Search results: v3

Sort order

7,183 models

P
Printablesfifindr

Book Page Holder V3

📖 Book Page Holder V3 – Enhanced comfort with a fully movable thumb ring. This upgraded version of the classic book page holder features a fully rotating inner ring for your thumb, allowing maximum comfort and flexibility while reading.…

Downloads
20,974
Likes
4,058
Rating
4.9
P
PrintablesNora

Ender 3 V3 SE Spine Cable Chain

a spine chain cable for Ender 3 V3 SE Print Settings Printer Brand : Creality Printer : Ender 3 V3 SE Supports : No Layer Height : 0.2mm Infill : 10% Filament : PLA

Downloads
15,444
Likes
1,868
Rating
4.94
P
PrintablesProfessorBoots

3D Printed RC SkidSteer V3.0

Hello this is a fun 3D Printed RC project that's a great way to get hands on experience with standard DIY development electronics. This model specifically is an updated/improved version of the MiniSkidi V2.0 Model. Updates include tracks,…

Downloads
14,081
Likes
3,133
Rating
4.92
P
PrintablesART TOO

BOX OPENER V3.0 - FINAL VERSION - (Tested)

Because of the feedback some of you had, I made this final versions witch is better in pinching tape. As always, if you have any suggestions, just let me know !!

Downloads
9,501
Likes
1,932
Rating
4.85
P
PrintablesVC Design

Cable Zip Tie Mount V3

Update: Stronger, better cable guide, better tolerances

Downloads
7,731
Likes
2,375
Rating
4.98
P
Printablessh

🔐 V3 lock hook Carabiner

Info: v3 remastered version of my previous carabiner model (created after a while of using it) - (it still uses great locking idea from this model - thanks!) so this carabiner has the same locking hook , which does not allow carabin to be…

Downloads
4,855
Likes
465
Rating
4.94
P
Printables3DVJ Models

ChooChoo - A Lightweight/Support Free 4 Tone Train Whistle v3.1

Four-tone train whistle here! This model is composed of two simple parts and are both support free. Included is also a stand to show off your whistle, and you guessed it, it holds both versions! **Stand Update v3.1** - Split stands into…

Downloads
2,934
Likes
838
Rating
4.96
P
Printableschoovick

Orange Pi 5/5B case V3

2023-04-19 V3 - I am pleased to share with you the latest updates for the V3 model of 5/5B variants. Here are the key improvements that have been made: - The annoying PCB clips have been removed. - A clip has been added to the top for…

Downloads
2,709
Likes
142
Rating
4.4
P
PrintablesEdgar.A

Modular hair claw clip V3

Here is a modular hair claw clip with 3 different claw. The system is very simply. Improvement: With V3, you don't need support on the clamp, and you still need it on the clip.(in prusaslicer you should set the overhang threshold to 35…

Downloads
2,583
Likes
579
Rating
2.77
P

DtM-v3.0 Face Shield PPE for COVID-19, Remix of Prusa RC2

The DtM-v3.0 face shield PPE design has been reviewed and approved for use by the USA National Institutes of Health (NIH). See also the design on the NIH website here: https://3dprint.nih.gov/discover/3dpx-013359 Files on this post…

Downloads
2,568
Likes
15
Rating
4.86
P
PrintablesAndroid Ayyteen

V3 Lack Drawers

V3 Lack drawers. Original Design by: https://www.instagram.com/solidworksmaker

Downloads
2,318
Likes
620
Rating
4.81
P
PrintablesRui do Carmo

SquashBall MK3s/MK3s+/MK4 Vibration Damper V3.0

Update 2023: Check version 4.0 of this design here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Version 3 of my old Design:…

Downloads
2,260
Likes
585
Rating
4.88
P
PrintablesLupo Solitari

Artemis/SPA CP2 Rifle Stock v3

English version follows. Stavebnice modulární pažby pro vzduchovky Artemis (SPA/SMK) CP-2 a CP-1 (též Diana Chaser, Bandit). Oproti originálu nabízí (subjektivně) lepší ergonomii, nastavitelnou a vyměnitelnou pistolovou rukojeť, lícnici a…

Downloads
1,940
Likes
198
Rating
4.75
P
PrintablesRC_3DWorks

Universal wall mount - rotatable - V3

The disk inside can rotate in 45° increments for maximum hanging options. This version is uses less material and is a little slimmer

Downloads
1,847
Likes
1,095
Rating
5
P
PrintablesForrest O.

Ender 3 V3 SE Lighter Fan Shrouds

3rd photo shows how it should be laid out. Takes similar inspiration from another shroud , but is designed around the shroud being remixed. Supports aren't needed, but it may look nicer if printed with ironed supports. If you're looking…

Downloads
1,667
Likes
153
Rating
4.82
P
Printableshtkoca

Redux Bambu Lab Silica Gel Desiccant Tray - For New AMS v3

Remixed with bottom chamfers for better bed adhesion. No supports needed Fits new AMS ribs. Use a rubber band to hold the sides together Original model by @muddtt had fillets, which was a pain to print with ABS and other materials…

Downloads
1,579
Likes
127
Rating
4.91
P
PrintablesmisterT

MasterSpool - DAS FILAMENT Edition V3 - Optimized Print

Important Update 2025/2026 Das Filament changed from 800 g to 1 kg. The old Masterspool is no longer compatibel with the 1kg spools. The NEW Das Filament1 kg Masterspool:…

Downloads
1,443
Likes
135
Rating
4.88
P
Printables3DPrintM.D.

Simple Universal Filament Clip V3

Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design, and now dual sided to allow for even easier use. Version 2, added on May 4, 2021, incorporates a…

Downloads
1,385
Likes
240
Rating
4.83
P
PrintablesLucas Ribeiro

4010 fan adapter ender 3 v3 se

V2 of this project comming soon. New version of is model avaliable here. The printer get way quieter after the change, the best mod I did on my Ender 3 You will need 2 M3 screws and a 4010 fan, of course. If you like this model check out…

Downloads
1,308
Likes
167
Rating
5
P
PrintablesLine Arc Line

Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]

This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…

Downloads
962
Likes
173
Rating
4.77
P
PrintablesAWSW

WordClock 16x8 LED matrix (2023-V3)

BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…

Downloads
876
Likes
214
Rating
4.96
P
PrintablesLucky

Grille aération pour tuyau P.V.C 100 mm V3- Ventilation grid for 100 mm P.V.C pipe

Grille aération pour tuyau P.V.C1 00 mm. Diamètre de la grille 93 mm Ext pour vide sanitaire ou autres.

Downloads
779
Likes
63
Rating
4.67
P
PrintablesHasenpups

Amazon Echo Dot V3 - Socket Mount

I did like the original design, but I did not like the support in between. Now there is a two part version which prints with minimal support or even without. Just screw the two parts together with M3 screws and M3x5mm brass inserts. I…

Downloads
732
Likes
126
Rating
4.77
P
PrintablesAndreas Otto

Ender-3 V3 SE Ball Joint Filament Guide Shorter 1-piece print

Printed in PLA Plus, .2mm layer height and organic supports

Downloads
686
Likes
59
Rating
5
P
PrintablesMarkus Lang

D1 mini v3.0 reed sensor case for a BK-G4 gas meter

This is a mashup of the following two models to be able to mount a D1 mini v3.0 together with a reed sensor onto a BK-G4 gas meter: https://www.printables.com/model/111029-d1-mini-v3-snapcase-low-profile…

Downloads
643
Likes
31
Rating
5
P
PrintablesElectricalBoy

Ender 3 V3 SE Heat Bed Cable Chain Mount

After creating https://www.printables.com/model/717326, I wanted the chain to have a tighter curve as I lacked space behind the printer. Then I found https://www.printables.com/model/717488 which seemingly has a tighter curve. Since I…

Downloads
608
Likes
135
Rating
4.88
P
PrintablesUrsaMajor303

TYT MD-UV390 MD-390 PTT/Knob Guards

Updated model for the Knob Guards: Posted a new model. https://www.printables.com/model/923894-tyt-md-uv390-md-390-knob-guards-revised Updated model for the PTT Guard: V1.15 Added to files in this model. I tinkered with the design to make…

Downloads
574
Likes
12
Rating
0
P
PrintablesInnesPort

Focus Knob for Wyze Cam V3

The Wyze Cam V3 is an excellent, affordable little camera to monitor your printer, but it has one fatal flaw... focus distance! The camera comes with a fixed focus that's approximately 3 feet to infinity, which makes monitoring 3D prints…

Downloads
571
Likes
96
Rating
4.88
P
PrintablesSusanov

PLA/PETG Temperature towers + GCODE for Ender 3 V3 SE

Temperature tower for PLA and PETG including the ready made G-codes for the Ender 3 V3 SE.

Downloads
475
Likes
11
Rating
0
P
PrintablesChris Borge

Plastic Bottle Cordage Maker (v3)

Version 3 of my bottle cordage maker. I made a version 2 then realised that both versions 1 and 2 sucked so made a version 3. More info in video: https://youtu.be/ZrLhaQKYRrs The purpose of the tool is to shred plastic bottles into…

Downloads
448
Likes
174
Rating
5
P
PrintablesDaHouzKat

Advanced Filtration System Adjustable Exhaust (v3) for the Original Prusa Enclosure

Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure Features Easy to print and to assemble All the printed parts…

Downloads
433
Likes
209
Rating
4.89
P
PrintablesTeo_211

M1A2 SEPv3 Abrams Wall Art

If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211

Downloads
413
Likes
91
Rating
5
P
Printablesrorys3D

Tripod adapter for Peak Design plate v3

Tripod adapter for Peak Design plate v3 has integrated latch and easily accessible eject button on compliant lever. The adapter has standard ¼" (6,35mm) threaded hole for tripod mounting. There is also screw mount adapter in the files…

Downloads
363
Likes
112
Rating
4.7
P
PrintablesSweden3dp

The best ender 3 v3 se Toolholder

This model is made to hold every single tool and item you got with the purchase of your ender 3 v3 se, but since most of us also expand our toolkits elsewhere, I wanted to make this toolholder customizable and versatile. There are premade…

Downloads
345
Likes
97
Rating
5
P
PrintablesPsíček Czech

Razer Ornata V3 Keycap

Keycap for Razer Ornata V3. Print in 0,1mm, organic supports, 45° for stronger print.

Downloads
329
Likes
8
Rating
0

LowRider v3 CNC - KINEMATIC Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc (v4.1)

HEADS UP: A new version compatible with LowRider v4 is now available. Get it here . Here's a helpful video I made about this: This is an adaptation of a Maxwell Kinematic coupling . You can read about that here:…

Downloads
316
Likes
54
Rating
5
P
PrintablesLucas Ribeiro

Light Mount Ender 3 V3 SE

This is a remix of a very nice comcept of a lightbar that moves with the Z axis. If you like my model, please consider -> https://buymeacoffee.com/teacherribeiro If you like my model cheCk my 4010 mount for ender 3 V3 SE Printing…

Downloads
310
Likes
85
Rating
4.67
P
PrintablesJuradoox

Temperature Calibration Tower for PLA (190 °C – 230 °C) – Creality Ender-3 V3 SE

PLA Temperature Calibration Tower (190 °C – 230 °C) – Creality Ender-3 V3 SE This is a ready-to-print temperature calibration tower for PLA filament , designed specifically for the Creality Ender-3 V3 SE . The model helps you determine…

Downloads
269
Likes
22
Rating
5
P
PrintablesMario

Face shield v3.2 1h23m/shield 2x4-stacks modified settings

I had a lot of issues with the prusa original files&settings on my MK3s printers - perimeters did not stick, so lots of stringing on the inside for example. I modified my settings according to tips from Stefan of CNCKitchen and now print…

Downloads
257
Likes
0
Rating
1
P
PrintablesLucianociri

Despolvillador yerba mate [v3.1] (Dust yerba mate remover)

Este es un rediseño de un despolvillador de yerba mate basado en su modelo original. El objetivo de esta versión es mejorar la eficiencia del filtrado y la funcionalidad general del accesorio: 🧉 Mejoras principales: Distribución…

Downloads
253
Likes
18
Rating
0
P
PrintablesfreakyDude

Cam Mount V3 Artillery Sidewinder X2 (X1)

Clamp or screw you webcam on it, clamp it below your front right printer feet. Versions V3.2 13 cm height 1 cm extra bed distance 33 degree smoothed edges V3 12 cm height 45 degree ¼" screw hole Easy to print, no supports, I used 15%…

Downloads
245
Likes
44
Rating
5
P
PrintablesBTuck

Filament spool desiccant cylinder V3

I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop at for each one.…

Downloads
243
Likes
24
Rating
4.86
P
PrintablesElectricalBoy

Ender 3 V3 SE Bed Spine Chain Mount

Building on top of Yankeespitfire 's bed chain , this model directly replaces the black plastic cable holder for the bed with the chain end. Chain pieces can get directly attached to this piece. This model only includes the replacement…

Downloads
233
Likes
45
Rating
5
P
PrintablesJeepingJohnny

Prusa MK3S Ultimate ToolBox V3! Bigger and Better!

Bigger and Better. There is room for even more tools now! It can handle anything you can toss into it! Lots of improvements on the model. ENJOY! The back dump basket is bigger, improved clip for the frame (doesn't sag), with and without…

Downloads
228
Likes
47
Rating
4.4
P
Printablesgrtych

V3 KE Nebula Pad Relocation - Extra Stiff Support

The mount is stiffer - the pins that the screen slides onto are still not sized correctly (need to be shorter and wider) so the screen is a bit loose on the mount. I fixed this quick by putting a few pieces of thin foam tape on the screen…

Downloads
223
Likes
24
Rating
0
P
PrintablesUrsaMajor303

TYT MD-UV390 MD-390 Knob Guards (Revised)

Just a simple collar that is redesigned from the previous model. Version 1 of the redesign is meant to be printed in TPU and it slides overtop the knobs. It is crude but works. Version 3.5 is a bit more detailed. It was meant to be…

Downloads
203
Likes
8
Rating
5

Ender 3 V3 SE Extruder Rotor Visualizer

This lightweight rotor-style visualizer mounts onto the shaft of the Ender 3 V3 SE's silver extruder stepper motor. Designed for effortless visual monitoring, it rotates as the extruder motor turns, clearly indicating direction and speed…

Downloads
187
Likes
22
Rating
3.33
P
PrintablesTJL

Square Storing Tray v3 & v4 (Vase Mode)

Square Sorting Tray v3 & v4 (Vase Mode) This Sorting Tray uses a minimal amount of material and can be reduced in scale if desired. It was inspired by one of my pervious models “ Paperclip Container & Cover ”, “ Octagon Sorting Tray (Vase…

Downloads
183
Likes
65
Rating
4.75
P
PrintablesEnderPrints

Ender 3 V3 SE side mount filiment guide

Side mount for Ender 3 V3 SE Reduces shake due to spool placement

Downloads
175
Likes
17
Rating
0
P
PrintablesAncistrus CZ

Levý Ventilátor 4010 Ender3 V3 SE / Left Fan 4010 Ender3 V3 SE

Spodní část ventilátoru se zasune a není potřeba šroubu. Horní jsem provrtal a stačí jen jeden šroub. Na montáž držáku se použije šroub z tiskárny který zbyl.. The bottom of the fan slides in and no screw is needed. I drilled the top one…

Downloads
169
Likes
14
Rating
5
P
PrintablesJon R

Wyze Cam V3 Pro replacement swivel

Replacement part for the Wyze V3 pro. Might work for other models Wyze cams This is not intended to be a exact replacement for the original, but it is functionally the same.

Downloads
167
Likes
13
Rating
5
P
PrintablesoXiVanisher

Color Dropper Bottle Rack V3

Horizontally standing, stackable color dropper bottle rack for 14 (two rows of seven) Vallejo, Army Painter, … colors, primers, washes… It is designed to use space as efficient as possible, so that we can get more paints. 😉 The shroud was…

Downloads
165
Likes
30
Rating
5
P
PrintablesShannon

Arduino Project Motor Boat V3.

This is the final prototype for the Arduino RC boat project. This boat has slots in the aft section for a micro electric motor and two 9v batteries. The aft cover is designed for use with a micro servo. The Arduino will control the motor…

Downloads
164
Likes
15
Rating
0
P
PrintablesNicolas ⚡️

Stand for Apple Mag Safe V3

I recommend printing the Base with 100% infill for more weight. Perfect as a Phone Holder in your Workshop, Kitchen, Bathroom or Bedside Table.

Downloads
162
Likes
16
Rating
5
P
PrintablesGuimz

LGA 2011 V3 CPU Fitted Case

I resized the model to fit intel Xeon socket LGA 2011 v3 You just have to slide a piece of 1.75mm filament into the holes in the hinges. Print without supports for better results. Thanks ! - Guimz

Downloads
160
Likes
7
Rating
5
P
PrintablesBernd

6-fach o. 12-fach Bithalter für Bosch Professional Akkuschrauber GSR12V35FC

Gedruckt mit Prusamet PETG, 0.2mm Schichthöhe, Stützen nur auf dem Druckbett, 3 vertikale Konturhüllen, 25% Füllung

Downloads
156
Likes
32
Rating
5
P
PrintablesAlly the Sentry

80MM PC Fan Mod for Ender 3 V3 SE

BoM: 4 - M3 Screws ≥ 6.5mm long 4 - Washers (Optional) 1 - 80mm x 25mm 24VDC fan (12VDC works ok if you already have one) Ability to solder 2 small wires together (or simply join them securely) --- Difficulty: 4/10 Risk: 8/10 ---…

Downloads
156
Likes
45
Rating
5
P
Printablesfonzy

Z belt tensioner w. filament sensor bracket Ender 3 V3 KE

Movable z axis belt tensioner added bracket for filament sensor for Ender 3 V3 KE original screws can be used - cannot be used together with the original spool holder!!! Required parts: 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings 2 parts -…

Downloads
151
Likes
49
Rating
3
P
PrintablesRealgeizt

MGN12C X-axis adapter for Ender 3 V3 se

For mounting the hotend on an MGN12C linear rail on the X-axis Creality Ender 3 V3 se Zur Montage des Hotends auf einer MGN12C Linearschiene auf der X-achse Creality Ender 3 V3 se

Downloads
134
Likes
15
Rating
0
P
PrintablesDiego F2M

(INSIDE FRONT FEETS)SquashBall MK3s/MK3s+ Vibration Damper V3.0 (for toolbox version)

if you love like me the Vibration damper system from Rui Carmo ( https://www.prusaprinters.org/fr/prints/59947-new-version-squashball-mk3smk3s-vibration-damper-v ) and if you also love the Side drawers from djedje_zr7 (…

Downloads
129
Likes
27
Rating
5
P
Printables5limpickle

Ender 5 Plus TFT35 V3.0.1 Screen Mount

I remixed @Si_Gowla design with tighter tolerances and more attractive aesthetics. It allows quick access to the back of the TFT35 main board. No case mods needed. Filament: PLA Layer height: 0.2mm (knob shroud 0.1mm) Infill: Grid 15%…

Downloads
104
Likes
6
Rating
0
P
PrintablesTARUN SURYA

pen ploter with ender v3 se/ke

This is a attachment that turns your ender 3 v3 se/ke into a pen plotter. It clips on to the side of the extruder and requires no disassembly of the printer toolhead. It's fairly rigid and can plot fine details (e.g. printed text) with a…

Downloads
99
Likes
5
Rating
0

Snap-On Decorative Stepper Motor Cover for Ender 3 V3 SE (Silver Motor Version)

This is a stylish, 3D-printed decorative cover designed specifically for the extruder stepper motor of the Ender 3 V3 SE equipped with a silver motor. The model features a bold design with customizable front panel accents, like the red…

Downloads
93
Likes
10
Rating
0
P
Printablesbenjiao

NodeMCU v3 ESP3266 Case with Sensor Slot

A snap-on case for a NodeMCU v3 that has slots for USB charging and sensor wires. Designed to fit DuPont connectors attached to the NodeMCU's pins. This was my first basic case for my DIY Home Assistant setup. I use it hold SHT3x-D…

Downloads
90
Likes
6
Rating
5
P
PrintablesAndré Chaves

Ender 3 V3 KE and SE automatic nozzle cleaning brush PROCEDURE

M220 S100 ;Reset Feedrate M221 S100 ;Reset Flowrate M140 S[bed_temperature_initial_layer_single] ;Set final bed temperature G28 ;Home all axes G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up M104 S[nozzle_temperature_initial_layer]…

Downloads
88
Likes
24
Rating
0
P
PrintablesMi Ku

Ender 3 V3 SE Side Screen Mount NO SUPPORTS

NO SUPPORTS NEEDED A little screen mount for ender 3 v3 se, best if you have limited space (like me) or this would just seem more comfortable. Personally used it since I printed it, it wobbles slightly but doesn't bother me(if any one…

Downloads
85
Likes
16
Rating
0
P
PrintablesTempus

Iwoc Trio Cover Black - Iwoc Trio V3 Remote ANT+ LEV

Printed in PETG, 20% infill, 0.1 mm layer height. I reconstructed the replacement part based on a damaged original part, which is why it is not a perfect 1:1 copy, but it is definitely usable. Please compare the photos.

Downloads
83
Likes
1
Rating
0
P
PrintablesEskol_FJB

Plegable Phone Holder V3

Plegable Cellphone holder Printed in 4 parts, the hinges are fixed by pushing 1.75mm filament through the holes. It's slightly longer than a credit card and 6mm thick. V3: Improoved holles diameter to get better assamble experience with…

Downloads
81
Likes
13
Rating
0
P
Printablesquantenquark

VPM-Lampenhalter_V3

Das vorliegende 3D-Modell wurde speziell für die optimierte Montage der Beleuchtungseinheiten des VPM-Moduls NRW ( Verpflegungsmodule NRW ) entwickelt. Es wurde auf Grundlage der Anforderungen der Einsatzkräfte des Deutschen Roten Kreuzes…

Downloads
74
Likes
4
Rating
0
P
PrintablesStephanie O

EV3 Mindstorm Crate Organizer

Super simple print - 1mm thick boxes that fit nicely in the crate your EV3 set came in. Print 4 of the "corner boxes" and 2 of the "middle boxes" and you'll have a set that looks like the ones in the pictures. They are tall enough to hold…

Downloads
69
Likes
15
Rating
0
P
PrintablesPrince Plastic

[Updated] Wyze v3 Camera Bed Mount for Ender 3 Pro [shorter version]

Kind of a remix, kind of a whole reworking. This brings the camera in 15mm to increase stability, reduce carriage weight, and cut down print time. I printed mine upright with a brim, tree supports, and support blockers for the smaller…

Downloads
69
Likes
12
Rating
0
P
PrintablesHOR

Eachine EV300 D lens protector

Helps to protect FPV goggle lenses. Designed to be compatible even when you use diopter lenses. Print instructions Best material is PETG, because it's has to be flexible a little bit. Fell free to trim-sand top "bumps" which fit into…

Downloads
66
Likes
2
Rating
5
P
PrintablesHatchet

Bugasalt v3 Lamp attachment

This is a Lamp mount for the Bugasalt V3 It clips on the on the mounting porint on top of the gun the lamp is also just slided in. the Diamater for the lamp is 23,5mm. so it should fit all lamps that are slightly bigger then the diameter.…

Downloads
62
Likes
21
Rating
5
P
PrintablesOcelotzlasu

Magnetic Fidget Slider V3

This is my third version of my fidget slider. I started learning Autodesk Inventor and wanted to put what I learned so far to the test. The problem with V2 was that the sliders were jumping out of the base if you'd slide more than one at…

Downloads
58
Likes
13
Rating
5
P
PrintablesXenGi

KBDfans KBD75 v3 case

A simple case and plate for the KBDFans KBD75 v3 PCB. I had a spare PCB, so I made this. The pins align with the PCB screw holes, so there are no screws needed. The two holes are for pushing the PCB out again. I suggest to print the…

Downloads
58
Likes
9
Rating
5
P
Printables3DOM

Dell XPS 9700 (2020) Riser / Ventilation Feet (v3.0)

Introduction Dell XPS 9700 tends to get hot when gaming, wanted some easy to carry feet to improve air circulation when needed. This part elevates the back of the laptop by ~20° I am proud of this simple piece and would appreciate your…

Downloads
58
Likes
11
Rating
4
P
PrintablesAdamStanislav

15 mm Rail to dual NATO Rail Adapter 75 mm, v3

15 mm Rail to dual NATO Rail Adapter 75 mm, v3 The original design of the 15 mm rails to the dual NATO accessory rail adapter works, but is somewhat hard to move on the 15 mm rods. That makes it difficult to slide the adapter to a precise…

Downloads
51
Likes
10
Rating
0
P
Printableskuchar

Prusa CORE One Camera enclosure for Wyze Cam v3

Build your own Buddy3D-like Camera from Wyze Cam V3 for your CORE One. With this enclosure you can build Buddy3D-like camera from Wyze Cam V3. This is somewhat destructive to the Wyze Cam V3, but if you're careful and record the process…

Downloads
50
Likes
23
Rating
5
P
Printablesh2odragon
18+

The source marked this model as adult content.

Downloads
49
Likes
24
Rating
0
P
Printablesgrtych

V3 KE Right Removable Bin - Lower Height

Shortened the height of the removable bin so that Rui's Nebula Cam can still be utilized. Removed the Nebula Cam static mount

Downloads
49
Likes
14
Rating
0
P
PrintablesGrogg3D

Unifi UTR Thermal Spacer Plate (v3)

This is v3 of the model, Ultimate Edition. EVEN more ventilation ability but supports are required . Elevates UTR device by 3 mm to improve passive airflow and reduce heat build-up Ventilated underside design promotes air circulation…

Downloads
48
Likes
2
Rating
5
P
PrintablesJens

WordClock 16x8 LED matrix (2023-V3) - Closed Front

This contains only the German version of the Word Clock but with a closed front, but it's adaptable for other languages if you take a look how I stacked the different colours. I used a darker bronze gold (from Redline Filament) for the…

Downloads
44
Likes
4
Rating
0
P
Printablesmysak85

Xiaomi Mijia Soap mount V3-Final

V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Držák na stěnu pro automatický dávkovač mýdla od Xiaomi.…

Downloads
42
Likes
5
Rating
5
P
PrintablesTadeas Tehan

Enclosure for RPI3B+ with X850 V3.1 SSD

Enclosure for RPI3B+ with X850 V3.1 SSD. Part list 4x M3x30mm

Downloads
41
Likes
6
Rating
5
P
PrintablesMaWoKo_3D_Druck

Stapel Box Easy Schmuck V3

Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…

Downloads
39
Likes
3
Rating
0
P
PrintablesDan H

Mount for Raspberry Pi Cam v3 with HDMI Module

Model Description Mount for a Raspberry Pi Camera Module V3 with HDMI to CSI extension module to be mounted to @Sneaks ' popular articulating cam mount. Parts HDMI to CSI Extension Module Raspberry Pi Camera Module 3 Standard - 12MP…

Downloads
39
Likes
2
Rating
1
P
PrintablesGrogg3D

Unifi UTR Thermal Spacer Plate (v3.1 UGreen Nexode Edition)

This is v3.1 of the model, the UGreen Nexode Batterybank Edition. Superior ventilation ability but supports are required . Elevates UTR device by 3 mm to improve passive airflow and reduce heat build-up Ventilated underside design…

Downloads
37
Likes
4
Rating
0

Holder for lab bottles v3 - Round

Manufacturing procedure: Material: PLA 3D Printer: FDM 3D printer, average print time 5 hours (with Input Shaper on MK4) Slicer settings: 0.2 layer height , divide the model in two parts and use the snap connectors, add support for the…

Downloads
33
Likes
8
Rating
0
P

hygrometer stand creality ender 3 v3 se

Soporte para un termómetro/higrómetro comprado en aliexpres muy barato, se ajusta perfectamente en cualquier parte de la barra superior de la impresora creality ender 3 v3 se. es muy útil y practico y no se queda suelto ni nada, encaja a…

Downloads
27
Likes
7
Rating
0
P
PrintablesBOZ

Fidget Gear Ring V3 – Triple Herringbone Planetary Gear - Anti Stress Ring - 51 Different Sizes

Fidget Gear Ring V3 – Triple Herringbone Planetary Gear 🆕 Update – Ring Release Tool Included Since some users have experienced difficulties loosening the gears after printing, I have created matching two-piece ring clamps for every ring…

Downloads
27
Likes
6
Rating
0
P
PrintablesWitSkapie

Ender3 V3 SE - Heat Gun holder

Glue gun holder, printed on normal PLA. 220C nozzle and 60C bed

Downloads
27
Likes
2
Rating
0
P
PrintablesKVLVX
Downloads
26
Likes
4
Rating
0
P
PrintablesDaniel Vlček

Razer Seiren Mini V3 holder

Razer Seiren Mini V3 Under-Desk/Shelf Mount I designed this mount to free up desk space for my Razer Seiren Mini V3 microphone. Since I’ve extended the microphone stem, the stand was taking up too much room on my desk, so I created a…

Downloads
24
Likes
1
Rating
0
P
PrintablesDaVinci

Seitliche Halterung Filamentsensor für Ender 3 V3 KE

Gedruckt in PLA (0,2mm Speed Profil auf einem MK3S) mit 15% Infill. Benötigt eine Verlängerung des Anschlusses von der Mitte des Druckers zur linken Seite. Verbinder zum Teflon-Schlauch ist ein PC4-M10 Pneumatikverbinder (Bohrung 9mm).

Downloads
24
Likes
1
Rating
0
P
PrintablesSlacker

MK4 Status Bar for HyperPixel 4 Panel - Look for v3

Diffuses the indicator LEDs to make them easy to read. This was adapted to work with the HyperPixel panel. Added a v2 that is thicker and stays mounted better than the first version. Printed in clear PETG but you can use other filaments.

Downloads
22
Likes
5
Rating
0
P
PrintablesJordan Te

Speed Unlock Magnet Mount for Rockrider E-ST V3

This simple 3D print lets you bypass the 25 km/h speed limit on your Rockrider E-ST V3 e-bike. It holds a 20x2 mm magnet on your pedal crank, which tricks the bike's computer so it never cuts the motor power. The Fusion 360 (.f3d) file is…

Downloads
21
Likes
3
Rating
0
P
PrintablesKazuyamano

TissueCase_v3 for PREDUCTS DESK

Keeping the basic structure of version 2, the front is closed to improve the appearance and rigidity.

Downloads
18
Likes
1
Rating
0
P
PrintablesKarel

Climp for RJ45 crimper model TV37

Crimper model: TV37 PLA or PETG, 0.2mm

Downloads
17
Likes
5
Rating
0
P
PrintablesD.Rausch

Door hook v3 (17min)

Printed in Pla+ within 17 Minutes. Perfect for hoodies:)

Downloads
17
Likes
2
Rating
0
P
PrintablesTonitwn

PenClip V3

I like to keep my Frixon pens together with my RocketBook since otherwise they get lost easily. I use a standard hole puncher and use it to make a single hole (s.a. picture), the pen clip closes nicely through this hole which gives it…

Downloads
15
Likes
12
Rating
0