6,180 models
IMPORTANT: This is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 2/3 controllers. If you are looking for the Quest 1 version, see here . NOTE2: This will fit a Quest 3 controller, but it may be slightly…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
An controller stand for Xbox one/series x/s and PS5 controllers. The stand is based on a stormtrooper from starwars
Print approx. €4.13–€5.05 excl. taxPreliminary estimate for one variant
This is a simple wall mount for a PS5 official controller and headphones. Just print everything out of PETG (I used Prusament PETG) and glue it together with superglue. To fix it on a wall, use Mamut Glue or similar one-component glue.…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
I needed a toy for my son for when I'm playing on my PS5 so he can “join”, without endangering my real controllers, so I designed this easily printable little controller toy. Just look at this happy customer: Attention and disclaimer: If…
Print approx. €4.64–€5.67 excl. taxPreliminary estimate for one variant
This is made for the Gulikit KingKong 2 Pro controller. I have not tested it with their other models, but it might work with them too. Main Features Pass-throughs for the back buttons (turn off, switch modes, pair) A hole for the charging…
Print approx. €2.95–€3.60 excl. taxPreliminary estimate for PETGSource material: PET
Stand for two Xbox One controllers with logo.
Print approx. €7.81–€9.55 excl. taxPreliminary estimate for one variant
This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
Support for remote play with your phone directly on the controller. Fits phones from 71mm to 105mm in width. The tightening screws use an M7*1.0 thread I suggest you glue some rubber (in my case pieces of the rubber band) so that the…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
DualShock 4 (PlayStation 4 Controller) Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. Thanks to Andreas on GrabCAD for…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Thumbstick replacement Probably will work with other XBOX pads too I recommend to: use 0.25mm nozzle (to better reproduce the texture) or print with resin Update: additional champfered version requested by @ntnt
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
HackMan3D Control Deck — Build Your Own Programmable Macro Controller I am proud to introduce the HackMan3D Control Deck, or HCD: a fully customizable macro controller designed for 3D printing and compatible with both Windows and macOS.…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Hello friends, This is a 3d print for everyone getting in to the fpv hobby on a budget if you have the ps5 controller ofc. it prints very fast and makes your accuracy a million times better. i suggest printing it at 19.5 mm for x/y
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Stadia Controller Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. A huge thanks also to Coopey for its contour sketch of the…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have a Playstation 4, PS4 controller stand for you. The controller fits beautifully into it and is an ornament to any collection of games and video games. The material I…
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant
My own design for a Meshtastic/Meshcore Heltec V3 walkie-textie that also holds a power switch, 18650 Li-Ion cell, & TP4056 charge controller. As a bonus, everything is held together by a single M3x10 pan head screw. Bluetooth/Wifi For…
Print approx. €3.11–€3.81 excl. taxPreliminary estimate for one variant
Introducing the Wire Lock Block for Xbox One S controllers. A simple 3D printed battery pack and cover that prevents the USB cable from being accidentally disconnected mid-game. Optionally the battery pack has a screw hole so that it can…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Akai Professional Fire Stand (a snap on stand for the FL Studio hardware controller by Akai). Connect one side of the stand (Front or rear) to the Fire and then lightly pull and snap the opposite side into place. Originally printed using…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the other model, incorporating splined inserts and matching splined halves to allow for 45 degree incremental rotation. No threads, assemble with #10-24x2.25" socket cap screw and nut. Version 2: Has deeper socket cap…
Print approx. €4.63–€5.66 excl. taxPreliminary estimate for one variant
wall mount for quest 3 controller
Print approx. €4.62–€5.64 excl. taxPreliminary estimate for one variant
SNES controllers are inherently stackable, so this holder takes that feature to the logical conclusion and makes it possible to store the controllers neatly as a single stack.
Print approx. €3.40–€4.15 excl. taxPreliminary estimate for one variant
Please click if you appreciate my work :) A holder designed specifically for mounting on the Qube 540 PC case, allowing you to conveniently keep your gamepad within easy reach. 🔩 Design The model consists of two parts that fit together –…
Print approx. €3.80–€4.65 excl. taxPreliminary estimate for one variant
Es gibt eine neue Variante für den Betrieb mit einer UBS C Powerbank. Ihr benötigt nur eine zusätzliche Platine für ca. 3 Euro und ein neues Gehäuse:…
Print approx. €4.23–€5.16 excl. taxPreliminary estimate for PETGSource material: PET
Double PowerA Nintendo Switch controller stand
Print approx. €3.18–€3.88 excl. taxPreliminary estimate for one variant
There is a large list of radiator fan mounting models Alvomane's Radiator Booster UppsalaHenrik's 2x92mm fan ducts for radiator djtifosi' Radiator Blower Fan with magnetic holder simlrh's Radiator Fan schranzistor's Radiator amplifier…
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for one variant
Makes it so your controller can accept 18500's (like the 18650 but shorter) so it will fit into an Xbox One controller. Use a little bit of aluminum foil to bridge between the spot where the other battery is supposed to be.
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
A stand for the easysmx x20 controller and its receiver. Basically like the original . I just added a cutout in the back of the stand to safely store the receiver of the controller, when not in use. I printed mine on a CoreOne. The sides…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
After remixing the pro controller holder for the first time with a Zelda - Tears of the Kingdom look (find this one here: https://www.printables.com/de/model/826335-nintendo-switch-pro-controller-stand-zelda-totk-re) I decided to do some…
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
I will present this as a Sewing Machine “Game” Controller Aid, :) as a contest entry. The reason for calling it a game controller is because when I was a kid there where no Electronic games. My grandmother came up with an idea to…
Print approx. €4.03–€4.92 excl. taxPreliminary estimate for one variant
Small remix of a nice model for a PWM motor controller. The capacitator is a littlebit bigger for the case so I edited it a bit. Print settings Nothing special, I printed with 0,2 mm layer hight, should be fine with 0, 35 mm. Printed with…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Waterproof wall mount for a specific PWM Solar Charger Controller. The waterproofing is achieved by adding a cover that goes in front and behind the controller, with an angle for the water to slide on top of the cover This design might…
Print approx. €4.01–€4.90 excl. taxPreliminary estimate for one variant
Kombinace s logem
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for PETGSource material: PET
With these extensions, you are able to use the switch controllers in PC FPV/drone simulators (like LiftOff). This increases the precision of the movements. In addition, a small part named shifter rises the right hand side controller to…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
I really liked madmac10's Mr. BulletFeeder controller mount for the XL750 (assume it would work fine with the XL650), and printed it for my XL750. I also have a RL1100, and the casefeeder support pole is square-ish, 25.99mm x 25.62mm, so…
Print approx. €2.94–€3.60 excl. taxPreliminary estimate for one variant
When our little one had trouble sleeping, the gentle rocking motion in the stroller always helped. Annoying was only that he was always awake when the road was too perfect. With my rocking support you have reliable light rocking motion at…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
“When using a wireless battery pack, you can plug this into the USB C port on the controller to block the bright LED light when playing in the dark. On my controller, I still get a very dim halo showing under the controller's plastic so I…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
A protective case with a cable clamp for a XH-M604 Lithium battery charge controller. Note this a new design and I will not be able to print this for a few weeks but if some one wants to have ago please feed back if all dimensions are OK.…
Print approx. €4.56–€5.57 excl. taxPreliminary estimate for PETGSource material: PET
Kresleno v PTC
Print approx. €3.85–€4.70 excl. taxPreliminary estimate for one variant
This bracket is specifically designed to allow the user to mount a MiniFuse audio controller under their desk. It requires 2x 2x10mm self tapping screws to mount into the desk if the desk is solid wood. You will likely need something…
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
Brzda kočárku Britax Römer GO NEXT / Brake pad for the stroller Britax Römer GO NEXT Nejlepší tisk s filamentem TPU 95A 1 kg Black / Best print with TPU 95A 1 kg Black filament
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
The TC420 and TC421 are very nice and relatively cheap LED controllers for fish tank / aquarium lights. However, there is no cover at the connections, so I created a two-piece cover. The lower part will be screwed in permanently. The…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
Clip/Knob for the Leg adjustment for Hartan Sprint Babystroller. This part is already tested and fits perfect. The left part on the images is the printed one and the right is the original one. Minimal supports required for the Clip…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
Check out the Alpakka controller, its a really nice project, and it works like charm, since I built mine, this is the only controller I am using for PC gaming. I made the joystick cap out of TPU and gave it a fuzzy skin in the slicer…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Experimenting with using a PS5 Dualsense controller as a steeringwheel for driving-games. Model uses my snapon mount for the controller, you might need to add something between controller and mount to add extra friction so that the…
Print approx. €7.31–€8.93 excl. taxPreliminary estimate for PETGSource material: PET
DE: Controller-Haken für das Schwerlastregal. kompatibel mit sämtlichen Game Controllern EN: Controller-hook for Heavy duty shelf compatible with all game controllers https://www.floordirekt.de/kellerregal-grizzly-von-floordirekt-grau.html
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
This LED controller can power up to 90 LEDs, powered by USB and with a current of up to 2 A. I use 45 LEDs. I already had this controller at home and wanted to use it. It shines great and looks very decent on the original Prusa Enclosure.…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for PETGSource material: PET
If you use modern LED ring lights on a microscope there is the control unit. With this base plate you can mount the photonic LED controller on a Zeiss Microscope with cable ties. The connectors on the backside are supported too and also…
Print approx. €4.10–€5.02 excl. taxPreliminary estimate for one variant
Drehknopf für Hercules Pult in weihnachtlichen Stil. Knob for hercules controller (x-mas look)
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Diese neue Version 2026 habe ich im Laufe der letzten Jahre weiter verfeinert und optimiert. Hier stelle ich nun euch die neuste Version vor, um einen besseren Gebrauch zu erreichen. Die Prusament 2 kg Welle kann auch für breitere…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for PETGSource material: PET
materiál ASA,ABS,PETG, PA……dle libosti :-) 3 perimetry , 25% výplň po vytisknutí je model lehce smrsknutý, zaleží na zvolení materiálu, ( můj případ z ASA )při nasazování na hřídel jsem použil horkovzdušnou pistol, Nahrál jsem model a…
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant
An MQTT-based, Home Assistant integrated GPIO control system for controlling legos. The Brickmaster RC supports one or two relays for 9v output, good for driving Lego motors or using as a replacement for a battery box. Can be used with my…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
My very first 3d model (version 1.8), definitely not perfect, but it seems it works fine. The corners of the base supporting the axle are beveled for safety reasons. // Můj první 3d model (verze 1.8), určitě není dokonalý ale zdá se že je…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip rubber pads (optional) Commercial license Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial license…
Hi everyone, the Controller is designed to be printed standing up without supports. There is a bit of postprocessing required to remove the custom supports for the Trigger button flexure. Enjoy printing
Stand for your Xbox controllers. Available with and without the Xbox logo. MMU2S version has the logo embedded in the STL. Use the split to parts button in PrusaSlicer to separate or load the 3MF file. Can be printed in the orientation…
The best Xbox controller stand is minimal and nearly invisible — keeping the focus on your controller, not the stand (🇦🇷 Designed in Argentina by @impuestito_org ) – THIS IS THE ORIGINAL DESIGN ✅ Minimal design. No supports needed. Weighs…
Xbox Stealth Controller Stand that displays your controller as if they are floating on your desk. The stand is sturdy and tries to stay hidden behind the controller itself. Printed with tree supports, brim, and 20% infill on an Ender 3 in…
I've tested this design with PS5 controllers, but it should work with many different controllers. If your console controllers fit, please let me know what you have so that I may update the model listing. 😃 This model prints on its side…
Simple scan of a ps5 controller I took so I could model some stuff. Thought others might find it useful.
PS5 Stealth Controller Stand that displays your controller as if they are floating on your desk. The stand is sturdy and tries to stay hidden behind the controller itself. Printed with tree supports, brim, and 20% infill on an Ender 3 in…
*The file was exported in inches. If it shows up tiny in your slicer, scale it up 25.4x I bought two used xbox controllers that didn't have the battery covers on them, and none of the designs I found online fit very well, so I went ahead…
Designed for Xbox Series X and S Controllers. I think it's compatible other Xbox controllers except those that use a battery pack. Note: The Xbox logo may require sanding to get it in place. Or you can paint the logo hole.
Inspired by agepbiz's Xbox Minimalist Controller Stand(https://www.printables.com/model/449970-minimalistic-xbox-controller-stand), and not being able to find one for the PS5, I decided to learn some new skills and create my own. I have…
Stable stand for Microsoft Xbox One/Series controller.
I remixed agepbiz’s XBOX Controller Stand because it was amazing, while respecting the design to make it suitable for a Nintendo Switch Pro Controller. The remix source is here.…
I redesigned the v2 version to be more rounded and sleek. Product Introduction: Hello everyone! I'm excited to share with you my 3D printed stand design for the PS5 controller. This stand is perfect for storing and displaying your PS5…
Rack and pinion steering for your xbox controller. 100 degrees of rotation. Enjoy finer control in racing games. Get the remastered version: https://www.printables.com/model/271330-xbox-one-mini-wheel-evolution What you need: 608 bearing,…
A 3D stand divided into two parts: the base and the tower. Specifically designed for controllers and headphones, the tower features arms with adjustable angles at 45, 66, and 90 degrees. This allows you to customize the stand for placing…
PS5 Dualsense Controller Stand
Rack and pinion steering for your PS5 controller. 100 degrees of rotation. Get finer control in racing games. What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have laying…
Nice stand for game controllers. This stand is suited for xbox one and series x/s and ps5 controllers. It is inspired on Darth Vader from starwars. If you don't own a 3d printer or just want to buy it. You can buy it on my shop ←
Simple, easy and quick to print (around a hour) mount. Not a perfect design, might revisit later but works fine. Print instructions Category: Organization Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Resolution: 0.2…
Rack and pinion steering for your xbox series X [S] controller. 100 degrees of rotation. Enjoy finer control in racing games. What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you…
Super simple model that I made by hacking together two other models from Thingiverse namely this PS5 controller stand and this Skadis hook . Aside from bodging the two together in Tinkercad I flattened the sides so that the model can…
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Remix of my Xbox One controller holder for use with IKEA Skadis pegboard with an…
Original version was to big for my phone. Additionally I'm using case with “ring” so it was to thick so I created two new versions for anyone with small phone, and phone with thick case. Xbox Series One Controller Phone Mount Narrow - for…
Thing files for Browns PlayStation Xbox Switch Controller Stand by brown1985 - Thingiverse
New version here: https://www.printables.com/model/1840378-ps5-dualsense-controller-phone-mount-bigger-strong This a remix of https://www.printables.com/model/148212-dualsense-simple-phonemount I wanted to be adjustable according to the…
TEST FIT TEST FIT TEST FIT Head here for the full Xbox design PS4 Version Available Here PS5 Version Available Here Switch Version Available Here Print and test controller clips to make sure they fit. 4 files provided here: 1: STEP file…
Universal Controller Stand. Smooth, flexible, and perfect for gamers.
We are currently in the final stretch of development for the final version of the Polybar System. If you have purchased a solderless kit or a DIY kit, please download the Beta 2 files located on our Discord server . 3D Printable Music…
This is a remix of DiilanDH's controller holder, but the system won't let me put it in. I improved the fit to the console and the controller so that it doesn't get knocked off so easily. I also have a version with the PS logo Check out my…
You inspired me to Add the Playstation brand. THX @Hazzardness https://www.printables.com/de/@Hazzardness_250785
This model will require some supports between the legs, under the hands, zipper and the head as well. Add plenty of infill to keep it sturdy! I recommend getting the bottom plate for stability, but I have not been able to test this print…
100% inspired by the Switch Pro controller by npiegdon ( https://www.thingiverse.com/thing:3030629 ). Thanks to davec54's 3D scan, I have improved upon the original version of this stand. Now the thing fits like a glove. It's quite a bit…
This is a remix of https://www.printables.com/fr/model/157076-playstation-5-controller-mini-wheel from @pixel2_237985. Presentation The original wheel with two circles was not confortable to me, so I designed a real round wheel to be more…
Stuff you need to buy: -M3x20mm screws (17 count) -M3x20mm nuts (17 count) (Optional but suggested) -Kailh low profile switches (9 count) -USB encoder OR Arduino pro micro OR equivalent usb board that can act as a game controller -USB…
I had a friend ask me to design a small controller stand, and this was my result! The design works great with all the controllers I have personally, including; Xbox One Playstation 4 Playstation 5 Very easy to print on its side, although…
scanned the xbox one controller using my Mole Scanner from 3DMakerPro
An easy FDM printable stand to hold your PS5 controller in the look of a PS5. There are already some models out there but they don't quite hold the controller as snug as I'd like plus the printing or the assembly were often times a…
Playstation 5 Controller-Ständer mit LOGO PS5 THX @holonda_3d ich hoffe er gefällt euch! Bitte liken und folgen Sie für mehr Gamingstuff ---------------------------- Playstation 5 Controller-Ständer mit LOGO PS5 THX @holonda_3d ich hoffe…
NEW VERSION!!: https://www.printables.com/model/803435-new-bearing-less-ps4-controller-mini-wheel Based off of these two models: https://www.thingiverse.com/thing:4498704 https://www.thingiverse.com/thing:3062713 Print screw at 100%…
Controller stand for me to use at my desk. Nice when using mouse and keyboard in VR but need them around.
Designed for TFK Joggster Adventure. The holder prevents the cup from tilting in all directions and also uses printed “springs” to compensate for movements in the vertical direction. Dimensions Inner diameter of the holder is 75 mm. The…
Battery Cover for Xbox Series S/X Controllers clicks in firmly printed in PLA i think this is the first "free" model of a normal battery cover for the xbox series controllers
The Steam Controller needs a dock, this our my take on it. It is extremely close to the version we will release in June, except for three things: It lacks the weight to properly stay in place while removing the controller from the magnet…
TEST FIT TEST FIT TEST FIT Head here for the full PS5 design PS4 Version Available Here Xbox Version Available Here Print and test controller clips to make sure they fit. Two files provided here: 1: STEP file for those who'd like to…
Update V1.01 : - Very tiny cosmetic adjustment, Removed the small rounded side edges on the front face as they didn't quite look right to me. It has not effect on the controler or puck fit and is purely to just make it look that tiny bit…
Witcher wolf controller holder xbox/playstation I recommend organic supports and especially for teeth!
![Xbox series X [S] controller mini wheel](https://media.printables.com/media/prints/157078/images/1468543_a9941f77-2739-4f1c-a938-4d727942ca80/large_display_xs_wheel_fs_start_157078.jpg)
