Search results: t9

Sort order

Counting matching models…

P
PrintablesAinon3Dtisk

Footrests for RC car RMT T98 Land Rover Defender

Hello, I have for you Footprints for RC car RMT T98 Land Rover Defender 1:10, 1:12. Footprints have a place for one canister on each side. The canister is also included, which is in the picture. The footprints are slide-on to hold, no…

Downloads
58
Likes
8
Rating
0
P
PrintablesAinon3Dtisk

RC T98 Land Rover Defender shock absorber shims

Hello, Welcome to my profile, full of models and miniatures :-) I have for you RC T98 Land Rover Defender shock absorber support. Raises the car by at least 10mm!!!...the lift is really noticeable and the car is also more stable. It…

Downloads
36
Likes
9
Rating
0
P
PrintablesGuyzerr

XT30 XT60 XT90 Solder Assistant

Files for the XT30, XT60 and XT90 are now here…. EDIT: 8/10/22 Created the parts with raised letters. Mark them with a felt pen to make them easy to stand out. I got tired of fighting to keep the plug and wires in place while soldering…

Downloads
1,693
Likes
217
Rating
4.94
P
Printablesmilanvdzanden

T95 tank

a model of the T95 tank, its really hard to print, so its better to make it smaller. Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.3 Infill: 30% Category: Vehicles

Downloads
1,443
Likes
141
Rating
4.5
P
Printablesorangepiweb

T95 Tank

Based on a 3d model. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.06 Infill: 25% Filament: --- PLA Black Category: Vehicles

Downloads
1,108
Likes
98
Rating
5
P
PrintablesDrew

XT Battery Cap XT30 / XT60 / XT90 Cap

This is an XT30 / XT60 / XT90 Cap, it fits over the female side (battery side) of lipo batteries. It has a small lip on the bottom to make it easier to pull apart. Should fit snug. I use these to determine if the battery is charged or…

Downloads
640
Likes
36
Rating
4.38
P
PrintablesLuKowalski

XT60/XT90 connector soldering tool

XT60/XT90 connectors are often used from model builders to connect LiPo batteries to the receiver system, electric engines or the control units and starter motors of jet-engines. With this tool the wires are aligned with the connectors…

Downloads
591
Likes
201
Rating
5
P
PrintablesHyperbeam

Beyerdynamic Hinge Slider Replacement/Upgrade for DT770 Pro, DT770 M, DT990 Pro, DT990, DT880, Custom One Pro Plus, TYGR 300 R and MMX300 MK2

Beyerdynamic Hinge Slider Replacement/Upgrade for DT770 Pro, DT770 M, DT990 Pro, DT990, DT880, Custom One Pro Plus, TYGR 300 R and MMX300 MK2

Downloads
569
Likes
17
Rating
5
P
Printables3D-Muc

XT90 plug holder mount

This is a holder for xt90 plugs The plug is inserted from the front and can be glued in One version is with hole, but it saves only 1 gram i use the holder in a model airplane Category: R/C Vehicles

Downloads
567
Likes
70
Rating
4.33
P
PrintablesKen226

DeWalt DCST922 Weed Eater, String Trimmer Wall Mount

I created this to keep my DCST922 string trimmer up on the wall. It can be hung with the trimmer folded, facing either direction. The screw holes accept #9 pan head screws, or pretty much any similar size wood screw. I printed mine with…

Downloads
495
Likes
41
Rating
5
P
Printablesm_a_CAR

Pente 3mm T9 / Comb to hair trimmer with 3mm height.

Projetei usando freecad, pente para corte de cabelo com altura de 3mm, para máquinas t9. 28/10/23 adicionado .step 28/10/23 adicionado .FCStd 31/10/23 adicionado versão com otimização de suporte e suavização de cantos .stl

Downloads
440
Likes
32
Rating
5
P
PrintablesL340

XT90 Panel Mount Unisex

Utilizes ribs on XT90 connector for fixation. You'd need to apply some force to press in XT90 into this panel mount. I recommend to use vice. Printed in PETG, 0.4mm nozzle, 0.3mm layer M3 Conical - conical head bolt/screw Plain - plain…

Downloads
395
Likes
41
Rating
0
P
Printablesbj

XT90 round panel mount

I wanted a screw-on xt90 panel mount but couldn't find any free models so I made my own instead of paying the eBay tax(eff those bitches). The idea is that as you screw the nut on the mount clamps onto the connector more but that doesn't…

Downloads
375
Likes
40
Rating
5
P
PrintablesAirwaves Ted

XT90 Plug Safety Cover

XT90 Charged/discharged battery indicator protector caps I print 3 colours and use the blue for battery packs at storage charge. I've only printed in TPU Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…

Downloads
355
Likes
20
Rating
3.67
P
PrintablesMaverick0197

Alientek T90B Rugged Case

Alientek T90B Rugged Case I was in search of a carry case for my T90B and couldn't find one but very much liked the design by @EddieCoast for the Pinecil V2.| After taking inspiration from him and several others (see the remix links), I…

Downloads
346
Likes
49
Rating
5
P
PrintablesLief Erikson

Classic playing cards full deck 54 with options AKQJT98765432 + joker

Classic Playcards deck of 54 with options CARDS Standard 52-card pack, ranking AKQJT98765432 + joker Diamonds Hearts Clups Spades 2 3 4 5 6 7 8 9 10 Jack Queen King Ace Joker Use your cards wherever you want since they are waterproof when…

Downloads
316
Likes
52
Rating
5
P
Printableskashography

Removable Cupholder for Emmaljunga NXT90

Going for a walk with the kid(s) is nice. Being able to bring your morningcoffe or tee with you, priceless! The cupholder is designed in two pieces: The holder - clips in place and secures itself on the frame with a hook on the existing…

Downloads
302
Likes
21
Rating
4.5
P
PrintablesAlexey H

xt90 male protective cap

xt90 male connector protective cap has a convenient hole to be able to tie it to the wire so you will not lose it As connectors are slightly different, you may want to scale a bit (0.5-1%) to fit your exact xt90 male plug

Downloads
294
Likes
22
Rating
0
P
Printablestovitas

T9 Hair trimmer guards

Remix model from m_a_CAR Versions for 6.5, 7, 7.5, 8, 9, 10mm guards. Printed with PLA due to layer adhesion issues with my PETG Filament. So I designed versions with easier layer adhesion by adding a 0.25mm layer. However the model…

Downloads
291
Likes
22
Rating
0
P
Printables3DSistem

XT90 Protective sleeve

Tight fit for both M an F part.

Downloads
269
Likes
22
Rating
0
P
PrintablesKöter

XT90, XT60 safety caps

Here you find a few safety caps for the XT-battery-connectors. All of them are printed with TPU (Shore 95 or 90). You need a cable tie to attach it to the cable. Happy printing!

Downloads
240
Likes
23
Rating
5
P
PrintablesWindham Graves

US T28 (T95 GMC) Super Heavy Tank easyprint

Come support these models over on Patreon Buy my time, Not my models. Easy to print T28 super heavy tank "Doom Turtle", 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. This is a…

Downloads
240
Likes
24
Rating
5
P
PrintablesAdam 3Z6MA

Anytone AT-778UV / Retevis RT95 side rails - basic by 3z6ma

I haven't printed this model yet. I'll update this section as soon as I print/got this printed. Length: 250mm Height: 50mm

Downloads
239
Likes
20
Rating
5
P
PrintablesMike

CT90 K2 and Later Rear Air Filter Housing

This is the rear air filter housing that should fit K2 and later CT90's and maybe CT110's.

Downloads
232
Likes
11
Rating
5
P
Printablesr0st

RST99 - 9.9L SFF ITX PC case - 240mm AIO - magnetic panels

RST99 – 3D Printed SFF ITX PC Case A compact, fully 3D-printable Small Form Factor (SFF) PC case designed for high-performance hardware in a minimal footprint of just 9.9L. RST99 compatibility: Mini-ITX motherboard SFX PSU 240 or 120mm…

Downloads
230
Likes
98
Rating
5
P
PrintablesTechnoVardo

Bumpers/ears for FT991A

Pretty much self-explanatory. Attach to the side of a Yaesu FT991 to protect the knobs and rear panel connectors and give the radio a more solid footing. Uses four (4) 4mm x 20mm flat head screws. If you have a large enough printer, print…

Downloads
218
Likes
18
Rating
0
P
PrintablesGeox

Hair clipper/trimmer 8mm comb T9 model

Would recommend to print in PETG as PLA tends to creep and loose the clamping power. At least 2 walls. SUPPORT NEEDED! Post your print and recommend any changes that you see fit

Downloads
209
Likes
67
Rating
0
P
Printables_cybermouse_

XT90 panel mount

Simple XT90 connector panel mount bracket. The connector is soldered to a PCB which was made on a small CNC machine. Parts were printed in PETG. If you build this please share a make, you can also tag me on instagram @_cybermouse_

Downloads
205
Likes
32
Rating
0
P
PrintablesKen226

DeWalt DCST922 Weed Eater String Trimmer Wall Mount, folded only

I modified my earlier version to more closely resemble my other DeWalt wall mounts. The screw holes accept #9 pan head screws, or pretty much any similar size wood screw. I printed mine with PLA @ 20% infill, and using Prusa Slicers…

Downloads
183
Likes
16
Rating
0
P
PrintablesAndrey

Alientek T90B Rugged Case

I modified this storage case for the Alientek T90B soldering iron and its accessories to better suit my own needs. Some of the original compartments and features were not useful for my setup, so I redesigned and replaced them with…

Downloads
175
Likes
28
Rating
0
P
PrintablesDre9k

Innorel RT90C tripod leg spreader for ZWO PE200 pier extension

This leg spreader for the RT90C tripod is designed to work in conjunction with the ZWO PE200 pier extension. It consists of two parts: the spreader and a bracket for a M10 hex bolt which prevents the bolt from spinning and allows for easy…

Downloads
173
Likes
8
Rating
5
P
PrintablesBc3d

XT90 connector cover male & female

XT90 male and female connector covers with loop

Downloads
172
Likes
20
Rating
5
P
Printablesdgardner

Amateur Radio Retevis RT95 50 Cal Go Box

Mounts a Retevis RT95 25 watt Dual Band VHF/UHF radio in a metal 50 caliber ammo box with batteries and an antenna. It is a totally self-contained high watt go-kit. Features include: Fits four 6Ah LiFePo batteries for a total of 24Ah of…

Downloads
172
Likes
45
Rating
0
P
PrintablesDre9k

Innorel RT90C Tripod Plate Adapter for ZWO AM3/AM5/AM5N/PE200

This adapter allows ZWO AM3, AM5, and AM5N mounts and pier extensions to be securely mounted on Innorel RT90C tripods. Using this adapter, the mount or pier won't spin on top of the plate. This adapter works well in conjunction with…

Downloads
167
Likes
6
Rating
0

XT90 Male Plug

Used to plug the male side of an xt90 connector. Includes grip to more easily pull the plug out too. No supports or anything needed, tolerances are +- 0.2mm but model has been tested and can accommodate a lot of variation and still…

Downloads
166
Likes
12
Rating
0
P
PrintablesPrusa Research

HT90 printable parts

All printable parts for your Prusa Pro HT90. Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: STRENGTH profile Filament: PC Blend 25% Grid infill ** Note that print settings are…

Downloads
162
Likes
43
Rating
0
P
PrintablesGeox

Hair clipper/trimmer 6mm comb T9 model

Would recommend to print in PETG as PLA tends to creep and loose the clamping power. At least 2 walls. SUPPORT NEEDED! Post your print and recommend any changes that you see fit

Downloads
157
Likes
18
Rating
5
P
PrintablesTux

T90 Torx Tool

I needed a T90 Torx tool to change the desiccant cartridge on a Smart Fortwo (451) EV battery. It's a seldom used tool because the desiccant cartridge is replaced every two years. The German made T90 Torx on McMaster is $100+ and I don't…

Downloads
157
Likes
9
Rating
5
P
PrintablesAcesEighty8

KJW Cybergun Taurus PT99 Compensator

Just a fun thing for the gun. With rail for attachments. Print Settings Resolution: 0,16 Infill: 10 Category: Other

Downloads
147
Likes
13
Rating
0
P
PrintablesTapap

Fan stand for Inovato Quadra or T95 Mini

Stand and enclosed fan shroud for Inovato Quadra. Air intake is from the slotted ports on the sides. Bottom hole is to allow for tree supports for ran roof. No other supports required if you know you can handle the curved overhangs on the…

Downloads
138
Likes
11
Rating
0
P
PrintablesAyhxmDev

T95 Tank

Based on a 3d model.

Downloads
137
Likes
15
Rating
0
P
PrintablesLauf

Emmaljunga NXT90 cup holder

The model exists of two pieces. Forst print the clamp on mount. See print orientation in picture 3. Next print the cup holder. It is important to add a pause to the gcode before printing the ceiling of the cup holder slot. See picture 2.…

Downloads
134
Likes
15
Rating
5
P
PrintablesTDCN

Tefal Steamer Wall Holder DT9100

Simple wall mounted holder for the Tefal DT9100 steamer. Would probably also fit similar Tefal steamers. Remember to mirror the part if you want the steamer to face the other way. IMPORTANT: The pictures and the presliced gcode is…

Downloads
134
Likes
11
Rating
5
P
Printablestlamp

Prusa PRO HT90 High-Temp Profiles

The HT90 has a very disappointing lack of print profile presets for the High-Temp toolhead. This led me to create what was missing to make it easier for my co-workers to quickly start prints. PEEK profiles are also lacking as there is…

Downloads
131
Likes
19
Rating
0
P
PrintablesMike

A CT90 K0 Air Intake Boot

This is an air intake boot for a CT90 K0 printed using TPU

Downloads
131
Likes
8
Rating
0
P
Printablestoaster

Beyerdynamic DT990/DT770 pro slider houseing

This is a replacement for the DT990 slider housing that I modeled after mine cracked. Beyerdynamic offer a replacement part for sale but I didnt want to pay as it was simple enough to model. Print both sides with the flat face down…

Downloads
130
Likes
5
Rating
0
P
PrintablesHI

T9 - Dummy 13 companion (BETA FILES)

This model was directly designed from scratch and is compatible with the dummy 13 We're finally in beta! Most problems are fixed, but there might still be some minor bugs. Disclaimer Please keep in mind that this model is still in beta…

Downloads
129
Likes
65
Rating
5
P
PrintablesMike

Fender Plugs that can be used on a CT90

These are Fender Plugs that can be used on a CT90 and printed using TPU

Downloads
128
Likes
5
Rating
0
P
PrintablesMike

CT90K1 Carb to Air Filter Holder Boot - For Newer 2 Screw Carbs w/32mm Intake Opening

This carb to air filter holder boot is designed to be used with Honda CT90K1's that have incorporated a newer 2 screw carb with an intake opening of approximately 32mm. This has been printed with TPU which provides enough flexibility to…

Downloads
125
Likes
8
Rating
0
P
PrintablesAron_Tinker

3d printed compact DIN Rail mount for RUT2xx, RUT9xx

3d printed DIN rail mount for Teltonika routers. Print with original orientation for maximum strength. Compatible with : TELTONIKA RUT200, RUT240, RUT241, RUT300, RUT360, RUT901, RUT950, RUT951, RUT955, RUT956, RUTX08, RUTX09, RUTX10,…

Downloads
124
Likes
6
Rating
0
P
PrintablesTiko

VGA controller XY-W58CDT9-AV7 case

Simple box with sliding lid. No supports. Model name optional, but can be printed with a different colour.

Downloads
124
Likes
3
Rating
5
P
Printablesblissfulpigeon

Lancer EVO CT9A Ashtray 52mm Gauge Mount

Layer height 0.2mm Infill density 10% Gyroid infill Normal supports / snug / manually set over hangs as shown in last picture 3mf file contains a modifier to fuzzy skin, I find that it helps keep the gauge in place and looks nice, can…

Downloads
122
Likes
5
Rating
0
P
PrintablesNikdfish

Radio Handles RT95 AT778UV

Alternative, non-mobile, mounting for radios like the RT95 and AT778UV. Handles make for easier handling of non permanently mounted radios and add a measure of front panel protection. They also provide clearance for bottom mounted…

Downloads
122
Likes
16
Rating
5
P
PrintablesMike

CT90K1 Carb to Air Filter Holder Boot - For Stock 4 Screw Carbs w/36mm Intake Opening

This carb to air filter holder boot is designed to be used with Honda CT90K1's that have a stock 4 screw carb with an intake opening of approximately 36mm. This has been printed with TPU which provides enough flexibility to allow it to be…

Downloads
118
Likes
5
Rating
0
P
PrintablesMike

A 3D Printed Seal for use on a CT90 K2 and Later Air Filter Housing

A 3D Printed Seal for a Honda CT90 K2 and Later Air Filter Housing

Downloads
117
Likes
5
Rating
0
P
Printablesethan4238

TENT PEG RT90 SWISSPIRANHA

The 3D design of an RT90 tent peg combines robustness, lightness, and 3D printing ease to offer a reliable and practical solution for your outdoor adventures. This peg has been meticulously designed to withstand the most challenging…

Downloads
117
Likes
10
Rating
0
P
PrintablesGiovanni1954

ARTE&DISIGN GT92

ARTE&DISIGN GT92 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W

Downloads
114
Likes
17
Rating
0
P
PrintablesRed Haniwa

XT90 unisex panel mount

Couldn't find an Amass XT90 panel mount that had all my requirements so I designed this based on ideas from my previous XT60 remix. My aims for this design: No support needed. Can be used for both Male and Female connector. Can be removed…

Downloads
113
Likes
18
Rating
0
P
Printablessbrownie

XT90 Flexible Cap & Tether

Remixed the XT60 version - I couldn't get it to just scale in my slicer and fit appropriately, and the tether was coming out only one layer thick. The opening was enlarged for an XT90 female connector, and the tether & walls were…

Downloads
113
Likes
18
Rating
0
P
PrintablesAnton

10 XT60 to XT90 Fuesed Power Hub

This is a hub for connecting multiple batteries to an inverter to power your appliances and solar/off grid energy projects. Need a printer with large print bed, something like 300x300mm.

Downloads
112
Likes
30
Rating
0
P
PrintablesRasmus Madsen

Cupholder for Peugeot 308 T9

Description: Upgrade your Peugeot 308's interior functionality with this custom-designed 3D-printed cupholder adaptor. Say goodbye to the inconvenience of having just one cupholder, and welcome a sleek solution that seamlessly integrates…

Downloads
112
Likes
21
Rating
5
P
Printablesjamesharding

Beyerdynamic T90 T70 1990 1770 Pro Slider

A replacement slider assembly for Beyerdynamic T90 and T70 headphones. Looks like it will probably fit T1/T5 and others.

Downloads
111
Likes
4
Rating
5
P
PrintablesSamy

XT60 to XT90

Print the template with organics supports. PLA is good. First weld the two sockets with the template. The best is to use a rigid copper wire. Print the cover in TPU or VarioshoreTPU and glue it. You can have the XT90 to XT60 here :…

Downloads
110
Likes
13
Rating
0
P
PrintablesNaftausa

Samsung T9 SSD MacBook holder

simply stick the holder to the rear of your Mac with double side, insert the T9 Samsung ssd and connect!

Downloads
109
Likes
9
Rating
0
P
PrintablesItsGhost

Motorola T92 H2O KlickFast Stud

A simple KlickFast stud to fit Motorola T92 H2O handheld PMR radios. Fit confirmed with official Peter Jones KlickFast docks. Print settings Orientation: 90º rotation (as screenshot) Material: PETG/ASA (for strength) Nozzle size: 0.6mm…

Downloads
108
Likes
12
Rating
0
P
PrintablesLuis Senz

Prusa Pro HT90 Printsheet holder

A printsheet holder for Prusa Pro HT90. Up to six printsheets. On the picture: printed with black PETG, 15% Infill

Downloads
103
Likes
13
Rating
5
P
PrintablesMagic Aerials

Rekon 10 Pro DJI O3 & O4 Mount - With integrated XT90 and Action Camera Finger Mount

This TPU front-end camera mount for the Rekon 10 Pro frame allows you to mount an O3 or O4 camera far enough forward, thereby removing propellers from view. It also provides an integrated finger mount, allowing you to attach an action…

Downloads
102
Likes
5
Rating
5

HSW DT9205A Multimeter Holder

I slightly increased the width to fit the multimeter in the rubber case and made holes for compatibility with honeycomb storage wall. Also I increased the height for the probes holder. You'll need to print two M3 inserts (included in the…

Downloads
102
Likes
19
Rating
0
P
Printableslnxguy

T95MAX TV Box Case With Heatsink And Fan

I created a case for these inexpensive reflashed TV boxes, to use as a replacement for unobtainable Raspberry Pis. The only parts needed are a 4010 5VDC fan and a 40mm heatsink. With this setup, the CPU never gets above 70 degrees C or…

Downloads
99
Likes
7
Rating
0
P
PrintablesDavid

SL1S Tank FEP screw T9 key aligner

A tool to help you align the T9 key when replacing a FEP foil on your SL1S resin tank. Other than that, the #1 advise for a painless FEP replacement is: get WERA 05028032001 TX8IP screwdriver. ____________ Printable on both MSLA and FDM.…

Downloads
97
Likes
15
Rating
5
P
PrintablesHannibal

Peugeot 308 II (T9) DIY center console button panel with OBD socket access

Introduction The original was posted by me at https://www.thingiverse.com/thing:3368589 but this one is a newer one. Models In the folder ‘original’ the files for the original are found. In the folder ‘With OBD opening and cover’ a…

Downloads
94
Likes
21
Rating
0
P
PrintablesMike L

Motorola Talkabout T92 H2O Belt Clip

Motorola talkabout T92 H2O belt clip. Just replace the original black hanger with the belt clip.

Downloads
94
Likes
12
Rating
0
P
PrintablesAinon3Dtisk

RC car RMT Land Rover T98 fill in the doors, windows

Hello, Welcome to my profile, full of models and miniatures :-) I have for you an RC car RMT Land Rover T98 complete with doors and windows. They are suitable for beautifying your RC model. They are in 1:10 scale. No glue is needed for…

Downloads
91
Likes
8
Rating
0
P
PrintablesW141-ID

Toolfree Tensior for Voron 2.4 with Pinmod for GT9

It's based on the chaotic lab model. But I recommend checking out the other remixes as they provide great value.

Downloads
90
Likes
13
Rating
3
P
PrintablesRed Haniwa

Amass XT90 cable cover (sparkless and standard)

Remixed the model with these changes: Make the end larger to accommodate my 8AWG cable which seem to have thicker insulator than other 8awg. Added hex nuts on the other side Make 3 different versions for standard Amass XT90, Sparkless…

Downloads
89
Likes
12
Rating
0
P
PrintablesLukáš Pavlas

Heavy duty phone case for Xiaomi Mi T9 / K20

JEŠTĚ SE NA TOM PRACUJE Jedná se o odolné pouzdro pro telefon Xiaomi T9 / K20 16.4.2020 aktualizace. Pouzdro byo dokončeno osobně asi doporučuji spodní část tisknout z FLEX filamentu ale je možné použít i jiné. Použite šrouby M4x10 ane…

Downloads
89
Likes
9
Rating
0
P
PrintablesRaab6

Mini Track Loader RC Micro Servo SG90 HXT900

I designed this based on the "Mini Track Loader RC" from Zedpi. You can use the lego chain and all the other parts from Zedpi's design ( https://www.thingiverse.com/thing:1000713 ). So it is only slightly larger as the original one from…

Downloads
89
Likes
21
Rating
0
P
PrintablesMike

Hole Cap for use on a CT90

This is a hole cap that can be used on a CT90 and printed using TPU

Downloads
87
Likes
4
Rating
0
P
Printablesowlbob

DT990 Pro Selftap

File redesigned to be used with the selftapping screws of the original DT990 Pro Sliders

Downloads
84
Likes
0
Rating
0
P
PrintablesAinon3Dtisk

RC car RMT Land Rover T98 front bumper

Hello, Welcome to my profile, full of models and miniatures :-) I have for you an RC car RMT Land Rover T98 front bumper. They are suitable for beautifying your RC model. They are in 1:10 scale. No glue is needed to install them, they…

Downloads
80
Likes
7
Rating
0
P
PrintablesTom_R

Honda Trail 90 CT90 Speedometer Gasket

A gasket for a CT90 with the D-shaped speedometer. I used TPU to print it. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Matter Hacker TPU Black Category: Automotive

Downloads
80
Likes
7
Rating
0
P
PrintablesMike

Piston Support for use on a CT90

This is a piston support tool to aid in the reassembly of a CT90 engine

Downloads
77
Likes
8
Rating
0
P
PrintablesSamy

XT90 to XT60

Print the template with organics supports. PLA is good. First weld the two sockets with the template. The best is to use a rigid copper wire. Print the cover in TPU or VarioshoreTPU and glue it. You can have the XT60 to XT90 here :…

Downloads
76
Likes
11
Rating
0
P
Printableslnxguy

T95Mini and Inovato TV Box Case With Heatsink And Fan

I created a case for these inexpensive reflashed TV boxes, to use as a replacement for unobtainable Raspberry Pis. The only parts needed are a 4010 5VDC fan and a 40mm heatsink. With this setup, the CPU never gets above 70 degrees C or…

Downloads
76
Likes
7
Rating
0
P
PrintablesMike

Short and Tall Caps for use on CT90 & CT200 Speedo's

Short and Tall Caps for use on CT90 & CT200 Speedo's printed using TPU

Downloads
75
Likes
3
Rating
0
P
Printables0d7i0s

taurus pt92 stand

The "taurus pt92 stand" is a bespoke stand meticulously designed to cradle the Airsoft Taurus PT92 H.P.A pistol. This stand not only serves as a stable platform for displaying your prized possession but also accentuates the sleek design…

Downloads
73
Likes
7
Rating
0
P
PrintablesAinon3Dtisk

RC car RMT Land Rover T98 rear bumper

Hello, Welcome to my profile, full of models and miniatures :-) I have for you an RC car RMT Land Rover T98 rear bumper. They are suitable for beautifying your RC model. They are in 1:10 scale. No glue is needed to install them, they hold…

Downloads
72
Likes
5
Rating
0
P
PrintablesJacob

Convoy 3X21D Gaskets (SBT90.2)

The bottom hole for the SBT90.2 is 10x11mm, so make sure you place it correctly. PLA not recommended due to 50°C heat deflection temp, starts softening. I use ASA for 100°C HDT, but PETG should be fine for 70°C HDT. Use white colour…

Downloads
72
Likes
6
Rating
5
P
PrintablesVl. B.

XT90 Connector Shroud

I grew increasingly frustrated with the difficulty of separating two connectors, so I went online and could not find anything suitable. Thankfully, there was a model I thought was “halfway there”. Unfortunately, I was not satisfied with…

Downloads
72
Likes
13
Rating
0
P
PrintablesMike

This is a Gasket that Can Be Used on a CT90 K1 Speedo

This is a Gasket that Can Be Used on a CT90 K1 Speedo printed in TPU

Downloads
72
Likes
6
Rating
0
P
PrintablesAinon3Dtisk

RC car RMT Land Rover T98 treads

Hello, Welcome to my profile, full of models and miniatures :-) I have RC car RMT Land Rover T98 treads for you. They are suitable for embellishing your RC model. They are in 1:10 scale. No glue is needed to apply them, they stick to the…

Downloads
70
Likes
8
Rating
5
P
PrintablesAinon3Dtisk

Antenna for RC car RMT T98

Hello, Welcome to my profile, full of models and miniatures :-) I have for you Antenna for RC car RMT T98 Land Rover Defender. Antenna fits beautifully into the original body. It prints quite well I used PLA/PETG Basic material You need…

Downloads
69
Likes
5
Rating
0
P
PrintablesGiovanni1954

ARTE&DISIGN GT93

ARTE&DISIGN GT93 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W

Downloads
69
Likes
26
Rating
0
P
PrintablesAAME

Trampa Monster Box Mk3 XT90 cap

Prevents the connector from filling up with crap. Print it with TPU Print instructions Category: Sport & Outdoors Summary Prevents the connector from filling up with crap. Print it with TPU

Downloads
69
Likes
6
Rating
5
P
PrintablesClamikra

Philips beard trimmer 9000 Prestige BT9810/15 Stand

The Philips beardtrimmer BT9810/15 is a premium device but lacks one important feature - a stand! So when there is no thing I have to design and print it. With this design you get a stand for securely storing your BT9810/15. And you get a…

Downloads
69
Likes
13
Rating
0
P
PrintablesMint Moose

Crossbow Cutter Servo Depressor Arm (now includes FT90M)

This model now includes BOTH mg90s servo and the higher operating temp FT90M servo compatibility! The MG90S mount, arms and entire .step have also been updated. The FeeTech FT90M is the same servo that is used with the Nevermore…

Downloads
68
Likes
39
Rating
0
P
Printablesthatsme

t95 tank

just print it and it will hopefully print well

Downloads
68
Likes
7
Rating
0
P
PrintablesSTUDIO285

Hp t920 T372473 B3 GEARS

GEARS for plotter Hp t920 T372473 B3

Downloads
68
Likes
6
Rating
0
P
PrintablesMike

Front Air Filter Housing for use on a K2 or later Honda CT90

This is a front air filter housing I designed for use on K2 or later Honda CT90 motorcycles. The housing is an assembly composed of the three parts I have included with this model. The upper and lower mounts slide into mating grooves that…

Downloads
67
Likes
3
Rating
0
P
PrintablesEJIEHb

T95 Tank modified for fdm print

optimized for fdm. the model was assembled on the knee: removed small details in the air, voids were removed, tracks were strengthened. v. 2 added holder for radio, reinforcement of the front part of the track

Downloads
64
Likes
10
Rating
0