Playing Card Shuffler v3
Update 18. 4. 2023: added 68x44mm card version (print big wheel 2x - there is not middle one). I don't have small cards and confirmation it works fine - please see discussion)…
- Downloads
- 17,461
- Likes
- 3,457
- Rating
- 4.47
8,955 models
Update 18. 4. 2023: added 68x44mm card version (print big wheel 2x - there is not middle one). I don't have small cards and confirmation it works fine - please see discussion)…
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
This shopping cart chip is designed for shopping carts in the EU/Germany. The chip is made of durable material and has a special shape that fits perfectly into the slot of a shopping cart. The chip is easy to use - Just insert it into the…
License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails (Instant access to 44+ models) Hey everyone! 🦊🍂✨ I’m so excited to share this adorable Flexi Baby Red Panda with you…
As the name in the Title might suggest, this is the Cabelcuff its a cable organizer/tidier to doing the same job, that a zip tie or a wire wrapped around your cable bundle would do, but quicker, reusable, 3d printed and with a really…
Print-in-place handcuffs with key. Requires small sanding after removing supports, also works much better with a little bit of silicon grease on teeth and key. There is a guide at lock mechanism, to make handcuffs rigid and to prevent…
One piece Luffy Gear 4 ! Boundman version!
Stay Puff Marshmallow Man.
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
The simple ear cuff prints fine, the “V” shaped one is better printed at slower speed.
Preface I bought a Shop-Vac and Cyclone Dust separator a while ago; The Vacuum came with a 40mm hose, which is just not the best choice for a semi-static dust collector installation. I ordered a 60mm hose and had to solve the problem of…
Cookie cutter of an all known character from the movie Shrek. For the most common cookie size scale it down in the slicer. Scale factors: X 50%, Y 50%, Z 100%
With this upgrade you can keep your filaments dry and organized in a very small footprint. You do not need anymore the filament buffer. These designs should be compatible with all 200 mm Spools which has a round (Das Filament type) or…
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
I added a loop to my UFO model, so it can be attached to a keychain. The UFO is made out of three parts, every part can be printed in a different color/material. (I used a luminescent filament for the top) The parts fit very tightly…
EN: This is a toy pillory handcuff whose locking piece can be moved and then secured with a rope, a padlock, a carabiner or simply a bolt and nut. At the request of the youngsters, the wrist holes are designed to be rather narrow at…
I made this credit-card size cuff link card for the Prusa Fashion Contest. Ever had one of those moments where your shirt needs cuff links, but you packed in a rush and you left them at home? This print is designed to solve that problem,…
The design is my own. Its easy to print, with no supports. If you need feel free to glue parts together. Default file are 7x5 bottles (maximum Prusa i3 print bed) and 20 degree stand. If you wanna change number of bottles or degree of…
Eine einfache kleine Aufbewahrungsbox mit Deckel aus PLA. Ist fast ident wie meine Feuchttücher Box, nur der Deckel hat mehr Spiel und für das Gelenk habe ich 2x Schrauben M3x12 mit 4x Beilagscheiben und 2x Sicherungsmutter vorgesehen. A…
Looks like the Rusty Bucket from Ben 10 but it's actually Eagle 5 from a Star Wars parody - Spaceballs! Check out my other stuff in my patreon page www.patreon.com/wekster and on my youtube www.youtube.com/wekster
I used the next settings : -15% filling -0.15mm quality layer height - support on tray only
A 40° wedge for the Eufy E340 dual video doorbell, featuring room for wiring. It may also work with other Eufy doorbells if the backplate form factor is the same. The wedge has separate wall and backplate attachment points: a pair of…
This slug trap consists of three parts: The ring shaped 'feeder' is placed on the garden ground and is filled with slug pellets (based on Iron III phosphate). The 'peg' is pierced through the middle hole of the feeder and holds everything…
Find english version below... Box bzw. Behältnis zur Aufbewahrung von AA-Akkus (HR6) und/oder AAA-Akkus (HR03). Unterschiedliche Bereiche und Farben dienen der Unterscheidung ob die Akkus VOLL aufgeladen oder LEER sind. Die…
Color order: White, Red, Black. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back down.…
BvB Einkaufschip in der Größe einer 1€ Münze.
Update 04.01.2024: I noticed a few mistakes, most importantly the screw size for the front tunnel, which is M3x12mm and not M3x10. I did some changes to the model because I noticed I was measuring the height at the wrong place. While I…
Cheep Cheep the Puffer Fish from Super Mario Brothers.
Hold your chopsticks together until it's time to eat, then keep your table clean with this dual-purpose chopstick cuff holder and rest. Add a touch of elegance to a dinner party or just prevent losing your chopsticks during a meal on the…
X-wing from Star Wars www.youtube.com/wekster
Print with the stop pointed up, no support, 15% infill. I did 1mm walls and top/bottom layers with a 0.4mm nozzle at 0.2mm layer height.
EN: This is a folding toy pillory handcuff that can be locked with a padlock, a carabiner or simply a screw and nut. At the request of the youngsters, the wrist holes only have a diameter of 48 mm. For ‘adult use’, you can simply scale…
“How much air filtration do you want?” - “Yes” ------------------------------------------------------------------------------------ Giant Bagpack Airfilter for the PRUSA CoreOne using 250x370 mm IKEA FÖRNUFTIG HEPA- & Carbon-Filters (18…
A 3D model for carpet trimming: a guiding tool that helps you achieve even trims effortlessly. The model can be printed in separate parts (floor and handle), which can be aligned and glued together. Alternatively, you can print it as a…
Simple clip with which e.g. cycling gloves or other light textiles can be easily hung up. I use it to store my cycling gloves, balaclavas, etc. with the rest of my cycling clothes and hang them up to dry. Einfache Klammer, mit der z.B.…
Schlüsselanhänger mit FFW (Freiwillige Feuerwehr)
I added a modifier to make it easy make a "furry" cat in it. =D Material: Several type pla Layerheight : 0.15mm Support: No Seam painting: Yes (on the back of the model)
Muffenstopfen DN110 nach Norm Zur Abdeckung von Rohren
Gewürzschaufel zur einfacheren Entnahme aus Gläsern und Beuteln. 4 verschiedene Ausführungen angelehnt am Design der Ankerkraut Gewürzschaufel, aber mit besserer Außenkontur passend zum Innendurchmesser der Gläser. Kleine Version:…
This simple stand is designed specifically for the Puffco Proxy vaporizer. It securely holds the Proxy while keeping it steady and upright, when not in use and on display. The stand is compatible with the stock Puffco Proxy glass,…
A simple yet elegant and fast print Hufflepuff coaster for your hot or cold beverages.
GEKA Schnellkupplung auf ¾" Schlauchanschluss. Gedruckt in PETG. Die Gummidichtungen gibt es im Baumarkt einzeln oder z.B. bei Amazone. https://www.amazon.de/gp/product/B079W6C1NG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Gedruckt…
eine praktische Silika-Dose findest du hier: https://www.printables.com/de/model/607142-silika-dose-silica-tin-silica-container
Immer beim einkaufen fehlt mir ein Chip oder eine münze für den Wagen
Constantine St. Benedict Zippo Stash Box.
Create several inserts for screwdriver or other stuff without the need to fix it on the honeycomb with a screw. Screwdriver Hook 20mm (0.787in) Hook 40mm (1.575in) print with Orange Prusament.
Osteranhänger für den Osterstrauß weitere Modelle: Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen Osterhasen unterm Baum Küken…
A mini 'cuff link only' version of my EDC (Emergency Debonair Card) I had a few requests to make just the cuff links, so I made a mini version that holds 2. There's also a credit card sized version with x6 here. Key Features: Includes one…
M16x1.5 threaded blind stuffing to close unused M16-openings in housings. Unused PG9-openings or PG11-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases…
This watering can attachment makes it possible to water with pinpoint accuracy even with large watering cans (10 L).
UFO as described by Bob Lazar
Visitenkarten Eierbecher Neuauflage . ( Verbindungsstege zum ausbrechen optimiert, zentrale Verbindung mit Füge-Hilfe versehen, eine Öse zum geordneten Aufhängen und Logo ) Kann platzsparend z.B. zum Campen, auf Ausflügen und in den…
Need a pair of cufflinks for your new dress shirt? These knurled cufflinks will get the job done! More designs coming soon! Printing Tips! The post and head may need to be scaled slightly in your slicer. Scaling the head to 105% and the…
Muffenstopfen DN110 nach Norm Zur Abdeckung von Rohren
Filamnt changes: grey, gold, black, red
Easy to make a cute Pufferfish keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
I never knew where my hearing protection, or safety glasses are, so I made a combined holder for booth of them. It can accommodate bigger earmuffs and glasses. I tried to minimalize the required wall space, and make the design easy to…
This is my original design. It is similar to a circle template. The circles match the outside diameter of galvanized or black pipe made to imperial NPT standard gage. This was a tool of necessity. I was insulating pipes under my house. At…
Hole measures 73mm in diameter and 42mm deep, with the cuff and larger gears being flexible. The smaller pinion gears and their stays can be added after fitting the cuff and are rigid. The little "spikes" have an M6 bolt pattern and can…
Update 2024-12-22 : Added a new version with more space for extensions and wider space for sleeved cards. I didn't like that the cards had to be divided into three stacks. So I built this insert where you can store the normal deck cards…
EN: This stand allows you to place the Sonoff SNZB-06P presence sensor on flat surfaces like shelves or cupboards without wall mounting. Uses the included magnetic plate for secure hold Slot for easy routing of the USB cable Recommended…
nach 3mm Druck habe ich die Farbe gewechselt
for English Documentation and Video see below Achtung: es gibt ein Nachfolgemodell: einfacher und flexibler: https://www.printables.com/de/model/853272 Diese gebremste Filament Zuführung passt unter anderem zu meinem Filamentspooler . Sie…
toilet seat buffer, I printed it in PLA and works just fine. Created with OpenSCAD
Buffer space hook which allows screwing the buffer 10° angled.
Chibi version of D7 class Klingon battle cruiser www.youtube.com/wekster
Der Halter besteht aus vier stapelbaren Trägern, einem Deckel, der den obersten Träger abdeckt, und einem Ständer, in dem der Stapel aus vier Trägern und Deckel aufbewahrt werden kann. Deckel und Träger sind mit Höhenbereichsmodifizierer…
Chip in der grösse einer CHF 2 .- Münze
I saw the head with headphones by Master Gadget and liked the idea, but didn't want to print them attached to the head. My daughter wanted a cat head and so I decided to create some that could be attached to any head. Enjoy! Printing: I…
Hey there, Here I have some removable shopping cart chips. Just insert them proberly and remove 'em after your cart is freed from the chain. The initials on the blue one are customizable (Fusion 360), therefore donwload the .f3d document.…
I never knew where my hearing protection, or safety glasses are, so I made a combined holder for booth of them. It can accommodate bigger earmuffs and glasses. I tried to minimalize the required wall space, and make the design easy to…
PTFE-Schnellkupplungen zwischen MMU2S und Puffer Print instructions Um die PTFE-Schläuche zwischen MMU2S und Puffer möglichst einfach und schnell abzutrennen habe ich zwei Adapter für den S-Puffer zum Drucker (Typ C1) entworfen. Vor allem…
Einkaufswagen Chip am Mittelfinger mit Loch für den Schlüsselbund. Shopping cart chip on the middle finger with hole for the key ring.
Dieser Einkaufswagen-Chip ist mit dem ikonischen Audi Logo verziert und hat die Größe eines 1-Euro-Stücks. Das Audi Logo, bestehend aus vier ineinander verschlungenen Ringen, ist in der Mitte des Chips zentriert. Der Chip wurde speziell…
Einkaufschip mit Loch Am Stabilsten mit 100% Infill
for English see below Bisher habe ich Lautsprecherkabel und Netzwerkkabel aus dem Bühnenbau auf Kartonagen gewickelt. Jeder kennt wahrscheinlich das resultierende Problem: es entstehen Kabelschlingen, je länger das Kabel umso schlimmer.…
HasLab Proton Pack that was released in January of 2023 came with 3 mini Stay Puft Marshmallows and 6 swappable heads. In order to display all 6, I needed 3 more bodies. I used the model from Nanotech76 to start with. I removed both the…
Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: This new…
Der Einkaufschip hat die Größe einer 1€ Münze.
Die Ohren werden in den Oberkörper gesteckt, die zwei Körperteile werden verklebt
Printing and using this bottle opener will significantly increase the chances of the Buffalo Bills winning the Super Bowl. Printed in PLA with two colors. Insert a penny to allow this tool to open bottles. It is press-fit Enjoy! Go Bills!!
I was looking for a really simple trolley coin without any text on it and then came up with this design. After fiddling around with printed models I figured the hole in its middle is pretty neat because it reduces the amount of filament…
After slacking/slaving away all week long in my T-shirt and jeans, I like to dress up in my stiff collar shirt with cuff links. Don’t we all?! So you’re going to want to use this ready-made cuff link base design for all your wonderful…
This is a 2-part glue gun stand . I designed it to hold the FMGG6996 (TY-G6006) 80W glue gun, which I bought in Kaufland , but I think Lidl had the similar sized ones. The gun's front part, which goes in the stand is 30x46 mm, and the…
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset.…
Version 2 mit Halterung für Kabelbinder auf der Rückseite
This air compressor muffler was designed for my commercial air compressors automatic dump valve. It turns the sound from startlingly loud to a reasonable hiss. Print in PETG at .2mm set 4-6 Perimeters. Set infill to Gyroid and about 10%…
a shopping cart token that you can pull out of the shopping cart after unlocking it
Habe hier ein Modell gemacht um einen Abluftschlauch für eine Klimaanlage durch ein Plexiglas nach draußen zu führen. Die Plexiglas-Scheibe hat einen durchmesser von 4mm und wird von außen/innen vor dem Fenster mit Klebestreifen oder…
Nr. 1: Infill 100% Nr. 2: keine Boden/Deckschichten 3 Perimeter Infill: Bienenwabe 30% (Honeycomb) Nr. 3: keine Boden/Deckschichten 3 Perimeter Infill: Stütz kubisch 50% (Support Cubic) Nr. 4: keine Boden/Deckschichten 3 Perimeter Infill:…
Zweifarbiger Einkaufswagenchip Entsprechend Anleitung aus
Einkaufchips die ich immer im Einkaufswagen stecken lasse, damit sich der Mensch nach mir im Supermarkt, darüber freut :-) Karmapunkte sammeln :-) 24.25 mm x 24.25 mm x 2.38 mm in der Größe eines 50ct Stückes.
Multimaterial - MMU 3 Multicolor Print-MK3.5S with multi colored segmenter-r3 This is a Remix / Revisitation of the original .gcodes of MMU3 Multi Material Unit. These .gcode are specific for printing by MK3.5S, and are provided by…
The original parts do not make the buffer stable, and attaching it to the printer is not an option with the enclosure. The model contains several parts: a higher leg (+1 cm), a back-, top and bottom segmenter with honeycomb, and a plate…
Kufic Script Serving Tray or Plate *Roughly translates to “Eat More Peaches” *No it does not. I have no idea what it says… so if you know how to read Arabic Kufic then please let me know if it is NOT COOL. For those interested this…
This is a small rain cover for a eufy Doorbell 2K HDR T8200 with optional mounting wedges (15° or 30°). I glued the 30° mounting wedge to the rain cover with epoxy glue and attached it to the wall with the eufy mounting plate and 3.5x40mm…