223 models
This is a model of a medical linear accelerator based on the “Halcyon” Unit marketed by Varian Medical Systems (Palo Alto, California). Medical linear accelerators are large and highly sophisticated medical devices that emit focused beams…
This storage system for big small pliers or other tools has space for up to 4 parts and its an accesory for "Brunos - Tool Storage System)- It fits with his holders easyly in the wallmounted modules. I have made also a holder for small…
Description: Introducing an innovative solution for pet lovers and organizers alike! These 3D-printed connectors are designed to enhance the flexibility of the Relaxdays shelving system. Originally crafted for a rabbit enclosure, these…
My home as several Mortise-Mount Pilaster style built-in bookshelves and I thought it might be fun to try to design the support clips as my first TinkerCAD project. The model is based on these 239 Series Steel Shelf Clips manufactured by…
I had the original holder for my microphone break, so I made a SKADIS-based mount for it. The microphone itself is a Hama 21671, but many other microphones share the same standard. The mount uses the same upper parts (clip, screw and nut)…
In onze kelder is er steeds wat vocht aanwezig, nu kan ik het opbergsysteem met voetjes op de vochtige vloer zetten. There is always some moisture in our basement, now I can put the storage system on the damp floor with feet.
Gun inspired by Cyberpunk 2077 poster and real guns (Colt, Berett, CZ 75 Shadow Line). There is enough space inside for electronics, to add red and blue LEDs to the right side. Plus has movable parts, where rubber bands need to be added,…
To demonstrate how simple and multiple chain hoist/pulley block work we need to have one or more pulleys. A functional single or multiple pulley is the result of this project. It can demonstrate the transmission of forces and weights in…
Introduction: ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum. Find out more about…
This model is a bidirectional cable chain based upon the igus Triflex series energy chain. These are used to wire up rotational systems where the cable cannot be routed through the center of the axis of rotation. An example use case would…
To demonstrate how simple and multiple chain hoist/pulley block work we need to have one or more pulleys. A functional single or multiple pulley is the result of this project. It can demonstrate the transmission of forces and weights in…
Contributo ai vari sistemi fanduct VzBot in abbinamento con i sistemi Klicky Probedi Jlas1 e Quickdraw di Annex effettuando delle modifiche in modo che i due sistemi si fondono in un unico componente. I sistemi sono stati testati su…
A convenient Top filament guide for printer with direct drive system: The ball can rotate in any direction, this prevents the filament from bending, the hole is designed for PTFE tube insertion (8mm), for better sliding. Print Settings…
Although I've been very happy with my original snap in adapter (https://www.printables.com/model/297396-ssd-to-hdd-adapter), it will not work for slot mount or any system with a stationary SATA connector. This adapter was specifically…
A jam proof pulley for antenna or other projects. The hing mount and the pulley mount have a matching diamond interlock that allows the pulley to be mounted in one of two orientations, depending on your needs. There are also mast top…
Company logo of the fictional company "Cyberdyne Systems". Known from the Terminator movies. For multi-color printing, the filament needs to be changed after each color.
Bought my first PSP 15 years ago and still use it today, but the batteries are obviously not working anymore. There are a few tutorials showing how to mod a bigger LiPo pouch into a PSP by removing the UMD drive, but I had plenty of 18650…
Mount your Neptune Systems Trident & Trident NP to a vertical surface. Usually the vertical panel of an aquarium stand or a wall. There are 4 variants and 1 optional part. Only print out the piece(s) for the variant you want. Two piece…
Mushies Footpads for Onewheel XR - VOW systems. All credits to VOW systems
Can work with 21700 18s2p configuration Lid must be CNC'ed
Basic cover for A5 sized disc-binding systems. You can use your favourite modeling tool to emboss something into (or through) the cover for specific designs. This is just a basic core template.
Here is a Tilt-Shift Adapter that can be configured to attach Canon EF or FD lenses to an EOS-M camera. Old FD lenses will allow to select the f-stop. EF lenses will have wide open aperture and the adapter allows for detailed control of…
These parts were designed for use on an iDoo 12 desktop hydroponic system, but should work with any systems using 30mm/1.18" holes. Algae Blockers (no more stickers) These reusable algae blockers replace the single-use stickers that are…
The modell is from scratch It does not fit the System saddle but the wagon can be pulled with. Realistic shape NEEDS to be CLUued together. the Only Plugs in at horizontal position. the parts are printed in PLA with 0,3mm Layerhight and…
Skynet - Cyberdyne Systems Corporation, License Plate Frame, Terminator Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
Remix of Yanev's parametric toolbox to store consumables for my crossfire pro plasma cnc. The consumables this is designed to hold are for the Razorweld 45 or Hypertherm Powermax45. Part numbers are listed below I resized his box to fit…
Your printer might become self-aware. Use at you own risk.
This is a remix of a remix. The CR920 Fits the Glock 43 stand, so I started there. This is also my first remix, so it may be total trash. Hopefully it works well for someone else. It worked for me :-). Original -…
Fits 3rd generation Toyota Tacoma in the engine bay right next to the existing fuse box. This was designed for the Blue Sea Systems 6 circuit ST Blade ATO/ATC Fuse Block and 187 Series Panel Mount circuit breaker. MUST be printed with ABS…
After buying my Trident I wanted a way to mount it in my very space limited Red Sea E-170 cabinet. This is what I came up with. The wedges are for 8mm glass. If you need a different size, please feel free to remix it as needed.…
A case for a digital hygrometer for replacement of the "Passive Humidity Indicator Paper" in the Chitu Systems filament dryer. Suitable for the widely available and cheap hygrometers, e.g. at AliExpress . Parts: Front housing (with…
This 3D printable Radiator Bleeding Tool is a compact and reliable key designed to release trapped air from radiators, ensuring optimal heating efficiency and comfort in your home. The model is engineered with durability in mind – perfect…
This is a 3D printed torch shield for the Langmuir Systems Crossfire CNC plasma cutter that uses a Hypertherm machine torch. It includes a holder for 2 inexpensive line lasers that will aid in material positioning under the torch. The…
If you're a Maladum player, you know that the game is amazing, but it's also got a LOT of terrain pieces, especially once you buy all the expansions alongside a few of Battle System's other terrain kits. So, to help rectify this chaotic…
This custom-designed end cap fits perfectly on the PTFE tube included with Polymaker's PolyDryer kit. Keep moisture out and protect your dried filament with this easy-to-print, functional plug. The cap features a precise fit with an inner…
Chitu Systems Resin 3D Printer Mini Heater-Versatile Temperature Control Heater Support. You need 4 M3x4 hot inserts and 4 M3x10 screws. First pass the cable through the two pieces, fix everything to the cover and finally position the…
This adapter is specifically designed to connect pipes with different diameters in exhaust and ventilation systems. It ensures a tight and secure fit, providing efficient airflow while being easy to install. The sturdy design makes it…
Base, inverted handle grip and grip to lock in place
Design for a friction fit cover for the Blue Sea Systems 250A Bus Bar Cover. Can most likely fit other bus bars and terminal blocks as well. Covers 5/16' studs…
One component on each side. Used to push the building plate during circulation. We use PLA+ for printing. This model needs to be supported by the tree structure.
The ball can rotate in any direction, this prevents the filament from bending, the hole is designed for PTFE tube insertion (8mm), for better sliding. Remixed because of using it on CR-6 SE. Thanks to MUCC’O. Supports: Yes Resolution:…
This is the hook for the building plate. The base plate needs to be drilled manually and then installed with two M3 screws. Note: You can screw the screws into the holes first, then unscrew them and install the building plate. We use PLA+…
Neptune System Multicolor Logo print - Apex Controllers for Aquariums Print instructions Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: any PLA, ABS & PETG - Notes:…
*** You are doing me a big favor by clicking the Like button :-) *** 45 degrees holder for Ajax GlassProtect
Corner Brackets for Profile Systems Enhance your projects with our versatile 3D-printable corner brackets, designed to fit a wide range of aluminum profile systems. These brackets are available in four sizes: 30mm x 30mm 35mm x 35mm 40mm…
Laser adapter for a Langmuir Systems Crossfire Pro CNC plasma table. Includes Ruggeduino laser controller schematic. Controller used is an industrial Arduino UNO from https://www.rugged-circuits.com/ The enclosure I used:…
This is a customizable model that can be used to create handles that provide an improved grip for handheld retro gaming systems. Instructions for customizing the model are in the comments within the SCAD file. I have also included STL…
A simple lid to plug empty 2inch Netcup holes in a Hydroponic System to prevent algae growth. Can be printed in any non-transparent material.
Pistol-style handle to use the 3D Systems Sense 3d Scanner family with Skanect Software, which assumes a different orientation. I use the OpenNI2 Drivers to use this scanner with Skanect. (The 3D System Sense Scanner is just the Intel…
Filament spool V2.0 for 3D printingmaterials. Ideal for dehumidifying through large side openings. Specially shaped holes that prevent filament from unwinding on its own. Special openings for filament are made in such a way that the…
Printable Rod Stoppers that use M3x5x4 heatset inserts and a 20mm M3 screw.
My second attempt at re-creating a track handle from the Old Days.
EDIT: few mounth since it's in the rack, few thousands km, lot of gigs and still as good as new (thanks to PETG). I just replaced the central 3d piece with a strip of stainless steel collar. It goes through the whole length of the 19"…
Overview Bring a touch of the warehouse to your workshop or office! This Gridfinity Pallet is a purely aesthetic addition designed to tie your desk organization together. I originally designed this to make my desk-sized pallet racks look…
The pegs are tested on the IDOO IG302 but should fit similar systems. The pegs fit into the holes for plant labels/tags. They should help reduce light bleed into the reservoir and reduce algae growth in the nutrient solution. Single pegs…
Simple mount to reuse your existing adapters for antennas in standard d-type mounting situations, e.g when mounting two transmitters with LD Systems U500 RK 2 or similar. The opening has some room and due to the plastic the adapter might…
For use with Ambrosia Systems Nightrider: https://www.ambrosiasys.com/our-products/blucon/ This arm band uses the elastic and velcro bands from the Scosche Rhythm+ and Rhythm24. You can purchase the replacement arm bands for under $20US…
🇺🇸 🇳🇿 🇨🇦 🇦🇺 🇬🇧 Stand for Standard Reverse Osmosis Systems 🇺🇸 🇳🇿 🇨🇦 🇦🇺 🇬🇧 A simple stand to position a reverse osmosis system vertically, saving space without the need for permanent installation. Most systems already include the…
Drilling holes for the A1mini building plate. Place the part under the building plate and align it with the bottom right corner. Then turn them over and drill holes by this part.
Praktischer Adapter für gängige Cerealboxen zur Filamentlagerung Dieser Adapter ist speziell für die weit verbreiteten Cerialboxen ausgelegt, die oft zur Aufbewahrung von Filament genutzt werden. Die seitlichen Öffnungen links und rechts…
📦 Ajax Systems Wall Mount Adapters MotionDetect Corner Adapter + MotionCam Outdoor 45° Wall Mount 🧩 Overview This upload contains three custom mount adapters designed for Ajax Systems detectors: 1 MotionDetect Corner Adapter Angled corner…
A zero support wye/tee fitting for 4" duct systems. designed to print without supports! You'll need a brim, though, because there's very little contact area on the build plate. it's 4" OD, so the duct slips over it. I printed in both ASA…
All Spool Solution This board allows you to use filaments from other manufacturers. To use it you will have to mount the adapter on the machine using the two existing bolts, insert your old filament cartridge chip on the provided pen…
These models are sized for the Molicel P42A, so you may have to adjust the tolerance for other cells. The parametric Fusion360 model can be used to make any size of glue guide for any size of cell.
Chitu Systems Hoopat x4 film PFA ACF for Laser laser cut your own release film for your hoopat x4 vat
A little Adapter for 2inch Netcup Hydro-,Aqua-,Aeroponic Systems. It enables the direct use of this Rockwool-holder: https://www.printables.com/model/65737-rockwool-cube-holder for easy growing from seed to finish. I designed that part…
A complete wall organizer for the terrain packs from Battle Systems and Maladum, fits the whole content from Maladum and have space for some other packs. The design was made with the intention of fitting into almost any filament box, for…
I designed this to add a degree of impact protection to my Langmuir Systems XR Plasma Torch Table wireless controller. I used Prusament filament (galaxy black) which I highly recommend. For higher temp stability, try an ASA filament, or…
What it is: A simple handle with screw holes for easy gripping of your SSD/HDD. Printing Instructions: IMPORTANT: MAKE SURE YOU MEASURE THE THICKNESS OF YOUR SSD/HDD. Two options are provided 7 and 9mm thicknesses. 0.2/0.3mm Layer height…
For electrical tape (or Teflon tape???) spools with a 38mm inner diameter and 20mm width. 3M spools of electrical tape in North America seem to use this diameter (although I do appreciate having smaller reels with more tape….wonder why it…
This is an overbuilt jumper wire holder that seeks to contain the mess. All other solutions I was seeing were Gridfinity, but I really wanted a vertical solution. The wires stay put very well and don't jump out, and it's very easy to…
Original SVG included, as well as Fusion360 files. OM Systems logo can be added to PrusSlicer Part Gallery for easy addition to any print. Hotshoe is a remix of my Panasonic hotshoe, EM1.1 has accessory port that needs covering as well.
Simple desk stand for reagent bottles of Beckman Coulter AU and DxCAU clinical chemistry analyzer systems. It has six positions and is able to hold 60, 30 and 15 ml bottles. 60 ml bottles fit best. 30 and 15 ml have some wiggle but the…
Check out our corresponding Y axis linear rail mounts for the light weight carriage! https://www.printables.com/model/274222-tac-01-bed-leveling-wheel-clips-for-light-weight-m Read more about them on our website…
There is a great open source project by shining-man on github: https://github.com/shining-man/bsc_fw Please support the developer of this project: Paypal: https://www.paypal.me/shiningman11 This is a 200x140x43mm case. I added an…
Neptune Systems Apex Module Mount
Please be aware that if you put this on your machine, there is a possibility that the laser print head will hit the rotary. Before trying your design, please make sure this will not happen at your set angle. The rotary tool on my local…
A pegboard fitting for storage or organization of thin things like clipboards, notepads or notebooks, etc. The photos say more than anything I could write here. Part of what makes this work is a 90 degree curved set of top pegboard mount…
This is my keychain model of the Chi Battery Systems logo…
AntiHunter Perimeter Defense Systems, DIGINODE 2.4Ghz (Original Enclousures) PCB store: https://www.tindie.com/products/teamantihunter/antihunter-digi-24ghz-wifible-node-pcb-only-2/ Follow me: https://x.com/SirhaXalot_ Follow Luke:…
YOYODYNE PROPULSION SYSTEMS, THE FUTURE BEGINS TOMORROW. Print Settings Printer: Fusion3D Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Category: Signs & Logos
These are the components to print a replica of a rocket that was made and flown last year as part of a class in school. You can print it full scale, however, the body tubes would probably be better off being made of the actual blue tube…
Powerbox Systems offers a softbag for their Core/Atom radio transmitters. The softbag has a foam insert with a number of recesses in which smaller accessories can be stored. The inserts provided here fit exactly into these recesses and…
Simple pass-trough for Ikea LACK-tables. Allows movement of the tubes and holds in place with magnets while printing. I used M4 screws to fasten the models on LACK. You can edit the step model if you want to use simply glue without…
Voltaic Systems Solar Panel Holders
After looking further into the Axolote Hex tile and wall system I really gained an appreciation for all the hard work that went into this set. They are highly detailed and the base set includes a bunch of stretch goals that really add a…
Small intro M7 PRO came up with some questionable gimmicks, like vat with resin heater that kinda uncomfortable to clean after print (despite cleaning mode), and resin feeder that have risk of resin contamination. I decided to go with…
Adapter for the Chitu Systems E1 I can’t get the humidity lower than 24%
These are 1.5"spacers for the Wilderness Systems Kayak cart just in case you want to install balloon tires on your cart because they are rubbing your yak. These things list for $70 to &80 online and I wasn't paying it. You will need (4)…
This is a 2 sided holder for TL-SG105 units, that makes them compatible with Wakoma Nimble racks
A bezel to cover any gaps around a through hole mount of a Blue Sea Systems e-Series switch. Should fit the following Blue Sea Systems e-Series switches; 11001 - Selector 3 Position 5510e - Dual Circuit 5511e - Dual Circuit Plus 9001e -…
Self powered (stand alone) DJI FPV pod for that could be used for various projects. Shown here with a mount for the Quantum Trinity F90+. To be used with my quick release DJI Vista/Nebula Pro Nano pod:…
This is a drain strainer for the Schluter Kerdi-Drain 4 in. Drain Grate (Design 1) . I have the oil rubbed bronze version , but it should also fit the stainless steel version , as well as the chrome version , etc. UPDATE (2020/06/10): I…
Small felt puffer leg with click for Ikea Algot frame systems
Watering nozzle fits a standard garden hose. This is a reduced size of my larger one for use on water systems that have limited pressure and flow. I have a larger design on “Printables” for more typical water systems named " Gentle High…
This is a breakout box to give further function to the Neptune Apex. The box is designed to hold two momentary push buttons (I use these for feed cycles and skimmer clean) two on/off switches and if desired two 5mm jack ports, which can…
A spherical housing is ideal, because it is very stiff and has no internal reflections. You can use it with GT Power chassis or these 40mm, 4Ohm, 10w chassis from eBay: https://www.ebay.com/itm/123532778305 Sound controller:…
EDIT 2: doesn't seem to work currently with L. Or at least mine; the hole placement seems off. EDIT: Also works with the Official Advanced Filtration System that Prusa sells; putting this between the AFS and the machine will allow you to…
