Search results: uhf

Sort order

258 models

P
PrintablesBearVision3D

Stealthburner rapido 2 uhf plus with cpap

This stealthburner model includes the mounting of a Phaetus Rapid 2 Plus UHF hotend and a CPAP for cooling, retaining the possibility of also mounting the Canbus if desired

Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant

Downloads
77
Likes
15
Rating
0
P
PrintablesDL2MAN

VHF UHF Moxon Antennas

This is a set of files to build a 2m and 70cm moxon antenna. Inspired by David (DL1DN), known on youtube as “QRP lifestyle”, but his design was not available for DIYers. So I decided to design it from scratch and pusblish it for others.…

Downloads
1,631
Likes
137
Rating
4.7
P
PrintablesCharlotteBeLike

Phaetus Rapido UHF CAD Model

I was making a modification to the EVA 2.4.2 toolhead that allowed the use of a Rapido UHF hotend. I tried to find a STEP model for it online but after ~30m of searching, I couldn't find the ultra high flow (UHF) variant as a model. I…

Downloads
1,397
Likes
43
Rating
5
P
PrintablesFabreeko Speedy

EVA 3 Beacon Probe UHF / Volcano Ducts

I suggest ordering the unassembled or Low Profile variant of beacon, or you may run into clearance issues. You MUST edit your config to make sure you don't hit the probe on your rear Z-axis lead screw constraint! :) 3.17.23 Update v1.3…

Downloads
858
Likes
104
Rating
5
P
PrintablesBaze

Rapido v2 Plus (UHF) StealthBurner Print Head

Remixed Voron printhead for Phaetus Rapido v2 UHF. Extended fan ducts to specs in Phaetus model without lowering hotend.

Downloads
804
Likes
63
Rating
5
P
PrintablesTX_Ryan

Stealthburner Phaetus Rapido UHF

Update : I'm going to leave this post up, but I would recommend AGAINST using my files for this mod. Instead use the github project below that is more complete.…

Downloads
718
Likes
89
Rating
5
P

Rapido 2 UHF Stealthburner Kit- LW Toolhead

Decided to update the Stealthburner for the Rapido 2 UHF version. This is a remix of the amazing UHF mod by bythorthunder. (https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf) This…

Downloads
666
Likes
61
Rating
5
P
PrintablesTX_Ryan

Wishbone Voron Mantis CPAP Part Cooler Duct Rapido UHF

I love my Voron 2.4 300, but I've been bothered by how PLA print speed is grossly cooling bottlenecked. I haven't seen a CPAP based mod for the Mantis toolhead that I could just slap right on to replace the stock ducts so I made one…

Downloads
594
Likes
114
Rating
5
P
PrintablesWenen

Voron Stealthburner Rapido 2 UHF V2

I made a modification for the Rapido 2 UHF hotend that works with the Stealthburner front hood. This way, you don’t need to print a new front —you can use your existing one. I created an extended duct to improve airflow under the nozzle.…

Downloads
543
Likes
40
Rating
5
P
Printables3DPrintDemon

Yavoth Toolhead Demon Remix For Rapido 2 UHF, Orbiter 2, BTT Eddy, EBB36, Voron, SV08

Please be sure to hit the like button as this really helps me out here! Also be sure to post a make too! Would love to see your prints & installs! Here's my remix of these awesome files from chirpy2605 to bring them all together in this…

Downloads
537
Likes
227
Rating
5
P
PrintablesBaze

Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF

Remixed version of Panzarkatten's HEX Remix mod of 3DO Nozzle camera mount for Voron Stealthburner UHF Version and Big Tree Tech's KNOMI Stealthburner face plate. Hex Version.

Downloads
460
Likes
62
Rating
5
P
PrintablesClessi

Simson S50 S51 Kofferraum unter Sitzbank Handschuhfach

Kofferraum für den S50/S51. Deckel und Körper sitzen sehr straff zusammen. Ich habe die Dateien vom Vorbesitzer übernommen. Die STL. Dateien sind falsch skaliert. Diese müssen auf 10% skaliert werden, damit diese passen. Die 3mf Dateien…

Downloads
396
Likes
44
Rating
4

VORON Stealthburner with CPAP, Toolhead PCB and Rapido UHF

This is a Voron Stealthburner for a Rapido UHF with A CPAP and a toolhead PCB. Please note that I didn't print it myself but did only the CAD work. If you encounter problems or see ways to improve the construction, please let me know. You…

Downloads
376
Likes
84
Rating
5
P
PrintablesYathani

Rapido UHF EVA 3.0

modified Rapido mount for EVA 3 by removing the overhang

Downloads
313
Likes
37
Rating
5
P
PrintablesJediOne

Stealthburner + KNOMI+ Rapido UHF + LGX Lite + SB2209/SB2240 + 3DO NOZZLE CAM

Front face for Stealthburner incorporating the following: BTT KNOMI Rapidio UHF 3DO Nozzle Camera LGX Lite SB 2209/2240 Remix of Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF by Baze & Stealthburner /LGX Lite/EBB 2209 by…

Downloads
312
Likes
36
Rating
0
P
PrintablesChris Nolan

Stealthburner cowling for Knomi 2 with Rapido UHF

The Knomi 2 Stealthburner cowling, but for use with Rapido UHF. Prints with Voron slicer settings.

Downloads
292
Likes
22
Rating
3.67
P
PrintablesBaze

Hex Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF

Remixed version of Panzarkatten's HEX Remix mod of 3DO Nozzle camera mount for Voron Stealthburner UHF Version and Big Tree Tech's KNOMI Stealthburner face plate. Plain Version.

Downloads
286
Likes
38
Rating
5
P
PrintablesLiselotte111

Stealthburner toolhead Haldis Red Lizard K1-UHF

Stealthburner toolhead for the Haldis Red Lizard K1-UHF. This is a Rapido style hotend which can be found at Aliexpress . It features a 115W heater while still fitting the regular Stealthburner front. Rapido speeds for a lot less $

Downloads
260
Likes
25
Rating
4.5
P
PrintablesfreakyDude

Voron 2.4 X Carriage Eddy for StealthBurner HF/UHF

Description This is a custom X-carriage designed specifically for the BigTreeTech Eddy Bed Level Sensor , based on the original Voron 2.4 X-carriage . Instead of the standard probe mount slots, this remix uses insert nut positions ,…

Downloads
255
Likes
43
Rating
0
P
Printablesf1nsr

Clamps for VHF/UHF ANTENNA PVC BOOM

2 différents clamps for VHF/UHF ANTENNA PVC BOOM. First fixed element clamp. second element tiltable at 90deg. The element comes into force in the clamp. The element clips onto the boom. See the video to remove it. 04mm for éléments and…

Downloads
240
Likes
37
Rating
0
P
PrintablesWesEubanks

Meshtastic UHF HT. Heltec V3 Baofeng BF888S.

Parts Needed: - Baofeng BF888S UHF HT - Heltec V3 - M3 x 30mm Allen screws and nuts - Some soldering required

Downloads
224
Likes
47
Rating
0
P
PrintablesIvan Klas

Stealthburner KNOMI HEX UHF Rapido Face

Mod for Rapido UHF with Knomi and HEX design face. No need of MMU, just 2 colour swaps.

Downloads
223
Likes
29
Rating
0
P
Printables3DWolf

Knomi 1.1 + Dragon UHF Stealthburner

Assembly: just like the stock Stealthburner follow the Voron-Manual Printing: Recommended Voron Print-Settings Credit to @DavidC_435875 Huge thanks to David for fixing the STL for Cura slicer, i wasn't aware that there is an issue with it…

Downloads
216
Likes
28
Rating
5
P
PrintablesJohn Chatham

Stealthburner CPAP / Knomi 2 / SB2209 or SB2240 / 3DO Nozzle Cam / Rapido UHF

Really just adding Knomi 2 support to @seage's work and remixes. You will need to download the CPAP connector from Seage's model. Will need to download the Knomi 2 mounting plate from the Knomi 2 github repo: found here:…

Downloads
212
Likes
41
Rating
0
P
PrintablesTijmenbo

stealthburner Rapido v2 UHF ERCF Filament cutter

stealth burner Rapido v2 UHF ERCF Filament cutter with longer ducts

Downloads
196
Likes
31
Rating
0
P
PrintablesSorin Badea

UHF/PL239/PL259 screwable caps

Screwable caps for UHF type connectors according to 5/8 - 24 UNEF

Downloads
180
Likes
17
Rating
5
P
Printablesetotheipi

Dragon UHF EVA3 adapter (heatset) - Remix with space for heater cable

It takes a scavenger hunt to find an acceptable DragonUHF adapter for EVA3. And the one I found has cable-routing issues. I modified it to give extra space for the heater cable to come out the side. It's still not perfect but it's good…

Downloads
172
Likes
10
Rating
5
P
PrintablesGcodeGearHead

XOL - Metrix UHF - SV08

Welcome to XOL-Metrix UHF for the SV08 ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forward…

Downloads
168
Likes
63
Rating
5
P
PrintablesMatvei

Mantis toolhead Dragon/Rapido UHF neopixel ducts

Modified crazy ducts from Mantis github: they are 8.5mm lower to accommodate Dragon/Rapido UHF and added mounts for neopixels. Rest of the toolhead can be found here:…

Downloads
166
Likes
31
Rating
0
P
PrintablesBaze

Stealthburner + KNOMI v2 + 3DO Nozzle Camera + Rapido UHF

Remixed version of Panzarkatten's HEX Remix mod of 3DO Nozzle camera mount for Voron Stealthburner UHF Version and Big Tree Tech's KNOMI v2 Stealthburner face plate. Step file has 18 non-manifold edges, but prints ok.

Downloads
164
Likes
13
Rating
0
P
PrintablesWingmanImd

Orbiter 2 adapter for Mantis + Rapido HF/UHF

This is a wip mod, and it's currently used just on my printer. Consider it as a prototype! I recently received an Orbiter 2 extruder and wanted to use it with my Mantis CPAP and Rapido UHF setup. So I modified the LGX Lite mount to be…

Downloads
162
Likes
12
Rating
5
P
Printables_rob_

Dragon UHF Mount for Stealthburner (TAP Fix)

This fixes the dragon uhf stealthburner mount to work with Voron TAP. I also fixed the weird geometry in the bottom mounting holes that were causing print issues. This is just the rear piece. You can grab the rest from…

Downloads
159
Likes
17
Rating
5
P
PrintablesLouis Land

Drop Effect/Phaetus neXt-G UHF Stealth Burner Print Head

This is a simple revision to the StealthBurner Print head for Phaetus Rapido 2 to fix the next-G.The neXt-G is the same overall height as the Rapido but does not taper towards the top. I just made the model fit the neXt-G width. This is…

Downloads
157
Likes
22
Rating
0
P
PrintablesR3men

Voron Stealthburner Rapido UHF

It is recommended to use it with the new super powerful D3vil Design Typhoon 5015 fan : https://www.aliexpress.com/item/3256808498095211.html

Downloads
153
Likes
22
Rating
0
P
PrintablesYathani

EVA 3 Beacon Probe UHF / Volcano Ducts (Heat insert)

EVA 3 Beacon Probe UHF / Volcano Ducts (Heat insert).

Downloads
149
Likes
25
Rating
5
P
PrintablesHjort Creations

EVA 3 Beacon Rev H - UHF Volcano Ducts

Overview This remix of the EVA 3 Beacon Probe UHF Volcano Ducts is designed to be compatible with the latest Beacon3D Rev H, a high-performance 3D printer component that enhances precision and efficiency in the printing process. By…

Downloads
149
Likes
12
Rating
5
P
PrintablesSpiceWeasel

Toyota Hilux N80 UHF Radio Microphone Dash Mount

Toyota Hilux N80 UHF Radio Microphone Dash Mount Keep your UHF radio handset within easy reach with this clean, purpose-built microphone mount designed specifically for the Toyota Hilux N80 (2016–2025). This is a completely original…

Downloads
146
Likes
6
Rating
0
P
PrintablesGabor

VZ-printhead adapted for VCore3 + stock MGN12C + Orbiter 2.0 + Rapido UHF + CPAP

Its a heavily modified version of the ingenious design from Vez3D, exclusively for the VCore3 with the stock MGN12C rail

Downloads
143
Likes
17
Rating
0
P
PrintablesLaChriz

Fanduct Rapido UHF EVA 2.3 System / VzBot

Passend zum EVA-2.3 System Hier wurde der Luftkanal entsprechend angepasst, so dass das Bauteil nun richtig gekühlt wird.

Downloads
136
Likes
11
Rating
0
P
Printableslakai

Cartographer Probe mount for Rapido UHF VORON ChaoticLabs TAP XOL2 Toolhead

Cartographer/Beacon Probe Mount for Rapido UHF for Voron CNC/CL Tap, XOL2 Toolhead

Downloads
133
Likes
16
Rating
0
P
Printablesryzenchr

UHF Stealthburner CPAP Heatset Fix

For the UHF stealthburner cover with CPAP and two piece PCB I loved this original/remixed design that was able to use a 2-part PCB for the CPAP Stealthburner cover but I was unable to fit any heat set insert I had. The cpap hose adapter…

Downloads
131
Likes
20
Rating
0
P
PrintablesGregory Jones

Stealthburner Knomi-2 Body for Dragon UHF

Print using standard Voron printed parts settings.

Downloads
131
Likes
11
Rating
0
P
PrintablesMario

Dragon UHF spacer for Beacon Rev. H X carriage mount

Support is optional on the bridge in the middle (I used it personally). Will require m3x18 screws. Pre tap the holes in the spacer for easiest installation. Tested and working on stealthburner with beacon rev.h and dragon uhf.

Downloads
126
Likes
13
Rating
5
P
Printablesarthur belanger

One piece docks - remix of crabby docks - with UHF variant

works as a drop in replacement for happy crab docks or the frame for the modular docks . you still need to print the rest of the SB docks, can be found here . part can be printed with the front face oriented on the build plate and support…

Downloads
125
Likes
26
Rating
0
P
PrintablesYO3GND

PL259 (UHF male) dustcap

0.15-0.2 to print those threads. Use them to protect outdoor equipment from dew - ie, cable extensions

Downloads
125
Likes
10
Rating
5
P
PrintablesAB Laser CO2

SOVOL SV08 Toolhead RAPIDO UHF AB RIB

sovol sv 08 toolhead Version UHF for RAPIDO

Downloads
125
Likes
14
Rating
0
P
Printablesjphill

Hex Stealthburner + Knomi 2 + 3DO Nozzle Cam + Rapido UHF

Joined Panzarkatten's HEX Remix 3DO UHF with Big Tree Tech's Knomi 2 .

Downloads
124
Likes
10
Rating
0
P
PrintablesTheFuzzyGiggler

Rapido UHF Improved Cooling - Stock Stealthburner Face

This is yet another remix of the Stealthburner Rapido Printhead for the Rapido UHF. The thing that sets this one apart is, rather than extending the printhead as others have done, I reangled the cooling outlets and redid the internal air…

Downloads
121
Likes
29
Rating
0
P
PrintablesN1_3D_Printing

Beacon3D/Cartographer Probe Stealthburner Volcano/UHF Mount MGN12

This is an X carriage mount for Stealthburner for the MGN12 rail in the UHF/Volcano lengt Check your clearance to see if the specified ~2mm height difference to the nozzle fits (may vary depending on the nozzle)

Downloads
119
Likes
17
Rating
5
P

Moxon DVBT-2 / MOXON UHF

DVBT / DVBT2 Antenne. Nur für Private Anwendungen ! Erstellt nach Recherchen im Netz: MOXON UHF / 690 Mhz / Kanal 48 kann bis zu 5dB bringen. Angaben ohne Gewähr. Ich habe Kupfer-Lack-Draht (1,5mm Durchmesser) entsprechend vor gebogen und…

Downloads
116
Likes
8
Rating
0
P
PrintablesAthenaRoberts

DBJ-1 VHF / UHF Ham Radio Antenna Mount

We purchased a a DBJ-1 antenna (https://edsantennas.weebly.com/) for our ham radio a few years ago back. This bracket I designed allows me to mount the antenna to an old TV antenna pole we have at the back of the house. We used a couple…

Downloads
115
Likes
22
Rating
0

Knomi2-Dragon UHF-Stealthburner main body

Printed using the normal Voron settings.

Downloads
113
Likes
6
Rating
0
P
PrintablesPsych0h3ad

EVA3 UHF CR-Touch

Tell me if step is needed

Downloads
112
Likes
8
Rating
0
P
PrintablesYO3GND

SO239 (UHF female) dustcap

0.15-0.2 to print those threads. Use them to protect outdoor equipment from dew. Tri-wing design is made for easy grip on my fingers, scale up or down the top part if it isn't your cup of tea.

Downloads
112
Likes
10
Rating
5
P
Printablessven494

RatRig V-Core 4 Toolhead for Dragon UHF and Orbiter Extruder

It contains the toolhead plate, which should be milled from aluminum, as well as the modified printing part so that the Dragon UHF can be used together with the Beacon Probe. All other printed parts can continue to be used.

Downloads
108
Likes
21
Rating
0
P
PrintablesBuszmen

BIQU Microprobe EVA3 Mount - remix Mosquito & Dragon UHF

Recommended filament: ASA-CF, ASA, ABS. Infill 25-30, 0.2 mm layer.

Downloads
108
Likes
8
Rating
0
P
PrintablesLuboš Novák

VHF/UHF dualband Dipole v2

Přináším další verzi VHF UHF dipól antény vyrobenou Z prvků staré TV antény. Průměr prvků je 6 mm. Délka pro 2 m (170 MHz) je 2x 39,5 cm, pro pásmo 70 cm (445MHz) je 1x 29 cm, samozřejmě lze naladit změnou délky pro požadované frekvence.…

Downloads
105
Likes
19
Rating
0
P
PrintablesRen

Voron 2.4 Dragon UHF AB toolhead

This is altered original toolhead part for Afterburner to use Phaetus Dragon UHF hotend, couldn't find one when I was building some in 2022…

Downloads
105
Likes
8
Rating
0
P
Printablesbrokenminded

Ultralight Stealthburner CPAP Orbiter UHF

I remixed Datura's CPAP Stealthburner to make it work for my Orbiter 2.0 (just a little cut-out for the filament latch) and my Rapido UHF. Two versions are existing - one with the original SB size and one matched to the UHF.

Downloads
105
Likes
13
Rating
0
P
PrintablesMiaoucat

UHF Yagi-Uda antenna from fiberglass rod 8mm

this is a part kit to make an Antenna from : 8mm fiberglass rod plastic screws tape measure BNC connector 10cm of wire NOTE: gamma match not pictured the “pistol grip” was modified from another user design, here is the original:…

Downloads
104
Likes
16
Rating
0
P
Printableskiwi0401

Mantis-Style Phaetus APUS + Rapido UHF toolhead for Voron 2.4 - Carbon Fiber Gantry w/ toolhead PCB or STOCK

The reason I made this toolhead was to take advantage of Phaetus's hotend attachment for their APUS extruder, and more importantly I just like how the wheel spinning on the apus looks. Fusion files can be found here:…

Downloads
103
Likes
32
Rating
0
P
PrintablesBaptiste31

VORON SB UHF Cpap Stripes faces Rapido-v2

SB-UHF (long version!) I share my toolhead because I was asked for it, I specify that I did not create the models and I do not wish to appropriate their design, it is an assembly of parts that I researched and that I have modified to…

Downloads
103
Likes
18
Rating
0
P
PrintablesWingmanImd

Voron Mantis Beacon - Rapido UHF

This currently only works for the Rapido UHF but if anyone needs it for another hotend leave a comment and I will try to add that too. I also added the STEP file in case you want to modify it yourself. The Y Offset is 22.6mm. Notes: Use…

Downloads
102
Likes
10
Rating
0
P
PrintablesFailerko

E3 NG v1.2 Xol carriage with Beacon mount version for UHF ducts

I have modified the original NG X carriage to mount the Xol toolhead while not losing any X or Y build volume and be as close as possible to the stock toolhead in terms of reach allowing (hopefully) full compatibility with tools mounted…

Downloads
100
Likes
19
Rating
0
P
PrintablesIsawen

XOL BTT EDDY Mount Compatible With Stock XY Endstops For Rapido UHF

This is a modified mount designed to let you use the stock Voron 2.4 XY endstop locations with the XOL toolhead. It’s based on the BTT Eddy UHF sensor mount for XOL, but enlarged to ensure proper alignment and contact with the stock X…

Downloads
98
Likes
8
Rating
0
P
PrintablesN1_3D_Printing

SB-KNOMI-SB2209/2040-UHF-LGX_lite

SB-KNOMI-SB2209/2040-UHF-LGX_lite (Yess i had a bit of Ringing)

Downloads
96
Likes
19
Rating
0
P
PrintablesJamin Collins

EVA 3 Beacon revH UHF/Volcano

EVA3 UHF Volcano ducting for the Beacon revH probe.

Downloads
95
Likes
11
Rating
0
P
Printablessquirrelf3d

Fokoos Odin5-F3 - Custom Shroud - 5015 Fan - Dragon UHF - Orbiter 2.0 / NF Cannon Extruder

WARNING: The ribbon cables on the fokoos odin are dangerous, and not meant to be use on motion area. The ends of the ribbon can easily "unglue" and overlap the next one, and the way they designed it can create a short (there should have…

Downloads
94
Likes
24
Rating
0
P
Printableseatsleepcode

Stealthburner Eddy Adjustable Side mount (works with UHF hotend)

Mount the Btt Eddy on the inside, see the picture for reference. Adjustable - works event for UHF mounts! The thickness of the case is around 1.2mm, and the best results are when it's mounted at 2.95mm. If mounting with the case, try…

Downloads
90
Likes
11
Rating
0
P
Printablesdriftrotor

StealthBurner cowling for KNOMI 2 With Rapido UHF Kumiko

StealthBurner cowling for KNOMI 2 With Rapido UHF Kumiko This Fancy Kumiko SB Cowling was a special ask from a fellow Voron member and took quite a few hours to get the Kumiko pattern to follow the contours of the SB. But the hard work…

Downloads
89
Likes
14
Rating
0
P
PrintablesLuboš Novák

VHF/UHF dualband Dipole

2mm wire 4x M3 screw Pro výpočet délky drátu použij dipol kalkulačku z internetu. Za pomocí analizeru doladit na požadované frekvence. To calculate the length of the wire, use the dipole calculator from the Internet. Tune to the desired…

Downloads
88
Likes
18
Rating
0
P
PrintablesDarrel Farr

Stealthburner Red Lizard K1-UHF Filametrix

Remix of K1-UHF mount for Filametrix

Downloads
88
Likes
8
Rating
0
P

Stealthburner LGX lite Rapido UHF Mellow SB2040

Since I'm running Rapido UHF, I remixed the original part of MLoeko The UHF part is based on the work of bythorsthunder: https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf

Downloads
87
Likes
11
Rating
0
P
PrintablesBrunoCRO

EVA 3 Beacon3D Probe UHF / Volcano Duct

I found one model that was close to what I needed but lacking few things to be perfect. When I imported it in 3D modeling software, I noticed that Z offset from nozzle is out of recommended distance, there was wrong model of Rapido…

Downloads
85
Likes
16
Rating
0
P
PrintablesBackYarder

Stealthburner MGN12 X Carriage Rapido UHF lowered probe

Stealthburner x carraige with lowered probe suit Rapido UHF and Omron or Eddy probe. Larger hole for x stop wiring/plug.

Downloads
83
Likes
3
Rating
0
P
PrintableszGHLooL

klicky Stealthburner longer mount for RapidoUHF

i have a klickyNG probe and ,recently installed Rapido UHF hot end which has a longer nozzle than most hotend out there. use voron recommended specs to print the mount. ABS+ I recommended

Downloads
78
Likes
8
Rating
0
P
Printablesjornamon

EVA3 SuperPinda mount for Rapido SUHF configuration

When using a Mellow V6 Pro adapter ( https://www.aliexpress.us/item/3256804525082538.html ), the tip of the nozzle goes even lower than with the Rapido UHF configuration. The original EVA3 probe mount barely catches the probe in the…

Downloads
74
Likes
10
Rating
0
P
PrintablesLAYDN

Ugly Ender 3 ToolHead - Support for Rapido UHF Hotend (MGN12C)

Modified some files to accomodate the Phaetus Rapido UHF Hotend.

Downloads
72
Likes
11
Rating
0
P
PrintablesOldCoder

Side rails for old Yaesu FT-100 HF Radio (NOT FTM-100 UHF/VHF)

Side rails for old Yaesu FT-100 mobile HF/VHF/UHF Radio. NOT for modern FTM-100 UHF/VHF mobile radio. Side rails are 8mm thick. They are tall enough to leave an air gap under the radio. Printed with PETG, 20% infill, on Prusa MK2. Used…

Downloads
71
Likes
7
Rating
0

Ender 3 Rapido UHF Mount & Duct - Orbiter 2.0, Beacon D Probe

I saw the STEP files and made them to be 3D-printed with PETG.

Downloads
71
Likes
15
Rating
5
P
PrintablesClock_Watchdog

BLV Cube Carriage (EVA Based) for Volcano, Rapido (not UHF) or Similar

This mod is based on EVA 2.4, it uses the rear from EVA but has the front and the other parts heavly reworked. I made this mod to have a sturdy hotend lock, without hard overhangs, becouse i needed to print in PA-CF. You will need 4 x M3…

Downloads
66
Likes
9
Rating
5
P
PrintablesNozzle Wizard

MGN12 X-Carriage for Rapido PLUS 2 UHF EDDY / PROBE Lowering Mount

Lowers the probe on the MGN12 x-carriage to suit the Rapido Plus 2 UHF length. The lower clamping nut and bolt have had to be relocated and you will need a shorter self tapping screw on one of the endstop switches. Apart from that, this…

Downloads
65
Likes
8
Rating
5
P
PrintablesGIZLO3

Ender 7 Dragon UHF Sherpa MINI mount

Dragon UHF hotend + Sherpa MINI mount for Ender 7 To mount it, break out the two upper threaded pins. Here I recorded a flow rate test:

Downloads
65
Likes
10
Rating
0
P
Printablesvrga_of_doom

BTT Eddy mount for E34M1 UHF hotends

added a bit of clearance for the bolts on the E34M1 hotend mount, as i had to break off a smidge on my print of the original added the slots for some vertical adjustment Print either as provided with supports, or with the toolhead-side…

Downloads
64
Likes
11
Rating
0
P
PrintablesHorstilon

Beacon Stealthburner mount for UHF Hotend / Volcano

Beacon Stealthburner mount, accommodates the longer volcano nozzle of Ultra High Flowrate hotends (eg. Rapido UHF)

Downloads
64
Likes
6
Rating
0
P
PrintablesJoshua Y

Eddy Coil EVA E34M1 Dragon UHF Mount

I ran into the problem that the ABL mount designed by Jonspaceharper works great for mounting the eddy coil with none UHF hotends. The distance from the bed was to large to be effective when running the Dragon UHF hotend. This was modeled…

Downloads
62
Likes
10
Rating
5
P
PrintablesB A

Cartographer V4 XOL/A4 UHF mount

Modified Beacon RevH UHF mount for Cartographer V4 compatibility. The mounting point is shortened to clear electronic components on the Carto v4 PCB that would otherwise interfere with the original mount design. Perfect for Xol/A4T…

Downloads
62
Likes
7
Rating
0
P
PrintablesJim

Gridfinity UHF Connector Caddy

This 1x3x3U Gridfinity block has a place for PL-259 and S0-259 connectors, and keeps them handy when testing a Ham or CB Radio.

Downloads
61
Likes
10
Rating
0
P
PrintablesMiklas

StealthBurner_KNOMIv2_3DOv2_UHF_CPAP_LED

Discover the Ultimate Stealthburner UHF! Are you searching for a Stealthburner UHF that perfectly integrates with your Rapido 2 setup and has room for everything you need—like the 3DO-Nozzle Cam V2 with LED, CPAP, Knomi V2, and of course,…

Downloads
60
Likes
16
Rating
0
P
PrintablesAsono

Nozzle ADXL for Rapido UHF

the original didn't have room for the UHF adaptor. I modified the step file to mimic the UFH adaptor

Downloads
60
Likes
7
Rating
5
P
Printablesfryc88

XOL Toolhead 3DO nozzlecam mount for UHF hotends

Hi, Before I switched over to XOL, I was using nozzlecam in SB and I was more than happy with it, so wanted to keep that feature with XOL, however haven't found ready made mounts. My CAD skills aren't great, but it fits & works. All is…

Downloads
59
Likes
18
Rating
0
P
PrintablesArchimedesMP

Voron Beacon/Cartographer Mount for Dragon UHF (& similiar)

Remember to leave a make :) For your convenience, I created a set of distances from 13.50mm to 17mm in 0.5mm steps. To figure out which one you need: Measure nozzle distance to X-carriage bottom. You want 2.6mm to 3mm spacing from the…

Downloads
59
Likes
9
Rating
0
P
PrintablesTopdog

Stealthchanger anthead uhf dock and ducts

works well for my rapdio 2 plus uhf

Downloads
58
Likes
8
Rating
0
P
PrintablescaeserIII

Suzuki Jimny JB43 UHF Radio Mount - Oricom UHF310

Need to find a place to mount your UHF radio? Why not replace the unused and ugly ash tray down the bottom of your center console. This model attaches to the Oricom UHF310 Micro 5 watt radio, and has angled cleats to attach to a printed “…

Downloads
58
Likes
7
Rating
0
P
PrintablesLinas LY2H

VHF/UHF J-Pole antenna parts

The J-Pole antenna 3-D printed parts are comprised of the Bottom Cap (Hub) , Bottom Cap Lid and the End (Top) Cap. These parts are used with the plastic pipe which houses the ribbon-cable made J-Pole antenna. The parts are designed for…

Downloads
58
Likes
11
Rating
0
P
PrintablesWaDMatrix

VW Handschuhfach Handyhalter Samsung KFZ

Beifahrer Handyhalter hier für ein S23 Ultra hoch oder quer

Downloads
57
Likes
5
Rating
0
P
PrintablesPAC

Archetype Small Hotend Core for Medium duct (HF to UHF)

This is not a small size mjolnir, that is impossible due to interference of the xy joint. This is an archetype core for using a small size hotend on a medium size mjolnir. Basically, it can be used with any hotend that uses a combination…

Downloads
56
Likes
19
Rating
0