Search results: tft

Sort order

865 models

P
PrintablesEddy

Case for Adafruit 1.8 Color TFT LCD display with MicroSD Card Breakout ST7735R

This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…

Downloads
610
Likes
22
Rating
5
P
PrintablesDaHouzKat

Original Prusa Enclosure BTT PI TFT43 DIP Case

Compatibility BTT PI TFT43 DIP Raspberry Pi 4 Print Instructions Use Default Prusa Slicer 0.20mm Quality Print Settings Nozzle Diameter : 0.40mm Filament : PLA or PETG Infill : Gyroid 25% Perimeters : 3 Supports Support on build plate…

Downloads
147
Likes
42
Rating
0
P
PrintablesBo.zip

BTT TFT35-E3 V3.0 flat bezel

This is a remix of Andy Barnett's TFT35-E3 bezel from thingiverse: https://www.thingiverse.com/thing:4177691 I flattened the top of the bezel, so its looks nicer. Print instructions Category: 3D Printer Parts Summary I flattened the top…

Downloads
140
Likes
16
Rating
0
P
PrintablesBo.zip

TFT35 ESP01 box

This very simple box allows you to cover the Esp01 Wifi module on the TFT35 screen. Print instructions Category: 3D Printer Accessories Summary This very simple box allows you to cover the Esp01 Wifi module on the TFT35 screen. Print…

Downloads
127
Likes
11
Rating
0
P
Printables5limpickle

Ender 5 Plus TFT35 V3.0.1 Screen Mount

I remixed @Si_Gowla design with tighter tolerances and more attractive aesthetics. It allows quick access to the back of the TFT35 main board. No case mods needed. Filament: PLA Layer height: 0.2mm (knob shroud 0.1mm) Infill: Grid 15%…

Downloads
104
Likes
6
Rating
0
P
Printablestcarnathan

Ender 5 Plus BTT TFT35 V3 External screen mount

External Screen mount for the BTT TFT35 V3 which gives you access to the usb port and SD card on the screen. If this was mounted inside the control box where the original screen was. You would not have access to the usb port or sd card…

Downloads
85
Likes
5
Rating
0
P
PrintablesHamza Mammadli

BTT TFT70 V2.1 Case (Slim version)

This case is for BTT TFT70 V2.1 DSI cable version (Not HDMI) No hardware needed The model has a slim profile and minimal look to it. The case is a tight fit, no screw needed, but if you wish to add some, you can use M2.5 screw holes for…

Downloads
53
Likes
11
Rating
0

2,4 Zoll TFT Display Gehäuse schräg

Dieses flache Gehäuse für ein 2,4" TFT Display Modul wurde speziell für eine saubere und stabile Integration in Elektronik- und DIY-Projekte entwickelt. Das Display kann einfach von unten eingeklipst werden und sitzt dadurch bereits…

Downloads
25
Likes
3
Rating
0

1.8" TFT Display Gehäuse mit Clip & Schrauboption

Dieses flache Gehäuse für ein 1,8" TFT Display Modul wurde für eine kompakte und saubere Integration in Elektronik- und DIY-Projekte entwickelt. Das Display kann von unten eingeklipst werden und sitzt sicher im Gehäuse. Zusätzlich besteht…

Downloads
24
Likes
4
Rating
0

Flaches 1.3" TFT Display Gehäuse/Displayabdeckung

Dieses flache Gehäuse für ein 1,3" TFT Display Modul wurde speziell für eine kompakte und saubere Integration in Elektronik- und DIY-Projekte entwickelt. Das Display wird von unten in das Gehäuse eingeklipst – es sind keine zusätzlichen…

Downloads
13
Likes
1
Rating
0
P
PrintablesKen226

Voron 2.4 Touch Screen Housing for BTT Pi TFT50 V2.0

The screen is held into the housing using 4 m2.5x8mm socket head cap screws. The housing attaches to the Voron 2020 rail using the default m3x8mm socket head cap screws. This screens screw pattern is too wide to accommodate the default…

Downloads
1,965
Likes
326
Rating
4.91
P
PrintablesV1 Engineering

TFT35 E3 V3 Case

Requires two screws, 6-32 or M3.5 any length between 8mm and 30mm. Second version, 3 parts with 5mm in the title, Fits M5 screw 8mm+ in length. Uses the same clip. Removable stand, can be doubled up for a kickstand or used single for the…

Downloads
1,904
Likes
88
Rating
4.69
P
PrintablesKen226

BTT TFT35 SPI V2.1 Case CB1, Voron2.4

Edit 3/12/23 0800. I think I finally got to a version that prints without a bunch of weird settings and crazy supports. This is a screen case for the BTT TFT35 SPI V2.1 that BigtreeTech introduced for their CB1, Raspberry Pi alternative.…

Downloads
1,624
Likes
191
Rating
5
P
PrintablesMatt Wilde

Case for Sunton ESP32-2432S028 2.8" TFT-Touch Board

This is a small protective case for the following Sunton board: ESP32-2432S028 Note: You'll need 2x M3*4 bolts to attach the PCB to the casing. If you are looking for additional electronics projects, checkout the following page:…

Downloads
1,571
Likes
96
Rating
5
P
PrintablesKen226

BTT Pi TFT43 V2.0 Voron 2.4 touch screen case

Model Update: 3/18/23@2030 hrs Pacific. After printing one of these, i realized that I made the counterbores for the screw holes too small in diameter. The counterbores are now 5mm diameter and should clear all M2.5 socket head and button…

Downloads
1,418
Likes
200
Rating
4.82
P
Printablesboothyboothy

BTT TFT35-SPI V2.1 Pivoting Display Mount

This is a Pivoting Display Mount for the BTT TFT35-SPI V2.1 The pivot assembly is spring tensioned to apply friction to the mechanism. I have repurposed an old bed levelling spring for this. A reasonably sturdy spring with a minimum ID of…

Downloads
1,315
Likes
194
Rating
5
P
PrintablesMogu1lito

BTT Pi TFT50 v2.1 Screen Mount for Voron Skirts_remix

Just slightly remixed model (https://www.printables.com/cs/model/518519-btt-pi-tft50-v21-screen-mount-for-voron-skirts) cutout for reset button frame is around whole display with cutout for buttons (just remove supports) I used this…

Downloads
1,152
Likes
104
Rating
5
P
PrintablesTom's Basement

The CheaPad (BTT Pi + TFT35 SPI) : The Cheapest Klipper Pad !

The CheaPad : the most affordable DIY Klipper Pad ! Let me introduce The CheaPad, an incredibly cost-efficient alternative to all the Klipper pads out there! 🚀 I'm excited to share this minimalist yet highly functional solution for 3D…

Downloads
1,102
Likes
186
Rating
5
P
PrintablesDorffMeister

Case for 2.8" ILI9341 TFT LCD and microcontroller

Video demonstrating the touch controls / adjusting brightness https://www.youtube.com/watch?v=x7zqOPEqBCw This project is for the 2.8" ili9341 TFT LCD and Touchscreen . The ESPHome code for this project, which is a clock showing inside…

Downloads
1,049
Likes
43
Rating
0
P
PrintablesKnoddel

TFT 5" holder for Voron 2.4 - BTT PITFT50 V2.1

Update der Display Aufnahme für Bigtreetech btt pi tft50 v.2.1 Das Original Display Halterung ist unter https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/alanho/BTT_PITFT50_v2_Mount zu finden. Der Original Halter für den…

Downloads
952
Likes
67
Rating
5
P
PrintablesAlego

TFT 5" holder for Voron 2.4 - BTT 2.0 PITFT50

TFT 5" holder for Voron BTT 2.0 TFT50 this is a remix of ryanwilson's TFT holder. I raised the edge a bit to close the gap in the frame. After printing just break away the bridging bar. For printing please use the original instructions.…

Downloads
911
Likes
113
Rating
4.6
P
PrintablesKen226

BTT TFT35 SPI V2.1 Touch Screen housing Voron 0.2 Version 2.0

User Smuk3d asked me if i could create a version of the TFT35 Voron 0.2 housing that moved the viewable area of the screen to center, and allowed for a more symmetrical bezel. It was alot of work and required a 90ish percent redesign of…

Downloads
887
Likes
136
Rating
5

LowRider 3 CNC - control box case for BTT SKR Pro 1.2 board and a BTT TFT35 E3 touchscreen (v1.2)

Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…

Downloads
732
Likes
57
Rating
5
P
PrintablesBanditoz

Screen case for the bigtreetech tft35 SPI v2.1

I recently put klipper on my ender 5 pro and wanted the same user experience on my ender 3 pro. Ordered the bigtreetech manta E3EZ board with cb1 and a TFT35 SPI V2.1 screen. There was no housing for the screen available at the moment so…

Downloads
723
Likes
76
Rating
4.83
P
PrintablesKen226

Voron Switchwire BTT TFT35 SPI V2.1 Housing

This is a screen case for the BTT TFT35 SPI V2.1 that BigtreeTech introduced for their CB1, Raspberry Pi alternative. The CB1 has the drivers for this display built-in. The Screen sits a couple millimeters below the level of the housing…

Downloads
723
Likes
103
Rating
5
P
PrintablesStonecold

BTT TFT35 V3.0 LCD cover for MK3/S Bear

This LCD cover is to fit the Big Tree Tech TFT35 V3.0 on a MK3/S Bear frame. In this design the supports are held in by 4) 3mm x 8 screws, which also hold the board in the cover. Trying to think of a better way because there isn't much…

Downloads
698
Likes
30
Rating
4.75
P
Printables3DPrintBeginner

Ender 5 Plus / CR-10S PRO TFT35 V3 Case support

This mount allows you to install the awesome case made by JimbalNy. ( https://www.thingiverse.com/thing:4153427 ) I installed it on my Ender 5 Plus, but it should work on the CR 10S PRO V1 or V2. It uses the same bolts mentioned. If you…

Downloads
695
Likes
35
Rating
5
P
PrintablesKen226

Voron 0.2 TFT35 SPI V2.1 touch screen housing

Disclaimer: I used BTT's CAD model and the Voron 0.2 CAD models for dimensions. I don't own a Voron 0.2 or a TFT35, but Printables member Eric Ebert, who assisted with many of the features of this design Printed and test fitted a couple…

Downloads
676
Likes
133
Rating
5
P
PrintablesRaspberry Pi

Case for Raspberry Pi RP2040 1.28-inch TFT display watch board

This a two piece 3D printable case for the Raspberry Pi RP2040 based 1.28-inch watch available for $35.50 from Tindie here and also available from AliExpress here . For best results print using a SLA (Stereolithography) resin based…

Downloads
658
Likes
173
Rating
0
P
Printablesno one

2,8 TFT SPI 240x320 V1.2 (3d Modell)

2,8 TFT SPI 240x320 V1.2

Downloads
617
Likes
10
Rating
0
P
PrintablesAdafruit

OctoPrint Raspberry Pi Rig 3.5" PiTFT Touch Display

UPDATE Added a slot in the top half for Raspberry Pi Camera module https://youtu.be/lVM0vg\_LYkY Learning Guide: https://learn.adafruit.com/3-dot-5-pitft-octoprint-rig/overview OctoPrint & Raspberry Pi This project adds a touch screen…

Downloads
614
Likes
156
Rating
5
P
Printablesfoorschtbar

Case for TTGO T-Beam V1.1 (RDZsonde) with 2.0 TFT Display

This is a upgraded Case for the TTGO T-Team RDZSone tracker board with a 2.0 TFT Display. Print instructions Parts 1x LILYGO® TTGO T-Beam V1.1 ESP32 433 Mhz WiFi Bluetooth GPS 1x 2.0" ILI9225 SPI TFT/LCD 4x M2.5x10mm Flat Head Hex Screws…

Downloads
595
Likes
23
Rating
5
P
Printablesmarigu

1.8 inch TFT LCD case

Small TFT LCD case for testing purpose (with breadboard etc.). It should fit some chinese 1.8 inch TFT LCDs. There is hole for SD card as well. Fusion 360 file included if you want to modify it. Easy print, no supports needed. Prusa i3…

Downloads
579
Likes
22
Rating
0

1.28 in TFT display cover

It is a simple cover for the 1.28" TFT display (ICGC9A01) Chinese version. It has the front cover with a protection rim and the back cover with indents for the circuits in the back of the screen. You can get information on the original…

Downloads
543
Likes
27
Rating
5
P
Printablesalgenist

Raspberry Pi 3A with 3.5 inch TFT Display Case

There is not much option for model A if you want to use it with a touch screen. So, I modified @Sneaks ' great design for my needs.

Downloads
521
Likes
46
Rating
4.5
P
Printables3DPrintDemon

BTT TFT50 Pi V2.1 DSI Touchscreen Klipper Octoprint Sovol Mount SV06, SV06 Plus & SV01 PRO

…Please be sure to hit like & post a make, I'd love to see your prints! UPDATE: Model for BTT TFT50 PI SCREEN V2.1 ADDED!! LATEST VERSION!! IMPORTANT NOTE!!! The newer V2.1 screens have 3 buttons instead of a switch & brightness wheel.…

Downloads
510
Likes
134
Rating
4.75
P
PrintablesVTom

yoRadio case for IPS 4.0 Inch, ILI9488, TFT LCD 480*320

yoRadio box. More information https://github.com/VaraiTamas/yoRadio.git

Downloads
509
Likes
36
Rating
5
P
PrintablesShinobu Tezuka

Raspberry Pi Model 4 with BTT TFT50 (2.0 , 2.1) Screen Enclosure

UPDATE: Added the 2.1 version (untested) Designed with air flow in mind this light weight case. M2.5mm stands that came with the Big Tree Tech TFT50 is used in this. If it is missing they are 17mm long. There are 2 M3 size on each side of…

Downloads
508
Likes
68
Rating
5
P
PrintablesEmbrace Making

CR10 Smart X - SKR Mini E3 V3 Mounts and BTT TFT35 V3 Case (Easy Swap)

WATCH THE VIDEO BELOW TO UNDERSTAND HOW TO USE THESE PARTS THIS PAGE IS FOR THE PARTS COMPATIBLE WITH THE CR-10 SMART. YOU CAN FIND MY “EASY SWAP” PCB KIT HERE:…

Downloads
503
Likes
35
Rating
5
P
PrintablesTom Mullebrouck

Raspberry Pi 4 + Adafruit 3.5 tft case with fan

This is a case for the raspberry pi 4 with an adafruit 3.5 tft screen. In the bottom of the case, you can use a noctuna fan NF-A4x10 5V. I used a 5V fan, so I can use the voltage of the USB port. The bottom and top is clicking, no screws…

Downloads
495
Likes
55
Rating
5
P
PrintablesStvnLntz

BTT TFT50 v2.0 Case/Housing + Mount (Revision 2)

Housing for BigTreeTech TFT50v2.0 (Revision 2) Pi mounting holes on the back can be used for the mount. (Mount is designed by Simon Vez) Opening for Pi Cam cable. Opening for the brightness wheel. Can also be used without the Back Cover.…

Downloads
492
Likes
50
Rating
5
P
Printablesloserish

BTT PITFT50 V2 Pi4B Enclosure

This is a simple enclosure for the BigTreeTech PiTFT50 V2.0 screen assembly with a Raspberry Pi 4B mounted inside. The BTT mounts into the case with holes for the screw bosses and is secured from the back side with small metric screws…

Downloads
491
Likes
62
Rating
4.75
P
Printablesbadabby

Adafruit ESP32-S2 Reverse TFT Feather Case

A case for the Adafruit ESP32-S2 Reverse TFT Feather. Uses four to six m2x10 screws. https://www.adafruit.com/product/5345 Also included a battery case. https://www.adafruit.com/product/3898 I've updated both back plates to have better…

Downloads
481
Likes
42
Rating
5
P
PrintablesJerlo

Jerlo Bear LCD Cover BIGTREETECH TFT35

Here is a superb TFT35 Bigtreetech LCD design for the Prusa Bear SKR project The rear arms are fixed to the bear frame with 4 M3x10 screws Important : Layers = 0.2 Perimeters = 0.2

Downloads
470
Likes
21
Rating
5
P
Printablesacorderob

MK3 RPi + piTFT cover

This is an LCD cover for the Prusa MK3 with support for a Raspberry Pi 3b+ with an Adafruit piTFT Plus 3.5" touchscreen (both under the cover). It includes an additional cable protector to hide the power and camera cables and two screen…

Downloads
468
Likes
73
Rating
5
P
PrintablesLoboThirteen

Display Mount for BTT PI TFT70

You Need: 2x Cap Head Screw M6x12 2x 3030 Drop-in T-Nut M6 8x Cap Head Screw M2.5x10 1x Cap Head Screw M5x40 1x M5 Nut

Downloads
458
Likes
67
Rating
4
P
PrintablesPamilias

BTT TFT35 SPI V2.1 Touch Screen Case for Voron2.4 (Centered)

I haven't got to print this model yet as my printer is still a WIP, but it should be printable without support as the original design. Case can be printed using Voron PIF standard, but I recommend printing the bezel and accent with finer…

Downloads
445
Likes
51
Rating
0
P
PrintablesFizzy

FT BTT Pi TFT50 screen mount (Voron Switchwire/2.4)

** Made some edits to the design so you can now use the original M2 screws that come with the screen. I also adjusted the gap between the 2 mounting holes as they did not align 100%. This is a screen mount for the BigTreeTech Pi TFT50…

Downloads
436
Likes
95
Rating
5
P
PrintablesAero

BigTreeTech PITFT50 HDMI 45-degree Mount (for Voron v2.4)

Remix of PITFT50 Mount for the BTT PITFT50 HDMI by CannedBass https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/CannedBass/PITFT50_45_degree_mount BOM: 4x M3 Brass Inserts 4x M3x8 FHCS 2x M3 Hammer(T)-Nuts 2x M3x8 SHCS

Downloads
420
Likes
44
Rating
5
P
PrintablesFizzy

Voron Switchwire/2.4 BTT Pi TFT43 screen mount

This is a screen mount for the BigTreeTech Pi TFT43 touch screen to be mounted on the Voron Switchwire or the Ender 3 conversions. This screen is powered directly from the Raspberry Pi ribbon cable and best of all its plug and play - no…

Downloads
416
Likes
72
Rating
5
P
Printablesscross01

ST7789 TFT Display Screen Case

This is slim compact case for a ST7789 I2C 1.54" TFT Display Screen. The case was designed based on the measurements of this model I ordered from AliExpress. As with the other slim cases I've created the model's clearances are very tight…

Downloads
390
Likes
16
Rating
5
P
Printablesmlee12382

BTT Pi TFT50 v2.1 Screen Mount for Voron Skirts

This is a mount for the v2.1 version of the BTT Pi TFT50 screen for Voron skirts. It is designed copying the v2 mount from alanho in the VoronUsers github. The v2.1 went to 3 buttons instead of a rotary knob for brightness and a switch…

Downloads
379
Likes
40
Rating
0

Housing Display TFT ILI9341 320X240 (ESP32 /ESP8266)

Gehäuse für ein ILI9341 TFT 320X240 Display Das Gehäusedeckel wird nur aufgesteckt. Das Display wird unter der Kappe mit 4Stück M3 X max.10mm Schrauben festgehalten. Das Gehäuse bietet genügend Platz um darin einen ECP32 oder D1-Mini etc.…

Downloads
377
Likes
25
Rating
0
P
PrintablesViriathus

BTT TFT35 E-3 V3 Enclosure with WiFi extrusion (Ender 5 Edition)

I remixed the case by qwert29 due to a few issues with my board not fitting correctly as well as adjusting for minor cosmetic changes. Front: Add 1.5mm inside right so that it ensures that the displayed screen is perfectly aligned, no…

Downloads
363
Likes
33
Rating
5
P
PrintablesFizzy

FT BTT Pi TFT70 screen mount

INTRODUCTION With the popularity of BTT Pi screen, there has been a request to support the biggest model the Pi TFT70. THE DESIGN The screen mount was designed to be in line with other BTT Pi TFT mounts. For the Pi TFT70 screen, it…

Downloads
360
Likes
49
Rating
5

LowRider 3 CNC - control box case for BTT SKR 1.4 Turbo board, Raspberry Pi 4b, and BTT TFT35 E3 touchscreen (v1.3.5b)

This remix was requested by Stefan Raatz , who desired a case for holding an SKR 1.4 Turbo (instead of SKR 1.2 Pro), as well as a Raspberry Pi 4 model B. Quick heads up: These remix designs were somewhat “intended” for the case being…

Downloads
352
Likes
30
Rating
0
P
PrintablesRavenwreck

BigTreeTech TFT35 V3 Case

Couldn't find a nice basic case so I designed one from scratch. Holes for SD and USB. Not sure if there is clearance for ESP-module or other cables than the flat cables shown in pictures. Screwholes sized for 3 mm screws.

Downloads
349
Likes
33
Rating
5
P
PrintablesTonyP

Anycubic Koba 3 PTFT 9Tube X-axis Gimbal Mount

Any Cubic Kobra 3 X-Axis PTFE 9 Tube gimbal. This is an new design that was requested by a user for a gimbal mount that can handle 8 PTFE tube from 2 Ace Pro units. This gimbal mounts allows freedom of movement in all axis relieving the…

Downloads
342
Likes
32
Rating
5
P
Printablesboggis the cat

TFT35-E3 case for Ender 5 Plus

Enclosure for BigTreeTech TFT35-E3 dual-mode screen, for replacing the standard display on the Ender 5 Plus . Requires a total of nine M3 bolts, 8 mm minimum length M3 × 8 mm (or longer - up to 12 mm) ×7 – four for holding the TFT35-E3…

Downloads
342
Likes
23
Rating
0
P
PrintablesDragonRR

Bezel and template for 1.8" TFT ST7735

I made this to contain a 1.8"TFT screen ST7735 and attach it to a project box which contained an Arduino. The template allowed me to precisely cut out the holes for the cables and the screws to hold it in place and then seal the main box…

Downloads
339
Likes
6
Rating
0
P
PrintablesDarrion Johnson

2.8 Inch LCD TFT Module With Touch Case & 45 degree Stand | P1Touch

This 3D model intricately details a uniquely designed case for the 2.8-inch LCD TFT display module. The custom case not only ensures easy access to the screen but also boasts an integrated storage container, specifically tailored for the…

Downloads
334
Likes
9
Rating
4
P
Printablesrandomlamer

Voron 2.4 BTT PiTFT50 45-degree mount Clicky-Clack Door

45-degree mount for BTT PiTFT50 display to also work with the Clicky-Clack door modification intended for Voron 2.4. Display holder was found here: TFT 5" holder for Voron 2.4 - BTT PITFT50 by Alego | Download free STL model |…

Downloads
326
Likes
43
Rating
5
P
PrintablesDomLuck

BTT Pi 1.2 + 4020 fan + TFT35 SPI Case

It all snap fits into place but I strongly advise bolting it down if you're gonna move it around often or will put it somewhere it might fall. The top piece needs supports for the bottom of the screen hole The 4 holes on the side can be…

Downloads
322
Likes
52
Rating
5
P
PrintablesMichal Schwarz

Wall frame for 3.5" LCD TFT touch display "ESP32-3248S035"

Frame The frame is as small as possible while maintaining at least a partial symmetry and some space for the wall mount. It can be printed face down without any supports or a brim, but the wall mount will need to be printed diagonally…

Downloads
322
Likes
19
Rating
0
P
PrintablesJHenley01

Voron 2.4/Trident 45 Degree Mount for PI TFT43 4.3" Display

I couldn't find a mount that fit the PI TFT43 4.3" screen so I remixed the design linked below to fit and designed a bezel. Print with normal Voron part settings, no supports needed.…

Downloads
313
Likes
14
Rating
5
P
PrintablesDemon777

BIGTREETECH TFT35 E3 V3.0 mount (NO LOGO) .step

BIGTREETECH TFT35 E3 V3.0 without logo (4 holes drill yourself to your size )

Downloads
312
Likes
26
Rating
4.67

Bigtreetech TFT35 SPI for Voron V0

This is a display mount for a BTT TFT35 SPI to a V0. Two parts in total, around 1,5h print time. No supports, you still need to arange them yourself; Cover (stl name v02_spi_display_1 and blank) on its face and the mount itself standing…

Downloads
311
Likes
44
Rating
5

Raspberry Pi 3B+ with BTT TFT50 Screen Enclosure (Klipper screen, Home assistant)

This is my take on a case for an RPI 3B+ attached to a BTT TFT50 v2.1 screen with ventilation and access to the screen buttons. Useful for a remote klipper screen install, Homeassistant dashboards or anything a little touchscreen computer…

Downloads
311
Likes
57
Rating
5

LowRider 3 CNC - control box case for Raspberry Pi 4b, BTT SKR Pro 1.2 board, and BTT TFT35 E3 touchscreen (v1.3.3)

This remix was requested by Miguel Arellano , who desired a 75 mm extension of an existing control box's lid and base, in order to house a Raspberry Pi 4 model B, so he can run Octoprint. Quick heads up: These remix designs were somewhat…

Downloads
310
Likes
37
Rating
5
P
PrintablesFizzy

Ender 3 - BTT Pi TFT50 Screen Mount

This is a screen mount for the BigTreeTech Pi TFT50 touch screen. This mount is designed to be used with the Raspberry Pi directly mounted to the back minimising cable mess. This screen is superb as it powers from the Raspberry pi…

Downloads
299
Likes
53
Rating
4
P
PrintablesRomRider

Rat Rig V-Minion TFT35 V3 Arm and Case

This includes an arm and a case to hold a BTT TFT35 V3 LCD screen for your Rat Rig V-Minion The arm requires: 2x M6x12 2x M6 T-Nut 2x M3x8 or M3x10 to attach the case to it The box is a very snug fit, so make sure your printer is dialed…

Downloads
297
Likes
40
Rating
5
P
PrintablesEmbrace Making

CR-6 SE 'X' - SKR Mini E3 V3 Mounts and BTT TFT35 V3 Case (Easy Swap)

THIS PAGE IS FOR THE PARTS COMPATIBLE WITH THE CR-6 SE. YOU CAN FIND MY “EASY SWAP” PCB KIT HERE: https://embracemaking.com/products/cr10-smart-cr6-se-mainboard-easy-swap-pcb-kit The Creality CR10 Smart and CR-6 SE are platforms that have…

Downloads
294
Likes
23
Rating
5
P
Printablesshuncey

4" SPI TFT 480x320 V1.2 (ILI9486)

Feel free to use, or modify this model :) It should be accurate enough to make a case/enclosure for this display.

Downloads
284
Likes
10
Rating
0

LowRider 3 CNC - control box case for BTT SKR Pro 1.2 board and a BTT TFT35 E3 touchscreen (v1.1)

Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…

Downloads
279
Likes
23
Rating
0
P
Printablesjzmuda

TFT LCD Display Housing TZT 240x320 2.8" SP

The housing was designed for a 2.8" LCD display. In the device under construction, simply cut a 52 × 90 mm opening and attach the housing using double-sided tape or plastic adhesive. The inserts used are M2.5 × 4 × 3.5. I printed the…

Downloads
278
Likes
17
Rating
5
P
Printablesdanielvolz

Bigtreetech piTFT50 Holder for Ender 3 S1

After changing my Ender 3 S1 using Klipper, I also had to change the Stock-Display, because it became unusable. For the BTT PITFT50 Screen Mount , found at: https://www.thingiverse.com/thing:4800945 , I created a holder to change the…

Downloads
277
Likes
63
Rating
5
P
Printableslowboydrvr

Ender 3 Pro LCD/Pi 4/TFT 3.5 E3 Case

UPDATE: I had a request for the same cover except for the Raspberry Pi 3, so I have added it. I found a model of the Pi 3 to use for a template, so if the model was accurate, it should work. I liked the idea of having the LCD and…

Downloads
276
Likes
38
Rating
4.33
P
Printablestony

case for 3.5 inch TFT screen

I designed this case so I could have the TFT35 screen from a Raspberry Pi on the front of my Ratrig V-Core 3. It will probably fit other extrusions but it was designed to sit nicely on 3030 extrusion that the Ratrig has. Print Settings…

Downloads
270
Likes
16
Rating
0
P
Printablesrualab

Ender 3 S1 Pro pi4 + piTFT50

Simple ventilated case. I use without radiators, with a fan for blowing inside, connected to 3.3v (not to 5 volts) - this is enough to cool and it is very quiet. In a room of 26 degrees C, the pi sensor shows 38-40 degrees C. Required:…

Downloads
270
Likes
63
Rating
5
P
PrintablesKuro Nakajima

MKS Pi-TS35 TFT Screen Mount for Voron 2.4R2

This is the case and the mount for MKS Pi-TS35 TFT Screen on Voron 2.4R2

Downloads
264
Likes
17
Rating
3
P
Printablesluma

BigTreeTech SKR-PRO v1.2 and TFT35 v3.0 Enclosure

3D printable enclosure for the BigTreeTech SKR-Pro v1.2 controller and TFT35 v3.0 touchscreen LCD Project Repository Link Head to the project repository for the latest revision of this model along with full assembly instructions and CAD…

Downloads
263
Likes
29
Rating
4
P
PrintablesEclsnowman

BTT PITFT50 ENCLOSURE

This is an enclosure/mount I designed for the BTT PITFT50 for my HercuLien V2 printer. I use to house the screen and rasberry pi which runs Klipper and Klippersreen on my large format printer. Most of the time I just use the web interface…

Downloads
256
Likes
28
Rating
4.5
P
PrintablesMess

PITFT50 V2 vertical display mount Ender 3 S1 (Pro)

I couldn't find exactly what I wanted so I designed it myself. And I must tell you that it is very beautiful! I made a thin, sleek, minimal and sturdy vertical PITFT50 V2 display mount for the Ender 3 S1 and S1 Pro without the Raspberry…

Downloads
255
Likes
59
Rating
5
P
Printablesmadeby_aaron

Adafruit 3.5 PiTft with Pi 3B Enclosure

I can't find any decent enclosure for Adafruit 3.5 PiTft with Pi 3B. So, I decided to make one. To display MagicMirror stuff like weather, news feed, upcoming calendar events.. etc on my desk. You can find more information about…

Downloads
253
Likes
34
Rating
4.8
P
PrintablesNathan

Voron Trident BTT Pi TFT 70 Mount

To mount the screen add the screen surround to the screen, then use 4 x M2.5x6 SHCS machine screws to mount the screen. Then use 2 x M3 T-Nut and 2 x M3x8 SHCS and mount to the frame. Image may need to be flipped. The brightness knob is…

Downloads
253
Likes
46
Rating
0
P
PrintablesJoe

2.8" TFT LCD Cover

A simple cover for an 2.8" TFT LCD display from Adafruit. https://www.adafruit.com/product/1770

Downloads
251
Likes
7
Rating
5
P
PrintablesDylan Truong

Voron 0.2 TFT35 SPI V2.1 Touch Screen Housing by Ken226 STEP and F3D Files

This model by Ken226 has been recreated to provide STEP and F3D files, as these were not provided with the original post. All renders and the STL files were created exclusively by Ken226; I take no credit for the original design. Ken's…

Downloads
251
Likes
46
Rating
0
P
PrintablesJohnJ

BTT TFT35 Prusa LCD Cover

This is a quick remix of the Original Prusa LCD cover for the BTT TFT35. This is a quick, need it in a hurry remix, so not perfect, but looks and functions well. I did not find any other option out there and this cover also clears the…

Downloads
246
Likes
14
Rating
5
P
PrintablesFrancq

BTT TFT35-SPI V2.1 SUPPORT 4040

Support pour BTT TFT35-SPI V2.1 pour profil 4040 comme la ENDER 3 Version 2.0 support plus épais.

Downloads
246
Likes
46
Rating
4.5
P
PrintablesNoze

Mount for BTT PI TFT50 v2 - Voron Switchwire

A Mount for the BTT TFT50 V2 screen (KlipperScreen) for the Voron Switchwire It's designed to use the frame created by ryanwilson ( VoronUsers/printer_mods/alanho/BTT_PITFT50_v2_Mount at master · VoronDesign/VoronUsers · GitHub )

Downloads
243
Likes
50
Rating
0
P
PrintablesMarcus24

3.2 TFT Screen Case (Weather Station)

SD card holder and all PCB connectors pins have to be desoldered from screen. Also I'm using USB type C instead of micro USB connector which is on Wemos board. You can print Stand.stl if you want to have it on the desk. Or you can print…

Downloads
238
Likes
36
Rating
5

LowRider 3 CNC - control box case for BTT SKR Pro 1.2 board and a BTT TFT35-v3x, NON-E3 (such as v3.0.1 etc) touchscreen (remix v1.3.1)

Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…

Downloads
236
Likes
31
Rating
5
P
PrintablesKen226

BTT Pi TFT43 V2.0 Touch Screen Mount for Voron Switchwire

I designed this to so that the BTT TFT43 V2.0 could be mounted to a Switchwire. This drops about 15mm lower than the bottom of the skirts, so you will need some clearance. The housing mounts to the skirts, in the same manner as the…

Downloads
236
Likes
41
Rating
5
P
PrintablesAaron Roach

Neptune 3 Pro/Plus/Max BTT TFT50 and Raspberry Pi 4 Mount

This is a display mount for the BigTreeTech TFT50 touch display for Elegoo Neptune 3 Pro/Plus/Max series printers. This mount replaces the included display and mount, and re-uses the screws from the original display mount. There is room…

Downloads
236
Likes
65
Rating
5
P
PrintablesIRIX

BTT Pi TFT 70 Zero-G Mercury One Case v1.0

This is a case for the BTT pi TFT 70 (not the TFT70 that works with marlin btw) I recomend ABS since parts get hot under operation and pla WILL WARP. Print settings: 0.2 layer height 0.24 first layer 4 walls 40% infill And for the bezel I…

Downloads
234
Likes
31
Rating
5
P
Printablesjglerner

BigTreeTech Stand for TFT70 and Pi 3/4

I made this remix for use with the bigger BTT TFT70 for KlipperScreen or OctoDash Infil around 25% Uses PLA+ from eSun and it keeps in good shape. No supports are needed, nor rafts and/or brims.

Downloads
233
Likes
17
Rating
4.5
P
Printablesjzmuda

TFT LCD Display Front Panel 240x320 2.8" for 80*170*130 DIY Case (YoRadio)

The panel is designed to be mounted in a DIY metal housing with dimensions of 80 × 170 × 130 mm. It is intended for use with a TFT LCD display TZT 240×320 2.8" SP and an encoder or potentiometer. I created the panel with the YoRadio…

Downloads
222
Likes
16
Rating
0
P
PrintablesF14V

Case for BigTreeTech PITFT50 V1.0 and Raspberry Pi 4 Model B [source available]

What was originally supposed to be a quick modification of an existing case turned into a few hours long new design from scratch with improvements! The case was designed with the following goals: printable with minimal supports only use…

Downloads
222
Likes
34
Rating
5
P
PrintablesCredomane

BigTreeTech TFT70 V3.0 Case

After printing the original model by phesketh01 (thingiverse) I believe it to be for an ever so slightly different variation/version of the BTT TFT70. Creating a number of small defects that prevented my BTT TFT7 V3.0 from fitting into…

Downloads
221
Likes
20
Rating
5
P
PrintablesMartinisoft

BTT Pi and TFT35 spi extension for Ender 3

I designed A Case to house your BigTreeTech Pi while being connected to an 2.5 inch SSD drive. It also features a Bezel that houses the BTT TFT35 spi for Klipperscreen which you can connect directly to the BTT Pi. The model is designed in…

Downloads
220
Likes
45
Rating
5