579 models
This minimalist bag clip is a simple, reliable way to seal open coffee bags and keep your beans or grounds fresher for longer. Designed for fast printing with no supports , and strong enough for everyday use. Perfect for coffee bags, tea,…
Print approx. €3.73–€4.56 excl. taxPreliminary estimate for one variant
The design is my own. Its easy to print, with no supports. If you need feel free to glue parts together. Default file are 7x5 bottles (maximum Prusa i3 print bed) and 20 degree stand. If you wanna change number of bottles or degree of…
Print approx. €3.67–€4.48 excl. taxPreliminary estimate for one variant
Put this informative sign on the door to your workspace, or at your printer's door. It's designed to print easily without MMU/AMS with just one manual color change. Printing instructions: Layer height: 0.2 mm (important) Top surface/top…
Print approx. €1.35–€1.66 excl. taxPreliminary estimate for one variant
M16x1.5 threaded blind stuffing to close unused M16-openings in housings. Unused PG9-openings or PG11-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
PG21 threaded blind stuffing to close unused PG21-openings in housings. [1] Thread type: PG thread [2] Diameters for PG21 opening: a) threaded hole: 26.8mm / PG thread b) drill hole without thread: 28.3mm [3] Sealing: An optional…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
PG11 threaded blind stuffing to close unused PG11-openings in housings. [1] Thread type: PG thread [2] Diameters for PG11 opening: a) threaded hole: 17.3mm / PG thread b) drill hole without thread: 18.6mm [3] Sealing: An optional…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
PG13.5 threaded blind stuffing to close unused PG13.5-openings in housings. [1] Thread type: PG thread [2] Diameters for PG13.5 opening: a) threaded hole: 19.1mm / PG thread b) drill hole without thread: 20.4mm [3] Sealing: An optional…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
PG16 threaded blind stuffing to close unused PG16-openings in housings. [1] Thread type: PG thread [2] Diameters for PG16 opening: a) threaded hole: 21.2mm / PG thread b) drill hole without thread: 22.5mm [3] Sealing: An optional…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
can be printed without support
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for one variant
M50x1.5 threaded blind stuffing to close unused M50-openings. Unused PG42-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET
Why I sleep on my side and only use a single ear plug. Used to put one in my wallet, and now I have this tiny container for it. You can also use it for other small things like medication, a secret note, a 0.01 nozzle printed statue of…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
PG48 threaded blind stuffing to close unused PG48-openings in housings. [1] Thread type: PG thread [2] Diameters for PG48 opening: a) threaded hole: 57.8mm / PG thread b) drill hole without thread: 59.3mm [3] Sealing: An optional…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for PETGSource material: PET
I want to store my favorite brushes inside wet palette. I made this module. Just stick it inside Wet Pallet top part with glue, after print up. Positioning is better with one brushe in holder. Type of wet palette:…
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
A magnetized storage bin for random airbrush stuff. This bin has a total height of 21.2 mm and the inner height is 20 mm. You need 8x 6 x 2 mm magnets. This is part of my magnetically stacking “Airbrush Storage” system. Check out more…
Print approx. €3.02–€3.70 excl. taxPreliminary estimate for one variant
This is my first attempt at making a 3d model. A 1x2 gridfinity thing that holds the random stuff I use most often. Printed on an ender 3 s1 pro with silk PLA.
Print approx. €5.82–€7.11 excl. taxPreliminary estimate for one variant
Watering hole stuffing for Savic Rody Cavia cage (70 x 45 x 31 cm), it is originally for guinea pigs, but also can be commonly used for hamsters. We have faced the problem with biting the plastic around the watering holes so I designed…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
These pegboard hooks and mounts are designed for standard American pegboard with 1 inch (25.4mm) spaced holes that have a hole diameter of 3/16 inches (4.8mm). If you like what I am doing, just send a friendly comment. Knowing people find…
Its a pencil holder I use for pens, markers and remotes. 3 designs available! NEW Versions 2 & 3: With dividers, also helps keep your pens standing at attention. Get your Prusameters… Post your Makes! If you like this project, please…
You can get a wire to attach the tail to the waist and might need a little drill to make a hole as the same size as the wire you use. You can do the same for the wire that is attached to the spike (I don't know the name of the thing ) to…
A collection of elements used for the game Lord of the Rings: Journeys in Middle-Earth by Fantasy Flight Games (FFG). Note : As there are many sources for this, there are many different licensing going on. I don't know how to properly do…
Mechanic Parts Tray 145x170x15mm - Mechanic Stuff It is ideal for storing small parts or screws, for garage, maintenance, or DIY Overall dimensions: 145x170x15mm The model may be imported as a single assembly or grouped object. Before…
These are Storz and Bickel Dosing Capsule Magazine funnels and stuffers. With this tool you can fill up to 9 capsules of the magazine at ones. Update (New and updated parts are added): -Version 2 of the multi funnels for 8 and 9 capsules…
Requirements: Requires this library: https://github.com/Irev-Dev/Round-Anything Download it to the same folder as the model. Benefits of customizability Ability to change almost all parameters of this model allows you to use if for…
These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
Lampe und Zubehör für die Parkside Lochwand. Für die Lampe benötigt ihr ein Alu-Profil für LED Strips mit Halteklammern. die Halteklammern werden mit einer M3 Schraube und Mutter an den gedruckten Lampenarmen befestigt. Lamp and Stuff for…
Update on 2/10/2023: I added a different “Rastered” set that has only one registration ledge to accommodate people who may have situations where they cannot use the bottom ledge in the original design. These 3 new designs are the same…
A replacement straw for “Great Stuff” spray foam canisters. If you're like me, you have many small jobs, but after one use, the straw becomes clogged and unusable. With this model you can print your own and reuse a partially spent can…
IMPORTANT UPDATE - PLEASE READ: 11/8/2025: There is a newer version 3.0 of this case, which was just released, and is linked below. The new version 3.0 design has a number of updates and improvements over this version 2.3 design, and is…
6/29/2024: There is a new version 2.3 of this case with the following improvements: Thicker and wider gasket New mounting cleat system (which can be previewed on this design) No changes to the overall dimensions of the case Available in…
Inspired by Heroclip by GearAid https://www.gearaid.com/pages/heroclip and Printables's Voronoi Patterns contest this hybrid gear clip allows bags, backpacks or jackets be hung on places, where they otherwise wouldn't. Printed in PETG ,…
This is a simple pen and stuff organiser for the busy desk. It's designed to hold pens, scissors, but also cards and other smaller items on the front. It's a long (around a day on 0.4mm nozzle) and uncomplicated print. Print instructions…
These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
Modular Customizable Lamp for 1000 logos E27 (Batman, Star Wars and other stuff) A lamp in which you can change the logo, insert the company logo, your favorite superhero badge or any other graphics from the game. It is enough to add or…
Let your phone or stuff relax :) Printing Printed in PETG / 0.3 layer height PLA should work too (mat part needs proper bed adhesion) Print parts in given orientation Don't use supports or brim Assembly Also check out the corresponding…
I wanted a custom hook with a larger than normal hanger for bag loops and a clothes horse that needed taking up off the floor in a cupboard. I wanted the lip to lean outward to make it as easy as possible to locate things on the hooks. So…
I've been on an organizing kick lately in my kitchen, and I ran across an under-shelf cling-wrap box holder. But, I didn't much care for it. It printed tall--very tall-- so it takes a bit longer, since printing along the z-axis is slower…
This is the updated V3.3 Version of the 16 BIN (4x4) 6U Gridfinity Box for Stuff. This is designed to fit on an Ender3 size bed (the footprint is 196x214mm). This is 16 bin version of the 20 bin Gridfinity Box For Stuff. See the 20 bin…
Organizer for the kitchen for several baking ingredients such as baking soda, vanillin sugar or also bigger sachets. Size of the pockets: Small (4x): 65x40 mm Big (2x): 123x40 mm Intermediate (1x): 81,5x40mm Print settings: Layer height:…
Let's set the scene. You live in an old house, your landlord can't be bothered to actually maintain the property, so you're stuck with outlets that are 20 years past their expiration date and have as hard a time holding on to your plugs…
Made a wall mountable for my outdoor brushes, although I think this model can be used to hang other stuff inside/outside. made two holes for centering the screws for mounting in v1 Made two bigger holes for v2 material i used was petg…
These are the latest version (v 2.0) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
For all awesome photos, makes, reviews and more visit original source links. DaveMakesStuff description on thangs.com: “Hey, if you’re in the neighbourhood drop by for a… CUP OF TEETH!!!! WHOA HA HA HA!” Teeth cup and saucer are linked in…
Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…
THIS IS UNTESTED - PRINT AT YOUR OWN RISK (but please provide feedback if you do). Version 2.4 (2/20/2025) small update to fix incorrect plate descriptions in the 3mf profile. The current profile is…
Cable carriers , also known as drag chains , energy chains , or cable chains depending on the manufacturer, are guides designed to surround and guide flexible electrical cables and hydraulic or pneumatic hoses connected to moving…
My kids and I enjoy playing Stuffed Fables (and now also Oh, Brother expansion). I also enjoyed painting the minis. Problem is the game is a pain to setup & pack away, plus all the painted minis were getting knocked around in the awful…
A fantastic little 3D printable cash tray for your cash stuffing needs. Commissioned by Ravenn from: https://www.youtube.com/@LifeWithRavenn/featured For Monogram free Models check her Etsy out:…
Needed 30 bins for an assortment of screws for the "Gridfinity Box For Stuff (BFS) - 20 BIN Version 2.0" by @MyStoopidStuff since the original 25bin box was too large for my X1C and a 30bin definitely will. By splitting the bins in…
M20x1.5 threaded blind stuffing to close unused M20-openings. Unused PG11-openings or PG13.5-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details…
Print from TPU. 15% gyroid infill worked well, feels slightly softer than original foot. Otherwise I just used the Generic TPU and 0.16mm Optimal profile. If you get stringing with TPU it's probably best to print sequentially instead of…
Create several inserts for screwdriver or other stuff without the need to fix it on the honeycomb with a screw. Screwdriver Hook 20mm (0.787in) Hook 40mm (1.575in) print with Orange Prusament.
These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
This is a mini version of my Box For Stuff . This case is designed to fit on a Bambu A1 MINI or Prusa Mini size printer with a 180x180mm bed. I don't own an A1 Mini, but I did confirm that this design slices correctly using an A1 Mini…
M25x1.5 threaded blind stuffing to close unused M25-openings. Unused PG21-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…
This is not my creation. I am uploading this to Printables as it is not currently on this site, and I want to help archive it here as well. I love chess, and this is the most unique chessboard I have ever seen. I hope to print one for…
This is the updated V3.3 Version of the 16 BIN (4x4) 12U Gridfinity Box for Stuff. This is designed to fit on an Ender3 size bed (the footprint is 196x214mm). This is 16 bin version of the 20 bin Gridfinity Box For Stuff. See the 20 bin…
Reupload from https://www.thingiverse.com/thing:4822701 DaveMakesStuff is a FANTASTIC creator! --- These print-in-place twisty tubes can be used as puzzles or just fun fidget toys. See here for video: https://youtu.be/_59nRTc5oJ8 See here…
TINY TUBS Tiny tubs for Tiny Stuff! A set of tubs, wall mountable or free standing. Each tub slides easily in and out of the holder and has a clip on lid, the standard tub is 40mm x 40mm x 40mm and the Taller tub is 40mm x 40mm x 85mm.…
Please also check out my useless sign: Put this informative sign on the door to your workspace, or at your printer's door. It's designed to print easily without MMU/AMS with just one manual color change. Printing instructions: Layer…
Wanted a Hook to hang my empty backpack on at work. Didn't want to put a hole in the wall. Thought I'd try to use 3M command strips. Wasn't sure if it would be strong enough, but so far, so good.
This is a mini 1x2 version of my 4x4 Gridfinity Box for Stuff (v3.3) 6U and 12U, and is intended for folks who want to test the fit of parts before going all in on a much longer print of the larger boxes. The assembly is the same, but due…
Kalkstuff - cable organizer - range câble - IKEA print in PETG no support I put 4 models, do not hesitate to ask if you want a special model stick double-sided tape on the flat part enjoy!
When using the exits of Motorized lift 2021 edition (v4) for stability, it is sometimes desirable to be able to close one of the exits in order to build higher. With this part you can close any exit (from v130). Use flexible filament to…
filament holder with print-in-place swiveling filament sensor mount. uses the original spool holder and: 4 m5 screws 2 m5 nuts 2 m5 T-nuts 1 m3 heatset insert (or you can use the on_dees version that uses an m3 nut) 3 m3 screws 2 m3 nuts
Heyho I thought about how to organize cutlery well. I think most of the solutions for drawers are quite good :) So here I have a solution for other places where you want to store your cutlery or other things. For example, on the wall in a…
Inspired by this https://www.thingiverse.com/thing:3128783 Supports: No Resolution: 0.2 Infill: 15%
A name can be added to the middle if you'd like.
There are many storage boxes out there, but this is my Box For Stuff (Updated to version 2.1) . Presented here is the basic, barebones model, with no bells and whistles, but there are other remixes for Gridfinity 20 bin or 25 bin boxes,…
Print on 0.2mm to have the exactly 3mm of high
This is a makeup (or other stuff) organizer with several 30x30mm compartments with different heights. Two compartments are subdivided in a 2x2 fashion, and two larger spaces are in the front. Total size 240 x 150 x 75. The larger file has…
Simple Replacement clip for stuffed animal on keychain or bag. Prints in relaxed state. bring the two end over eachother to introduce tention and the clip stays shut Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports:…
My Use Case My wife takes her many rings and earnings off and on quite often so I made this secure container that clips onto her Stanley Handle. Print Advice The threads have a pretty high tolerance so the resolution doesn't have to be…
I redimensioned to 17 x 14 x 20 cm to organize my coffee stuff, fitting also Hario V60 02 packs, but also some minor accessories and supplies like Aeropress filters and parts, thermometers, small scale, paper filters for espresso baskets…
This is my calibration Cube with a lot of useful settings. The Cube is 20x20x20mm. So you can test your e-Steps, Angles, Bridges, Retract and Flow with one Print. On the Front you can find the Angle Test with 40, 50 and 60 Degrees. There…
UPDATE: 1/10/2025. This version is now deprecated. Please find the updated version here . Here are 12 tiny nesting bowls that fit neatly into one another. I designed these for organizing game pieces, but you can use them for all sorts of…
M32x1.5 threaded blind stuffing to close unused M32-openings. Unused PG29-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…
Logo stuff for my favorite game, Half Life 2. One is a desktop logo stand made with multiple colors. The other is just the logo with 2 colors. No supports and printed on their backs.
2 Inch Wide Hangers Fits Knipex Automatic Wire Strippers , hammers, etc. Also includes a variant “with fence” - stops tools from sliding off of the hangers. Drill Holder Can be used to hold certain lighter drills - uses a friction fit on…
Hey everyone! Today I bring you a nice little display shelf. It prints fairly fast and easy. It has a clearance of about 70mm between shelves but if the things you are putting on it are small it can still fit a lot, giving you more room…
I made this for my Tupperware meat grinder. I guess it might work on other brands too. The meat grinder end is 57mm in diameter. PETG. No PLA, unless you dont plan to reuse it. I've printed it in clear petg, so that I can see whats going…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here's a tiny tophat I designed…
Once I bought some pulleys to hold my ladder up to the ceiling, but they were not strong enough one day they broke. So I designed new pulleys, and I designed them in such way outside would look the same, both halves would be the same so…
Made from bottom up but the principal is not new. I've put some descriptions on the files and underneath. I've attached a candle-holder with room for a wick-holder ready to print that fits the model. It's possible to emboss it if you…
I designed this thing to hold headphones, but I suppose you could use it for other stuff.
Prints with minimal supports only at the top lips of his mouth.
PG9 threaded blind stuffing to close unused PG9-openings in housings. (normal usage) [Extension for PGxx to PG9 adapters] For the use with PG-adapters (PGxx to PG9) with very little space between the PG9 cable gland openings, I added a…
This butterfly stand works great for small pots but can be scaled in your slicer for larger pots and 3D printers! This default size works great for most pots up to 7". Use a few drops of super glue when installing the legs for added…
M12x1.5 threaded blind stuffing to close unused M12-openings or PG7-openings in housings. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for M12x1.5 opening: a) threaded hole: 10.5mm / M12x1.5 thread b) drill…
This is a collection of things I designed for our Adria Action caravan. Our is a 361LH from 2021 and I haven't tested that the designs work for other versions or model years. So far: A double hook for the toilet door A single hook for the…
Reuse the cases from your old VHS video cassette to store small parts like fishing lures etc. There's three variants, marked by an acronym in the file name: no bottom (nb): prints fastest, but small parts like fishing hooks tend to creep…
Due to the seal in the lid, the contents are not mixed even if the box is upside down Flex Filament needed for sealing and buckles! For the Lid i was using transparent filament. For the hinges I used sturdy letter clips. You can also use…
Thought I would revisit this model and add another style element to it. Mention Calvin and Hobbes and suddenly feelings of nostalgia, innocence, imagination, and childhood come up with a nice fat dose of naughtiness. Who can forget how…
There are several parts here that will save some money on your restoration project. Seat belt guides (on seats) use fine print. Weber Phenolic spacer 17mm (Can be scaled to increase height). Sandwich the spacer between 2 gaskets to reduce…
This is IBM PS/2 Model 30 286 (8530-E21) that was presented to the public in 1988. It was my first computer and I used it from the mid 1990's till the beginning of 2000's, when too many programs started to state that they needed a 386 or…
I remixed ( https://www.thingiverse.com/thing:1781090 ) this puppy for the board game Stuffed Fables. I printed the large version because my daughter really wanted it. The card for Stuffed Fables that goes with this miniature can be found…
Master Oogway`s stuff Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black Category: Props
I quickly designed a G 1/4" plug for spare radiators in my storage, with two versions, round and hexagonal. NOTE: it's not tested for leaks , it's not meant for use while coolant flows through it, just to plug inlets and outlets during…
Another Funny Sign - "in Alcohols defence, I've done some Pretty Dumb stuff while Sober too", multi colour wall art print, printed in ZIRO Black and Overture Matte White PLA. For more funny signs see my (growing) collection of them here -…
![Wormhole [Non-Euclidean] Chess Board by DaveMakesStuff](https://media.printables.com/media/prints/597088/images/4754480_9b90abb5-a690-4373-8cdd-2c63b0ccbc2c_5001312e-1aaa-46a1-b491-9d99f1c8657b/featured_preview_01ebcba3e571f19245c5a9bc52a1f1d818a7121490_800x600.jpg)
