Counting matching models…
Taking inspiration from my original fidget toggle switch , I designed a print-in-place version that uses about 8 grams of filament and takes about 20 minutes to print on my X1C. This model is experimental (it's definitely still a…
Assembly and Print Instructions This is set up in such a way that you can have different colours for the left and right sides even with a single colour printer. Backplate Use backplate_textless.stl if you want custom text, use…
https://www.printables.com/model/943743-wobble-toggle-fidget-switch-print-in-place
V1.0 I may need to update this model. But you are welcome to try it out yourself. Most likely, it would just need a slight scale adjustment. V1.1 Added taller slots for cables. V1.2 Moved switch slot 3mm
12 keystone patch panel for 10" rack + test piece to test fit. Blank keystone module. Cable pass keystone moduly in 3 / 6 / 9 mm. SMA bulkhead keystone module. Toggle switch keystone module. I recommend printing the test piece first to…
The Berker K1 frames have a special rectangular format. Standard Berker adapter frames for 55mm square switches don't fit with the Meross switch cover. Therefore I needed to design a custom switch cover. The cover snaps perfectly into the…
Made to hold a door closed, so hook is set at 90 degrees. I may upload a 180 version later for something like a trunk lid that needs hook and latch to be parallel. Also hook only has the 2 screws, restricted by my use case. If you're…
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional
This model is compatible with the lego system.
Another take on the over-center latch I needed for a specific door in a conversion van. This door has a corner I needed to get around, so it's designed for that specific spacing. I can change that a little, so if this is close to what you…
About the model: While making a new wall for a camping shelter, I needed more of these tent toggles. They proved to be hard to find in-store, so I quickly designed these and printed them out. Problem solved. Toggles are designed to fit…
A simple on/off toggle indicator. Perfect to use on dishwashers to indicate if the dishes inside are dirty or not! Assembly guide Instructions: Place parts C and D inside inside part B. Place part E on top of C and D inside part B (bigger…
Secure your fishing line spools effortlessly with this 3D-printed cord lock toggle. Designed for bungee rope loops
4g toggle switch, I recommend using PETG, ASA or ABS or another, higher impact resistance polymer. Prints in roughly 12 minutes. If using ASA or ABS, use a brim and increase fan speed for PETG due to a long bridge.
This model is compatible with the lego system.
Basic switch that can be hooked up to circuits for electrical projects, or just for fidgeting.
Assembly and Print Instructions This is set up in such a way that you can have different colours for the left and right sides even with a single colour printer. Backplate Use backplate_textless.stl if you want custom text, use…
Pas envie de laisser vos câbles et votre interrupteur se balader sur la table ? Support à visser conçu pour cet interrupteur à bascule 26X12 ,afin de réaliser un montage propre et sécurisé en prototypage. ✔ Maintien stable du module ✔…
How to make a linear spring with 3D printing that neither wears out over time or fails due to material limitations. I tried to overcome those challenges with this design, and it also just happens to be a somewhat useful device. Probably…
I redesigned this to fit a small shed I own. It is nearly identical to the original with all edges rounded and some improvements like a resizable shim under the "receiver" and strengthened the screw pillars. The holes are 4.3mm to accept…
This is a complete 100% remake, but its from the idea https://makerworld.com/en/models/2536740-vrchat-name-tag and https://makerworld.com/en/models/459425-vrc-nameplate-hanger-tag This model includes a source code, and easy in the slicer…
This gripper utilizes two gear pinions with pivoting linkages to move the fingers. When the gripper closes the linkages go past center, causing the fingers to “Knee Lock” in place. This gripper prints-in-place all as one piece with no…
Multi-position toggle clamp. Can clamp from 18mm to 80mm material. It all depends on the D16mm aluminium you will use. They offer 360° off freedom, and can be easily screwed on you working aera with 3,5mm screws. Great for woodworking,…
The original toggle head cover is prone to break due to being in a heated chamber. Print and use at your own risk! If the part breaks during a print, the Uprint could be damaged. I tested the fit with PLA so tolerances with other…
A replacement for a common type of ball-shaped, spring-loaded stopper, for tightening drawstrings on clothes, bags.
Toggle button skirt inserts with indicator LED for the Voron V2.4, Trident and Switchwire. Designed for 7mm or 8mm body “pcb mount push button latching switches” and 3mm LED. Momentary switches in this form factor also exist and would be…
https://www.printables.com/model/943743-wobble-toggle-fidget-switch-print-in-place
When I finally had found a really functional toggle latch on printables, fiddling with the support was disappointing and the clamp looked really ugly afterwards. Therefore, I changed it, so that the bracket needs no support anymore. The…
Recommended print settings: 4 vertical perimeters, 50% infill (there are very few places thick enough for infill), seam position: random. Brim for tip and barrel. Mechanism requires some break-in to start moving easily.
Simple enclosure for “Toggle Rocker Switch Panel, 5 Gang 12V Waterproof Round Toggle ON/OFF Switch Blue LED Fit for Auto Automotive Lights Car Marine Boat Yacht Trailer Caravan Camper Bus Tractor Truck Vehicles” e.g.…
Use a piece of rope as a belt. I use this for my bath robe. Toggle means you don't have to adjust and re-tie every time.
3D model of a stress-relief keychain switch, crafted with magnets. Ideal for soothing fidgety fingers! Magnets size: 5x2 mm
Some of our company truck's toggles went missing misteriously a while back. I decided to print replacements and replaced 1 broken too. I left one of the originals so you can check if it is the same model as yours. Printed with…
No supports required if printed face down. Mirror it to work on other side of switch.
My first take on this litte toggle switch, with a slightly different approach to the spring-unit. Works really good on a Prusa MK4s with the following settings: Material : PLA or PETG Nozzle Size : 0.4mm Layer Height : 0.2mm Infill : 15%…
All credit for this system of cover to toggle switches goes to the original uploader firstgizmo . Big thanks to you, for your model and your share of the step files. I only made changes to accommodate smaller toggle switches like these:…
This toggle is incredibly light and simple, yet very effective when needing to tension and secure a tarp ridgeline around a tree. With this toggle, you will not need to tie off any knots in the ridgeline and can be quickly and securely be…
Every morning when i am done with a particular daily routine (e.g. watering plants, taking medicine, etc), i toggle 1 of those switches based on the day of the week. Everytime when i'm not sure if i have done those or not i just look at…
This is my design of a clamp to hold down the center mount on the yaw vr motion simulator. The default solution can lift up quite easily when using a steering wheel or flight yoke. This will just clip on around the footrest arm near the…
I designed this to enable different lighting elements of a model railway, to be controlled by a separate switch located at the front of the layout sitting under the worktop. The Toggle switch is 10 x 11mm hole (approx) I have added the…
This model is compatible with the lego system.
This is an accurate recreation of a toggle switch guard used on the many control panels in the space shuttle. Included is a PDF are the part dimensions in case the standard thread dimensions of the switch are different from what you…
This is a recreation of a toggle switch guard used on the many control panels in the Apollo space capsule. I have also included two variations of the switch head, one with hole and one without. I recommend using a resin printer for the…
Hey there! My name is Jess and I designed this toggle clasp! Perfect for jewelry!
you need to print: 1 spring 4 pins 2 connectors 2 switch pieces and 2 box's Everything is press fit together so no need for glue, but this was made to work on my prusa mk4s, so your printer might need some modifications of the model to…
Models have been rotated to print in the correct orientation. to assemble, slide the “E” shaped piece into the base until both catches touch, then attach to the light faceplate with the screw that hold the plate on. set the light switch…
When organizing chores for children (or trying to optimize their morning/evening routines) I thought it would be useful to make a TODO list that could be used over and over - reset every time. Making it a physical object adds the…
I needed an inline switch for some 12v accessory lines on one of the printers. I had some 12v illuminated toggle switches that used a 20mm hole, so I drew up a housing to use them. No supports are needed during print. M3 cap head screws…
V1.0 I may need to update this model. But you are welcome to try it out yourself. Most likely, it would just need a slight scale adjustment. V1.1 Added taller slots for cables. V1.2 Moved switch slot 3mm
This is a mountable enclosure for a toggle switch. It was specifically designed for the Gardner Bender GSW-121 , however it should work for any similar toggle switch. Removable cover attaches with four m3 screws and has slots for four m3…
Eine praktische Hilfe für jede Werkbank! Der Kniehebelspanner ist sehr stabil, und in PETG gedruckt! Die Außen Wandung habe ich mit 15 Linien gedruckt so wird der Spanner richtig stabil! Der Gewindeblock sollte mit einer Stützstruktur…
My printer has a built-in spool holder, but it's a hassle to replace. When printing PLA or TPU, I take off the top cover and use this spool holder. Just download the holder from here and assemble it with screws.…
Printed flat on it's back without supports 100% infill and 4 perimeters, 0.2mm layer height. I used PETG for my print and expect it to last a while. It fit perfectly for my chair without any modifications to the part after printing.…
NB. The picture provided is with thumb toggle design change and I am yet to reprint this with the 0.7mm change from the top. First file: I shortened the height from the base by 1.7mm and the top by 0.7mm and changed the design for the…
I developed this project to split the power source from the auxiliary part cooling fan to my Carbon Chamber Filter when printing ABS/ASA. Required tools Soldering iron Heat set insert tip Required hardware 1 M3 Heat set inserts (M3x5x4) 1…
I printed a fidget toggle switch and fell in love. The click, the clack, it's on, it's off... amazing. The only issue was in my giant hands, I was unable to keep a grip on it. So I added a loopy ring and now it a perfect for one handed…
[Remix Adds] 1/30/25 Simply added a longer handle and turned the switch so it comes out of the size. It uses the base model in kriswillcode's original upload, and the handle is attached to it, so use the suggested settings on the original…
Holder for a toggle switch in your dashboard, so you don't always have to charge your phone when mounted on the quadlock charger. Makes use of “nut” of the existing USB charger. Print on 0.4mm nozzle in ABS ----------------------------…
Designed for toggle switches. Printed years ago in PETG - still looking good. My first design ever - I just had to do that myself because my damn colleagues did not want to do it for me though they are probably way better at this than I…
Put a hole in kriswillcode's fidget toggle switch to be able to use it as a keychain. 0,2 layer height 15% infill no supports
Bullet-Toggle as used by Advance for their paragliding cockpit attachments. Customizable in openscad. Source also available on github: https://github.com/bzed/openscad-parts/tree/main/bullet-toggle Print Settings Printer Brand: Creality…
My father-in-law's dog broke the button on his clothes. He wanted to fix it without pulling out the sewing machine, so I designed this snap together replacement! All you have to do is put the left over loop of yarn through the two holes…
Hi, this is my fully functional toggle button with integrated whistle. Perfect for keeping your coat closed and making noise if you need to. It's very loud. If you are more talented than I am, you could even use it to create melodies,…
A simple glue together design of a shield shaped coat toggle. I used 3DGloop to assemble. Scale to your preference!
This mounting plate is for 8 mxuteuk 8pcs SPST Mini Toggle Switch Miniature ON/Off Switch 2 Terminal 2 Position 6A 125V 3A from amazon. It is designed to mount under a table.
Marvel Moon knight Toggle While we all waiting for the Marvel Moon Knight series coming this March, I made a Moon Knight Icon Toggle suitable for jackets, bennies, etc. Print Settings & Notes Suitable to print with 0.15 or 0.1 layer…
Additional Hardware: 4 x M3 Bolt, 30mm 4 x M3 Nut 1 x M6 Bolt (Hex head), 30mm 1 x M6 Nut 1 x M6 Bolt (round head), 20-30mm IMPORTANT: The Hex head bolt needs to turn freely in the "Base" part, but needs to be fixed permanently to the…
Switchcraft Toggle Switch Cap 10-32. Printed in PETG with 4 walls
Printed in PETG and no supports. Part is designed to accept M4 Thread insert. I used these: https://www.3djake.de/cnc-kitchen/gewindeeinsatz-m4-standard
I wanted to do something a bit different for this weeks contest! How can one improve a jacket toggle you might ask? Fuzzy skin! adding that extra bit of grip you might need while giving a unique look. I also used glow in the dark filament…
A “toggle” style button. If this is going to be printer upright, it will need some brim because of the small base. If you liked this thing enough (and was hopefully useful!), please consider supporting me via Paypal in doing more stuff…
These beads are designed for quick release buckles on water sports equipment such as a harness on a buoyancy aid or a dump valve on a BCD for SCUBA. You can adjust the beads buoyancy and add reinforcement by adding a 25mm m6 or m8 penny…
Hello, This is the first design I have uploaded to Printables. I designed this from scratch using FreeCAD to enter into the Beads contest. I have printed this in both PETG and PLA and it seems to work with both, though PLA is a littler…
I couldn't find a good lock for toggle style light switches so I designed my own. It holds strong and can be rotated out of the way when needed. You may need a longer screw to hold it in place.
A perfect little toggle switch fidget toy to keep those restless fingers moving! I remixed PotaterSoupModel's model. Check out the original model here. Enjoy! -It would be really appreciated if you download, like, share, and post a make…
I use toggle switches on my CNC router to turn on the dust vacuum and spindle from the front of the machine. I wanted to guard the switches from accidental activation I also needed labels to identify what the switches activate. Center…
This is for a replacement foot/pad for a toggle clamp for a screw printing bed. that holds a screen frame in place they oven get covered in ink and break off it fits a 6mm ball but it should scale up. The file is there for anyone to ajust.
This is a bi-static toggle switch. Achieves a firm seating and click in place motion via compliance of the lower portion of the frame. Low friction due to rolling motion of the mechanism. Printed in PLA/.16 layer/.4 nozzle/0 top and…
Hi, this is a remix of (Lo²)² model Toggle clamp quick set hold down changed to fit GH-201-B toggle clamps. Since I didn't had a wing nut I used some knobs from one of my other designs. my print settings: - filament = Prusament PETG…
I really liked the design and adjustable angle of the LED’s but I wanted to use a simple toggle switch so i remixed it with a raised area for the switch. I also found the arms for the U-channel too tight (probably the tolerances on my…
Switch & Toggle – 2 in 1 Fidget is a compact stress-relief toy designed for those who love clicking, flipping, and fiddling! It combines a classic switch and a toggle mechanism into one fun design – perfect for keeping your hands busy…
Always felt the toggle switches used for my button box were a bit short so I made an extension that's 26.5mm long and is a press fit into the toggle switch. I'm using an off the shelf toggle switch that is ~10mm long and is 3mm wide at…
Simple extension for a flat toggle switch that is 31.5mm long. The toggle switch this was placed on is 5mm at it's widest and 12mm long. Since it's a V shape toggle, if you move it left/right it will rock some but otherwise it's a pretty…
has a addon for a 0.96 inch oled and two holes cut out for snap fit toggle switches with lights
I was looking for an easy way to set my toggle clamps when I saw this at Rockler : https://www.rockler.com/quickset-pressure-adapters . Since I already had some clamps from Harbor Freight and Amazon (…
Update Feb 12, 2022: Added chamfered version to match the original switch better. This is a remix of the original fidget toggle switch by kriswillcode. This version uses 4 8mm x 3mm or 5/16"x1/8" neodymium magnets to enable the switching…
Offset your toggle switch 6". Useful for when your switch is behind furniture.
This is a replacement switch panel for the Gaggia Classic using three panel-mount SPST toggle switches. The model was designed for Bulgin C3900BAAAA switches and it may need remixing to fit others. Print in PETG or another heat resistant…
A heart shape toggle switch cover. This should fit most standard North American single toggle switch plates. (You will probably have to remove your current Switch Plate.) Please make sure the switch cover will fit in your space. Some…
Each variant is optimized with dedicated print profiles to suit different filament types: Basic filament for standard materials. (PLA Basic) Matte and silk filament to accommodate the increased friction of these materials, ensuring smooth…
This print-in-place fidget toggle switch is a satisfying clicker that’s perfect for stress relief and fun. It prints in just 9 minutes and weighs 4.2 grams —no assembly needed! Great for fidgeters, desk setups, and stress relief! 🎛 Use…
