Search results: tolerance

Sort order

534 models

P
PrintablesGabbox3D

Complete 3D Printer test all in one (stress test, bed level test, retraction test, calibration test, tolerance test, support test)

The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…

Downloads
96,877
Likes
12,678
Rating
4.89
P
PrintablesGameRank

Tolerance test

>>> Updated to V2. more consistent channel clearance (see sketch image). 0.4 stamp is also moved to bottom now for consistency with other dimensional stamps. It's my take on tolerance test. It's a tolerance test with a taste of fidget…

Downloads
7,580
Likes
367
Rating
4.93
P
Printablesjczuba

Tolerance test

Desired tolerances differ depending on the print orientation of the pieces you are fitting together. This tolerance test lets you test out tolerances for a variety of combinations of holes/pegs printed with axes parallel and perpendicular…

Downloads
1,085
Likes
63
Rating
4.83

Würfel Cube Puzzles, 3 Difficulties, Enlarged, Labelled, Improved Tolerances

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a remix of Cube-Maker's…

Downloads
1,050
Likes
314
Rating
4.91
P

Clearance and Tolerance 3D Printer Gauge : 0.15-0.50mm

Here's my design of a Clearance and Tolerance 3D Printer Gauge . Drawn in Fusion 360 Print instructions ¤ Use .3mf or .gcode for presliced settings. ¤ Print in Prusament PETG Galaxy Black and Prusament PETG Signal White ¤ Use Prusament…

Downloads
1,010
Likes
50
Rating
4.5
P
PrintablesNikola

Tolerance TEST (test fit)

The pin is 10 mm, the holes are 9.8, 9,9, 10.0, 10.1, 10.2 mm. Print with Ironing on top leyar. There is a model with one hole 12.0 mm and pin 12.0 mm Thanks

Downloads
874
Likes
51
Rating
4.67
P
Printablesch1a

Mechanical Counter: Adjusted Tolerance

I love this tally counter but the fit of the parts out of my printer was too tight for it to operate. I fiddled with my printer a bit, but figured I could use the practice so I traced the models in to Fusion 360 and adjusted the…

Downloads
490
Likes
63
Rating
4.5
P
Printablesiobotic

Extrusion and Assembly Tolerance Test

This is an 'extrusion and assembly tolerance test' designed to check the minimum visible extrusion capability and the minimum distance required to assembly pieces working with a 0.40mm standard nozzle. The units of the numbers below the…

Downloads
317
Likes
45
Rating
5
P
PrintablesAndreas G

Wingnut Knob - to tighten the tolerances down

Wing, winged, thumb or butterfly nut knob to perfectly adjust the parameters and tighten the tolerances down :) V1: Modified original prusa knob (MK3S) 15.07.2022: Added V2 - redesigned clamping geometry for various potentiometer heights.…

Downloads
266
Likes
132
Rating
4.83
P
PrintablesKarnEdge

Filament Sample Swatch (w/ Address Labels and Tolerance Tests)

This is a Filament Swatch that allows for use with address labels. Swatch includes tolerance tests for bridging (5, 10, 15, 20mm), walls (0.5, 0.8, 1, 1.5, 2mm), transparency (0.2, 0.4, 0.6, 0.8, 1, 1.2, 1.4, 1.6, 1.8, 2mm), overhangs…

Downloads
226
Likes
56
Rating
5
P
PrintablesTeteomat

3D Printer Test – Bridging, Overhang, Tolerance & Accuracy Benchmark

This all-in-one 3D printer calibration test is designed to evaluate and improve your FDM printer performance quickly and accurately. The model includes advanced tests for bridging, overhangs, dimensional accuracy, tolerances, bed…

Downloads
133
Likes
8
Rating
5
P
PrintablesReferentiel

Clearance and tolerance gauge

It is a valuable tool for determining what you need to use in your designs to create moving parts without them fusing together. It features gaps from 0.10mm to 0.5mm. Find the part you need in my collection! Enjoy!

Downloads
132
Likes
32
Rating
5
P

Clearance and Tolerance 3D Printer Gauge : 0.05-0.25mm

Here's my design of a Clearance and Tolerance 3D Printer Gauge . Drawn in Fusion 360 Print instructions ¤ Use .3mf or .gcode for presliced settings. ¤ Print in Prusament PETG Galaxy Black and Prusament PETG Signal White ¤ Use Prusament…

Downloads
128
Likes
17
Rating
5
P
Printables3DMakerNoob

Clearance Tolerance Test

Inpired by Maker's Muse's tollerance tests, this is a smaller version to test your printer clearance capabilities

Downloads
76,667
Likes
7,221
Rating
4.95
P
PrintablesAsraff Amzani

Tolerance Coin

There are 2 types that most users would print to benchmark their printer as well as giving to other 3d printer owners; tolerance test object and maker coin. This is a combination of both tolerance test and maker coin where you can print…

Downloads
14,106
Likes
1,684
Rating
4.87
P
PrintablesBarcode3D

50% Reduced Print Time and Plastic + Separate Models - Complete 3D Printer test all in one (stress test, bed level test, retraction test, calibration test, tolerance test, support test)

Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…

Downloads
8,771
Likes
691
Rating
4.87
P
PrintablesWindrose

Print in Place Tolerance Test

This is a tolerance test for print in place hinges. These are the same style of hinges I use in my Articulated Hexapod , Pop-up Catapult and Latching Box print in place models. Depending on the model, different levels of hinge tightness…

Downloads
8,651
Likes
1,387
Rating
4.94
P
PrintablesA_Str8

Printer Tolerance Test

I needed a way of knowing how various parts that I designed would fit together without a bunch of trial and error and wasted filament, so I designed this test. The markings on the test show the clearance in millimeters for each set of…

Downloads
7,466
Likes
536
Rating
4.92
P
PrintablesVC Design

M6 Bolt and Nut - 6 variations / Tolerance Test /

28/08/24 : Improved Tolerance with the V2 Nut

Downloads
5,716
Likes
1,095
Rating
4.6
P
PrintablesJeff

Tolerance Test

Simple, but effective, clearance tolerance test. Round pegs can be pushed out or pulled out. The box measures 80mm x 20mm x 10mm and the pegs are 15mm x 10mm so you can check dimensional accuracy as well. Mar 9, 2021: Added a smaller…

Downloads
4,618
Likes
190
Rating
4.95
P
PrintablesVC Design

M5 Bolt and Nut - 6 variations / Tolerance Test /

28/08/24 : Improved Nut Tolerance

Downloads
3,421
Likes
573
Rating
4.13
P
Printableseliobou

Tolerance Tester

Description A simple tolerance tester that let you choose the correct fit when designing your parts or calibrating your printer. The numbers are in mm from 0 to 0.5mm of tolerance. You can try both square and circle shape both 10mm…

Downloads
2,865
Likes
442
Rating
4.96
P
PrintablesFunky3D

Tolerance test

Understanding the tolerance It's an additional gap left while designing in order to make moving parts move freely and as smooth as possible without being too loose at the same time, like holes, screws, connectors… It has to be considered…

Downloads
2,132
Likes
116
Rating
4.85
P
PrintablesHawwwran

Tolerance gauge / Fidget toy

Minimal distance tolerance gauge. How low can your printer go? The distance between the rings is getting smaller by 0.1mm towards the center starting with 0.5mm, ending with 0.1mm. Each ring is marked by a number marking the size of the…

Downloads
2,105
Likes
290
Rating
4.79
P
PrintablesKeep Making

Crystal Clearance Tower & Tolerance Card

A quick and straightforward print to test your 3D printing clearance / tolerances.

Downloads
2,071
Likes
184
Rating
4.95
P
PrintablesOGRE_Cubes

Print in Place Tolerance Tester

Test your Print in Place tolerances with this slider and peg. Each of the sliders has 0.XXmm gap on both sides of the slider and the same amount of space for the peg. You can use this to influence your print in place design decisions.

Downloads
2,025
Likes
236
Rating
4.91
P
Printablesjpdesign

Tolerance/Clearance Test

There is a new version available here . A simple tester for your printer tolerances. Start with the normal file, if you cannot break out any of them, than you can print the other file, which has bigger/looser tolerances. When printed, try…

Downloads
1,910
Likes
86
Rating
4.58
P
PrintablesMatt Boyer

Tolerance Test - Prusa Performance Level

This is a real test of the accuracy of your printer. Most tests have a gap range of .15 mm (.0059") to .50 mm (.0197"). That's a wide range and it's targeted for a wide array of printers. With advancements in printer and slicer technology…

Downloads
1,669
Likes
224
Rating
4.88
P
PrintablesMeister Edel

Slim All in One Calibration & Tolerance Test

Heyho There are many cool tests out there to check your tolerances and other critical limitations to your printer. I love them since you can simply dial in the settings for new materials with them and be sure that your prints will be in…

Downloads
1,631
Likes
242
Rating
4.91
P
PrintablesZelrick

Quick Tolerance Test

I designed this quick tolerance test to have a fast print to use once printer calibration is done. Used in combination with my 30mm test cube( https://www.prusaprinters.org/prints/39965-30mm-test-cube ) you can get a very good baseline on…

Downloads
1,564
Likes
88
Rating
5
P
PrintablesVC Design

M14 Bolt and Nut - 6 variations / Tolerance Test /

M14 Metric style bolts in 6 variations: 8, 16, 20, 25, 30, 35 mm thread length. 1 style nut. Use 40% infill.

Downloads
1,490
Likes
365
Rating
5
P
PrintablesTombry

CS:GO Karambit with looser tolerances

I have printed the original from Dani Projects and as I wanted to glue the handles together, they wouldn't close fully. So I added some distance (total 1,2 mm) to them and it worked like a charm with no need of cleaning up. Use supports…

Downloads
1,311
Likes
89
Rating
5
P
Printablesjpdesign

Tolerance Tester 2.0

This is the 2nd variation of my tolerance tester . If you have any suggestions, please comment. On my Ender 2 Pro i was able to move all of them, just the .05 was a little harder. Changes: It now uses less than a quarter of the material…

Downloads
1,260
Likes
69
Rating
4.55
P
PrintablesColton

Tolerance test

0.3mm - 0.1mm Tolerance Test in 20Minutes

Downloads
1,100
Likes
29
Rating
4.7
P
PrintablesSteveJohnsen

3D Printer Tolerance - Gap Test - Regular & Compact Versions

NOTE: To print this model correctly, after importing the .stl into your slicer, you must split it into objects. If you don't, the slicer software will likely make the 0.1mm button part of the body, making separation impossible. The method…

Downloads
1,084
Likes
49
Rating
5
P
PrintablesZellor

HG Gundam Stand with Extra tolerances

Edit of the original design to have a perfect fit for your average printer. hole on the arm is designed to fit a spru snipping. all i did was edit the size of the hole on the arm for better tolerances, after 2 test prints it fits perfect…

Downloads
889
Likes
75
Rating
5
P
Printablesgeodave

Better Tolerances on Reindeer Christmas Card

I really liked this design, but after printing it, I had to use a jewelers file on all the notches for them to fit & they were still quite tight. I created a sketch in fusion 360 with the base profile of this. Changed the notches from…

Downloads
861
Likes
137
Rating
4.88
P
PrintablestbkMAKER

Finger/Hand Grip Strengthener + Tolerance Test

First thing I want to say is, you're going to be surprised how much force it takes to push these buttons down. If I turn this on its end and try and push all 4 down at the same time, it probably takes a good 25lbs of force to compress all…

Downloads
827
Likes
184
Rating
4.86
P
PrintablesMD Design

Tolerance Test

3D printer Tolerance Test This model was tested with a 0.4mm nozzle. My printer was able to print 0.2 tolerance. Can be used for 0.4 and below nozzle.

Downloads
821
Likes
30
Rating
5
P
PrintablesMichael Winston

GUN - Gravity Utility Knife V1.1 - Nut Adjusted Tolerances

The original model was great but I found that I was having trouble getting the screws to grab the nuts so I made some tolerance adjustments to allow them to grab better. If you are having this issue, here is your solution. Simply replace…

Downloads
809
Likes
330
Rating
4
P
PrintablesLimitSwitch

LEGO Technic Compatible (Perfect Tolerances!)

LEGO Technic Parts (Perfect tolerances!)

Downloads
720
Likes
237
Rating
5
P
PrintablesJemmenich

Tolerance Test

A 3D printer tolerance test is a crucial step in assessing the accuracy and precision of a 3D printer's output. It involves printing a designated model with specific dimensions and examining the resulting object for any variations or…

Downloads
589
Likes
26
Rating
0
P
PrintablesTitan3D

Tolerance Test

Quick and fast tolerance test print to determine printable tolerances.

Downloads
585
Likes
25
Rating
5
P
PrintablesJ Lake 3D

S Shaped Tolerance Test 0.1-0.4mm in 0.02mm Increments

A tolerance test to see if you can print bearings. Most of my bearings are 0.2mm tolerances because thats what seems to work best. This test is incremental by 0.02 and based on my round test. UPDATE: Added an attempt at a model with some…

Downloads
554
Likes
31
Rating
5
P
PrintablesRenegade1328

Better tolerance Honeycomb stackable Shelf for Tonie Figures (remixed)

Das Orignal hat leider eine falsche Toleranz. Die Steckverbindungen in Form eines Trapez haben auf der langen Seite 1,2mm Toleranz und auf der kurzen Seite 0.2mm Toleranz. Dies hat zur Folge, dass das Original extrem schwer zusammen zu…

Downloads
543
Likes
103
Rating
5
P
PrintablesDJEuthyphro

Penny Tolerance Test -- No Calipers

Penny Tolerance Test -- No Calipers Determine your printer tolerance with a United States penny. If the penny fits, then you've achieved the tested tolerance. If the penny doesn't fit, then your printer is printing too large or small.…

Downloads
525
Likes
51
Rating
5
P
PrintablesGero

Creality K1C Reduced Wobble Cable Chain Mod - Better Tolerance

The original washer is too low and loose + head screw housing in the chain cable is to large. So the cable chain is not firmly in piece one the toolhead, and it wobble when printing. This simple mod fix this issue, also helped me…

Downloads
519
Likes
70
Rating
5
P
Printablesjhnphm

Emporia Vue V3 ESP home flash jig w/ fixed tolerances

I had difficulty assembling the original jig with the suggested pogo pins, as the holes were too tight when printed with PETG. I added about .45 mm to the diameter of the holes in the jig, and sunk the screw holes in so that the original…

Downloads
510
Likes
39
Rating
4.67
P
PrintablesSPD3D

MMU2S Color / Tolerance Test

Used for testing the color change in the MMU2S and the tolerance between colors/parts Print instructions Layer: 0.2 mm No support

Downloads
500
Likes
19
Rating
4.56
P
Printablesoufzor

Filled Clearance Tolerance Test (Remix)

I quite like this Tolerance Test by 3DMakerNoob but sometimes I like to add notes directly on the prints when doing some setting tests. The original model shape was too limiting due to all the curves so I simply filled it. Material…

Downloads
499
Likes
23
Rating
5
P
PrintablesDraco

Deburring Tool Case Remix for AFA Tooling AFA4000 (Now with looser tolerances)

The bottom recess will fit a single 8x3mm magnet. I'd recommend printing with PETG if possible (less brittle). The original model was designed for assembly as opposed to print-in-place. Printing the parts separately will likely yield…

Downloads
467
Likes
58
Rating
4.73
P
Printables3D-Dengineer

Simple Push Fit Joint Tolerance/Fit Test (Male/Female)

This is a simple print you can use to test the tolerances and how tight you want the fit when designing 3D models with push-fit joints. They are also keyring mountable/atachable! It is reccomended you print a normal tolerance test first,…

Downloads
439
Likes
20
Rating
4.5
P
PrintablesLearn As You Go

Hole Tolerance Gauge For Designing 3D Prints With Screws and Eccentric Nuts M3, M4, M5, M6, M7, M8

This is a tolerance gauge for sizing holes in 3D prints. The hole sizes are 3mm to 8mm with 0.0mm to 0.3mm being added in each column. It is used by placing a screw or other object in one of the holes to see which on has the best fit.…

Downloads
422
Likes
39
Rating
4
P
Printablesgiobber

Gridfinity CR2450 Battery Holder 1x1x2 (with various tolerances)

I have bought a couple of sonoff zigbee sensor (SONOFF SNZB-02) after some aqara sensor start failing, but differently from the latest they use the CR2450 batteries instead of the more common CR2032 I search printables and thangs for a…

Downloads
407
Likes
34
Rating
5
P
PrintablesEcholalia

DIY miniature Guillotine kit card model (Tweaked - friendly tolerances.)

I really enjoyed the original model by Severeon , and I wanted to print it for a friend. However, I found it a little difficult to assemble without my tools (I'm just not sure what tools this friend has available to them), and I didn't…

Downloads
407
Likes
122
Rating
5
P
PrintablesColton

Tolerance Test

0.6 to 0.1 mm

Downloads
397
Likes
13
Rating
4
P
Printablesfoglie0p

Threads tolerance test

This is a quick print to see how well your printer can print threads. Ranges go down from M20 to M16 to M12 to M10 to M8 with an M6 to finish it up. Print settings: 5% infill 2 perimeters 0.15 - 0.2mm layer height All parts should thread…

Downloads
395
Likes
36
Rating
4.5
P
PrintablesPrismaPrints

Simple Tolerance Test

Recommended to print with a lower number of walls/perimeters. Uses about 15g depending on settings, no need for infill.

Downloads
390
Likes
34
Rating
5
P
Printablesgrizzie17

Printer Tolerance Test

Simple model to identify tolerance issues for your printer.

Downloads
385
Likes
25
Rating
5
P
PrintablesJossie

Nintendo switch game holder - Remix more tolerance

Simple insert that hold 20 Game-cards and fits in the Twist open mushroom from @3Dprinty Original design by @Bengone1 only altered to have a bit more tolerance because mine did not fit the game-cards

Downloads
384
Likes
76
Rating
5
P
PrintablesTommy3D Lab

Tolerance Test - Print in Place

Does your filament really fit? 🔧🎯 While developing my Next-Gen BB Shooter , I ran into an annoying problem: My first prototype worked perfectly with PLA Basic White but when I switched to PETG HF Gray , the mechanism suddenly started to…

Downloads
376
Likes
40
Rating
5
P
PrintablesDarthxRinzler

AMS Rear Rollers: Forgiving Tolerances Edition (Stock AMS)

Quick remix to include sizes for stock AMS for those of us that don't have the Hydra. These fit and spin better than the originals. Add more height clearance in your stock AMS. Print 1 roller and 2 sockethead casings each. Uses two M3 x…

Downloads
369
Likes
40
Rating
5
P
PrintablesAtoi

Hinge tolerance test (build-in-place)

Hi, I couldn’t find a decent hinge tolerance test for print-in-place hinges, so I made one myself. This test is great if you want to model your own hinges but don't know what size of the gap you need. Feel free to use and modify it…

Downloads
367
Likes
36
Rating
5
P
PrintablesSpankyty

CD ROM Mini CNC Drawing Plotter With Better Tolerances

My 3mm Rods did not fit right so I made the holes a bit bigger. I also combined the motor connector to the carriage so you don't need extra work for yourself. Print instructions Resolution: 0.2mm Infill: 20%

Downloads
350
Likes
40
Rating
0
P
PrintablesFusedForms

Tolerance Gauge/Tester | 0.05mm - 0.50mm

RECCOMENDED PRINT INSTRUCTIONS: 0.2mm layer height, 3 walls, 15% infill Model will appear in slicer rotated 180 degrees x/y direction. Please rotate so numbers are facing upwards before printing to ensure accurate results This is a quick…

Downloads
348
Likes
29
Rating
4.5
P
PrintablesRobert Eliason

9V Battery Holder - Updated with better tolerances

Protects your 9V batteries and keeps them from accidentally shorting when transported! Now with better tolerances for the lid and batteries. Print instructions Category: Containers Print Settings Printer Brand: Prusa Printer: i3 MK2.5…

Downloads
335
Likes
19
Rating
4.45
P
Printablesethereal_sky

Filament Dust Filter (additional 0.1mm Tolerance)

I was having issues getting the hinges to print properly without them fusing together even with modifying flow and resolution on my Ender 3. I added an additonal 0.1mm gap on each side and it seems to print perfectly. Print Settings…

Downloads
333
Likes
30
Rating
5
P
PrintablesShmoee

Tolerance Tree

I put a flat edge on one side to optionally print vertically and included a selection of various tolerance tests. The cylinders are designed to pop out if tolerance is adequate. There is a taper on the bottom to avoid any first layer…

Downloads
328
Likes
24
Rating
5
P
PrintablesMete

Tolerance Test

A simple test to investigate printing tolerances, based on Brad Tallis's video here: https://www.youtube.com/watch?v=rUo3mNhCzkU . The top-left hole on the board (top-left is where the notch is) has 10.00mm diameter, going right and then…

Downloads
316
Likes
31
Rating
4.67
P
PrintablesKaraneko

tolerance test

tolerance test for 0.1 mm, 0.15 mm, 0.2 mm, 0.25 mm, , 0.3 mm, 0.4 mm fusion file on gumroad karanekoart.gumroad.com/l/tolerance

Downloads
316
Likes
13
Rating
5
P
PrintablesShmoee

print-in-place-kaleidocycle remix to loosen tolerance to allow 0.28 layer height and/or scaling down

Update 7/8/2022: I adjusted the scaling down uniformly to 65% scale in the Cura slicer and printed at 0.20 layer height using 100% infill. It took 1:52 minutes to print (80mm/s print speed, 40mm/s wall speed, and 100mm/s travel speed). It…

Downloads
310
Likes
37
Rating
5
P
PrintablesLukeOne

Mighty Vaporizer Stand with Brush Holder (UPDATE v2 with tighter tolerances)

Have Fun EDIT: Added a v2 with tighter tolerances. Category: Organization

Downloads
306
Likes
18
Rating
5
P
PrintablesSteveJohnsen

3D Printer Tolerance - Gap Test - Lite & Extra-Lite Versions

NOTE: To print this model correctly, after importing the .stl into your slicer, you must split it into objects. If you don't, the slicer software will likely make the 0.1mm button part of the body, making separation impossible. The method…

Downloads
305
Likes
15
Rating
5
P
PrintablesNick Rivera

Remixed Makita Trim Router to Track Saw Rail Adapter - Tight Tolerance with Guide Bushing Geometry

This is a remix of the Tracksaw Guide plate/adapter for Makita Trim Router by @JohnMartin . This is still a work-in-progress, further fine tuning tolerances. In this remix, I made the fit of the grooves for the track saw guide rail a bit…

Downloads
303
Likes
40
Rating
0
P
PrintablesEric

Voron Stealthburner umbilical-Increased Tolerances

I had a slight issue printing the original one as the threading would not fit my strain relief so I quickly increased the tolerances and now the PG7 fits well.

Downloads
297
Likes
30
Rating
5
P
Printableslysithea81

Sliding Tolerance Test with Mini Version

Printers can vary considerably in their tolerances, i.e. how much extra space is necessary between parts designed to fit together. In an ideal world this number would be zero, unfortunately it's something we all have to worry about, and…

Downloads
290
Likes
26
Rating
4.5
P
PrintablesSgt. Chaos

Beefy E14 Socket Nut / Shade Ring - Looser Tolerance

This is a replacement shade ring (nut) for standard E14 lamp sockets (M28 thread). I designed this to be a bit beefier than the original stock rings, which often crack over time. I also designed it with looser tolerances than many other…

Downloads
285
Likes
33
Rating
5
P
Printablesak

Perfect circles! More accurate iris compass (with 20 leaves and better tolerances)

For best results, it is recommended use some lubricant and/or use more slippery materials for the leaves, but it still works fine without any lubrication. This design uses the same leaves as the original.

Downloads
280
Likes
37
Rating
4.33
P
Printablesb

USB C PD Trigger Board Enclosure - fixed tolerances

Case for MRA193A USB type C power delivery (PD) trigger board, available for very cheap on sites like AliExpress, eBay, etc. Uses minimal filament and snaps together easily. I printed it in PETG with variable layer height and "standard"…

Downloads
279
Likes
53
Rating
5
P
PrintablesDaVinci2000

Fidget Tolerance Test Lite

Looking for a super economic and fast printing version of tolerance test for your printer that not only will do its job but let you have some fun afterwards? Here it is! 45 mm in diameter, 7 mm high, it requires only ~6 g of filament and…

Downloads
277
Likes
12
Rating
5
P
Printablesjoncruz

Basic Tolerance Test

A very simple tolerance test for people wanting to dial in their settings for print-in-place prints, etc. I found a few interesting test pieces, but they would take around four hours to print on my printer. This one is only 18 minutes on…

Downloads
275
Likes
11
Rating
5
P
PrintablesBrewe

Tolerance guage

Quick print to test the gap tolerance of your printer

Downloads
274
Likes
17
Rating
5
P
PrintablesАрсений

orca slicer tolerance test

This orca slicer tolerance test helps you to know the abilities of a 3d printer and its filament

Downloads
272
Likes
11
Rating
5
P
PrintablesGabriel

Low weight Tolerance clearance test 0.00mm - 0.3mm

Low weight Tolerance test 0.00mm - 0.3mm

Downloads
263
Likes
19
Rating
5

Push Fit Tolerance Test

Ever wonder how tight a fit your printer can actually handle? For a long time, I had just experimented and figured out those tolerances by trial and error, mentally recording the one that worked. Eventually, when sharing files, however,…

Downloads
260
Likes
26
Rating
4.67
P
PrintablesRB3D

0.1mm Tolerance Test

The gap between the wheel and the rim is only 0.1mm. Achiving a spinning print means your printer can handle tolerances incredibly well. Happy Printing:) Print instructions I printed it in Prusament galaxy silver at 0.15mm layer height.…

Downloads
259
Likes
21
Rating
5
P
PrintablesPascal

tarmo 5 steering link lower tolerances

i had an issue with a to loose steering link that is when i made this change that made the tolerances higher

Downloads
256
Likes
20
Rating
5
P
PrintablesAdam L

AMS Hydra Rollers: Forgiving Tolerances Edition

I liked the improved rollers @humebeam posted, but I was having some real issues with them functioning properly: They tended to rub against certain slots in the hydra which reduced their rolling smoothness (e.g. second from back slot…

Downloads
242
Likes
39
Rating
5
P
Printablescoolcow

Screw tolerance test - 45 degrees - 0.20/0.25/0.30/0.35 mm

Just a little thing to test out which tolerance i have to choose when i make models with screw threads... Category: 3D Printing Tests

Downloads
242
Likes
24
Rating
5
P
PrintablesDeAuthen

Printer Tolerance Test - Optimized, Faster Print and Less Filament

I used this model but i thought it took a bit to long so i took it on myself to try to fix it by making it a bit faster I added holes to the pegs to make them lighter and i made the test thinner, i also added another version of the test…

Downloads
238
Likes
8
Rating
5
P
PrintablesLeisureLuke

Tolerance Test Print by Leisure Luke - Can you push it through?!?

Hey Everyone, This is my test for a new printer, new filament, or even new slicer settings. I use this all the time, and I figure if it helps me, maybe it will help you too. This is a nice hands-on way to see if you'll have success when…

Downloads
235
Likes
38
Rating
4.67
P
PrintablesNadir @ CN3D

Fast tolerance test

The Idea for this test is to see how capable is your 3D printer to print the upgrades we are designing for. No one want to see after printing a lot of part that they are not fitting. If after you print this fast tolerance test you will be…

Downloads
234
Likes
48
Rating
4.8
P
PrintablesAlbertW

Thread Tolerance Test

Do you want to test how good your printer prints? If the bolt dosen't fit, print the bolt about 3% larger! The thread is an M16x20MM Type in the comments if you want to see a longer screw! Also if you see any mistakes, feel free to give…

Downloads
233
Likes
18
Rating
5

Tolerance test, test de tolerancia

An hexagonal tolerance test that is very tiny, it goes from .1mm to .7mm, and its tiny and fast and tiny!! you check the tolerance by the amount of pieces that didn't fell, if 3 got stuck, the tolerance is .3mm

Downloads
232
Likes
11
Rating
5
P
PrintablesBeeks1996

1/4" x 20 Bolt + Nut Tolerance Test

I made this to see if my E3-Pro could print a 1/4x20 bolt at full speed (0.1mm LH) and have it be accurate enough to thread into a camera. It has an added tolerance of 0.1778mm to keep the threads from binding with the included nut. Bolt…

Downloads
228
Likes
7
Rating
0
P
Printablesw3rN42

Threaded Inserts Tolerance Test M3 (normal and short)

These are two test blocks for M3 threaded inserts. the first is for normal sized M3x5.7 the second is for small sized M3x4.0 The inner diameter of the holes is 3.8 / 3.9 / 4.0 / 4.1 / 4.2 millimeters to test which one fits best. I used…

Downloads
227
Likes
14
Rating
5
P
PrintablesJackTheBuilder

Pass Through Fidget Cone reg tolerance

Make Sure to Print in a hard material such as PLA or PETG, print in 2 separate parts, it looks best with 2 different colors. There are 2 versions, big and small tolerance version so it should work on the majority of printers.

Downloads
225
Likes
7
Rating
0
P
PrintablesJason Cohen

Portable Cable Winder with looser tolerances- Medium

This is a remix of the Portable cable winder with larger gaps between the print in place parts.

Downloads
224
Likes
7
Rating
0
P
PrintablesRetro_CHR

Fidget Tolerance Test

Looking for a super economic and fast printing version of tolerance test for your printer that not only will do its job but let you have some fun afterwards? Here it is! 45 mm in diameter, 7 mm high, it requires only ~6 g of filament and…

Downloads
214
Likes
12
Rating
5
P
PrintablesDarklyte

Spirit Island Accurate Blight Token (tighter tolerance)

A remix of Daniel Cox's amazing upright accurate blight tokens. Designed to stand upright, both pieces should be printed flat on the print bed. My remix provides a tighter tolerance and easier long term assembly. The base of the upright…

Downloads
212
Likes
26
Rating
5