Search results: turning

Sort order

247 models

P
Printablesbeerwema

Trimmer to potentiometer adapter/Trimmer with turning knob

Some time ago I built a radio with a microcontroller and an FM-IC. I used an ordinary single-turn potentiometer to tune the frequency, but this did not work as intended. It was really difficult to tune in a specific frequency since the…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant

Downloads
321
Likes
32
Rating
5
P
Printablesnmumphrey

Lathe Turning Tools Holder for Peg Boards

Needed to get my new lathe tools off the countertop so they wouldn't bang into each other. Figured I had a huge peg wall in my shop so I used MGX 's peg board program…. https://www.prusaprinters.org/prints/34992-pegstr-pegboard-wizard…

Print approx. €2.18–€2.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
181
Likes
27
Rating
0
P
PrintablesDom Cis

HELICONE HEAD - TOY - TURNING BUST

Put your head straight! Spin the segments to form a bust. CAN YOU GUESS OF WHO THE BUST IS? Each segment is numbered for easy assembly. The numbers are hollowed into the TOP solid. The stick is now printed horizontally - in direction of…

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant

Downloads
178
Likes
85
Rating
5
P
PrintablesEto2

A tool for turning the film sensitivity change ring for the Konica C35AF

A tool for turning the film sensitivity change ring for the Konica C35AF. You can easily change the film sensitivity even if the ring is stuck.

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant

Downloads
10
Likes
1
Rating
0
P
Printablesquibeck

Boomerang V5 – Light and Fast Returning

The Boomerang V5 – Light and Fast Returning is the latest refinement in an ongoing boomerang design series, tuned for maximum distance and a quick, reliable return. Weighing in at under 10 grams , this three-bladed boomerang achieves an…

Downloads
5,613
Likes
837
Rating
4.76
P
PrintablesTdibrian

Yarn holder with turning plate

MK3s+. 0,4 nozzle 0.3 layer. Holder 60% and plate 30% infill. PETG.

Downloads
2,734
Likes
379
Rating
3.88
P
Printablesquibeck

Boomerang V3 (Fast returning)

This is a fast returning Simple design boomerang, that is durable and should be thrown at 35° to 45° Printing: PLA or PETG

Downloads
1,313
Likes
282
Rating
4.25
P
PrintablesAlan Stratton

Wedgie Angle Templates for Segmented Woodturning

Each file creates a different angle template 10 for 36°; 12 for 30°; 16 for 22.5%; 20 for 18°; 24 for 15° Use your favorite print settings. Primary use is to set angle arms on a wedgie sled used to saw segmented for segmented woodturning.

Downloads
904
Likes
28
Rating
4.5
P
PrintablesRogue_72

3D-scan turning table

The goal of this project was to make a simple 3D printable turn table for 3D scanning of small objects. The model is hand-driven, by turning a knob that drives a worm drive with an attached scanning table. For 3D scanning using…

Downloads
823
Likes
85
Rating
4.78
P
Printablesdancan13f

Lucy the heart-turning cat

The originality of this piece is that the heart turns freely in the body of the cat. Print instructions Print Settings 1 x LucycatBody : Layer:0.20mm Raft:no Support:no Infill:15% 1 x LucycatHeart : Layer:0.20mm Raft:no Support:no…

Downloads
790
Likes
148
Rating
4.89
P
PrintablesMonkeyMK

Turning Table

3D Printed Turning Table. Top Plate: Ø140mm. For this project you need 29 countersunk head Screw M4x16, and 14 Screw M3x8 and 9 Bearing SKF 608-2RSH (Ø22 x Ø8 x 7mm) (The same used in most of the skateboard). The 4 Hole on the top plate…

Downloads
559
Likes
205
Rating
0
P
PrintablesGonper

No Touch Tool, retractable, door opener, key turning, pinch papers, push buttons...

I designed yet another No Touch Tool, did it retractable because if the areas that may touch contaminated surfaces are not enclosed somehow they may contaminate others like your pockets or your hands after it has been use. This tool is…

Downloads
548
Likes
121
Rating
3.5
P
Printablesmakerl1969

Teigblume / Turning Tool for Thermomix (by McBohl)

The turning tool is a small helper for the Thermomix (TM5) from the company Vorwerk for easier removal of dough. It was designed by McBohl . You can find his publication on thingiverse . With this one can easily turn the knife of the…

Downloads
468
Likes
33
Rating
5
P
PrintablesDRONEKHANA

Willy Jeep with turning wheels and suspension. DIY

You might need superglue or other strong glue that works on your filament type.

Downloads
447
Likes
101
Rating
3
P
PrintablesJanne

Brio 180 Degrees Turning

Brio 180 Degrees Turning Category: Mechanical Toys

Downloads
419
Likes
57
Rating
5
P
PrintablesMartinPP

Employees must stop crying before returning to work Sign

Funny Sign for bathroom of small business. Printed with two PLA Filaments. Color change at Layer change can be performed with almost any printer.

Downloads
403
Likes
185
Rating
5
P
PrintablesAlexNicole

Woodturning Segment Jigs

These jigs can be used to set a miter saw or a wedgie sled to the exact degree/angle for cutting segments of wood that then can be glued up to make rings for gluing a bowl blank that can be turned on a lathe. Currently included in the…

Downloads
382
Likes
35
Rating
0
P
Printablesrallekralle

turning and beeping TF2 sentry gun

USB-powered sentry with space for a 28byj-stepper, 30mm-ish speaker, and electronics. the lid of the magazine can be removed. the stepper needs to have the screw hole tabs trimmed down to fit. demonstration:…

Downloads
311
Likes
105
Rating
5

TTS-100 Turning Tool Setter for SVD-186R

https://tormek.com/en/products/accessories/tts-100-turning-tool-setter Use setter for distance of tool bar and protrusion of tool from model. I use with: https://www.printables.com/model/1329063-svd-186r-tormek-sharpening-guide

Downloads
290
Likes
12
Rating
5
P
Printablesppaukstelis

Herring bone pattern jig for pen turning

I recently saw some neat turned pens with herring bone patterns. Rather than glue individual pieces of plastic as the separators that help the colors stand off, I figured I would just 3D print the pattern so it can also serve as an…

Downloads
289
Likes
53
Rating
4.5
P
PrintablesSlic/d D/sign

Turning Torso of Malmö

I designed Malmö's landmark in Fusion 360 and it was a lot of fun. Especially the 90° turn of the building. The windows not so much :) I scaled the print to 180% because of the thin beams at the pointy side of the building and cut in in…

Downloads
279
Likes
18
Rating
4.5
P
PrintablesSuke

Faceplate for woodturning lathe M33 x 3,5

PETG, high infill, 0,3mm bottom layers and 0,15 mm threaded layers.

Downloads
182
Likes
19
Rating
4
P
Printablesjackharvest

My Customized Sweeping 2-line name plate (Have You Tried Turning if Off and On Again)

Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 10 textstring1 = Have You…

Downloads
168
Likes
18
Rating
0
P
Printablesjestempablo

Dyson Fluffy Laser turning connector

[edit @ Aug 5th 2025] 🔥 V3 is here! This version should finally address the weakest point with an added rim around the piece (or “lug,” if you prefer) that used to break frequently - the one the cable passes through. Since my last PETG…

Downloads
161
Likes
26
Rating
5
P
Printablesc13m3n7

Microwave turning plate replacement

Replacement piece for the turning plate of the Combi C105 microwave oven. Print instructions Category: Kitchen & Dining Summary Replacement piece for the turning plate of the Combi C105 microwave oven. It might fit yours, the outer shaft…

Downloads
156
Likes
16
Rating
0
P
PrintablesMattG

Wood turning organization

I designed the mountable holder to fit the Easy Wood Tools mid size turning tools, and the organizer bins are sized to hold 2" micro-mesh sanding pads, or 2" round sanding discs.

Downloads
153
Likes
36
Rating
0
P
PrintablesWilko

Woodturning Bowl 03

This is inspired by woodturning techniques and a variation of this little thing: https://www.prusaprinters.org/prints/103978-woodturning-bowl-02 If you like this little thing, you might want to check those ones, too:…

Downloads
145
Likes
25
Rating
0
P
PrintablesMedienstation

Turning Red Redpanda Fanart Figure Decor

I love this movie so much! So i made a cute little figure ^^

Downloads
143
Likes
22
Rating
5
P
PrintablesNeil Ramsay

Pen Turning Bushing Holder

This is a bushing holder for pen turning bushings. They slide onto the stem of the bushing holder, but don't slide back off. Each holder has a 3" x 5/8" tab for a label (good for the Avery 6870 2.25"x0.75" labels). The bushing holders…

Downloads
131
Likes
20
Rating
5
P
PrintablesHolzerMax

Woodturning - Rotary Bowl Sander Marius Hornberger style - M10 Version

Technically this is a remix, but there are not yet printable files available as far as I know. Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood. This one had worked very well for me, but I wanted to…

Downloads
129
Likes
25
Rating
0
P
PrintablesAlan Stratton

Woodturning Bushing To Make Scoops

These bushings (range of sizes) enable grasping the rounded end or sphere of a spindle. Please see my video for an application on www.AsWoodTurns.com From one end, the bushing is hollowed to accept a sphere of the given size. From the…

Downloads
127
Likes
15
Rating
0
P
PrintablesRWood

Centering and Off-Center Jigs for Eccentric Wood Lathe Turning

Use the jigs to mount wood blanks in a lathe chuck. One jig centers the blank, the other jigs allow for off-center turning. The blanks should be 1.5" to 1.6" diameter made with a 1.75" hole saw, and are used to create wooden pendants.

Downloads
126
Likes
29
Rating
0
P
PrintablesIcepick Designs

Luke/Vader Light Switch Plate: Turning to the Dark Side is Cheaper

I originally did this design in 2014: Now I know why Vader was so angry. He saw his electric bill. I made this as a reminder that following in Vader's footsteps is not only fun, but can save you some cash as well. Switch to Vader to go to…

Downloads
126
Likes
32
Rating
0
P
Printablesasylumph9

Turning a G-Scale 1:29 Bachmann 98908 Hopper into a Covered Hopper

First, I made the two top pieces: “Top Half A & Top Half B with 3-”Center Dowels" then glued them all together. I used “Glazing & Spot Putty” I bought from any auto parts store and hand spread it over the top but be careful not to get any…

Downloads
125
Likes
21
Rating
0
P
PrintablesSanderG

Adjustable Turning Desk Light

I wanted to have a desk light I could easily turn around and I didn't fancy buying one. I'm a maker, by Jove, I make things! In his 3d printer enclosure video , Jonathan from the Next Layer mentioned these cheap LED lights on Ali Express,…

Downloads
124
Likes
60
Rating
5
P
PrintablesQuasselkopp

Turning knob remix for Hubelino Elevator

This remix of the Hubelino Elevator offers users several options for upgrading and customizing the original model: Rotary Knob : A newly designed rotary knob has been created to replace the motor in the original model. This allows for…

Downloads
123
Likes
9
Rating
0
P
PrintablesAquablue71

REUSABLE MOLD FOR PEN TURNING BLANKS (120*20*24mm)

Since i have a new lathe i try to create also pens. I found this https://cults3d.com/en/3d-model/various/reusable-mold-for-pen-turning-blanks-makerneer model online. This is a good model, but it was too big for me so i designed a smaller…

Downloads
121
Likes
17
Rating
0
P
PrintablesWilko

Woodturning Basket 01

What's the difference between a basket and a bowl? Perhaps just some holes ;-) This is a variation of Woodturning Bowl 07. This might be a very challenging one in real live, okay in CAD and fine 3d printed. If you like this little thing,…

Downloads
117
Likes
22
Rating
0
P
PrintablesFonn Prints

Returning Boomerang (Low Filament Cost) (Extra Fast Printing)

A returning boomerang requires no special settings and has very low filament costs and a short print time. Has Been Tested If you like this model, consider tipping to support Fonn Prints and help us with future models and more!

Downloads
116
Likes
24
Rating
0
P
Printablesgabi123
18+

The source marked this model as adult content.

Downloads
114
Likes
34
Rating
0
P
PrintablesMakerneer

Reusable Mold for Pen Turning Blanks

I recently started getting into pen turning and needed a mold to make my own blanks. I initially intended to make a typical silicone mold but screwed that up. Being impatient, I decided to see if a TPU mold would work. Good news, it does!…

Downloads
114
Likes
31
Rating
5
P
PrintablesMakerMind

Wood Ring Turning Tool

in a few days, I will upload the video for this project. This Is a tool designed to help you turn wooden rings on a commonly sold mini-lathe. be careful not to overtighten the chuck otherwise, your ring will be likely to break as you turn…

Downloads
113
Likes
31
Rating
0
P
Printablesbvbreukelen

Disc Detainer Disc Turning Tool

Locksport is a great hobby, and a challenging one. Often it is needed to customise your tools to open just that lock you couldn't open with your current toolbox. This is a disc detainer - disc rotation tool. Before opening your disc…

Downloads
111
Likes
22
Rating
5
P
PrintablesChris

Finishing faceplate for woodturning lathe

This is an 80mm faceplate intended to be used for finishing turned work on a lathe. It is NOT for use when turning. It has a 1" X 8 TPI thread with 4 countersunk fixing holes on a 60mm diameter. I often have a number of pieces on the go…

Downloads
111
Likes
17
Rating
0
P
PrintablesDackeldil

Dust Collector 100mm eg for woodturning lathes

I designed a dust extractor for my lathe, which attaches to the hand rest via a rod. This allows the dust to be extracted precisely where it is generated during sanding. The connection fits standard 100mm dust extraction hoses. I printed…

Downloads
110
Likes
8
Rating
0
P
PrintablesProjunk

Parametric Ball Turning Tool for Lathe

Parametric Ball Turning Tool for Lathe I have been able to machine (mostly half) spheres in both aluminum and steel with this tool Required printed (or machined) parts: BallTurningTool_ToolBase.stl (1x)…

Downloads
108
Likes
16
Rating
0
P
PrintablesHolzerMax

Woodturning - Rotary Bowl Sander for 608 bearings - M8 version - 35 and 47mm pads

Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood, modeled after the nice but expensive Hope Pro Sander. This version fits the more “standard” 608 bearings. You can see the two versions in the third…

Downloads
106
Likes
31
Rating
5
P
PrintablesInqEnzo

Wood Lathe Turning tool caps

These caps are to keep my wood turning tools sharp between use. Wood turning tools are not dimensionally accurate as they don't need to be and as you sharpen them the size can change do to the steel not being a consistent size. For this…

Downloads
105
Likes
31
Rating
0
P
PrintablesHolzerMax

Woodturning - SuperNova Chuck Jaws

Use this at your own risk and caution! I needed some specialty jaws for holding a finished workpiece without damaging the surface. For this, I designed these special jaws to an exact fit. These jaws fit on the Teknatool SuperNova Series…

Downloads
104
Likes
11
Rating
4
P
PrintablesMatt Coy

Finishing Bushings for pen turning

I got tired of spending so much money on those nylon finishing bushings, so I made my own. I printed these at 100% infil in PETG no supports with the large base on the print bed.

Downloads
98
Likes
9
Rating
0
P
Printableschaoschris

Recaro Seat Adjustment Turning Knob - Rückenlehnenverstellrad für Recaro Sitze

Recaro Seat Adjustment Turning Knob Category: Automotive

Downloads
92
Likes
3
Rating
0
P
Printablesjtbl

Universal fingernail grinding jig for woodturning gouges

You can use the jig like you would a Oneway Vari-grind jig, or use it with a holder for bar guided systems like the Sorby ProEdge or Tormek and similar wet sharpeners. UPDATE : The main part of the jig now comes in 3 sizes : 16mm and 19mm…

Downloads
89
Likes
17
Rating
5
P
PrintablesBubeniCZECH

3D scan turning table - Otočný stůl

Turning table for 3D scanner. Bearing large diameter 47 mm, small diameter 20 mm, and width 14 mm. There are 4 pockets for 10x3mm magnets in the base. When printing, make a pause at a height of 3.6 mm to insert the magnets.

Downloads
87
Likes
11
Rating
0
P
PrintablesWilko

Woodturning Bowl 07

This is the bowl version of Woodturning Vase 05 and I think it really works great as a bowl. This might be a very challenging one in real live, okay in CAD and fine 3d printed. If you like this little thing, you might want to check this…

Downloads
85
Likes
26
Rating
0
P
Printableslorsmeister

Discsander Faceplate for Woodturning Lathe

This is a discsander faceplate for woodturning lathes. Put some self-adhesive velcro on it, punchout the holes (or don't), screw it on your favorit lathe, put some sanding paper on it and start sanding! I created and tested the M18x2.5,…

Downloads
84
Likes
19
Rating
0
P
PrintablesRene Berthold

turning table for airbrush with ball bearing

A rotating plate to simplify airbrush work. The model is placed on the plate and can be easily rotated thanks to the ball bearing. A ball bearing (Typ 6001-2RS) with the following dimensions is required for assembly: Outer diameter: 28mm…

Downloads
84
Likes
14
Rating
0
P
PrintablesWilko

Woodturning Bowl 09

You want straight walls and the beautiful cube pattern? Turn the axis of rotation by 90° and you're good to go. But you will lose the pattern on the bottom of the vase. Or is it a bowl or a trash can? The base pattern is a simple hexagon…

Downloads
82
Likes
20
Rating
0
P
Printablesdnlflf

Employees must stop crying before returning to work decal

0.2 mm layer height recommended PLA 3 color changes, total of 4 colors recommended No MMU needed

Downloads
80
Likes
38
Rating
5
P
Printablesseekerbot

Soft Tape Measure 20mm Spool with turning handle

I loved the spool holder this is a remix of... but I found it a little bit tedious winding it in... so I added a handle... In the image the left part is the original, the right one is the remix... I used 15% infill for most of the part…

Downloads
79
Likes
6
Rating
5
P
PrintablesLithicDesign

Pottery Turning Tools

These turning tools were designed to use at a potter's wheel for forming and trimming purposes. 100% infill is recommended. Print with the handle flat against the print bed and tip pointing up.

Downloads
78
Likes
23
Rating
0
P

Woodturning chuck jaw holder

I wanted to store my chuck jaws on the wall and the commercially available holders seemed over priced for what they are so I decided to make some 3D printed ones. Due to the size of the print bed I had to make it in two halves, so to…

Downloads
76
Likes
18
Rating
0
P
PrintablesAlan Stratton

Woodturning Chuck Jaw Templates for DIY Soft Jaws

No specific print settings required. For contrasting text color, change filament in top layers. Appropriate for VicMarc VM-120 chuck used for woodturning. Please see my video at https://www.aswoodturns.com/2022/08/soft-jaws/

Downloads
75
Likes
2
Rating
0
P
PrintablesAlan Lunsford

Cobra - Turning Interlocking Cube Puzzle

Goal: Assemble a 4x4x4 cube using all the pieces provided. There will be some surface voxels missing when the cube is fully assembled. But it's nearly a complete cube. Instructions: Print one of each piece in the attached file. Assemble…

Downloads
73
Likes
13
Rating
5
P
PrintablesIbex

Nock Turning & Installation Tool

Easy way to align your nocks to the right position for maximum accuracy. If you hit your own arrows as a consequence, you also might need a suiting nock extractor at some point. Also check out the Ultimate Archery Companion . Printing is…

Downloads
71
Likes
15
Rating
0
P
PrintablesWilko

Woodturning Bowl 06 (Sleeper Bowl)

Another variation of the Woodturning Bowl 04. You might call this one the sleeper bowl. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into single colors and…

Downloads
70
Likes
17
Rating
0
P
PrintablesYu Li

A small handle for the manual turning nob

The original design's nob is not very easy to turn, especially to smaller hands(my son). So I have designed this little handle to attach to the nob which makes turning much easier!

Downloads
66
Likes
15
Rating
5
P
PrintablesAlan Lunsford

Worm - Turning Interlocking Cube Puzzle

Goal: Assemble a 4x4x4 cube using all the pieces provided. There will be some surface voxels missing when the cube is fully assembled. But it's nearly a complete cube. Instructions: Print one of each piece in the attached file. Assemble…

Downloads
65
Likes
15
Rating
5
P
PrintablesWilko

Woodturning Bowl 02

Inspired by woodworking techniques I tried a variation of a simple stacking pattern. If you like this one, you might want to check this too: Everything is based on this simple pattern: If you like this little thing, you might want to…

Downloads
64
Likes
15
Rating
0
P
PrintablesDes Troy

3d Printed Stack able Turning Earring Holder

I designed this for vending events I go to and was told I should post the files so I decided to go ahead and do that… I printed this on my Sovol SV06+ using what I had left of a few different spools.This is fully stack able and the sky is…

Downloads
63
Likes
19
Rating
0
P
Printablesfuhsaz

Car Wars Turning Key

Turning Keys for Car Wars in 1X and 3X scale including the additional tick marks needed for Bootlegger Reverse and T-Stop maneuvers. Print each half and glue them together. These are quite thin so I am unsure about printing them without a…

Downloads
62
Likes
3
Rating
0
P
PrintablesBootjevaarder

Turning Table / Caroussel Ø 15 cm with bearing balls

Put anything on it you want to turn around. Printing I printed with PLA+, layer height 0.2 mm, on a smooth build plate. Assembly Place the Separator on top of the Base Plate. Place eight bearing balls in the groove of the Base Plate .,…

Downloads
60
Likes
16
Rating
0
P
PrintablesExperiential

XRP Zero-Point Turning Radius Chassis

This chassis was designed by Cornell University students with the following features: Zero-point turning radius Caster/omni-wheel dual mount Half-hex rails optimized for 3D printing and future-proof for a potential injection molded…

Downloads
60
Likes
5
Rating
3
P
PrintablesPeterH1500

Woodturning Chisel, Gouge & Tool Edge Protector

Updated 30Apr23 - See below… This is a variety of push-on protectors for woodturning chisels. If, like me, you tote your woodturning tools to various venues in a toolbox, where they can rattle around and crash into each other and the end…

Downloads
60
Likes
6
Rating
0
P
PrintablesWilko

Woodturning Vase 05

Same base pattern as the vase before, just changed some dimensions and the shape of the vase. I like the left one a bit more but you'll need support to print this. The right one is optimized for printing without support. This might be a…

Downloads
59
Likes
6
Rating
0
P
PrintablesAlan Lunsford

Asp - Turning Interlocking Cube Puzzle

Goal: Assemble a 4x4x4 cube using all the pieces provided. There will be some surface voxels missing when the cube is fully assembled. But it's nearly a complete cube. Instructions: Print one of each piece in the attached file. Assemble…

Downloads
59
Likes
9
Rating
5
P
PrintablesBrownButGreen

Revo Nozzle Turning Tool

I used LowRob's idea and redesigned it more to my liking - but the exact same concept. I recommend a height range modifier from the build surface up to 35mm and make it a “Fuzzy Skin” for easier grip. You should be able to print it with…

Downloads
57
Likes
5
Rating
5
P
PrintablesAlan Lunsford

Hydra - Turning Interlocking Cube Puzzle

Goal: Assemble a 4x4x4 cube using all the pieces provided. There will be some surface voxels missing when the cube is fully assembled. But it's nearly a complete cube. Instructions: Print one of each piece in the attached file. Assemble…

Downloads
56
Likes
9
Rating
5
P
Printablesclairelg

Quail Egg Turning Tray

I couldn't find anything easy enough to turn my quail eggs while they were in the incubator so I made a solution.

Downloads
56
Likes
12
Rating
0
P
PrintablesExtraTricky

Face Turning Octahedron Puzzle

This model requires support material, and it is important that the undersides of the floating areas are clean, so I highly recommend using a dedicated support material for the interfaces. OpenSCAD file is included for the brave who want…

Downloads
56
Likes
13
Rating
0
P
PrintablesWilko

Woodturning Vase 01

Still playing with woodturning techniques. Same pattern as for the https://www.prusaprinters.org/prints/102766-woodturning-bowl-01 , but a different result based on the different shape. If you like this little thing, you might want to…

Downloads
55
Likes
7
Rating
0
P
PrintablesHolzerMax

Woodturning- Crown Revolution Sandpaper adapter

I needed to sand the inside of a narrow but deep woodturned part (for a “Weizenholz”). It is very dangerous to sand the inside by hand, and you can't reach the bottom anyways. This is a adapter for the Crown Revolution tool (I have the…

Downloads
55
Likes
13
Rating
0
P
PrintablesMORPHIUS_LABS

SOVOL SV08 DRAG CHAIN 120° TURNING TOWER CONNECTOR

Welcome to the turning drag chain gantry connection tower. It is the best way to give the cable freedom in turning by a moving toolhead. So check out the pictures and if you like it → build it!

Downloads
54
Likes
10
Rating
0
P
PrintablesModel Magic

Wheel of Fortune - Vanna White - Turning Letters Since 1982

Wheel of Fortune - Vanna White - Turning Letters Since 1982 3D printable model.

Downloads
54
Likes
12
Rating
0
P
PrintablesWilko

Woodturning Vase 04

Still playing with woodturning patterns. This might be a very challenging one in real live, okay in CAD and fine 3d printed. If you like this little thing, you might want to check this too:…

Downloads
53
Likes
14
Rating
0
P
PrintablesBoopidoo

Heewing T2 Turning Tail Wheel

Turnable tail wheel for Heewing T2. The original landinggear is good but I missed a turnable tail wheel as well as a better way to quickly attach and detach the landinggear. Also mount knobs for quick assembly of landing gear without…

Downloads
53
Likes
5
Rating
0
P
PrintablesKrystek

Stand for turning chisels

Hanger for turning chisels in two sizes

Downloads
52
Likes
7
Rating
0
P
PrintablesCreeps

Turning knob

A simple knob I designed for a table fan. Print it up side down.

Downloads
51
Likes
6
Rating
5
P
PrintablesGoldfire

Lathe Turning Inserts Wall Mount

Wall mount for turning inserts boxes with max size of 42mm x 12 mm > Print materiel used: Filament PM Black PetG. > Support: No support needed > Infill: 15% Gyroid.

Downloads
51
Likes
12
Rating
0
P
Printablescamdotcam

Turning Handle for Table Saw

Replacement handle for a Ryobo table saw, or other handles mounted to shafts. 8.75mm shaft protrudes from the table saw, and this drives a screw to wind up the height of the blade. This should suit most applications with a similar shaft…

Downloads
49
Likes
8
Rating
0
P
PrintablesWilko

Woodturning Bowl 04

Still playing with woodturning patterns. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into single colors and than patterned along the dotted lines. If you like…

Downloads
48
Likes
12
Rating
0
P
PrintablesWilko

Woodturning Vase 08

This is based on the internals of Woodturning Vase 07 and prints completely without support structures. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into…

Downloads
48
Likes
9
Rating
0
P

SHOOTING TARGETS with SELF-RETURNING BASE

This is a set of small targets to be shot at with airsoft guns or really any other gun replica. I have designed only a few shapes thus far, but I hope to add more soon! The base is separated from the rest of the target, so should the…

Downloads
48
Likes
10
Rating
0
P
PrintablesAlan Lunsford

Boa - Turning Interlocking Cube Puzzle

Goal: Assemble a 4x4x4 cube using all the pieces provided. There will be some surface voxels missing when the cube is fully assembled. But it's nearly a complete cube. Instructions: Print one of each piece in the attached file. Assemble…

Downloads
48
Likes
6
Rating
5
P
PrintablesMarian Adam

M6 Hex screw big cap for manual turning

this is a model for a cap for M6 hex screws no supports needed 0.2 layer height

Downloads
48
Likes
1
Rating
0
P
PrintablesTaisto

K1 Max riser turning your printer into a transmogrifier

This is a modified wall section of the K1 Max riser made by Fred Boisselier to include the model number “Transmogrifier 3000” familiar from Calvin and Hobbes comics. Why 3000? Because it's better than 2000! To stay true to the original…

Downloads
48
Likes
9
Rating
0
P
PrintablesWilko

Woodturning Bowl 05

Variation of Woodturning Bowl 04. The shape is more roundish but will need support for printing. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into single…

Downloads
47
Likes
17
Rating
0
P
PrintablesDackeldil

Rubber attachment for live centres (Woodturning balls)

I designed two different attachments for the live center for turning balls. The attachment simply attaches to the standard 60° center to clamp the workpiece without damaging it. Printed from TPU with 20% infill. Update: Added Modell…

Downloads
47
Likes
9
Rating
0
P
PrintablesCrackFox

Red bull RB14 turning vane

Turning vane for RB14 similar to 2018 Spanish GP. Pictures are after some rough post processing. You must take the barge board off prior to removing the turning vanes to have the right layering on the aero bits. if you hate this you can…

Downloads
47
Likes
9
Rating
0
P
Printablesppaukstelis

3/4"-10(F) to 1.25"-8(M) adapter (woodturning)

Robust live centers (and others) have ¾"-10 TPI threads for accessories. This adapter lets you put a 1.25"-8 TPI chuck onto this live center. This can be useful for centering or for reverse mounting on some clean-up operations when you…

Downloads
47
Likes
3
Rating
5