4,415 models
Sized inspired from commercial elastics threader. Easy and quick to print, a must to have in your sewing toolbox. I have added a version with holde to allow cords or round elastics insertion. Can be print in PLA or PETG
Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads Looking for BSPP thread testers? You can find them HERE! November 10, 2024 Update: Added tester variants with a tab for easy organization on a ring, cord, or zip…
Customizable car / bike tire valve (Schrader) cap with thread. The thread starts from the middle so you don't need to make so many turns and it's easier to put on. There's an extra space for a tip. Print instructions Any filament works…
Update 04.01.2022 This design was highly popular ever since I made it on a long winter night. Despite the fact that it required manual thread cutting to get it's M4 inner thread, users of the Prusa Mini liked it a lot. That was reason…
Thread Gauge Tester: A Handy Tool for Measuring Hydraulic Pipe Threads Looking for NPT thread testers? You can find them HERE! ***Smaller Size UPDATE*** (July 18, 2024) Added the following measurements: 1/4 inch, 1/8 inch Product…
This is a remix of the fivesixzero's Case for Flipper Zero Wi-Fi Module to use it with Ruthex M2 threaded inserts and M2 screws instead of M3 screw + nut. The screws needed are M2x7mm. I also made a version with the Marauder Skull logo on…
Thanks a lot to @Noname_Engineer for that great GoPro tripod model. I was too lazy to go out to a hardware store and buy thread parts. And I also needed a trippod mount very quickly (stores were closed). Because of that I just added the…
Can be scaled I printed in two sizes 50mm and 30mm.
Simple interface to add the italian broom thread to wooden handle ø 22-23mm Semplice interfaccia per aggiungere la filettatura italiana per la scopa ad un manico da ø 22/23mm. Utile nel caso la filettatura del manico sia rovinata.…
A simple holder for the Ikea Skadis system to organise thread reels
A little bigger than the original to accommodate a (1.1Kg) 22cm roll and Threaded Inserts. I made the design from scratch. I also changed the inserts from hexagonal to cylindrical with threads. This way rolling the paper should be…
Next time the drawstring comes out of your garment, instead of struggling to get it back in, print this model and easily fead it back through (almost like a giant needle!). This is very fast to print and uses very little filament. This…
Updated to v.1.5 . Reinforced locking cone. This side is completely flush. On the opposite side, the tube is extended by 0,5mm. Spare sewing machine thread spool to rewind thread from big one (for overlock machine) to home sewing machine.…
Deutsch (English below) Wassernapf mit PET-Gewinde für PET-Flaschen. Dient dazu, einen größeren Wasservorrat zu haben. Viel Spaß beim Drucken und bewertet gerne… Drucker: Original MK3S+ Filament: NOYES PLA+ Grau…
This is a simple tri-glide webbing slide for 1" webbing. There is a threaded and no-thread version. Update: versions are also available for 30mm, 1.5", 50mm. Design parameters: The webbing slots are sized for 1" webbing (actual width is…
The models can be printed in any material you wish! I printed them in 60% scale as i didnt need them to be that big, but feel free to print any size you wish! The premade G-Code is at 60% scale. The model is a tool to learn the difference…
This threaded adapter converts from 3/4" garden hose female to 15/16" faucet male. Make sure to use a washer on the garden hose side. There are two version of the .stl file, one with a built-in supporting ring (break it off after…
Updated to ver. 1.3: Each pin base is more reinforced, according to suggestion in the comment. I need a box for all of my sewing thread spools organized. As my spools are of 500 m sizes, bought at Lidl, no one of the Aliexpress organizers…
Organize your thread collection! Space for 110+ bobbins DMC needle packs, Fiskars scissors, and a small bottle for beads. Takes up the entirety of the MK3S build plate, with a 0.6mm nozzle will print in 6.7 hours. Reupload of my original…
I needed to make something to attach to a PET bottle and couldn't find a model file to import into FreeCAD. So here's one. The model is not really useful for anything (unless you desperately wish to have a ring screwed on top of your PET…
Was pretty unhappy with my current storage solution for all of my thread and decided to do something about it. I designed these spool holders to be just small enough to hold standard Gutermann spools but found it could hold large…
This design is a POC on how to create a template for round, threaded boxes with any custom user parameters. The Fusion360 file contains a bunch of parameters to create your own sizes. You might have to consider and tweak the cap- and…
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
The thread is loosened by 0.2mm, to allow for printer tolerances. Nut fits well on machined counterpart. Printing directions: 0.1mm layer height () 15mm diameters Increase vertical walls to 5 so no infill is left larger diameter 1…
Introducing the Telescopic Table with Threaded Security: a compact and portable stand designed for maximum stability and convenience. This innovative table features telescopic legs that can be adjusted to three heights: 180mm, 315mm, and…
Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…
A small box to store your ruthex tips for threaded inserts. Use two pieces of 1,75mm filament as bolts for the hinges. It might be necessary to drill up the holes with a small drill bit after printing.
Planned for low pressure. Printed using ePLA. Use support as already included in the attached bgcode file or use your own.
You've already invested in a Gridfinity organization system and need to store thread or bobbins. This is the solution for you! I have included models for staking 1 - 3 spools on top of each other as well as a model that will fit 4 smaller…
You need to turn it in first time. The screw holes will become smooth.
Mount select TP-Link camera models on a standard quarter-inch thread using the existing twist-lock base. This is a copy of the existing twist-lock mount, but with threads for mounting on a tripod or similar, if you don't want to drill…
Updated to ver. 2.0: The spool pin, added hollow hole to reinforce rigidity of it. The washer inner dia increased to 9 mm. On one of my Singer 431G sewing machines, spool pins are cut and glued by help of glue gun. The already original…
Added a thread on the end to screw onto a 27.4mm thread, like the one on the diy vacuum bag here: https://www.thingiverse.com/thing:6107866. (it is a really good diy vacuum bag by Johnnywatchbox on Thingiverse). If your vacuum starts…
This generator will make all common size elastic threaders (also known as tape threaders and bodkins). It will also make a drawstring threader for round cord. How to use the Generator You may customize just about every dimension to create…
I had some Mop heads with a conical screw and added that to the Vileda Adapter from Alfredo on thingiverse
Single-piece sheath for for 4.5" Gingher Knife Edge Thread Nippers. When these scissors are left loose in a bag they remain open and can get snagged on craft materials, or worse, your hand! After a few tragic mishaps (one of which…
The adapter has an inner diameter of 16 mm and is compatible with my cheap chinese JCB soldering iron. It also fits the Proxxon drilling and milling bench BFB 2000 with its outer diameter of 43mm. This means it can fit any drill stand…
If these parts are missing or are damaged, I tried to design my own and 3D print them. Singer spare part no. #44879-482 Tension Spring Cup is composed of two parts: 0-9 dial file, where corresponding number label 0123456789.lbx need to be…
This is an adapter, to use a pole with cone threaded connector (as e.g. the Vileda ones) with the M24 connection mops, commonly used in Greece. It is a combination of the “ Vileda Mop rod, Coned Thread Connector” designed by Skaran (…
A simple adapter from 3/8ths inch Microphone stand thread to the three-prong mount system used on GoPro and similar Action camera accessories. Printed in Prusament PETG black.
Aufbewahrungsbox für Ruthex Aufsätze zum Gewindeeinschmelzen M2-M8. Verschluß mit 4 Magnete Durchmesser 5mm x 1.7mm. Storage box for Ruthex attachments for thread melting M2-M8. Closure with 4 magnets diameter 5mm x 1.7mm.
Update: Hexagonal Prism is now updated to two new different models. There are different brands of sewing machines with different diameters of vertical sewing thread pins. For example some of my sewing machines have following diameter of…
credit: https://www.thingiverse.com/thing:1872229/files
18 1/4in posts hold standard thread spools. The 17 holes in the base fit standard narrow spools for a few more organization options. The SLDPRT model is fairly intuitive if you want to shrink or expand the organizer to suit your needs.
Printed using ePLA. use support as in the attached bgcode or use your own.
My compressor broke its oil-cap. The cap was just a threaded piece, with a hollow cylinder above, and a small hole all the way through the top to allow pass of air, as replicated here. I'd recommend printing standing upright, with threads…
Printed using ePLA. Support is required as already planned under the attached bgcode file, or use your own. Threads are NPT type.
a Debowler Lid with GL45 thread for Arizer Stems for your avp You need additionally one flask with GL45 thread, just search for “GL45” in the www choose your debowler spatula, wether you have the round sieves or the flat ones use the .3mf…
This is one of many requests for a 3D printed part for the household. This fixture will allow your Husqvarna Sapphire to draw thread from a cone placed on the table. I've printed several of these for my wife's sewing group, they seem to…
General info Was asked to help with making a thread spool rack and chose to make a configurable OpenSCAD model - you'll need to download the program to regenerate the model if you need a different layout or you can ask nicely and I'll…
Hammerkopfmutter T-Nut Mutter mit M4 Gewinde für 30x30 Aluminumprofile Nut / Slot / Series / U 6
For non-Spanish speakers: uncuarto.3mf = ¼" Female. uncuartoM.3mf = ¼" Male. tresoctavos.3mf = 3/8" F. tresoctavosM.3mf = 3/8" M. media.3mf = ½" F. mediaM.3mf =½" M. trescuartos.3mf =¾" F. trescuartosM.3mf = ¾" M. unapulgada.3mf = 1" F.…
remixed the great design by CrazyTim so that you can use a threaded insert and a screw for assembly
I would suggest giving the inside a good sanding before gluing.
EN: The funnel is designed for original 800-gram “Traiva” silicagel container. No supports needed. CZ: Trychtýř je navržen pro originální 800-gramový silikagelový obal značky “Traiva”. Tisknout lze bez použití podpěr.
A helper jig that holds the INBXX printed profiles level for you to more easily use a press to put in all of the threaded inserts in the printed profiles. Designed to be a quick print, print at least two. There's a hole to optionally…
I created this Adapter because my Version of the El Grande Selfie Stick doesn't have the ¼" thread on the bottom to easily attach it to a tripod. In order to use this adapter you need the following materials: 1x ¼" Threaded Heatinsert (…
Remix of " Jigsaw nozzle storage blocks for M6-size 3D print nozzles ", I made a slight modification in the thread, so its a semi-threaded entry, that way you can press the nozzle until a point where a manual or slight threading can keep…
I printed the holder using PLA, and it is incredibly sturdy; using PETG would almost be overkill. It is mounted using size 5 or 6 countersunk wood screws, though countersunk metal screws on a metal plate would work just as well. I used…
Adapt .25 OD plastic pneumatic/icemaker tubing to PC4-01 BSPT Thread. Works with Sunlu FilaDryer Filament Dryer S2 PTFE Adapter by MichaelQ Update: Works best using PTFE bowden tube as a liner inside the length of your nylon tube.
A friend who I sail with has a lot of whipping twine, and the spools take up a lot of space in his rigging bag. He showed me a fancy rigging kit that included some compact spools, and I thought that I could do better. This spool is…
I needed a better way to store my bobbin with the matching thread so I designed this part to slip over the thread post so I can store my bobbin along with the thread. This is the first model I have made! Both the top and bottom post are…
dapter for the dual-spoke steering wheel from the Škoda Felicia , converting the original spline hub into a mount for an M10 threaded rod . Fits into the original ~25 mm spline hub of the wheel and creates a through-hole for an M10…
This is a large threaded egg. It was designed to be large enough to hold one of McGybeer's articulated dragons (printed at the default size). Looks particularly good in multicolor coextruded filaments. It will print OK without supports,…
Generate your own nuts, bolts, washers and threaded rod by simply typing the required parameters into OpenSCAD. Great for replacing metal equivalents in many applications. Includes options to generate nuts, bolts, washers and WingNuts for…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . After much trial and error, I…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Filament Guide Sled and Filament Guide” for an amazing project " Filament Spool Switcher & Winder "…
Made for Schrader type valve. (the most common type) Fits mountain bikes, road bikes, cars and motorcycles. 0.15mm tolerance on the default model and 0.05mm on the tight version Optimized for 0.12mm layer height. Please, share your…
Thread Design This standardised thread is called PCO28 and is produced in two versions. PCO28 1810 - the original standard (point of this article) PCO28 1881 - the newer material-saving version with a shorter thread. My problem was that…
If you've ever needed to re-thread a drawstring for a hoodie, you know it can be tricky. After struggling with this once I designed these drawstring threader needles to make the process much easier. Simply pass the end of the string…
Use the Skadis T-nut to mount different accessories to the IKEA Skådis board. The accessory will be firmly attached to the board and will not come loose when used, as can happen with conventional hooks. Is the threaded T-nut strong…
Discover the Parametric Minimalist Jar with Thread —the ultimate blend of style and functionality for your 3D printing needs! This sleek storage container not only looks fantastic but also serves a practical purpose in keeping your space…
3D Printable Screw Generator for Fusion 360 This is a fully editable Fusion 360 file designed to generate screws specifically optimized for 3D printing. Most standard metric threads are designed for metal manufacturing, not for FDM…
This model was missing from Printable so I upload with credit to the original creator under Creative Commons.
A thread test block for normal Metric threads. You can see if your printer is capable of printing threads. If the threads are good, you can use it later as bolt measuring tool too. The v2 version uses a thicker marking to be more printable.
I found a high number of measuring tools for metric screws. But what about a measuring tool for inch screws, nuts and wrenches? I couldn't find any, so I created one, or better two :-) The tool is created for UNC and UNF threads and…
Knurled Modular Threaded Stackable Container. 100mm outside diameter. 20mm, 40mm, & 60mm side wall height containers (with bottom) and expanders (without bottom). Top and bottom can be used to make a 40mm tall container. 3mm walls. Print…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . I needed a hollow, two-part,…
Each holder holds five spools of thread with a diameter of up to 35 mm. Slightly larger diameters are fine if mixed with other spools of a smaller diameter. Edit August 2026: I added a longer version that also has room for a bobbin. If…
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (M900 Style)! UPDATE: All NEW cases available here: https://www.printables.com/@CNCKitchen/collections/2867288 Update 2023-08-13 Added case for V2 tip with easy-grip…
This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…
🎯 Recommended Print Settings For Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8-15% infill, which gives plenty of…
Dual Direction Thread Screw Set (Left-Hand, Right-Hand & Double-Thread) This model set contains several types of screws and matching nuts designed for testing, mechanical demonstrations, or educational purposes. Included Parts Right-hand…
Get the CAD and STL models of our inserts, to use them in your designs! Purchase original CNC Kitchen Inserts in our store CNCKitchen.STORE , at Prusa, or at a ton of resellers ! Get suitable soldering iron tips at CNCKitchen.STORE , at…
These screws are inspired by ISO 8765 metric screws but they have standard pitch threads . They come with hexagonal heads, that are slightly bevelled on one side and contain a washer-like elevation on the other side. The longer screws…
This spool adapter downsizes a 72mm filament spool bore diameter - Sunlu, Anycubic, Crealty, Hatchbox, et al to fit the Bambu Labs' AMS Lite rotary spool holder. Tested on A1 Mini using default settings for any given layer height and…
Anchor that screws into drywall, with internal thread for 8-32 bolt. Simply drill a ¼" hole in your drywall and turn the anchor in with a Phillip's screwdriver until the end is flush with the drywall. The threads in the center hole accept…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . By request, here is a solid,…
There's a model for a 48mm thread (usually from European 5-6l bottles) and for a 28mm thread (ex. Coca Cola bottle). Using a 48mm thread is recommended because the seeds don't get stuck Poke a small hole in the center at the bottom of the…
Find bolt thread pitches without threading them into internal thread checkers! Standard thread checkers where you thread the bolt into some internal threads can be problematic. When it's a close fit, it's hard to tell if a bolt is the…
The height of the leg can be adjusted from 43 mm to 71 mm.
Use case a cream jar for hand cream I have printed a whole bunch of these cute little threaded containers (Also because they are a great benchmark to check if your printer has a clean and even extrusion, which is apparently not always the…
A small jar to store some goods. There are jars with width 30mm and 60mm. The 30mm the have hights 15, 20 and 25mm. The 60mm width jars come in 20, 30 and 40mm height. After printing you should screw the jar and lid back and forth and…
Perfect for temporarily sealing hydraulic, pneumatic, or other system components during construction or maintenance, protecting against dust and debris. This design has been thoroughly tested in real-world applications, ensuring excellent…
Allows you to use large industrial spools of thread on a home/non-industrial sewing machine. Usage Place the holder on the right side of the sewing machine as shown on the third photo, Insert thread from the spool to the hole on the top…
I've modeled this container in blender. It actually threads surprisingly well. (water tight) Print Settings Supports: No Resolution: 0.2mm Infill: 20% Filament: Spectrum PLA Blue lagoon Notes: Printed with 50% original scale.…
I've applied harvdog92's threads from his threaded remix of Lalala65765's Dragon Egg box Chi to the Dragon Egg box Mi . I also added a chamfer to the inside lip to allow for printing without supports. Print both parts right side up, in…
A thread test block for coarse imperial threads (UNC). You can see if your printer is capable of printing threads. If the threads are good, you can use it later as bolt measuring tool too. I've also made a Metric version for this model:…
Category Part Quantity Fixings M5 Nut 6 Fixings M5 Washers 10 Fixings M3 x 10 CHS 10 Fixings M3 x 20 CHS 2 Fixings M3 Washer (optional) 8 Fixings M3 Nut 10 Fixings M3 x 8 CHS 1 Fixings M5 x 30 BHS 6 Fixings M5 x 8 BHS 10 Fixings M5 T Slot…
Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…
