Support mural JBL Tuner 2
Support mural pour tuner 2 de JBL. Soit poser comme sur une étagère soit fixé avec 2 colliers dans les emplacements prévus.
- Downloads
- 80
- Likes
- 1
- Rating
- 4
164 models
Support mural pour tuner 2 de JBL. Soit poser comme sur une étagère soit fixé avec 2 colliers dans les emplacements prévus.
This is a replacement part for the tentioning part of the popular D'Addario guitar tuner. I Hope to help all you guitarists and bassists out there who have a broken tuner lying around. I did lots of tests with different materials, nozzles…
Concept Overview This is a simple mechanical tuner concept that's based on the resonance of a weighted cantilever element. The geometry is designed such that the tuner generates an audible “buzz” when excited by a specific frequency -…
Peep sight rotation can be very annoying and time consuming to fix. One solution is to twist the bow string to perfectly align peep but it requires to have a bow press. One other, fast and easy solution is to use this little tool, that…
check out the video of these tuners: The purpose of 3D printing guitar tuners is mostly for DIY musical instruments and also someday I will design a guitar that is 100% 3D printed. In addition they can be used as replacement parts on an…
Print 1 each as downloaded for the Left side and 1 ea (mirrored) in your slicer for the right sides. (probably in PETG if you're going to use them outdoors) utilizing the provided hardware that comes with the Yaseu FC-50 Tuner. Don't have…
Relive the excitement of tuner culture with this 3D printable STL model of the BMW M3 E46 (Most Wanted Edition). This iconic tuner car model is perfect for car enthusiasts and Need for Speed fans looking to display a legendary street…
Designed specially for Harley Benton locking tuners but may fit others if the shaft dimensions are the same (3.6x2.4mm). Looks good, but the reason was weight reduction of the headstock, as the guitar was very neck heavy. Less than 1 gram…
check out version 2: https://www.printables.com/model/473276-guitar-tuners-that-actually-work Assebly demo: tested guitar string tuners. they work great for nylon strings, for steel strings, I'd say 80%-90%. they tune nicely, but break…
8/1/2023 - added “s-atu” versions. They are compatible with the original components, the body is shorter (150mm) and the front & rear pieces have embossed legends, “ANT & TX” on the rear by the RF connectors and “T, A, B” (Tune, Auto,…
A₄ is the musical pitch corresponding to an audio frequency of 440 Hz , which serves as a tuning standard for the musical note of A above middle C, or A₄ in scientific pitch notation. It is standardized by the International Organization…
Showcase personalized automotive style with this 3D printable STL model of a Customized Toyota Supra. This tuned sports car model is perfect for automotive enthusiasts and JDM fans looking to display their passion for unique modifications…
Power drill bits for winding guitar and bass tuners. designed with the intention to fit a fender strat and a fender p bass
When pliers really isn't a good solution to loosen or tighten the nut on guitar tuners, jacks, and potentiometer. Files to print 10mm, 12mm, and 14mm nut sizes tools. Slides over the top of the tuner peg or volume / tone potentiometer.…
Dial knob - para pantalla de prusa o similares.
Capture the essence of unique automotive artistry with this striking 3D printable model of an RWB-style Porsche 911, presented in a dramatic reveal, draped in a sleek black cloth. This model is ideal for fans of custom car culture,…
Ukulele tuners Update - 8-13-24. I've designed a newer model which is stronger and better. It can be found here. Update - 4-21-24: I've been having some problems with the tuner peg breaking after being at tension for a while. I redesigned…
I wanted to have switched control over the two different 12v circuits (12v constant and 12v switched) used to make the harness. Included in the pictures is a mini diagram i drew and the part numbers for the two rocker switches i used. You…
Dial knob - para pantalla de prusa o similares.
This is the third iteration of my ukulele tuners. This new version has a number of improvements. Only two, #2 3/8 inch screws are needed per tuner, instead of 4 required for the model 2. Reduced backlash A new, easier to print, tuner knob…
I made this so you can hide your ktuner and so that you can keep a better view of the road by relocating it from the windshield. I also just think it looks really nice. I recommend using ASA to print and giving it plenty of walls. I have…
Dial knob - para pantalla de prusa o similares.
I wanted a way to carry my Yaesu FT-891 and its FC-50 antenna tuner as a unit. Pretty simple design. I recommend using M4x10 screws to attach to the radio. Print this on its side with support material under the handle. PETG worked very…
This is a model of the genuine Toyota part that helps redirect oil draining from your sump. It slots in between the sump and the bar that runs below it, to stop oil splashing onto the bar. This model is slightly oversized, as the vehicle…
This is a remix of the front signage from the GigaPenguin Tuner Shop. It should be printed at a .2mm height. See screen shot on how to print for multicolors using Prusa Slicer.
I used a 1" wood screw to assemble, along with an old drill bit that I cut the head off of with a hacksaw.
As a side-note: Be careful if you are working with roasted maple! While tightening the screws my headstock cracked. Nothing that wasn't fixable with glue and a jig, but still a word of caution. My designs are released under a public…
Print parameters at your discretion. Print hangers on the side. that's all.
Printed in PETG. The fit was ever so slightly loose in the Squire Strat guitar tuner holes. One layer of blue painters tape made up the difference and it worked great. Recommend marking your drill bit to the proper depth with some…
Add-on for https://www.thingiverse.com/thing:4709792 This is a case for the mAT-705Plus tuner to allow you to attach it to the “Icom IC-705 cover V3” by basstoshawn. It uses similar mounting hardware to what you need for the handles,…
Based on my previous headless gourd shape ukuleles, but instead of using off the shelf tuning pegs, I designed these 3D printable tuning pegs that is completely concealed. This design allows the unit to stand upright on its base like a…
Tuner knobs for bass/treble etc. on early 2000's and possibly late 90's Chevy and GM radios. Very faint D ring on the inside, you may want to edit to make more pronounced. Works on 2001 Chevy Suburban, mostly due to friction fit
Here's a collection on some very basic shapes intended to help some users tune their machines. It's easy to make these for yourself just by taking the basic cube and non-uniformly scaling it in your slicer, but not everyone is sure how to…
I made a tiny FEP tuner, just place this under your FEP film while tuning to get the right tightness of your film. The tuner has a height of 13mm wich gives your FEP the perfect slack before tuning.
I needed a case for my ATU-100 kit, and @Nikdfish's was almost what I was looking for. So, starting from there, I made some customizations. Thanks @Nikdfish! Aside from the printed parts, you'll need 8x 16mm M3 screws, 4x 8mm M3 screws,…
A wall mount for Ukulele with narrow ledges on the right and the left, to store a tuner and/or a capo. The mount works well with my Tenor and Soprano ukuleles. The mount prints without supports and is designed for two #8 screws. There is…
Whenever I see Kluson style tuners on a Gibson guitar, it makes me wish that they were glow in the dark. I made this model so that I can print a set of tuner knobs in glow in the dark PLA. These fit my Kluson locking tuners, so I'm not…
Modified ATU-100 auto tuner case based on this design: https://www.printables.com/model/80716-atu100-n7ddc-case Adjusted to use SO-239 bulkheads. If you want a case with BNC jacks then take a look at the printables link. Category:…
Precision Espresso Tuner - User Guide ⚠ Before You Begin: Coffee Selection is Key! No amount of fine-tuning can compensate for poor-quality coffee. It is highly recommended to use specialty coffee that is freshly roasted and suited for…
A simple drilling template for vintage style split-post guitar tuners. My Mustang's posts measured 24.5mm on center; yours may differ. I used vintage-to-modern conversion bushings, which were an easy fix for the oversized modern peg holes.
Remixed for NAPA signage. Same print settings as the rest of the model.
This model was designed for use in public schools, it may not be sold/used commercially. The grip on the CA-50 is meant to be slightly loose so that the tuner can be pushed in and pulled out of the clip easily, but also not slide out if…
Dial knob - para pantalla de prusa o similares.
V4 - 8-13-24 - initial release I recently designed tuners for my 3D printed ukulele. They worked pretty well, but there were some things that I wasn't wild about. Especially the two part washer that was used to hold the tuning peg in…
The radio rail will need supports due to the bend in the handle, but the other parts should print fine without as long as you print the files with the recess oriented upwards. To print on the opposite side, mirror the arts in your slicer…
This knob was made to replace the radio tuner knob on a Toyota Sienna (2004) but works well with many radios. Category: Automotive
This is a replacement foot for a Marantz receiver. These are 16.1mm high and 25.9mm in diameter. The photo shows an original and the duplicate. I print the foot in black PLA and the pad insert in black TPU.
A small part to hold the QRP Guys EFHW tuner onto a piece of standard plastic conduit when out and about on a sota summit. A few sizes of the thumb nut are included as it'll depend on if you'd like to glue the cap on or rely on a size for…
Introducing the new Mini Ukulele Tuner. 25% smaller than my full-sized soprano ukulele model 3 tuners , but strong enough for long term use and holding string tension. I use these Mini tuners on my Mini, sopranino sized, pocket ukulele .…
I designed this to replace the stock knobs on my Cordoba Stage, which were beginning to crack. Spruced up the design a bit with a partial f-hole pattern. I think the pegs should work on other Cordoba guitars as well.
I printed a tuner holder for my music stand so that it is in my view. I just had loaded transparent filament so that it looks a a little strange I printed it laying on its side in PLA It would be nice if you post your make. Thank you
I could not mount the D'Addario Planet Waves clip free guitar tuner (model PW-CT-21) onto the headstock of my travel guitar. The headstock of the guitar is so small that there is no way to attach it so that it would not interfere with the…
My goal for this project was not to make a novelty. It was not to make a junky temporary crutch so you can play your uke while a purchased set comes in the mail. The goal of this project was to make a real, useable set of tuners, fit for…
Handle for the JBL Tuner XL. The size of the tuner makes it rather awkward to carry with one hand. By adding this easy-to-assemble handle, the chance of falling is minimal. You simply slide the handle over the antenna, then secure it with…
This is a simple tactical sleeve to protect your ATU-100 tuner while in the field. Installs easily by sliding the tuner into the housing. For a semi-permanent install, add a dab of glue to the rear support section which will hold the case…
I couldn't get a hold of the Ukelele tuners in the original design, so I altered the design to fit these very cheap Amazon Ukelele tuners instead…
A HueForge print of a JDM style concept car. The original is almost 8" x 8" - You can resize the X & Y dimensions if you want but do not change the Z or you will reduce the layers and the swaps below will not be accurate. I printed mine…
Dial knob - para pantalla de prusa o similares.
A simple "one tier" temp tower so you can continue playing with retraction settings with a chosen temp.
My sons play trombone and they have a Snark Tuner and the stem broke so instead of having to buy a new one I made one and attached it to my kids Snark and it works perfectly! So much better than buying two new ones for $20.00. The black…
Build a simple Guitar Tuner with CircuitPython and Adafruit PyPortal! Use the touch screen to tap on tuning pegs and play music notes. The notes are pre-recorded wav audio files of guitar strings. The graphic of the head stock is a single…
My Yamaha guitar (an F370 Dreadnought) has small plastic washers between the tuning knobs and the worm gear shafts. Some broke - so the knobs started rattling around. I created this very simple OpenSCAD model to print some new washers -…
This little do-hicky will allow you to attach the tuner part of a Snark tuner to the hooks on your Goodtime banjo. I print it at 50% infill, .20mm, PLA+. This is a remix from: https://www.thingiverse.com/thing:4180336 - I reshaped the…
I've designed this based on a generic no-name electric guitar tuner, where the original plastic washer broke and flew away, never to be found again. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…
Holds the tuner underneath a thin stand. Pretty easy print. Let me know if you want one for a thick stand type
A simple wire former for building inductors such as those used in a T-match antenna tuner
Replacement part designed for D'addario mini guitar tuner.
The banjo I'm using has 50mm (2") spacing between the brackets so I designed this after the Stew-Mac bracket. Maybe this is a remix of the other similar designs on here, IDK.. I designed it from scratch in FreeCad 0.18 but looked at the…
Dial knob - para pantalla de prusa o similares.
this is a project box for the very popular ATU-100 antenna tuner kit. you need: ATU-100 kit 2 BNC connector 16mm latching button 16mm momentary button a set of feet some hot glue 4 plastic screws 5mm~ there are standoff for the board+…
Just mirror peg in slicer to flip it for the other side. Gears and everything else is original size. Just peg that is larger.
I have a dual din radio mount with a single din radio. I made this mount to use the bottom din for mounting a trailer brake controller and an Edge CTS2 tuner. As with all things that go in an auto, use ABS or PETG to withstand temps.…
This print makes it easier to tune your violin by helping you visualize the pitch of the notes. Choose which string you want to tune by selecting it using the 4 push buttons (they represent the strings), and the LED indicator will let you…
A stand to help keeping it in place while tuning your guitar. Print it sideways and enable supports.
The tuning machine buttons on my Kentucky KM-505 Mandolin started to crack, and a decent set from StewMac runs about $64+shipping ( $8 x 8 buttons). FYI, you can buy a complete set of low-end tuning machines with buttons for about $50, so…
3-27-2026 - I redesigned this after getting slight fitment issues. The old model was deleted and this one now fits as it should. I got tired of getting a glare on the screen of my MM3 tuner and not being able to see the screen clearly…
I saw someone with one of these on their banjo. I wanted one. Looked on here, and there are a couple models that do the same thing, but for banjos that have the hooks much further away than the Gibson style banjos have. Thus, I made this.…
Replacement pop-out tuner knob for the factory radio in my 2004 Chevrolet Astro; nearly identical to my volume knob for the same radio , but has slightly different dimensions (most significantly it's a bit longer). OpenSCAD source code is…
Made this for my guitar HSW, you can find more music accessory models on my profile . Fits into a standard HSW insert, most capos and clip-on tuners should be able to hold on. I recommend printing horizontally, here are my print settings:…
Raised KTuner Mount (10th Gen Civic) A taller version of my dash mount, designed to solve two problems with mounting the KTuner in the poverty button slot. Restores button access. The standard mount sits low enough to block the switches…
This model takes the original model made by Fux and has enforcements to make it less prone to breaking.
This model is intended to provide a starting point for anyone to make their own tuner to fit their instrument of choice. It has no mounting holes, so it really does require you to modify the design to fit your application. The gear ratio…
Harmonic Barrel Tuner for Fx Impact M4 5,5 (two alternatives) Use the lead sample to make a mold that will allow you to make the counterweight with molten lead.
Custom designed replacement side tables for MFJ-945E antenna tuner. Tuner does not have mounting holes so I made them. It is snap in replacement for original plastic side plates. There are two versions if part. One is simpler, uses less…
I used the tuners for the Libre Travel Uke https://www.printables.com/model/384349-libre-travel-uke but they didn't fit, so I made them thiner and shorter. The new post size is 7.5mm of diameter and 24mm tall (just for the thin part).…
This is a snap shut case for the QRP Guys EFHW Tuner. The print of the top cover requires supports around the wire wingnut posts. The rest of it should do ok without supports. In fact, it is best to block supports for the divots where the…
I thought the original design of these was great, but I didn't have any spare square nuts. I had a lot of hex nuts, so I redesigned this to use hex nuts instead. Suzuki-style fine tuners that will work on any string instrument, although I…
A stand for a BOSS guitar tuner. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2 mm Infill: 30% Notes: Print upright, no support is needed. Category: 3D Printing
This allows you to screw your D'Addario micro tuner into a tuning machine on the back of the head of your instrument. You can buy a tuner that comes with this plate, but I've never seen one so I don't know how this compares. Print in PETG…
Harmonic Barrel Tuner for Fx Impact M4 5,5 with air stripper Use the lead sample to make a mold that will allow you to make the counterweight with molten lead. Join the cone, body, and stripper with cyanoacrylate, taking care to maintain…
cover those 2 extra holes with the tow hook cover
This model needs to be printed and assembled in a specific way. Print & Assembly Instructions Use PETG or any filament that can withstand the heat of being in the car. Print the parts in the orientations saved in the 3MF file — those…
If you play the banjo and use a tuner, this design allows you to attach any tuner to the banjo pot instead of to the headstock. It's a lot easier to see the tuner display and the tuner gets a better vibrational signal from the body of the…
I got a Moog Claravox, and it has a tuner out jack, so while I was still using a microphone stand to hold up the theremin, I made this to hold a Donner tuner pedal. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports:…
Replacement battery cover for guitar Sonic Research Turbo Tuner strobe tuner, model ST-122. I recognise this is a niche design but perhaps someone out there will find this useful if their cover breaks. I strengthened the locking tab…
Xbox One Tuner Enclosure This project contains the STL files for printing a set of enclosures that will house multiple Xbox One tuners and provide a convenient means of easily connecting these to a host system. Why so many tuners?! Here…
Adapters to use tuners from a bass guitar with the Headless Baritone Ukulele
I've designed this spare part for my tuner clip, because the original broke. .1mm layer height. 20-30% infill.