Search results: v6

Sort order

1,991 models

P
Printables3DPreviews

E3D V6 Nozzle Holder - Nozzle Holder - Nozzle Case

Here is my holder for my E3D V6 Nozzles. It is designed so that the nozzles can screw into the casing to keep them nice and secure. This case will also hold and M6x1 nozzles such as clones. Enjoy! Print instructions Print at 0.1mm layer…

Print approx. €1.00–€1.23 excl. taxPreliminary estimate for one variant

Downloads
6,708
Likes
1,289
Rating
4.46
P
PrintablesReven

V6 Nozzle Box

UPDATED May-23: New sturdier hinge design. Details below. I didn't really like any of the boxes or nozzle holders I found. I wanted something minimal, quick to print and tidy. This little box packs up to 15 nozzles closely together,…

Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,862
Likes
287
Rating
4.75
P
PrintablesiMars

Case for SlimmeMeter+ v6

This version has a little wider USB-C opening as sometimes due to different seem setting, it could get quite narrow. Best fit is to print it on 0.2mm. Where 0.3mm gave the case too much wiggling space, and 0.1mm was a very tight fit…

Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant

Downloads
710
Likes
28
Rating
5
P
PrintablesMartinAnthony

Kia EV6 Trash bin

To install the cover on the bin, first put the bigger tab into the hole, then push the smaller one in and it should go easily. Then just superglue the handle onto the cover.

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant

Downloads
447
Likes
70
Rating
4.25
P
PrintablesMultisystem

MiSTer Multisystem V6x 2023 classic gaming console 3D Printed enclosure design

Update to the Multisystem FPGA console enclosure for 2023 - easier for print farm production, quicker using 0.6mm nozzles (recommended) the design is tuned for 0.6mm E3D V6 nozzles on a Prusa i3 MK3/3+/3S+ machine. For construction and…

Print approx. €5.64–€6.90 excl. taxPreliminary estimate for one variant

Downloads
418
Likes
36
Rating
5
P
PrintablesHessenDnD

Propeller protection for underwater drone Fifish V6 and V6S

I made these as I could not find any openly available models. This is a low profile/low drag alternative to the original Qysea Fifish Propeller protector. Example pictures show prints made in draft mode (0.3mm layer height) for rapid…

Print approx. €1.60–€1.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
346
Likes
17
Rating
0
P
PrintablesBilld

Dyson V6 Vacuum to V8 Accessory Adapter

An adapter to use Dyson V8 and later accessories with an older Dyson V6 vacuum cleaner. I printed the final part with a 4mm nozzle, 0.10mm DETAIL profile in Prusa Slicer, just because I wanted a nice, clean finish. All the prototypes were…

Print approx. €4.40–€5.37 excl. taxPreliminary estimate for one variant

Downloads
337
Likes
27
Rating
5
P
PrintablesRatasich

Nozzle Box (for 6 pcs. E3D V6)

Most nozzle boxes are for a high number of nozzles. I don't own that many nozzles (yet), but I liked the design of Julia Ebert's nozzle box. Thanks to the uploaded STEP files, I was able to change the box to fit 6 pieces of E3D V6…

Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant

Downloads
242
Likes
42
Rating
5
P
PrintablesOliverGibson

HW-319B-V6.0 Case

Case for HW 319B V6.0 with countersunk screw holes.

Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant

Downloads
147
Likes
5
Rating
0
P
PrintablesHampusbjork

QYSEA FIFISH V6 Parallel Gripper

Print the parts twice and flip one. Drill the outer round hole with 4mm drill. Use a M3 Threading Taps for the threads. Use a Allen M3 bolt with a appropriate length I also uploaded pictures of the measurements if you want to model…

Print approx. €4.63–€5.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
141
Likes
14
Rating
0
P
PrintablesFatal Error

Dishwasher combclip Bosch SMV68MX04E

Object: combclip for dishwasher Bosch SMV68MX04E. It should works also for rest Bosh dishwasher. Notice: all detail informations, especially supports, you can easy find in 3mf file with project (open as project in slic3r). Printed on…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
125
Likes
16
Rating
0
P
PrintablesOldKingHamlet

Lazy, all-in-one Prusament PETG gcode for Nevermore v6 fan

Just made a one-and-done gcode for lazy people like me who want a Nevermore v6 enclosure fan. Parts you'll have to provide are 2x 2 pin WAGO 221 lever connectors, 2x 5015 blower fans, 2x M3*4*5 heat set inserts, M3 screws (forgot the…

Print approx. €7.72–€9.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
82
Likes
7
Rating
0
P
PrintablesNull6417

phaetus APUS extruder mount for KLEMCO creality v6 mount.

all hardware needed to mount is included in the klemco v6 mount kit a very small PTFE tube spacer is needed, less than 10mm is needed, i dont know the exact length.

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
1
Rating
0
P
PrintablesPascal

Hario V60 Paper Filter Holder Size 01/02

Hario V60 Paper Filter Holder Size 01/02 Coffee Filter Holder

Print approx. €7.50–€9.16 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
3
Rating
5
P
PrintablesOldKingHamlet

Nevermore v6 Fan Mount for Prusa Original Enclosure

Decided to make something that'll hold my Nevermore v6 fan and have the exhaust point away from the print. Needs just 2x M3*4*5 heat set inserts in the arms, appropriate screws for the sides of the Nevermore fan, and mounts to the…

Print approx. €1.66–€2.03 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
11
Rating
0
P
PrintablesMaWoKo_3D_Druck

Stapel Box Easy Schmuck V6 für Halsketten

Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…

Print approx. €3.58–€4.38 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
0
Rating
0
P
PrintablesPrusa Research

Engine Block V6

This is a model of the engine block made for the Original Prusa XL Five-Head.

Downloads
10,927
Likes
2,997
Rating
4.94
P
PrintablesMotani_Works

WORKING V6 ENGINE

Working V6 engine , engine block from @Prusa research, pistons, crankshaft and stand made by me. I made it actually work , can work with a electric motor. or any other motor that can be attached to the crankshaft. The model can also be…

Downloads
6,930
Likes
1,843
Rating
4.65
P
Printablesquibeck

6-chamber whistle guaranteed +122 dB V6 DANGER!!!

This Whistle is built for one purpose: being as loud as possible. Every printed unit is guaranteed to exceed 124 dB , making it one of the loudest whistle designs you can print — well into the range where hearing protection matters. ⚠…

Downloads
3,322
Likes
436
Rating
2.54
P
Printableswhoppingpochard

Hario V60 filter holder

I wanted a little filter holder for my Hario V60 coffee filters, and needed something different from what I could find here. My design criteria: horizontal access to filters (will be located in shelf inside cabinet) slightly angled to…

Downloads
3,201
Likes
379
Rating
4.98
P

Manta Ray Face Shield V6 (Prusa + 3DVerkstan remix)

It's called "Manta Ray" because I asked my kids what it looked like, and Rylee said, "it looks kind of like a manta ray." EDIT 6/19/2020: Added a "mouse ears" version. There are little circles at the ends that help hold it down. EDIT…

Downloads
2,849
Likes
26
Rating
4.83
P
PrintablesPaul C

Ultimate Koozie V6 - Beer Can Holder + Other Accesories

Welcome y'all, I remixed this masterpiece to support larger cans of 0.5 liters, added a neat hook to hold your car keys (don't drink and drive) and a condom holder because you never know when you might need it. Enjoy! Personally I printed…

Downloads
2,328
Likes
143
Rating
5
P
Printables3DP-MAMSIH

EVA 3.0 E3DV6 - REVO - REVO Micro ( Hotends ) Mount

18/08/2022 step file uploaded New face fan cover 13/05/2022 V6/ REVO V6 heat set inserts added 1 st Big Thanks to EVA designer for this big effort and nice design for EVA 3.0 Link to EVA 3.0 HERE ! 2 version Standard E3D V6 / REVO V6…

Downloads
2,294
Likes
180
Rating
4.67
P

Qidi Q2 — Cooling Duct (v5.1 & v6.0 Dual-Flow)

Qidi Q2 — Performance Cooling Duct (v5.1 & v6.0 Dual-Flow) Summary A high-efficiency part cooling shroud for the Qidi Q2 . This duct was precision-engineered using CFD (Computational Fluid Dynamics) to reduce turbulence and provide a…

Downloads
2,226
Likes
468
Rating
4.77
P
Printables3d tisk - Sam
18+

The source marked this model as adult content.

Downloads
2,052
Likes
115
Rating
5
P
PrintablesUniCube3D

V6 Engine Model | Functional Pistons, Valves & Timing Chain

This project is a fully functional V6 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-2-3-4-5-6, Fully printable timing chain, Can be…

Downloads
2,006
Likes
655
Rating
4.67
P

Nevermore V6 Carbon Filter- Easy Lid Remix

I want to thank everyone that contributed to the Nevermore project. It has been a very useful modification to my Voron. The new V6 design offers some nice improvements but I wanted to redesign some of the parts. I remixed the cartridges…

Downloads
1,998
Likes
326
Rating
4.96

Working Mini V6 60° Engine - Built Realistically

The model is 54mm long, 40mm wide and 38mm tall, using 31g of filament. Feel free to scale it up, but I did not test the fittings on a bigger model, so there might be some mistakes. You have to realistically assembly the bottom end of the…

Downloads
1,918
Likes
469
Rating
0
P
PrintablesMax

Dyson V6 hose attachments and nozzles

Hose adapters for the Dyson V6 series. Options are: 1"(25.4mm) to 2"(50.8mm) Nozzle attachments of various sizes and shapes. Wall thickness of 2mm Straight, 30deg, 45deg The V7+ Dyson's have a more complicated connector on the nozzle…

Downloads
1,749
Likes
348
Rating
4.7
P
PrintablesAgustin Arroyo

E3D V6 - Educational Hotend Section

Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- E3D V6 hotend section to show how a hotend…

Downloads
1,655
Likes
431
Rating
4.94
P
PrintablesPlebsoon

creality ender 3 5 e3d v6 hotend cooling and mount bowden

hi, this is my desing of a creality ender 3 cooling&mount for an e3d v6 hotend you will need: 1x 50x50 fan 1x 40x40 fan 11x m3 bolts 3x m3 nuts The hotend can have additional coupler on the top, there is enough space to fit everything you…

Downloads
1,545
Likes
176
Rating
5
P
PrintablesJuanCallon

E3D V6 hotend 1.75mm

As I'm making my own 3D printer, I had to draw my E3D V6 direct extruder for 1.75mm filament, and here it is. Category: 3D Printer Extruders

Downloads
1,537
Likes
34
Rating
5
P
PrintablesBootjevaarder

OHC V60 Ultramax Engine

General A Overhead Camshaft engine is an internal combustion engine with the camshaft placed in the cylinder head. The NSU Ultramax camshaft drive operates with 2 push rods, which rotate on eccentric disks. Details you can find here:…

Downloads
1,444
Likes
1,201
Rating
5
P
PrintablesSunShine

Print In Place V8 and V6 Engines!

note, this used to be the thngiverse file for only the V6, but is now combined to the V8 and the V6. This is a print in place model, meaning there is no assembly required! See how it works: https://youtu.be/n4ovYJdgHNU Please like the…

Downloads
1,422
Likes
166
Rating
4.57
P
PrintablesHerzZorro

REMIX - Anycubic Vyper - Adapter for V6 E3D v.1.0 upgrade

DEUTSCH: Anycubic Vyper - Adapter for V6 E3D v.1.0 upgrade Genervt vom ewigem Nacharbeiten des Adapters von RyanMaverick, habe ich den Adapter nochmal nachgearbeitet und den unnötigen Steg herausgenommen. Nun passt der Adapter ziemlich…

Downloads
1,397
Likes
67
Rating
5
P
PrintablesCrambambuli

Speed Loader for Ruger mark 3 & 4 v6 (old design)

How it works: https://vimeo.com/544208321 This is the 6 version of my speedloader. It has many new features: the cartridges does not fall out when the magazine is not inserted it is suitable for smaller printers there is the possibility…

Downloads
1,390
Likes
195
Rating
4.67
P
PrintablesTom Wilkie

Prusa Mini v6 Hotend Adapter

Remix to: improve airflow reduce mass get rid of the vertical split add extra bolt to really clamp down the hotend

Downloads
1,365
Likes
192
Rating
4.92

Kingroon KP3S 3.0/PRO mod for E3D V6 / Bambu Lab Hotend + 4010 Fan (UPDATED)

Print settings: KP3S V6 Heatsink Cooler.stl - NEEDS SUPPORTS 5015 Fan Holder.stl - NO SUPPORTS KP3S Nozzle 5015 Duct.stl - NO SUPPORTS (print slower - high overhangs) You need to print 3 files for the complete assembly. Variations below.…

Downloads
1,315
Likes
249
Rating
4.93
P
PrintablesStenly_G

Engine block V6 keychain

This engine block model serves as a stylish keychain. 3D printed with attention to detail, it's perfect for car enthusiasts who want to add a technical touch to their keyring. A great accessory that's easy to print If you have an idea for…

Downloads
1,303
Likes
262
Rating
5
P
PrintablesAlexMu

Anycubic i3 mega Hotend fan box (also Mega-S, Mega-X, Full Metal, BLTouch & E3DV6 versions)

Features 26.11.2021 updated added duct with stopper at fan hole 18.2.2021 updated the fan duct for more spacing around the nozzle. BL touch standard parts flow optimised separation of hotend and nozzle coolin I wanted to have an easy…

Downloads
1,235
Likes
120
Rating
4.67
P
Printablesthe freewheeler

E3D V6 Hotend Fan Duct | Prusa MINI X-Carriage Replacement

E3D Fan Duct Replacement Rear-mounted x-carriage replacement fan duct for Prusa Mini/Mini+. Designed to improve part cooling with E3D hotend and heatblock, but will also work with stock hotend assembly. Duct geometry is based on the…

Downloads
1,231
Likes
234
Rating
4.8

Bambu Lab's Hotend adapter to V6 SIZE

This adapter makes Bambu hotend the same length as the V6 hotend at 62.3mm. The main hole is designed for the PTFE tube to be inserted. Ideally, it should be printed from something like CF ABS with a high wall count and maybe even 100%…

Downloads
1,176
Likes
188
Rating
5
P
Printables3DP-MAMSIH

E3D V6 Prusa MINI+/MINI

Simple design for mounting E3D V6 on Prusa Mini with integrated X-Fan shroud can be used with original Fan Print instructions Unassociated tags: prusa mini Category: 3D Printer Parts Summary Simple design for mounting E3D V6 on Prusa Mini…

Downloads
1,100
Likes
184
Rating
4.92
P
PrintablesMeyui

V60 Coffee Paper Filter Stand

V60 Coffee Filter Stand This V60 Coffee Filter Stand is a detachable holder designed specifically for V60 cone filters . With an angled frame , the stand supports the natural curve of the filters, keeping them neat , upright and easy to…

Downloads
1,082
Likes
414
Rating
4.92
P
PrintablesMarvin Smith

Stealthburner E3DV6 Volcano

Thanks to the amazing work from the Voron team! I added a printhead for the Volcano variant of E3DV6. It is a simple extension of the part cooling ducts from the original Voron Stealthburner E3DV6 printhead. Not the nicest looking mod…

Downloads
1,064
Likes
122
Rating
5
P
PrintablesSubtle3D

SLV6 Magazine Speedloader

Speedloader for multiple types of magazines. Print one body then the Insert type/types you need and switch out just the insert. Easy Disassembly. Springloaded. Quick change insert/part replacement. 100% 3D Printed.…

Downloads
1,003
Likes
183
Rating
5
P
PrintablesJer

Voron Stealthburner V6+Volcano Toolhead Extension Mod

A Duct-Extended v6 Printhead for the Stealthburner The Voron Stealthburner toolhead includes a printhead module that is compatible with a standard v6 hotend. In this mod I attempted to replicate bythorsthunder's mod for the Stealthburner…

Downloads
994
Likes
114
Rating
5
P

Engine V6

Engine V6 with support. Need to scale to less than 20% to fit your bed.

Downloads
985
Likes
76
Rating
0
P
PrintablesWICKID

E3D V6 All Metal HotEnd Mount for the Ender 3 / Creality CR-10

I first used the Design parts provided by MatterHackers for the E3D Hotend for Creality CR-10. The issue I had with it was, it required heat set threaded inserts which I did'nt have, Secondly since my Ender 3 does not have any auto bed…

Downloads
978
Likes
69
Rating
3.33
P
PrintablesRH3D

V60 coffee dripper

Slightly modified version of V60 coffee dripper that doesn't need supports (I changed the handle and the bottom part with smaller overhangs and separated rim), you just slide the rim on the body and eventually put glue to the joint if…

Downloads
936
Likes
93
Rating
4.2
P
PrintablesBootjevaarder

V90 8 Cylinder Engine (v60 4 cylinder)

Printing The cylinder head is very detailed and could cause problems on some printers. In that case please use the “simplified” version of the cylinder head. The Cylinder Head is printed with support. Beware of seams on axles and…

Downloads
915
Likes
485
Rating
5
P
PrintablesLH

Rogue Orbiter - V6 Orbiter 2 Tool Head - Ender 3 V2 Neo

Rogue Orbiter Tool Head design for the Ender 3 V2 Neo based on the E3D V6 mount (Revo Six, Dragon SF, HF, Dragonfly BMO) and the Orbiter v2.0 extruder. Battle tested and heavily iterated. This is my sixth complete Tool Head design for the…

Downloads
904
Likes
288
Rating
5
P
Printablesasteven5

Nozzle Storage Box (V6)

A simple box with a slip on lid for storing V6 nozzles. Print instructions No supports required. Lid should be a snug fit but not too tight. This is a simple box without hinges or elaborate fasteners. Printed in PLA 0.2 Prusa MK3S

Downloads
887
Likes
118
Rating
4.78
P
PrintablesBaGooN

Dragon Burner V6 Custom Cowl

I really like the angular design of the v6. I made modifications to the design to enhance the appeal of the accent color on the cowl. Therefore, printing the extruder mount and logo in the accent color should give it a looks good. It…

Downloads
886
Likes
167
Rating
5
P
PrintablesTmpx64

V6 Nozzle Box Remix

I needed a smaller version, so I shrank Reven’s Nozzle Box a bit. The hinges have been reinforced, making it suitable for printing at 0.25 or 0.30 mm layer height. It still delivers that satisfying click when closing. If you’d like to…

Downloads
853
Likes
318
Rating
4.75
P
PrintablesVertigoMakes

E3D V6 PTFE Length Cutter Thing

Use this to cut your PTFE to the perfect length once it has been installed in your hotend. Two cutting points are provided. 50mm - For prusa extruder design all the way until R4, and also for all Bear Extruders. 44.2mm - For the latest…

Downloads
849
Likes
124
Rating
5
P
PrintablesCitywrecker

TZ v2 Hotend for Voron Stealth Burner - Bambu Style hotend with V6 style heatsink

This is a hotend mount for the TZ v2 hotend for Voron Stealth Burner. Based on the Bambu style hotend. Care was taken to ensure good airflow for the heatsink and to direct the exhaust air upward to avoid spillover that can lead to ABS…

Downloads
844
Likes
128
Rating
5
P
PrintablesAfterschnitzel

Prusa Mini V6 conversion upgrade

Due to printing reliability I made this V6 conversion for Prusa Mini. Easy to replace. Used parts: V6 heatsink V6 allmetal heatbreak 3x M3x30 screw 4x M3 nut 1x M3 square nut or slim nut longer bowden tube Print instructions Just replace…

Downloads
830
Likes
176
Rating
5
P
PrintablesRockChewer

V6 Update Bambu Lab Ultimate P1P P1S X1-C Riser+AMS Stand - Community Build!

Update 1-6-24 This is designed tight to specifications, so if you want wiggle room or are using filaments that shrink like ABS, please take this into account. Please calibrate and dry your filament prior to printing. Please calibrate your…

Downloads
829
Likes
144
Rating
4.67
P
PrintablesMediaMan3D

E3D Minimalist for V6 & Volcano on Creality CR10/S Ender 3/Pro and clones

For those of you who like to go the minimalist route... From the same designer that brought you all the popular Hero Me remixes... MediaMan introduces the The E3D Minimalist. A simple, clean, lightweight, yet strong mount for your…

Downloads
820
Likes
108
Rating
5
P
PrintablesMazvydas

DD-SM | E3D V6, BMG, Direct Drive, BLTouch, Toolless Accesories (Plotting, Vinyl cutting) mount for CR-10, Ender-3 variants and similar

DD-SM Mount I created this mount to have the motor and extruder as close as possible to the X gantry bracket to not have the weight of the motor hanging a long way away from the metal bracket. This mount is very rigid, there is no droop…

Downloads
804
Likes
165
Rating
4.71
P
PrintablesLMaker

Ender 3 - Ender 5 - CR10 - BMG + V6 - Direct extruder

This is a design of direct extruder with bmg + V6 / V6 Volcano for Ender 3, Ender 5, Ender 5 Plus and CR10. Attached you can find the assembly instructions, material list and all stl files you need to make it. Buy through the links or…

Downloads
785
Likes
141
Rating
4.87
P
PrintablesAardvarx55

Wind Indicator - v6

A sailing friend of mine needed a vertical 'Little Hawk' style wind indicator that can be mounted at the front of their monohull dinghy i.e. where the painter is tied. I found Kieran's design. But when printed, I found the balance was…

Downloads
774
Likes
52
Rating
4.67
P
PrintablesLMaker

Kingroon KP3S - BMG + V6 -Direct Drive

Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for this mod. This firmware is for SMT32F1 chip. If you have the last version of Kingroon, you need compiled the firmware for SMT32F4 chip…

Downloads
753
Likes
108
Rating
5
P
Printables05WEL

Dewalt Battery to Dyson V6 - adaptor

Dewalt Battery to Dyson V6 - adaptor Version 2 -- https://www.printables.com/model/1897716-dewalt-battery-to-dyson-v6-adaptor-_-version-2 No soldering needed Requirements SP0702 switch…

Downloads
717
Likes
99
Rating
5
P
Printables3DPrintDemon

NEMESIS Dual Fan Unit Sovol SV01 Now With BMG, E3DV6 & 5015 Fan Options!!

May I present the arch villain to all of your heroes, the bad guy dressed in black. NEMESIS! Enjoy! edit: New inductive probe version & heat insert version included for E3DV6 systems. NOTE a firmware change is required to use the…

Downloads
692
Likes
79
Rating
4.73
P
PrintablesTDX3D

E3D V6 40mm Fan Duct

E3D V6 fan attachment for 40mm fan. Use 4 M3 screws to secure the fan. Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: Yes Resolution: .2 Infill: 20 Filament: ESun PETG Clear Notes: Walls - 3 Infill Pattern -…

Downloads
684
Likes
53
Rating
4.67
P
PrintablesTwoPuncakes

BMG + V6 + ABL Direct Drive Extruder

Last updated: July 31, 2021 (see Change log section near the bottom of this post) A compact and easy to print direct drive mount for BMG extruders, V6 hotends, and ABL setups. This is compatible with open carriage printers such as an…

Downloads
667
Likes
121
Rating
5
P
PrintablesRieva

ownMade - Nose Breathing V6

I made this for my chronic rhinitis, I can now breathe well through my nose, and different models for different noses It takes some getting used to having it in your nose, I don't have now to use a medicinal nasal spray anymore This can…

Downloads
639
Likes
70
Rating
5
P
PrintablesM.Kayed

MAK Vector Duct - Orbiter V2.0 V6 Volcano Creality/Ender 3 Mount

The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Still a work in progress. More extruder options and…

Downloads
633
Likes
97
Rating
5
P
PrintablesMartin_au

The Shark Filament Buffer and Drybox System (V6)

The Shark filament dry box system has been through many iterations, and is finally at a a stage I'd say is “finished”. It's named because of the shark fin shaped filament guide that makes it possible to load filament easily. The main…

Downloads
613
Likes
405
Rating
4.57
P
Printables3dfiy My Life

Ender 3 Mini Stealthburner V6/V6 Clone Hotend Printhead

Credit to the hardworking guys in the Voron Community for the Stealthburner https://github.com/VoronDesign/Voron-Afterburner/releases/tag/sb-beta0 Design is license under GPLv3 as per Voron license…

Downloads
604
Likes
91
Rating
5
P
PrintablesFelix Morgner

E3D v6 Hotend

This is a model of the E3D v6 Hotend (completely assembled). It is not designed to be printed, but rather to aid in designing 3d printers The FreeCAD assembly requires A2Plus

Downloads
603
Likes
29
Rating
5
P
PrintablesGeddysburg

Arrma Kraton 6S V6 - Wing Mount

This took a while and a lot of filament to get right, and I’m posting it for free. If it has benefitted you (OEM wing mount is $17!), please consider posting a make or buying me a beer to say “thanks guy!”. Anything is much appreciated.…

Downloads
575
Likes
54
Rating
5
P
PrintablesBrooks

Voron Stealthburner for TZ V6 with E3D V6 nozzle

I have adapted the Voron Stealthburner printhead to fit the TZ V6 hotend . Since I had a bunch of E3D V6 nozzles, I didn't want them to go to waste. So, I slightly modified the model to ensure these nozzles could be used with the hotend.…

Downloads
573
Likes
92
Rating
4
P
Printables05WEL

Makita Battery to Dyson V6 - adaptor

Makita Battery to Dyson V6 - adaptor No soldering needed Requirements SP0702 switch (https://www.jaycar.com.au/spst-red-momentary-round-pushbutton/p/SP0702) 9.5mm male spade terminals (https://www.aliexpress.com/item/4001062653078.html)…

Downloads
543
Likes
50
Rating
4.5
P
PrintablesGP

Hario V60 Filters holder (wall/door mount)

I'd recommend to print it vertically to avoid any unnecessary bridging/supports. Use a tiny bit of double-sided sticky tape to fix it in place.

Downloads
538
Likes
78
Rating
5
P
PrintablesDaVinci2000

E3D v6 CFD optimized fan duct

Fan duct for E3D v6 with CFD optimized air flow around heatsink and heatbreak to increase cooling surface and decrease resistance for fan. STEP file included. For the best strength print clip in original horizontal orientation - requires…

Downloads
534
Likes
54
Rating
0
P
PrintablesScottyPrints

SuPLAer Cub v6

Here’s my first attempt at modeling a 3d printable plane. Because I'm pretty new to 3d modeling, I hope I can get some feedback on this free model! Specs: wingspan 980mm weight without electronics: estimated one flying spool - currently…

Downloads
526
Likes
110
Rating
5
P
Printablesthomers

Dyson Narrow Nozzle 10x36mm (v1..v6)

Basically prints without support and brim, but I'd recommend a 5mm brim and organic support for the locking interface (as in the .3mf file). 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality…

Downloads
523
Likes
98
Rating
5
P
PrintablesCritex

5015 Satsana Fan Duct For Ender 3 With E3d V6

This is a modified version of the Satsana fan duct compatible with the E3d V6 , 5015 blower fans and the BLTOUCH. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 15-30%…

Downloads
518
Likes
42
Rating
1
P
PrintablesWinkel

E3D V6 Hotend Holder

E3D V6 Hotend Holder for Creality Ender 3. Material: PETG Nozzle: 0,4 mm Layer: 0,16 mm Infill: 20% Perimeters: 5 You must make threads by M3 tap!

Downloads
518
Likes
36
Rating
0
P
PrintablesStarBug_Props

Bo-Katan V6

Ok , so this is the V6 of my Bo Katan . Much , much more accurate. Includes the neck seal Cut up files included. 198mm inside ear to ear measurements at 100% (i've tried to get it to Katie Sackhoffs measurements) This is my best yet.…

Downloads
514
Likes
65
Rating
5
P
PrintablesDodo Designs

Suzuki SV650/SV1000 Grab Handle Infill/Cover

Feel free to print these files for yourself or get them printed through specific services like 3Dhubs. Please don't support the illegitimate eBay/Facebok sellers that stole the design without attribution! If you use these files, I would…

Downloads
513
Likes
21
Rating
5
P
PrintablesDuke Doks

E3D V6/Volcano BMG Ender 3 / 3 pro / 3 v2 / 5 Plus

HOW I USE IT: ENDER 5 PLUS: https://bit.ly/2YHzpws BMG: clon:…

Downloads
507
Likes
79
Rating
5
P
Printablesndl

E3D V6 Fan Duct for 40mm Fan

Fan Duct for E3D V6 and Clones for 40mm Fans. Made some corrections, now it fits perfect Print Settings Printer: Own Build ndl V2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 70-100 Filament: No Name ABS Black Notes: Print Speed…

Downloads
506
Likes
39
Rating
5
P
PrintablesAdam Storm

FilamATrix TZ V6 2.0 Hotend Mount

The FilamATrix toolhead is great, but the Dragon HF mount just let too much air blow across the heat block of the TZ V6. I remixed the geometry of the Stealthburner mount from Citywrecker and combined it with the Dragon HF duct from…

Downloads
491
Likes
68
Rating
5
P
Printableswhoppingpochard

BMG/V6/Volcano 5015 fan duct for Artillery Genius / Sidewinder X1

Remix of https://www.thingiverse.com/thing:4584743 for use with 5015 cooling fan. Haven't actually printed this yet! Print at 0.2mm layer height or below for best overhangs. EDIT 2020-12-12: The first version of this duct was completely…

Downloads
486
Likes
44
Rating
5
P
PrintablesXerses

Xerses Remix/Remake - Kia EV6 Console Capacitive Button Cover

2025-01-26 UPDATE: I received a request to make one without the heated steering button so I added it to the 3MF and I created a new set for RHD vehicles, so there is a new RHD 3MF file, as well as the RHD STL files. 2025-01-25 ADDED A…

Downloads
482
Likes
30
Rating
0
P
Printables05WEL

Milwaukee Battery to Dyson V6 - adaptor

Milwaukee Battery to Dyson V6 - adaptor No soldering needed Requirements SP0702 switch (https://www.jaycar.com.au/spst-red-momentary-round-pushbutton/p/SP0702) 6mm male spade terminals…

Downloads
480
Likes
42
Rating
0
P
PrintablesLMaker

Kingroon KP3S - Orbiter V2.0 + V6 - Direct Drive

Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for this mod. This firmware is for SMT32F1 chip. If you have the last version of Kingroon, you need compiled the firmware for SMT32F4 chip…

Downloads
473
Likes
89
Rating
5
P
PrintablesCNC Kitchen

Improved Silicone Sock for E3D V6 hotend

This is a mold for an improved silicone sock for the E3D V6 hotend that is harder to come loose during printing. Use with 2-part high temperature silicone. Video on the whole process: High temperature silicone (aff):…

Downloads
460
Likes
135
Rating
4.93
P
PrintablesR1CDM

Hikvision DS-KABV6113-RS protective shield

Hikvision protective shield for KV6103/6113 series villa door station.

Downloads
458
Likes
35
Rating
5
P
Printablesreemo3dp

Plain Nozzle Box (print-in-place, MK8/V6/Volcano)

This is a remix of the original nozzlebox with options that fit Volcano and MK8 nozzles. Like the original, it prints in place and is locked by a magnet (6x2mm!) and an M3x6 (or smaller) screw. It doesn't come with any markings so that…

Downloads
456
Likes
63
Rating
4.91
P
Printableswit4r7

Coffee filter holder Chemex, V60 and AeroPress

I have several coffee filters that were never neatly stored in the cupboard.Therefore I have designed this holder. Attention! Despite several adjustments of the Brim/Mouse ears on the side, the pressure did not stick to the sheet all the…

Downloads
451
Likes
72
Rating
5
P
Printablestearandfix

Dyson v6 dust bin clip fix

The hook that holds a lid of a dyson v6 vacuum broke off. So, I designed a clip on hook that works just like the original hook. It clips to the remains of the broken hook. Mine holds without any glue. Prints without supports. Designed in…

Downloads
448
Likes
27
Rating
5
P
PrintablesVolan

Fiberoptic WLED Hybrid Wall Clock (40cm) v6.2

--------------------------------------------------------------------------------------------------------- Clock running WLED above. No, you don't need a large printer to make this. It's split into 6 segments. In fact - it should be…

Downloads
446
Likes
290
Rating
5
P
PrintablesTritschi

Dyson V6 Drill Dust Vacuum (Bohrstaub-Sauger)

Just designed my own Dyson V6 drill dust vacuum nozzle.I know there is a lot in the community, but every model looks a bit different. YOU should try to figure out which fits best to you. The photographs show a two-color built. The reason…

Downloads
445
Likes
86
Rating
5
P
PrintablesFredslund

Nozzle Storage - Multiple layers - V6

Here is the Ultimate nozzle storage unit! This design was updated 04-02-2021 to include more model to choose between and the text has been made internal instead of external for nozzle size. This system covers 0.25, 0.4, 0.6 and 0.8mm…

Downloads
444
Likes
93
Rating
4.8
P
PrintablesM.Kayed

MAK Vector Duct - Orbiter V6 Creality/Ender 3 Mount

The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Required: PTFE Tube (Goes between V6 and Extruder) M3…

Downloads
443
Likes
69
Rating
4.75