Search results: toolhold

Sort order

240 models

P
PrintablesSuper7

Ryobi 18v Toolholder

Ryobi 18v Toolholder with retaining clip. Suitable for most Ryobi 18V handheld tools. Parts can be printed in place if using the same colour. Minimal support needed under the clip and under the housing area where the clip assembles. You…

Downloads
1,952
Likes
394
Rating
5
P
PrintablesJonas

Prusa Mk3S Toolholder

I decided to make a toolholder that simply clicks on the frame and rests on the power unit. It holds all the tools that comes with the printer kit! I also added room for a key that I use for nozzle changes. so there's room for 4 alan keys…

Downloads
1,795
Likes
295
Rating
4.68
P
PrintablesBunsenbrenner14

Thermomix Toolholder

A toolholder for Thermomix accessories for the TM 5 but it should also work on the TM 6. Feel free to make a remix. If it does not fit on your printbed then split it into 2 parts with the step file and glue it afterwards together. On the…

Downloads
1,780
Likes
201
Rating
4.88
P
PrintablesSolidKnow

Makita 18V Toolholder

This is a tool holder for Makita 18V tools. I have developed it on a normal holder. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment: Makita Logo upwards Legal information: This…

Downloads
1,575
Likes
57
Rating
4.5
P
PrintablesImitheo

Ender 3 V3 SE Toolholder

The tool holder is made for Creality Ender 3 V3 SE 3D printer. Two variations were made, both to be installed on the left and right sides.The support is fitted with pressure, it requires a little force and the fitting measurement of…

Downloads
1,397
Likes
258
Rating
4.88
P
PrintablesBarebaric

Gridfinity toolholder collection 3: Drills, countersinks and tap drawer

After my first and second toolholder collection, here is the third one. This one contains storage for drills, taps, dies, and countersink bits . All trays have a height of 3 units and are not stackable . (You may put them on top, but not…

Downloads
1,057
Likes
424
Rating
5
P
PrintablesMrBlue

Flsun V400 Toolholder

Print with PLA, no support, i printed it with 4 walls. The Gripper is not perfect but holds tight.

Downloads
879
Likes
89
Rating
4.75
P
PrintablesHeine Sørensen

Worx toolholder

Print in PETG and keep the walls plentyfull. Enjoy and happy printing

Downloads
861
Likes
80
Rating
5
P
PrintablesSteffen

Thermomix Toolholder TM6

I changed the hole for the spade. Because at the TM6 it´s a bigger version. And I add a O-Ring 3,5x85mm that it fitts better. I had the problem that the holder has not held well with me at the Thermomix. Now it´s fitts perfect at my TM6.

Downloads
818
Likes
82
Rating
4.25
P
PrintablesChrisi999

Werkzeughalter PRUSA XL / Toolholder PRUSA XL

Es handelt sich hier um ein einfach zu druckendes Modell für einen Werkzeughalter für alle relevanten Werkzeuge für den Prusa XL. Ich habe es aus PETG Prusament Orange gedruckt mit 250°C. Kein Support benötigt. This is an easy-to-print…

Downloads
723
Likes
128
Rating
4.38
P
PrintablesJH3D

BOSCH GWS 12V-76 Toolholder

Stl - Daten des BOSCH GWS 12V-76 Toolholder aus Thingiverse Link: https://www.thingiverse.com/thing:3971430 Danke an das Original. Ohne Support gedruckt.

Downloads
699
Likes
110
Rating
4.86
P
PrintablesA U

HSW Creality K1 Toolholder

An HSW organizer for Creality K1 tools.

Downloads
595
Likes
166
Rating
4.25
P
PrintablesZavadnoy

ISO30 Toolholder Clip

ISO30 Toolholder Clip

Downloads
574
Likes
16
Rating
5
P
PrintablesNeozoen

Neo Thermomix Toolholder

Update: I added two support arms for better stability. The arms in Version v11 are a little bit shorter. I split the design in two parts and made holes for M4x20 srews. Prints without any supports. Updated version also has some chamfers…

Downloads
551
Likes
82
Rating
5

Milwaukee M18 Toolholder

Toolholder for Milwaukee M18 machines - Remove the battery and mount the machine The model is mounted with four screws. One model for machines with beltclips and another for macines without From my experience the following settings are…

Downloads
521
Likes
59
Rating
5
P
PrintablesMrC

Anycubic Kobra Neo Toolholder

Modified for allan keys, wrenches and needle for unclogging the nozzle.

Downloads
459
Likes
54
Rating
5
P
Printablesz³D

MT1-z³D Multi Toolholder for Skadis and HSW (drill bit / HEX bit / Allenkey / Allen key holder)

Multi Toolholder for Skadis and HSW (drill/bit/allen) In this download you will find two Versions. One for IKEA Skadis, and one for the HSW Honeycombe This Toolholder will give you 19 slots for Drills (1mm-10mm 0.5 steps) 31 slots for hex…

Downloads
438
Likes
94
Rating
5
P
PrintablesWaldmops

Original Prusa Enclosure Toolholder / Werkzeughalter

This a Collection of three Holders ! https://www.printables.com/de/model/500721-original-prusa-enclosure-steelsheetholderdruckplat https://www.printables.com/de/model/504312-original-prusa-enclosure-bottle-and-glueholder-fla

Downloads
421
Likes
97
Rating
4.88
P
PrintablesMayrM

Anycubic Kobra Go Toolholder/organizer

A simple print to hold all the included tools and accessories

Downloads
397
Likes
26
Rating
4
P
PrintablesKIL0

Mk4 Toolholder

I remixed the tool holder from SixtyFourWarrior to fit my needs. This version is a little bit less wide and in addition I added space for my tweezers and a side cutter. The X-Tool can be hung next to the scraper as well. To be able to…

Downloads
383
Likes
91
Rating
4.69
P
Printablesschm1m

KitchenAid Toolholder

A fairly simple Toolholder for the standart 3 Tools/Attachments for the KitchenAid stand mixers. even though i tried to design it to be as printable as possible, there are 3 little spots that need a bit of support. other than that it…

Downloads
378
Likes
52
Rating
5
P
PrintablesBisti

Sovol sv06 toolholder

This is a remix of another model, but that model did not fit my unit, so i changed the attachment point to fit mine. its a tight fit onto the printer but you should be able to get it on if you set the bottom notch first and then lift the…

Downloads
361
Likes
76
Rating
4
P
PrintablesSweden3dp

The best ender 3 v3 se Toolholder

This model is made to hold every single tool and item you got with the purchase of your ender 3 v3 se, but since most of us also expand our toolkits elsewhere, I wanted to make this toolholder customizable and versatile. There are premade…

Downloads
345
Likes
97
Rating
5
P
PrintablesPetclaud

Prusa MK3 Toolholder

Just my version of a simple tool holder, that fits the MK3. It can hold most tools as provided with the Prusa i3 MK3 kit and some more like a spatula and two pliers

Downloads
317
Likes
35
Rating
5
P
Printablesclmnsr

Toolholder for Sovol SV06 (Clamp optimized)

I designed a tool holder for the Sovol SV06. This mounts on the right side of the printer with the two supports glued to the tool holder. EDIT - 18.12.2022: Smaller supports fit into the holder. EDIT - 15.01.2023: Improved feeds for the…

Downloads
308
Likes
33
Rating
2.5
P
PrintablesGamingFaxe

Toolholder for Thermomix TM6 - 2 Parts no Support

Thermomix TM6 Holder - Remix - Original Creator: <Click> Cut in 2 Parts and now screwable with 2 M3x20mm Features: -No Supports needed -Stronger than the Original One because right Print Direction -2h Print on a Bambu Lab X1C instead of…

Downloads
304
Likes
40
Rating
3.5
P
PrintablesFF3Designs

Toolholder for Flashforge Adventurer 5m Pro

None of the available versions satisfied me, so I designed my own toolholder. Has space for all the included tools (2 nozzle assemblies, the side cutter, the alan keys, the screwdriver and the nozzle unclogger), a cheap deburring tool…

Downloads
273
Likes
27
Rating
3.5
P
PrintablesSaltyPkay

Skadis toolholder

designed for 500g hammer useable deep 28mm distance between hooks 33mm You need to use the mountingplate “4 Hooks.3mf” or “3 Hooks.3mf” from original model

Downloads
249
Likes
65
Rating
0
P
PrintablesProjunk

Parametric Multifix type A Toolholders

Parametric Multifix type A Toolholders: Standard tool holder: MultifixA_Holder.stl V groove tool holder: MultifixA_VHolder.stl Dial Indicator holder: MultifixA_DialIndicatorHolder.stl Concentricity Pusher Holder:…

Downloads
238
Likes
19
Rating
5
P
PrintablesMartin Brown

Metal lathe / mill Morse taper 3 toolholder

Printed in petg at 0.2 mm layer height, two parts are held together using m4*16 bolts and M4 nuts, the base is attached to the wall board using suitable M3 screws. Nuts are inserted in the wall bracket at 8.8mm using a filament colour…

Downloads
196
Likes
28
Rating
0
P
PrintablesSimon

Toolholder for Ikea Platsa and others

Just another toolholder. I designed it for my Platsa enclosure and its possible to use without screws. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0,3 Infill: 10% Filament: Prusa PETG PETG…

Downloads
189
Likes
33
Rating
4.75
P
Printableskerog777

Prusa XL ToolHolder Improved

This holds pretty much everything that came with the Prusa XL. Included the scad file that remixes it. To run the scad (and make your own mods) you will need the original STL and the tweezer bracket pressfit STL, so I included the latter.

Downloads
182
Likes
20
Rating
4.67
P
PrintablesMD3D

Kärcher toolholder

0.3 layer height Only a little part need support if wall side is on printbed.( best postion for nice fillets ) 20% infill 60 - 80mm/s printspeed.

Downloads
171
Likes
21
Rating
0
P
PrintablesRune

Gravity toolholder for multiboard/multiconnect

If you want a single part to hold all your different screwdrivers, this is for you! This part can hold screwdrivers with a diameter from 1mm up to 8mm or more. It also works for files. To put your tool onto the wall, just use your tool to…

Downloads
158
Likes
51
Rating
0
P
Printablesmarkarndt

Pen / Toolholder for IKEA Skadis pegboard

Additional part for the IKEA Skadis pegboard, the neccessary brackets you can find here: https://www.printables.com/model/607371-brackets-and-trays-for-skadis-plate You need to print 2 x “mount hook span 3 holes” from the base design.

Downloads
154
Likes
30
Rating
0
P
PrintablesLeDomme

Proxxon Pengrinder PS13 Toolholder

Black Tools are original, transparent are printed with resin by me (you'll find the tools in my profile) Printed and tested in ABS (Nobufil ABSx Galaxy Blue), so your mileage may vary. I added a test piece with a single holder for you to…

Downloads
150
Likes
13
Rating
0
P
Printables3D_Goblin

Multifix toolholder size A

Holder for multifix size A holders of a Latche Mount on the wall and slide the multifix over it. PET-G ore PLA works great

Downloads
147
Likes
8
Rating
0
P
PrintablesMatthew Harless

Toolholder for Yihua 8786D Soldering Station

A tip and nozzle holder for Yihua 8786D Soldering Station with mounting holes for adding accessories. The holes are for 4mm screws and are on 10mm centers. It holds 10 tips and 4 nozzles.

Downloads
147
Likes
42
Rating
5
P
PrintablesHeng

BOSCH GWS 12V-76 Halter / Toolholder

Basierend auf der Idee von « michisbarbq“ (https://www.thingiverse.com/thing:3971430) habe ich diesen Werkzeughalter so konstruiert, dass er der Maschine besseren Halt bietet. Die Löcher sind für 3,5mm Schrauben vorgesehen. Durch die…

Downloads
147
Likes
16
Rating
4.5
P
PrintablesSteve

Bondtech INDX Toolholder Magnet Tool

Simple tool to assist with consistently installing the 3x8mm magnets into the INDX toolholders. Requires: M3x8 SHCS x2 Thread the M3x8 SHCS into the top half of the tool. Make sure the 3x8mm magnets are oriented correctly (use an INDX…

Downloads
144
Likes
41
Rating
5
P
PrintablesMr_Tuner

Parkside Hex Wrenches Toolholder

Toolholder for Toolholder for Parkside Hex Wrenches. You can choose the color of the letters in prusaslicer. This is made from PLA and seems to be tough enough.

Downloads
141
Likes
21
Rating
0
P
PrintablesKristian

Picks and hook toolholder for ikea skadis pegboard

Small holder for square handle picks with dimensions of 13.3 x 13.3mm at the handle. Requires supports at mounting hooks

Downloads
135
Likes
21
Rating
5
P
PrintablesMike Renner

Bambulab A1 Mini Toolholder

Bambulab A1 Mini Toolholder v2

Downloads
132
Likes
33
Rating
5
P
PrintablesMr_Tuner

Parkside Torx Wrenches Toolholder

Toolholder for Toolholder for Parkside Torx Wrenches. You can choose the color of the letters in prusaslicer. This is made from PLA and seems to be tough enough.

Downloads
130
Likes
16
Rating
0
P
PrintablesMadestCat

Gridfinity Toolholder for the Prusa Xl Tools

This is a simple tool holder, compatible to the gridfinity system. It's easy to print, nothing special here.

Downloads
126
Likes
24
Rating
5
P
PrintablesErik Lachnit

Ender 3 S1 Display Toolholder

Its a simple Toolholder for your Display. I used ESun PLA+ with a Layerhight of 0,2mm and a 5% Infill New Upgraded Version with clips on the bottom

Downloads
126
Likes
31
Rating
5
P
PrintablesMartin R

Flashforge Adventurer 5M Pro - Toolholder

Flashforge Adventurer 5M Pro – Toolholder This print in place toolholder allows you to store your standard tools neatly on the side of your Flashforge Adventurer 5M Pro. No glue is needed: everything just clicks together permanently. Fits…

Downloads
124
Likes
21
Rating
0
P
PrintablesSabre Design

TTS ER20 Toolholder Wall Mount

Nice storage system for TTS toolholders. One mount can fit 5 holders, included enough mounts to fit 25 holders total.

Downloads
115
Likes
20
Rating
0
P
PrintablesAPant1

Prusa Xl Toolholder

I remixed this toolholder to fit the tools I use with my XL, with spots for: All six hex wrenches that come with the XL Both universal wrenches Tweezers Glue stick Lubricant Spare nozzles Metal scraper from an Ender 3

Downloads
113
Likes
28
Rating
0
P
PrintablesMP makes

Linkable Toolholders - Festool MFT Compatible

This is V2 of the “linkable tool holders” that I have published previously. The updated version will attach to the Festool MFT-3 using a remixed shorter version of the Festool MFT-3 nut in the same principle as the original Festool…

Downloads
112
Likes
37
Rating
4
P
PrintablesJudi62

Toolholder CNC mill

All you need tool holder for a small mill like 3018

Downloads
111
Likes
21
Rating
0
P
Printableswerz 99

Lathe Toolholder

Toolholder for Multifix AS for HBM 25 x 550 Lathe. Clips on the Splash Guard of ther Lathe

Downloads
109
Likes
18
Rating
0
P
Printablessamuel-t

[ REMIX ] Original Prusa Enclosure toolholder (LED stripe compatible, mirrored)

I have a sheet holder on the right side and the LED stripe installed. Thus, created this remix which mounts on an additional vertical screw and is mirrored for left use. This remix is inspired by the LED stripe solution provided in this…

Downloads
104
Likes
27
Rating
5
P
PrintablesFrido

MUM4/MUM5 Toolholder

Print with the front flat side down. There are indentations on the back to fix the toolholder using double sided foam tape. Mit der flachen Vorderseite nach Unten drucken. Auf der Rückseite sind Aussparungen um den Werkzeughalter mit…

Downloads
103
Likes
26
Rating
5
P
PrintablesCrowdedlight

Enclosure toolholder for custom tools with step and inventor file

A remix of the original tool holder for the Prusa enclosure that contains the tools I wanted. Made to fit on the top left side of the enclosure using square M3 nuts. The step and inventor file is shared here, so it's hopefully easier for…

Downloads
101
Likes
7
Rating
5
P
PrintablesJaime

iFixit toolholder with gridfinity

I have an iFixit tool set that I got on Amazon a few years back. I wanted a pretty place to display/store the tools and it had to be Gridfinity-compatible so I made this. I printed it with my MK4 using some generic PLA, 10% infill, gyroid…

Downloads
101
Likes
17
Rating
5
P
PrintablesLiberty4Ever

Elegoo Phecda Laser Toolholder

This is a simple organizer and toolholder for the tools and accessories that ship with an Elegoo Phecda laser engraver. Two screws are needed to mount the toolholder. There is a place for the screwdriver, three hex keys, wrench, micro SD…

Downloads
99
Likes
17
Rating
0
P
PrintablesJohination

IKEA Lack Toolholder - Ender 3

Nozzle: 0.4mm Resolution: 0.16 - 0.28

Downloads
96
Likes
33
Rating
5
P
Printablesbillwurles

Elegoo Centauri Carbon Toolholder

This toolholder holds all the tools that come with the Centauri Carbon, and a lot more. Has space for a full standard set off allen keys, screwdrivers, the elegoo scraper, a creality scraper, a leatherman multitool, usb stick, calipers, a…

Downloads
95
Likes
15
Rating
0
P
Printablesflo_underscore

Gridfinity AXA Lathe Toolholder 1x3x4

This model lets you store a AXA lathe toolholder in a 1x3x4U GridFinity box. The toolholder is modeled after a Shars 250-101, so I can't guarantee that other brands fit as well. There is just enough room for your average indexable tool.…

Downloads
94
Likes
19
Rating
0
P
PrintablesEsZett

Honeycomb Toolholder SV08

UPDATE: I added a v2 for better fit and less support print. Toolholder for my Enclosure Remix https://www.printables.com/de/model/971505-sovol-sv08-enclousure-with-honeycomb-storage-wall Use auto tree support

Downloads
93
Likes
19
Rating
0
P
PrintablesKm4T

Aquascaping Toolholder

Aquascaping Tool Holder (Cabinet-Mounted) Keep your aquascaping tools organized and easily accessible with this cabinet-mounted tool holder. Large Tool Holder : 27,5 cm long - Made for 6 Tools like scissors and tweezers plus hardscape…

Downloads
83
Likes
10
Rating
0
P
PrintablesSurfalex2000

Prusa XL series: Ultimate Hotend Holder (update: x16 Version with added Toolholders)

I dont like to change only the nozzle on the XL (i love it on the Revo) , so i prefer to change the whole hotend. So ive ordered a bunch of different nozzle sizes with the rest ob the Hotend. I also ordered some colored silikon socks to…

Downloads
82
Likes
22
Rating
5
P
PrintablesAH - X1C

Prusa MK3S Toolholder

I wanted a small tool holder for my Prusa i3 MK3 S+ frame. My aims were simple: Holds the tools and things I use in most prints Clips onto the frame Does not interfere with the movement of the print head Does not sit on top of the power…

Downloads
79
Likes
21
Rating
4.67
P
PrintablesNorfae3D

Wera toolholder

Made a wallmounted toolholder for the Wera Kraftform kompakt VDE big pack 1 set for one of our sideshops at work. Printed on a Creality CR-M4 in grey PLA. Walls: 5 Infill: 15% Infill pattern: Gyroid I printed it with supports for the…

Downloads
77
Likes
10
Rating
5
P
PrintablesDaniel Hoda

Toolholder for creality ender3 v3 se with side scraper holder.

Toolholder for creality ender3 v3 se with side scraper holder.

Downloads
74
Likes
12
Rating
5
P
PrintablesThael

T 12 Soldering Station Rack [modular] with Spool- and Toolholder

The first version of the station works for me. A friend of mine bought the same station on Ali and had some extra wishes. So a few more versions were created The last version is printable without any support but you have to apply a decent…

Downloads
69
Likes
27
Rating
0
P
PrintablesLepa_Tech

Ender 3 toolholder

This is a toolholder for the ender 3

Downloads
68
Likes
27
Rating
0
P
PrintablesAndreDesigns

Toolholder for most Pliers

This is a small toolholder, that uses one M4 Wood screw with up to 7mm head diameter.

Downloads
67
Likes
7
Rating
5
P
PrintablesBernd

Prusa XL - Side box with variable Toolholder / Seitenbehälter mit variablen Werkzeughalter 80x140x25mm/80x120x25mm

Remix of the side boxes with different sizes (120 mm and 140 mm length) for 2.6 kg spools. There are various tool holders that can be placed freely and positioned variably. Remix aus den Seitenboxen mit unterschiedlicher Größe(120mm und…

Downloads
65
Likes
7
Rating
4
P
PrintablesLaurent Taz

Flsun V400 Toolholder

Toolholder for v400

Downloads
61
Likes
10
Rating
0
P
Printableslufa

Gewinde-Werkzeughalter M2 - M4 Toolholder for M2 - M4

Werkzeughalter für feine Gewindeschneidarbeiten von M2 bis M4 wo man mit dem Windeisen nicht mehr ran kommt.

Downloads
61
Likes
15
Rating
4.5

Toolholder for Einhell

Works with: Reciprocating saw TE-AP 18Li and similar Jigsaw TC-JS 18Li and similar Multitool Varrito and similar Angle grinder TC-AG 18/115Li and similar Concrete hammer TE-HD 18Li and similar Suggestions for improvement are welcome

Downloads
60
Likes
4
Rating
0
P
PrintablesGray Seas

Toolholder Storage Tray

Trays for storing ISO30 ER 32 machine tool holder.

Downloads
60
Likes
10
Rating
0
P
Printablesnicedevil

Toolholder for Ratrig Enclosure 2 (Splitpanels 400mm)

This toolholder can hold up to 4 screwdrivers (I got these: Princore Shop ), 1 brush, 2 tweezers and 1 pliers (I got this: Knipex ) and is mounted to the side panel screws. Feel free to remix it for your own tools :)

Downloads
60
Likes
12
Rating
0
P
PrintablesMartin GW

Split up Toolholder for Cyberdynes U1 Topcover

The original Toolholder requires quite a bit of support to print, and it leaves a rough suface on some larger areas. Since the part doesn't see too heavy loads the print orientation shouldnt matter that much. Print the two parts and…

Downloads
58
Likes
15
Rating
5
P
PrintablesDJ Boom

Bambu P1P/P1S Toolholder

To save myself from actually measuring the dimensions of the P1 mystery hole, I leveraged just joo' s design. I wanted to hold some specific tools, and I wanted to add some bracing to reduce the deflection of the tool-holdy part. I used…

Downloads
58
Likes
19
Rating
0
P
PrintablesJames Mayor

Universal round toolholder for IKEA Skadis (SUMS)

With this universal tool holder you can store three tools next to each other. It's build for leathercraft tools. The tools have different diameter stems, but with the different sized tubes you can store them next to each other. The base…

Downloads
57
Likes
6
Rating
0
P
PrintablesArangoDS

TOOLHOLDER / tool holder for Anycubic KOBRA 3

TOOL HOLDER KOBRA 3 nozzle 4mm

Downloads
57
Likes
10
Rating
0
P
PrintablesAryser

Holder for Prusa Enclosure for waste bin or toolholder

to fix on bottom profile (left or right) by screw. you need: M3x8 screw (1) M3nS nut (1) The toolholder bottom is neutral (same for left and right) and can be used for different elements, like the toolholder and the waste bin. The printed…

Downloads
55
Likes
11
Rating
5
P

Toolholder for dentaldrills and accesories

I created a little toolholder for my drills and couple other stuff I need for work. It's suitable for drills with a diameter of 2.5mm, grinding wheels with a diameter of 39mm and 22mm, rubber wheels with a diameter of 21mm, rubber rods…

Downloads
55
Likes
10
Rating
0
P
Printablesmaxbill

Kobra X toolholder

There is a small slot where this holder attaches to. Added a fusion file to change it for more/different tools. esun concrete grey is a good fit for the machines color.

Downloads
52
Likes
11
Rating
5
P
PrintablesFokieH

Werkzeughalter / Toolholder Skadis & Honeycomb

Update V3 - 20251231 - Weitere Version mit Löchern Ø13mm anstatt Ø11mm hinzugefügt, dies passt besser für die meisten Zangen / Add seperate Version with Ø13mm holes instead of Ø11mm, this fits better for most pliers…

Downloads
51
Likes
14
Rating
0
P
PrintablesBunsenbrenner14

Magnetic Toolholder for Prusa Mini

Magnetic toolholder for the Prusa Mini tools. I also shared the step file for changing the size of the magnets. To mount it to the aluminum extrusion, you need two nonut 2 mm clamps from the following page:…

Downloads
50
Likes
32
Rating
5
P
PrintablesAiMoR

Platsa Toolholder

Supports: Yes Resolution: 0.2 Infill: 10%

Downloads
50
Likes
4
Rating
0
P
Printablesben-s

250-000 / MXA toolholder storage bracket

Simple wall mounting bracket for storing Chinese 250-000 series lathe toolholders (such as https://www.arceurotrade.co.uk/Catalogue/Machines-Accessories/Lathe-Accessories/Tool-Posts/Model-000-Quick-Change-Tool-Post-Set ) I believe these…

Downloads
49
Likes
4
Rating
5
P
PrintablesBlade46

Tooltags SK50 toolholder

Tooltags SK50 toolholder, for every standard SK50 toolholder, for when you need to print out a label with lenght/width, or just write down the toolnumber/etc. Made for labels from a dymo label printer. Easy/quick print, i've used PETG…

Downloads
48
Likes
2
Rating
5
P
PrintablesMartin

Multiboard Toolholder for cordless Ferrex (Aldi) oscillating Multitool

Printed at 0.2mm layer, 3 walls (like al multiboard parts), 15% infill (PETG). original design is from: https://www.printables.com/@tlisek_2060345

Downloads
48
Likes
5
Rating
0
P
PrintablesBummer Bummer

Quick-change toolholder, AXA QCTP 250-111 250-101 for WM210.

Размеры посадочного места на картинках. Печатал АБС пластиком, заполнение 15 процентов. Можно печатать и другим пластиком, усадки будет меньше, просто садится будет плотнее Быстросменный резцедержатель, AXA QCTP 250-111 250-101 for WM210.…

Downloads
46
Likes
8
Rating
0
P
Printablesvtcnc

AXA Toolholder Rail Slide

I used this simple sliding clip for storing AXA toolholders behind my lathe. The holders slide along 1" (25mm) aluminum extrusions. This was my first print after building my Prusa. I printed them in draft mode, 15% infill and raised the…

Downloads
46
Likes
7
Rating
0
P
PrintablesBlade46

Tooltag SK40 toolholder

Tooltags SK40 toolholder, for every standard SK40 toolholder, for when you need to print out a label with lenght/width, or just write down your toolnumber. Used PETG because the PLA i used before disolved in the coolant.

Downloads
43
Likes
1
Rating
0
P
PrintablesImitheo

Ender 3 V3 SE Bolted Toolholder

Toolholders designed to bolt tools in a metal 40x40mm frame and allow clearance for a frontal door.

Downloads
43
Likes
10
Rating
0
P

Prusa MK4S Toolholder

I liked the design by @AHPrusai3MK3SKit but sadly discovered that it doesn't fit the MK4S frame, so after a very quick tweak in Tinkercad we get this. Print settings:- PLA 0.2mm Generated support material with auto generated supports…

Downloads
42
Likes
10
Rating
4
P
Printablestheo

Prusa Mini Toolholder

I wanted a bit bigger of a toolholder as well as a small spool for tape rolls and a different compartment set up.

Downloads
42
Likes
6
Rating
0
P
Printablesznerk

Scraper for Original Prusa Enclosure Toolholder

Scraper for Original Prusa Enclosure Toolholder (but feel free to use it without the toolholder ;-) ). This scraper fits into the scraper opening of this toolholder:…

Downloads
42
Likes
8
Rating
5
P
PrintablesS3BR4

PRUSA MK4 - LCD Toolholder

As I saw the other mods to fill the gap between the LCD screen and the frame of the MK4 I thought this might be a great place to store my tweezers as they are my most used tool. The space is exactly the right size and just needed some…

Downloads
41
Likes
9
Rating
5
P
PrintablesImitheo

K1 MAX Honeycomb Toolholder

Toolholder designed to improve the workflow on my newly acquired K1 MAX, the “right” version is meant to be installed on the right side of the machine and so on. The installation requires a double sided tape as the part is developed…

Downloads
41
Likes
6
Rating
0
P
PrintablesRolf Ahlers

Lathe Toolholder set

I designed some toolholders to clean up the mess on the lathe gearbox and give some room for drawings and measuring tools. this is for type A toolholders. Printed in CF Nylon, never tested in other materials. Print Settings Printer:…

Downloads
41
Likes
8
Rating
0

ToolHolder - Voxelab Aquila

Tool holder for standard tools that come with Voxe lab Aquila. 5x Allen key 2x Screwdriver 1x Scrape 2x Spanners 1x Sponge with nozzle needle Also holds 1x cutters 1x glue stick 1x needle tube Suggest slicing main holder with top on…

Downloads
38
Likes
5
Rating
0
P
PrintablesBruno Germany

Universal flexible toolholder (clamp) for "Tool Storage System - Brunos"

This holder is designed for different tools. The strong base is made of PETG the flexible part of TPU. It is an accesory for "Brunos - Tool Storage System)- It fits with his holders (base part) easyly in the wallmounted modules. You will…

Downloads
37
Likes
5
Rating
0