studios Tim Holtz Non-Stick Micro Serrated Mini Snips. This holder provides a snug home for your essential crafting tool. Contains magnet holes on the bottom and can be stacked.
Print approx. €12.33–€15.08 excl. taxPreliminary estimate for one variant
Printed on a XL, but could be divided into two parts and be printed separately. I sliced it with 0.15mm. I glued the strips on the laptop with strong double sided sticker tape (for phone screens).
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
A 3/8" drive designed special socket for removing VW, Audi, SEAT, Skoda airbox studs, as a standard bi-hexagon socket does not accommodate the stud head. Printing Information. 0.20mm (QUALITY) layer height. 25% infill. 2mm shell thickness…
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
This device gives the approximate center location of a standard wall stud by locating the dry wall screws in the board. Large grip for comfort and ease of use. I used these these magnets (quite strong) to get the best results. Smaller…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET
I've been using the Seeed Studio ATX PSU breakout board for a while now and nearly had an incident by leaving the board floating around the desk with lots of metal bits around. I decided to make a simple cover for the bottom to prevent…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
This project includes all files necessary to reproduce Plate 7 of the TaTaBook "Orientation and Mobility". To download the corresponding audio files visit the SOML website under: http://link.socialmicrolearning.com/FEFoew Designed by…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
This project includes all files necessary to reproduce Plate 2 of the TaTaBook "Orientation and Mobility". To download the corresponding audio files visit the SOML website under: http://link.socialmicrolearning.com/kMS8-A Designed by…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Built in camera of display is not covered. I used the slicer to make an additional slot for buttons on the left side of the phone. See images.
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
Reportážní/studiová kamera na stativu v měřítku 1/10. Slouží jako doplněk třeba k RC závodům. Model je rozdělen na tři díly (kamera, spojka, 3x noha) nohy se přidělávají šrouby M3*9mm. Kamera a spojka mají spoj určený k lepení.
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant
Organize your workspace in style with this minimalist pen stand, designed for quick and easy 3D printing. Printed in vase mode on an Ender 3 in just 45 minutes, this design is perfect for anyone who wants a fast, functional, and…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
CZ: (EN version follows) Do školy jsme koupili sadu Vernier - Aparatura pro studium rotačního pohybu (GDX-CFA) . K dokonalosti jí chyběla možnost někam uložit nepoužívaná závaží. Trojúhelníková základna obsahuje předvrtané otvory, které…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
The screws had broken the original holes on the CPU fan of a Dell Studio XPS 9100, and the computer kept shutting down hard due to overheating. After printing these and installing them, along with some fresh thermal paste, the computer…
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for PETGSource material: PET
Working with PETG on a Bambu X1, I needed a temperature tower with G-code to work in Bambu Studio. The general PETG presets work, but I want to explore faster prints. This temperature tower originates from the work of Tronnic and Kryštof…
Another photo studio! There are quite a few of these online, however most are tailored to smaller backgrounds, normally A3 paper sized. When I photograph my props or larger items, I quickly find the limitations. Available now is a…
OrcaSlicer (Bambu Studio SoftFever) Profiles for X1 Carbon These are my tweaked/tuned profiles for the X1 Carbon. They are not designed for Bambu P1P printer but may work on it as well, use at own risk. UPDATE LOG CAN BE FOUND ON THE…
CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…
I designed an accurately sized 1x1 Lego stud and then blew it up to 6x the normal size to use them as wall hooks. There are two versions: Stud with threads to match the mounting stud Stud with no thread that can fit over an equally scaled…
All that photo stands I saw was missing one thing - strength. They fell apart easily. Others were to bulky to print. So, I made my own. This stand provides a sweep, or curved, seamless background for photographing small to medium sized…
This is a Temperature project for PETG with temperatures starting at 220 to 265. Just open the project, insert the filament, and print. The temperatures will change automatically.
Modified model and g-code to work with PLA Silk 195c to 235c
All that photo stands I saw was missing one thing - strength. They fell apart easily. Others were to bulky to print. So, I made my own . And then I found that design could be improved. This stand provides a sweep, or curved, seamless…
NOTE: this interface was designed to suit the studioform BSB X1 foam interfaces/the original V1 studioform dream air interfaces (which were the same thing). If you want to use the newer v2 studioform interface they are notably larger and…
A physical reference tool for students learning CAD and 3D printing. It helps turn dimensions on a screen into something you can actually see and touch. Includes: 200 mm ruler Hole diameters Wall thickness Gap / slot width Text sizes…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
xBloom Studio storage for xBloom Filters, omni dripper 2, and xPod Dock. I was looking for a compact storage solution for all my xBloom attachments. I wanted it to be able to mount to the machine itself as I was using a rolling base and…
I designed this stand to elevate my desktop monitors and hold them at the right angle for better tweeter performance. This design is now on the V2 revision which keeps the minimalist vibe but fixes some issues and adds some new features:…
Remixed the stud from this awesome model for a giant lego wreath (you'll need the leaves): https://www.printables.com/model/58424-giant-lego-wreath-no-supports-needed Wanted a logo to make it look more like a giant version of the real…
WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the PETG versions of the case) which has…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO ESP32C3, an Arduino & CircuitPython capable RISC-V board with Wi-Fi, Bluetooth and USB-C that comes with an antenna and costs $4.99. The product page for this device can be…
Temperature tower for ABS/ASA filaments going from 230 - 270 degrees celsius. The machine code is added to the printer profile with a suffix of TempChange. If you'd like to modify the text, you can add a new text shape with a font of…
This is a Temperature project for PLA with temperatures starting at 235 to 195. Just open the project, insert the filament, and print. The temperatures will change automatically.
Star Trek Enterprise D 4 foot studio replica scale model, hollowed out for room for an internal structure, lighting effects. Interior framework still needs a bit of work.
Update 1.3: Tightened tolerances on stud shaft and hex head close to v1.1-1.0. Threads almost like 1.2. RackStuds - a strong™ threaded fastener. This two-part design aims to make 3D printed mini-racks a lot more fun and accessible by…
This model is compatible with the lego system.
This is a simple case for the Seeed Studio XIAO-ESP32-S3. It has an option with an extra plank that you can stick the external antenna onto. The lid snaps on without any screws or glue. This is an initial model for basically the device…
Original part : https://www.thingiverse.com/thing:5212231/files
Seeed Studio XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and…
This is an OpenSCAD library to generate an ergonomic handle that distributes hand contact pressure as evenly as possible, for any size of hand. The dimensions in this model are based on several research papers using anthropometric data…
As a follow-up on my temperature-tower and Acceleration-tower for Bambu Studio, I created this Speed-tower. Its width is designed to fit in a 1x2 gridfinity basket. First model is a test from 40mms to 220ms. Second model is from 160mms to…
Change log 2025/01/01 Added STEP and Fusion 360 source files. 2025/12/08 Added v10, only change is 5mm taller walls NOT for commercial use, if you want to sell these please get in touch. The charging cradle/puck prints with no supports…
Settings see pictures, all other settings to default. Thanks for downloading in advance and please don't forget to like this modell!
This model is compatible with the lego system.
This model is compatible with the lego system.
If you need to buy the tracker: Seeed Studio SenseCAP Card Tracker T1000-E Make sure to use coupon code B737HUW8 for 10% off. Commercial Use and Attribution Notice: Alley Chat T1000 Holster © 2024 by Alley Cat and Majestic AV, LLC. is…
The Beats Studio 3 headband commonly breaks where it meets the folding articulation. Mine were not spared. May also work for other Beats Studio, Studio 2 and Studio Pro. This was only tested on the Beats Studio 3, for which it is a…
This model is compatible with the lego system.
After printing the wreath at 200%, I noticed that the connections were a little bit more loose than I would like. So, I designed some locking studs that can be used to lock the wreath parts together - while still allowing you to take them…
The three models are for the Toolgrid system. Ones I found online were not at the tolerance I preferred so I made these. They are .254mm smaller than the actual size keeping it nice and tight to the socket but not tight enough you can't…
Material used: One 40MM Mini Audio Portable Speakers, like a this one . 3x M2x20 screw, 3 feet made of 3mm rubber (see photo). ReSpeaker XVF3800 from SeeedStudio: https://www.seeedstudio.com/ReSpeaker-XVF3800-USB-Mic-Array-p-6488.html…
This is the Pusi Negotiator . An unofficially designed negotiator for wave filters to be used on the xBloom Studio Omni Dripper 2. Brewing note: I recommend either this recipe designed by @pradyboy for Moodtrap beans, for use with this…
YOU MAY LIKE: MODEL HERE: https://cults3d.com/:2232125 Thanks for your support.
This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…
Inspired by GSmith 's Mac Studio Under Desk Mount . Made the mount for my M1 Mac Studio (2022), but as far I know the M2 (2023) has the exact same dimensions and therefore should fit too. The distance between the holes (left/right) is…
Vase designed originally for the Flower Bouquet #10280. The added studs fit perfectly to normal lego bricks. The hole on the downside is for put in weight, it is made for 7x M10 Nuts. Settings: 4 Wall Lines 4 Bottom/Top Lines Infill: 20%…
https://github.com/DRIgnazGortngschirl/bambulab-studio-orca-slicer-presets Welcome to the Bambu Studio / Orca Slicer Presets repository! This repository is dedicated to storing / collecting presets that have been meticulously crafted and…
This model is compatible with the lego system.
Her name is Ponyo. She likes to eat ham. And she can do magic! Ponyo is a character from a Studio Ghibli movie . The movie tells the story of a goldfish-like creature that turns into a little girl :) Printing Advice Ponyo and bucket print…
Snap-fit case for Seeed Studio XIAO ESP32S3 UPDATE: Added STEP file for the model for future improvements and modifications by the community. Please respect the CC Attribution Non-Commercial license. Features: Snap-fit case, no additional…
This model is compatible with the lego system.
Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html Print Settings: PETG 0.2mm layer 4 walls 15% infill add support on everything…
Modified model and g-code to work with PLA Silk 210c to 250c
Open the corresponding 3mf file with "Open project...", select your filament and nozzle, use 0.2mm layer height, slice it and switch to the temperature tab. Check that there are multiple temperatures. --> Print and have a look at the…
01/12/23, Added Updated .3mf. Bambu Studio settings tuned for eSUN PLA+ After loading the .3mf there is setting changes in all 3 sections which interact to produce the end result. If you just use the comparison charts to make your own…
Profile for Sainsmart TPU that I use mainly for fpv drones. My Bambulab P1P has hardened steel nozzle and gears and aux part cooling fan. Is usable on all Bambulab printers though. I've printed a lot of colors and models. Enjoy :)
This model is compatible with the lego system.
Seeed Studio XIAO ESP32S3 Sense leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB…
For all kinds of sheets. Also thicker ones.
I wanted a simple solution for a photo studio lightbox that could be stored with minimal space. Had the idea of using 3mm K-Line sheets and printing some parts to keep them together in a square. Printing All the pieces were printed in…
I love the original Lego wreath but I wanted a star to top it off, so I went into Tinkercard and made one. I imported a stud object and using Tinkercad I added a star with a 5mm thickness to the stud. I then imported the STL into…
I'll be honest: printing oversized Lego bricks is the main reason I got into 3D printing. And they're a blast! This is a remix from @MagnumDanger's Lego Wreath on Thingiverse. This user redesigned the Lego brick to not need supports when…
This model is compatible with the lego system.
You can use it to study anatomy or for base mesh to modeling other characters.
The box is made of 3 parts and the cover and carrier are universal for whatever base will be used. The base is specific designed to house an LD2410C sensor.
As a follow-up on my temperature-tower for Bambu Studio, I created this Acceleration-tower . (and also a speed-tower ). Its width is designed to fit in a 1x2 gridfinity basket. The general presets work, but I want to explore the effects…
Settings see pictures, all other settings to default. Thanks for downloading in advance and please don't forget to like this modell!
Seeed Studio XIAO ESP32-C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivities. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.…
This model is compatible with the lego system.
Just an 3MF file with modifier to be printed to display the fuzzy skin of bambu studio.
NEW MODEL 03/25 with POWER BUTTON on the front ! Improved model with mechanical POWER BUTTON extension on the front. An again improved and redesigned body for better print quality. Fits on building plates of all PRUSA Mk3,MK4, CoreOne or…
Here's a compact stand for taking great product photos with the right background! Designed with SolidWorks. Category: Camera
My take on studded wheels for the Worx Landroid robotic mower. It's heavily inspired by https://www.thingiverse.com/thing:3750909 , but I designed it from scratch in OpenSCAD. It's been tested on an S500i and an M700. So far, it works…
A simple solution to keep your cables organized on any standard equipment rack which includes, servers, networking equipment, and studio equipment. The model features 2 holes appropriately spaced for mounting anywhere on your rack. It…
This is a simple earring holder design with notches to hold hook earrings and holes for studs. The holes are also sized large enough that hook earrings can also hang from them.
Remixed with the intention to use the Xiao Sense camera as a facial tracker with Project Babble.
This mini photo studio can be scaled up or down so it will fit any print plate size. The regular version of the model is recommended, but if you want to save filament, you can also print the light version with thinner walls (although the…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO nRF52840, which is an Arduino & CircuitPython capable Nordic nRF52840 board with Bluetooth 5, BLE and NFC that comes with an onboard antenna and costs around $9.90. The product…
