Search results: stur

Sort order

Counting matching models…

P
Printablessquinn

Sturdy Curvy Soap Box

A sturdy soap box which makes use of a fun curvy shape to create raised interior rails for the soap to sit on for quicker drying , and includes a strong built-in latch to help secure the case closed when you're ready to travel. Three…

Downloads
2,957
Likes
842
Rating
4.77
P
PrintablesJan Hubík

Capacitive Soil Moisture Sensor v2.0 Cover

Outdoor cover for the popular analog Capacitive Soil Moisture Sensor v2.0 (according to comments, this also fits version 1.2). No soldering changes are required. I just crimped a JST 2.54 mm female connector on the cable. The cable…

Downloads
1,494
Likes
93
Rating
5
P
PrintablesAinon3Dtisk

Raised middle finger hand gesture

Hello, I have here for you the Gesture of the hand with the middle finger raised . A luxurious sculpture for your desk, especially for work :-D :D. It works great :-D. It prints very nicely. Good luck with the printing! I used PLA/PETG as…

Downloads
564
Likes
31
Rating
0
P
PrintablesMatt Boyer

Sturdy base for SUNLU S2 Filament Dryer Box

The Sunlu S2 is great, except the fact it's base is not very wide and the whole thing tips over a lot. At least mine used to. The 2 piece base screws together and clamps onto the dryer box. You'll need 1 M5x30 screw & 1 M5 nut Insert the…

Downloads
523
Likes
105
Rating
4.83
P
PrintablesVariable

Less chunky screw for Flexible & sturdy phone arm

Cut the thumb grip in half to shorten print time and clean up the look a bit. Printed in Overture Matte Black PLA with no supports on my mini.

Downloads
448
Likes
77
Rating
4.67
P
PrintablesPeter Farell

Atlantic sturgeon

Atlantic sturgeon Originally, the Atlantic sturgeon was considered a worthless fish. Its rough skin would often rip nets, keeping fishermen from catching more profitable fish. Sturgeon were one of the types of fish harvested at the first…

Downloads
433
Likes
70
Rating
0
P
PrintablesPeter Farell

Tatooine Moisture Vaporator

Tatooine Moisture Vaporator

Downloads
365
Likes
66
Rating
0
P
PrintablesMetikumi

Sturdy Box with Lid and Thick Walls for Transparent Filament

This is my design of a box with a lid with intentionally thick walls to be printed with transparent or translucent filament. The walls are 4mm thick, which makes the box very robust, but more importantly, it will look great if you print…

Downloads
364
Likes
53
Rating
4.67
P
Printablesprntmkr

Sturdy Ice Scraper - Super simple, Super stable

Intro Winter returns back to the northern hemisphere… Cold days and frosted cars are back… Car owners need a good and stable ice scraper now. And this is exactly what this model delivers! Why you'll love it? Print is done really easy…

Downloads
328
Likes
74
Rating
5
P
PrintablesVariable

Pole Clamp for Flexible & sturdy phone arm

A simple pole clamp for the system so I could attach my ring light directly to my desk.. The pole that it currently attaches to is 35mm in diameter. Printed in Overture Matte Black PLA with a raft and supports on the build plate. Hardware…

Downloads
302
Likes
76
Rating
4.67
P
PrintablesEmkatech (Mike)

Shopping Basket with Screw Assembly – Practical, Sturdy, and Stackable

Shopping Basket with Screw Assembly – Practical, Sturdy, and Stackable This 3D-printable shopping basket is designed for everyday use and easy assembly. The construction is solid and functional – ideal for home, workshop, or office. 🔩…

Downloads
157
Likes
34
Rating
0
P
PrintablesFC2M3D

Do Not Disturb Keychain (Remix)

I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Downloads
132
Likes
16
Rating
0
P
Printablesjurassic73

Sturdy Pegboard Retention Clip (remix)

Remixed the strongest pegboard clip I've seen to make it a bit more sturdy and added removal openings

Downloads
130
Likes
38
Rating
5
P
PrintablesPenguinNinja

Sturdier Truck Velcro Holders

This is a remix of the Truck Velcro Holders made by David D . I added the additional triangles between the original model to sturdy up these holders. I printed this so that the model's orientation is taller, rather than wider, on the…

Downloads
73
Likes
8
Rating
0
P
PrintablesSknown

Signboard for "Don't disturb Zoom Meeting in progress"

There are a lot of online meetings these days, and you see lots of trouble. The most common one is that someone comes into the meeting. I made a sign board for during zoom meetings. A step file is also uploaded, you can mix, change fonts…

Downloads
69
Likes
10
Rating
5
P
PrintablesWolfeur

The Crew box insert (sleeved cards, sturdy/light versions)

The box is modeled for sleeved cards to be snug in their space. Fusion 360 file provided if you want to change the dimensions for unsleeved cards. Note that the deck's thickness will be greatly reduced as a result. The height of the…

Downloads
43
Likes
5
Rating
5
P
Printableswill

Moisture proof box

The size of the box is 3*26*17. Three components, open the cover and put in silica gel desiccant.

Downloads
28
Likes
3
Rating
0
P
PrintablesLOCKit

Sturdy parametric towel hook hanger with snap fit! no supports - easy make!

Tired of wet towels laying around your bathroom? Try this towel hanger that snaps on pipe radiator. This is a parametric design, it lets you take control of dimensions with the help of FreeCAD-1.1 Software can be found here:…

Downloads
17
Likes
4
Rating
0
P
PrintablesMarc

strap/tension belt mount for motorcycle crashbars / Spanngurthalter für Motorrad Sturzbügel

I secured my bags against movement with these tension belt mounts. Tested on a 3 week offroad morocco trip without any issues. The outer diameter of the crashbar is 20,3 mm (0.8 inches). The screws used are M6x20 and a locknut. I…

Downloads
17
Likes
4
Rating
0

Bowindi Sturm Stativ Bausatz

Please do not forget to protect the 1/4UNC mailscrew(Threadbolt?) by arming it inside with an M3x10mm (countersunk) screw. Otherwise it is easyily overturned, streched or broken. I also suggest to useUhu Plast spezial to connect pipe…

Downloads
14
Likes
6
Rating
4
P
PrintablesAlvomane

Velux compatible storm fitting for cover plate | Velux kompatibler Sturmbeschlag für Abdeckblech

This is a storm fitting for the cover plate of the storm protection at the bottom of Velux windows, compatible with the Velux original (cf. e.g. here or here ). Print the fitting in STL orientation with 0.2-0.3mm layer height, 4 outer…

Downloads
13
Likes
5
Rating
0
P
PrintablesEASY print

Door mount holder for hay moisture tester

This is to hold the prob so it is not sitting on the floor under foot

Downloads
4
Likes
0
Rating
0
P
PrintablesFunkyArt

Flexible & sturdy phone arm (100% Printed)

A 100% 3D printed Smartphone-holder-arm that offers, at least, three axes. And the option of double braces between the axes. In the standard configuration, the arm easily supports around 500 grams in any position. The versatility of this…

Downloads
25,207
Likes
8,225
Rating
4.83
P
PrintablesFritz

Tiny Dragon Egg Box (sturdier)

A small box in the shape of a scaled dragon egg with a hinge and latch that snaps shut. This is a remix of Tiny Dragon Egg Box by GreyFluffs and Dragon ornaments by Syxiaolu94 with some modifications to make them sturdier, so that it…

Downloads
23,431
Likes
3,924
Rating
4.84
P
Printablesrandom.ae

Sturdy Print-in-place Panel Latch for 2020 Extrusion - Voron Panel Clips

I needed something like a panel-latch for a not-a-voron. I was using RichardM's Voron 2.4 Filament Latch on my Voron. I thought about modding his for my purpose, but decided to re-implement it myself and make some improvements. Heavily…

Downloads
12,263
Likes
264
Rating
5
P
PrintablesXYZ.Thought

Automatic PET bottle watering \ drip irrigation system ''sturdy and easy to print''

It is a system that helps to keep the soil moist wherever it is needed in a flower bed, garden or flower pot. Tested with a 1.5-liter bottle of mineral water, it lasts up to 4 days, but all standard bottles are suitable, I recommend…

Downloads
10,069
Likes
2,328
Rating
4.68
P
PrintablesDET-Man

Sturdy 3-Point Stand for Open Ball Vise (XL Base)

Building this awesome 🤩 Open Ball vise and the XL Base and having the Fusion file at hand 👌 I felt I needed to improve the very few things that were not perfect for me 😎: Give it a 3-point stand so it's 100% wobble free on the desk 👍…

Downloads
8,306
Likes
131
Rating
4.5
P
PrintablesmoWerk

Mushroom Shelves with sturdy wall mount | Fungus Shelf

Large metric 16cm version of the Mushroom Shelves. Scale to your liking. The newly designed bracket is printed in place (upside-down) and will scale with the individual shelf model. Design #5 and #6 have been added in this remix Update!…

Downloads
4,983
Likes
1,674
Rating
5
P
Printableswaveman

Sturdy Infinity Cube

Infinity cube with strong hinges that won't break easily. This cube is designed with a lot of slack, so that it moves freely. I designed this after having several fails with other models, where the hinges would break when trying to loosen…

Downloads
4,476
Likes
375
Rating
4.91
P
Printablesvivamus3d

Sturdy Tube Squeezer - various sizes

Inspired by sns13s toothpaste tube squeezer on Thingiverse, I created my own version of a tube sqeezer which is more sturdy and easy printable. I liked the exlicit lock of sns13s design (much better and more reliable than printed ratchet…

Downloads
3,788
Likes
103
Rating
4.82
P
PrintablesThreeD-Michael

Sturdy soap and shampoo dish for your shower

Very sturdy, carries soap or multiple shampoo bottles. Fits 18, 20, 22, 25 and 28 mm shower rails. Easy to print and easy to mount. Update 2023-01-03: I have added a variant for shower rails with a diameter of 28 millimeters. Update…

Downloads
2,682
Likes
438
Rating
4.98
P
PrintablesDrKronos

Sturdy Stackable Storage Tray

Easy print, no supports required.

Downloads
2,651
Likes
676
Rating
4.44
P
PrintablesFirstlayer Oy

Pull-Handle Set: Modern, Lightweight, and Sturdy

Modern, Lightweight, and Sturdy Pull-Handle Set Introducing our versatile pull-handle set, perfect for anyone seeking a durable and stylish solution for their home, office, or project. Designed with a modern industrial look, these handles…

Downloads
2,540
Likes
826
Rating
5
P
PrintablesWallArtMania

Do NOT Disturb funny sign - MUST HAVE

Filament leftovers? No problem, print this MUST HAVE sign!

Downloads
2,436
Likes
558
Rating
4.94
P
PrintablesSaitoSquare

IKEA Skadis Shelf Panel (16cm x 8cm) - Sturdy

16cm x 8cm small shelf panel for IKEA Skadis board. The fixture is snug fit providing a very sturdy platform for displaying small objects. A small bump is added in the middle for extra security. The panels can be placed side by side.…

Downloads
2,397
Likes
320
Rating
4.65
P
PrintablesThreeD-Michael

Sturdy soap and shampoo dish for your shower

Very sturdy, carries soap or multiple shampoo bottles. Unlike my other designs, this dish is fixed on the back. Fits 18, 20, 22 and 25mm shower rails. Versions for left and right mounting available. Easy to print and easy to mount. Update…

Downloads
2,279
Likes
471
Rating
5
P
PrintablesTayG0

Lint Roller Handle (Large and Sturdy)

Designed to fit 'KONIZY' refills from Amazon , which are 100mm long, with an opening that is 38mm wide. I believe this means it will fit most standard refills, Ikea and most Scotch-brite included, though I would measure first. (EDIT: It…

Downloads
2,149
Likes
653
Rating
4.98
P
PrintablesGodLovesYou

1-5 inch c clamp - Strong sturdy c clamps

This was a remixed model to be much stronger and host a varitey of sizes to accomadate many diffrent uses. They print in three peices then the end cap snaps into the threaded rod. Each clamp is posted indivisualy as well.

Downloads
2,085
Likes
626
Rating
5
P
Printablesjoergel

Silica Dry Box for Bambulab AMS without moisture meter

I had so much silica gel left for dehumidifying and drew myself a little box. Can be printed completely without support. In the picture you can see the 3 versions from the development. The last one can be seen on the far left. The Fusion…

Downloads
1,987
Likes
148
Rating
5
P
Printables3D-Druckbude

Elegoo Centauri Carbon: Yet another but sturdy riser

Hallo liebe 3D-Druckfreunde und Centauri Carbon Fans! Bei meinem Elegoo Centauri Carbon wollte ich mehr Platz zwischen Druckkopf und Glasabdeckung bekommen. Die im Internet kursierenden Erhöhungen waren mir ein wenig zu niedrig, kosteten…

Downloads
1,844
Likes
321
Rating
5
P
PrintablesBasementLAB

2020 Heavy Duty Sturdy Door Handle

2020 Heavy Duty Sturdy Door Handle Overall dimensions: 20x45x140mm Suitable for:

Downloads
1,611
Likes
638
Rating
5
P
PrintablesEngineer4Fun

Sims plumbob headband clip. Lightweight, sturdy and easy to print.

Pictured is Overture neon green silk PLA with 0.2mm layer height. Just print all three pieces and glue together. The hollow shell design of the plumbob is lightweight but reinforced in the area that attaches to the clip. Perfect for Sims…

Downloads
1,382
Likes
221
Rating
5
P
PrintablesRoland Goller

Vorzelt - Abspannleiter - Tellerkopfschraube - Sturmsicherung - Tent

Halterung Abspannleiter Vorzelt für Tellerkopfschrauben Filament: PETG or ASA Settings: 7 Wände und je 7 Boden und Toplayer, Infill: Gyroid 42% Wenn dir mein Modell gefällt, würde ich mich über ein Like freuen If you like my model, I…

Downloads
1,328
Likes
80
Rating
5
P
PrintablesRain And Storm

Protective Covers for MC4 Solar Panel Connectors (plugs, caps, moisture, water, dust)

Set of two watertight covers for protecting MC4 connectors from dirt and corrosion. Parametric, open-source, free. Designed using ShapeScript . Features Actual MC4 locks — not just plugs or caps, these covers attach the same way MC4…

Downloads
1,327
Likes
124
Rating
4.92

Sturdy print-in-place draw latch

This is a small but sturdy latch that can be printed in place. It has a flat surface for your printing pleasure. No supports, no rafts, no brim. Just the way we like it. This kind of latch is typically called tension latch, toggle latch,…

Downloads
1,315
Likes
199
Rating
5
P
Printables3DPrintBunny

Star Wars door handle signs do not disturb

A set of Star Wars do not disturb signs to hang on your door handle. Obiwan Kenobi, Darth Vader, TIE fighter and Boba Fett. @3DPrintBunny

Downloads
1,299
Likes
375
Rating
4.83

Sturdy Wall Mount Headphone Stand

I plan to update this model with alternative versions, cad is available as is step but uses a feature in the timeline for the geometric pattern that will not be editable for most users. Uses standard #10 construction screws (probably 3.5…

Downloads
1,229
Likes
139
Rating
5
P
PrintablesLanzDesign

Geometric Pencil Pot Series: 11 Designs (Vase Mode and Sturdy Variants)

These pencil/pen pots are designed using helical, hexagonal, spherical, and spiral patterns and geometries. The aim was to produce pencil/pen pots with a modern aesthetic and serve as functional art on a maker's desk! For each design…

Downloads
1,122
Likes
252
Rating
5
P
PrintablesPolly-Jeanius

Sturdy Automatic Chook Water Bowl (Chicken Waterer)

Remix of ‘Chicken waterer using PET bottle’ by kkwsiu adding a sturdier base and elevated water level. Our delightful and hilarious rescue chook Harriet has anarchistic tendencies when it comes to her love of knocking/tipping/pushing…

Downloads
1,113
Likes
112
Rating
5
P
Printablesfgebhart

Anti Moisture Silica Gel Box - with Hinge & Latch (print-in-place)

Keep the environment dry by using this silica gel box. I remixed my previous "Click - Box" design, see: https://www.thingiverse.com/thing:2326019 UPDATE 1: like mentioned in the comments the previous version had some problems with slicing…

Downloads
1,083
Likes
129
Rating
4.71
P
PrintablesLazerlord

Command Strip Headphone Holder (Simple and Sturdy)

Are your headphones sitting on the floor right now? Are they cluttering up your desk? Do you have too many headphones and don't know where to put them all? No more shall your headphones be treated with such disrespect! Treat them right…

Downloads
1,079
Likes
124
Rating
5
P
PrintablesWiz

Sturdy buckle

A sturdy buckle replacement for 26mm straps. I printed it in PLA with 6 walls (so it's basically a solid piece)

Downloads
891
Likes
96
Rating
5
P
PrintablesCrsMthw

Better Stronger Screws for Flexible & sturdy phone arm (100% Printed)

The original screws were printed vertically. After using the original screws for a few months, it started to split at the layer lines, so I decided to make these screws, that you can print horizontally on the bed, which also gave it an…

Downloads
885
Likes
104
Rating
4.89
P
PrintablesitsDan

Sturdier Low Profile Mic arm

Huge thanks to @NicolasB_1901586 for the original model, i had to make some adjustments for my use case, these may or may not work for your printer if your tolerances are better/worse, I printed these on an ender 3 and cr10, both…

Downloads
884
Likes
88
Rating
5
P
PrintablesRob

Sturdy coat/wall hook

I wanted a simple sturdy hook that would sit flush to the wall even if using hardware that sits a little proud. e.g. A Rawl plug or plasterboard/dry wall fitting. The recess in the back is 1mm deep and 14mm in diameter. Print at about 20%…

Downloads
866
Likes
86
Rating
4.8
P
PrintablesSaitoSquare

IKEA Skadis Shelf Panel (8cm x 8cm) - Sturdy

8cm x 8cm small shelf panel for IKEA Skadis board. The fixture is snug fit providing a very sturdy platform for displaying small objects. A small bump is added in the middle for extra security. The panels can be placed side by side.…

Downloads
859
Likes
120
Rating
4.86
P
PrintablesHojoWorks.com

Simple & Sturdy Dust Pan

Simple & Sturdy Dust Pan

Downloads
818
Likes
58
Rating
4.83
P
PrintablesKMGMakes

AD5X/AD5M Vent Cover With Cutout for Temp/Moisture Sensor

NOTE: This design is a tight fit on purpose - You may need to de-burr or sand down the inner edges of the circle to get the sensor to fit (purely because it needs to be a tight fit due to vibrations etc) A Vent cover for the AD5X/AD5M I…

Downloads
816
Likes
184
Rating
4.86
P
Printablesomri hadar

italian gesture rocker bobble

print the base with supports and the spring sideways

Downloads
779
Likes
68
Rating
4.8
P
Printablesdsnineteen

Sturdy 2040/4040 Extrusion Angle Bracket

In the process of ‘ruggedizing’ my Ender 3 I realised I was going to need some wickedly strong brackets to keep it stiff and square. Not finding anything that really looked the way I liked, and inspired by these great-looking (but…

Downloads
764
Likes
97
Rating
5
P
Printablesgglockner

Sturdy Aerogarden seed pods

I was not satisfied with other seed pod designs for Aerogarden, so I designed my own. The spiral structure is designed to be sturdy for printing without any supports - very low risk of spaghetti as it prints. It fits these seed starter…

Downloads
759
Likes
129
Rating
4.83
P
18+

The source marked this model as adult content.

Downloads
751
Likes
74
Rating
0
P
PrintablesMichaël Fortin

Sturdy Meta Quest 3 and Quest 2 Headphone Mount

Looking for a solution to get better sound on my Meta Quest (previously known as Oculus Quest), I stumbled upon this design by budgiesarecool . I already had some Koss Porta Pros so I printed it and used that for a couple of weeks (after…

Downloads
696
Likes
98
Rating
4.58
P
PrintablesMiguel M.

"Italian Gesture" Spaghetti Measure

Just a spaghetti portion measure with the iconic/stereotipical Italian hand gesture. Holes are for 1,2,3 and 4 typical servings (your “typical” serving may vary). Printing Nothing special to printing this. A color change is certainly…

Downloads
683
Likes
214
Rating
5
P
PrintablesLins

Gaming Chopsticks - Long & Sturdy

Hi. This is my gaming chopstick model. It's long, thick, strong, and grippy. I made it in Fusion 360. Thanks! I am new to 3D printing. My print profile is on Makerworld.com, but it contains 2 plates with 2 sizes, and I added a small .1mm…

Downloads
672
Likes
35
Rating
5
P
Printablesmal0dd

Sturdy Bookend / Book Holder / Book Stop / Book End - Structural Design

This is a robust Bookend (or Book Holder/Stop) designed to organize your shelves and keep your collection upright. Unlike decorative bookends that might snap under pressure, this model is engineered for utility and strength. It features a…

Downloads
663
Likes
56
Rating
5
P
Printablesmarty
18+

The source marked this model as adult content.

Downloads
631
Likes
56
Rating
0
P
PrintablesMadblam

Universal bike handle mount – extra sturdy, fits e-bikes, cargo bikes, dirt bikes.

A durable, universal bike handle mount designed to fit all standard handlebars. Reinforced to support the weight of e-bikes, cargo bikes, or even dirt bikes (if mounted upside down). It’s easy to print: only requires support between the…

Downloads
621
Likes
153
Rating
5
P
PrintablesMZ4250

Hastur, the King in Yellow

Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…

Downloads
620
Likes
66
Rating
0
P
PrintablesJosé Pedro
18+

The source marked this model as adult content.

Downloads
615
Likes
84
Rating
0
P
18+

The source marked this model as adult content.

Downloads
612
Likes
35
Rating
0
P
PrintablesJC

Please Do Not Disturb

"Please Do Not Disturb" door knob/handle hanger. I needed this for working from home when I am in a meeting so my children do not disturb me. It also works for a bedroom. Print instructions I printed this with a 0.4mm nozzle, but a 0.6mm…

Downloads
611
Likes
69
Rating
5
P
PrintablesTs3D

sturdy gold pan (No supports)

professional panning pan for gold and mineral prospecting.

Downloads
570
Likes
34
Rating
0
P
Printablesvanhee_sander

Sturdy Phone Mount for Mountain Bike (iPhone SE)

I created a sturdy mount for iPhone SE to mount a smartphone to a MTB while shredding the trails. The phone can be used for directions from a downloaded GPX file. All buttons are accessible and the speaker can still be heard. The mount is…

Downloads
547
Likes
76
Rating
5
P
Printableschristiangda

Flexible & sturdy phone arm (17cm arm only)

Arm of 17 cm for https://www.printables.com/es/model/647794-flexible-sturdy-phone-arm-100-printed compatible with Prusa MINI.

Downloads
546
Likes
71
Rating
5
P
PrintablesChewbugga

sturdier 22lr ammo box with sliding lid

While I enjoyed using my older model of ammo box, I certainly realized some of its shortcomings. First and foremost I hated that the lid would lose guidance somewhere around the penultimate row of rounds - I usually like to slide the lid…

Downloads
543
Likes
51
Rating
4.88
P
PrintablesVariable

Smaller arm for the Flexible & sturdy phone arm

I wanted to have a shorter arm length and maximize the Prusa Mini's print volume so I shortened the original arm. I printed it with Overture Matte Black PLA with supports on the build plate only.

Downloads
543
Likes
70
Rating
5
P
PrintablesThreeD-Michael

Skat Playing Card Box - Elegant and Sturdy

Elegant and sturdy drawer box with snap closure for Skat and similar playing cards. Please print in the specified orientation, with a layer height of 0.2 mm and a line width of 0.4 mm or more. Do not use a different layer height as the…

Downloads
529
Likes
70
Rating
4.5
P
PrintablesVikKon

'do not disturb' flag for the office.

UPDATE: I have improved the flag significantly, it now includes: The regular flag A longer version of the regular flag A 90° version of the regular flag A longer version of the 90° flag The regular flag holder (it now has a indention for…

Downloads
528
Likes
57
Rating
4.67
P
PrintablesNS

Capacitive Soil Moisture Sensor v1.2 v2.0 Case (box)

Allow me to introduce you Capacitive Soil Moisture Sensor v1.2 and v2.0 Case (box). I required this sensor in one of the previous projects and create case for it, to make it more secure. Hope you will enjoy it. Print instructions:…

Downloads
525
Likes
31
Rating
5
P
PrintablesRomanscan

Apollo’s Gesture – Classical Marble Statue

The Apollo’s Gesture – Classical Marble Statue brings the timeless beauty of Greek and Roman art into modern spaces. Inspired by the elegance of Apollo, god of light and the arts, this statue depicts a heroic pose with an upward gesture…

Downloads
517
Likes
87
Rating
5
P
PrintablesDrJones

Sturdy vase-mode screw container (variable height)

Designed for 0.4mm nozzle with extrusion width set to 0.6mm. See below for other settings. This container is quite rigid for a vase mode print, partly because having double walls, partly due to the thread pattern, and partly because of…

Downloads
503
Likes
147
Rating
5
P
PrintablesTomTom

Ender-3 Display Cover (LCD) - Sturdy Slim-Line with Factory Screws

yet another creality ender 3 display cover. slim-line with robust 1,6mm wall thickness (tied to the base with a large chamfer) and usable with the 4 original screws. if someone wants to design his own cover and has no fun to measure…

Downloads
502
Likes
50
Rating
4.87
P
Printablescoxx

Capacitive soil moisture sensor case

Case for sensor. It is enough waterproof for “standard” humidity. It is not fully waterproof when water sprays directly to case for long time. In this case is necessary to seal by glue. You need also two wood screws 2.5 x 10mm. I printed…

Downloads
499
Likes
41
Rating
4.5
P
PrintablesMarwyn

Parallel jaw pliers (sturdy) - MRW

FUTURE TASKS Specialized jaws for specific tasks Maybe some kind of fast exchangeable jaws or adapters ------------------------------------------------------- ADD-ONS Connectors jaws great for handling balbulab x1/c/p1p hotend connectors…

Downloads
491
Likes
78
Rating
4.93
P
Printablessmdollins

Sturdy Tripod Mounting System for Hadley Telescope

EDIT 03/04/2023 Added f3d and STEP files so these can be remixed. __________________________________________________________________________ Designed a system of parts to create a means of mounting the Hadley to a tripod in a very sturdy…

Downloads
488
Likes
89
Rating
5
P
PrintablesFiddly Bits

Simple and Sturdy Tablet Stand (with variations)

Simple and sturdy tablet stand with a few variations Tablet Stand - Normal Lip For most iPads and other tablets. (Purple print shown in photos) No supports needed Tablet Stand - Deep Lip For thicker tablets and bulky cases No supports…

Downloads
462
Likes
13
Rating
0
P
PrintablesMike

Do not disturb 3d printing in progress door plaque sign plate man cave hobby room

Perfect for the man cave/hobby room! There are 4 versions, 2 with holes in the corners, 2 without holes and with different fonts. Measures 18 x 11 x 3.3cm

Downloads
459
Likes
94
Rating
5
P

Sturdy wall hook

Classic design. Can be used in almost any scenario where something that requires a hook. Print on its side for the best strength. You can scale to some extend according to your needs. Holes are d=5mm at the moment.

Downloads
442
Likes
146
Rating
5
P
PrintablesNexus665

Sunlu Filadryer S2 Filament Guide and Moisture Vent

While the S2 is a good idea in principle, it has some drawbacks - the two filament exits in the shell are quite steeply angled, which does not work well when printing from it sitting at the same level as the printer itself. Additionally,…

Downloads
430
Likes
58
Rating
4.71
P
Printablesappleroll

380mm Sturmörser (Sturmtiger Tank) with Crane and Stowage

[IMPORTANT] THIS MODEL HAS CRITICAL ISSUES! I RECOMMEND PRINTING Sturmtiger tank, modelled to the one in War Thunder (stowage, details, etc. look exactly the same). It has the Raketenwerfer inside it, and the crane is meant to be glued…

Downloads
427
Likes
33
Rating
0
P
PrintablesLorenzo Petrini

Ipad pro 10.5 mount + .f3d for Flexible & sturdy phone arm

There wasn't a mount for a tablet, so i created mine. This is specifically made for the ipad pro 10.5, but i added the .f3d file so you can easily modify it to adapt to your tablet dimensions. I suggest you make the arm distance 3 mm…

Downloads
423
Likes
89
Rating
5
P
PrintablesNormakeR

Sturdy can crusher

I have used Thingiverse Shuflie's design to crash several cans, but preferred to go for something more sturdy building upon his model. No artistic elements, just functional. Redesigned based on the original STLs in Fusion 360. Sharing…

Downloads
418
Likes
42
Rating
5
P
PrintablesJulius Curt

Sturdy Handle

A sturdy handle that can be fasten with 2 screws. Distance between holes is 18cm. Prints without supports on its flattened side. I needed it for the lid of an old vacuum cleaner.

Downloads
411
Likes
162
Rating
5
P
PrintablesFormiilo

Pasture Fence (N Scale)

Really simple and quick-printing pasture fence in n-scale (1:160). I used it for horse pastures and a shepherd with his sheeps. Personally, I particularly like a two-color print: the print is started with brown filament and a color change…

Downloads
401
Likes
42
Rating
0
P
PrintablesBasementLAB

TETRAHEDRAL MOUNTING BRACKET - Sturdy - Up to 9 Points Fixing Bracket

TETRAHEDRAL MOUNTING BRACKET - STAFFA TETRAEDRICA Flexible Fixing Grid (Up to 9 Points) | Filament-Optimized Design --- ## 📐 Product Overview - Dimensions: 60mm x 60mm (Base) - Mounting Points: Grid design with up to 9 available fixing…

Downloads
401
Likes
271
Rating
5
P
Printablespops

Do Not Disturb Door Sign

This is for personal use only. You cannot sell them. If you would like to buy a license to sell them (eg. Etsy, Shopify etc) or if you are a hotel or other business that would like to use this please contact me. Modern design for door…

Downloads
400
Likes
59
Rating
4
P
PrintablesBasementLAB

Sturdy Corner Bracket - Ribbed - HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile

Sturdy Corner Bracket with Ribbed Reinforcement – Heavy Duty For 2020 / 3030 / 4040 / 5050 V-Slot & T-Slot aluminum profiles Why this model Most commercial corner brackets for aluminum extrusions are either oversized, expensive, or both.…

Downloads
395
Likes
74
Rating
5
P
PrintablesCeleste

Sturdy blank 1U ventilation panel for 10 inch rack

------------------------------------------------------------------------------------------------- UPGRADED PARTS INCOMING! I've done my own fair share of testing with this part, and I figured a major redesign might improve it a lot:…

Downloads
394
Likes
43
Rating
5
P
PrintablesStaindk

Sturdy Toothbrush Travel Holder

Quick demo showcasing the holder: Details: This case is made to fit a chonky “Colgate 360 Sonic Power” electric/vibrating toothbrush - so it should fit most other “normal” type manual toothbrushes as well. After my old toothbrush broke…

Downloads
384
Likes
109
Rating
4.71