4,158 models
Everyone who is traveling with a Caravan knows it. The grassel and bollards in the fridge because the bottles bump into each other all the time while driving. With the help of this spacer, you can easily determine the size of your…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Let's do multicolour now. Spider-Man 5 colours with MMU2S. Print at least 150mm height. Gcode spidermanps4advancedsuit-mc-basered_icz_02mm_pla_mk3smmu2s_2d7h43m.gcode provided by Ceji3D https://www.instagram.com/ceji3d/ Gcode for 2x…
Print approx. €47.06–€57.52 excl. taxPreliminary estimate for one variant
This is a mount for the new Starlink Mini antenna. It has spacers that can be scaled in the Z axis to adjust for different van roof ribs. They also act as a cable wrap for the 50 foot cable that comes with it. For the 2023 RAM Promaster I…
Print approx. €17.03–€20.82 excl. taxPreliminary estimate for PETGSource material: PET
Prusa supplies linear advance gcode for the MK series printers, but not for the Mini, so I decided to build one to help dial in a problem I've been having. The GCode is generated from Marlin's website found here:…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
All printable parts for your Advanced Filtration System Add-on. You will also need Basic Board + PSU Add-on, which is shipped automatically with Advanced Filtration System. All of the add-ons and community models can be found here . Print…
Print approx. €7.02–€8.58 excl. taxPreliminary estimate for PETGSource material: PET
3 different hooks and rings for sliding into caravan slider. For clothesline towels and other atachment.
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
The 3d scan was lacking some detail, so I gave him a complete makeover. Two photos are from my print @ 10cm high with no post processing. I have added the gcode for that print, which had organic supports. Printed with PolyTerra PLA cotton…
Print approx. €7.28–€8.90 excl. taxPreliminary estimate for one variant
Resized to fit the Sylvania family bunnies this sofa chair prints well, looks soft, and adds a ‘lived in’ look.
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for one variant
Parts are optimized for ease print.The main body was pre-supported. If you want to make your own supports, a file without them is included. Keep the orientation of the parts as original STL file! The whole model is bolted together with…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
I created a clamp for my awning so we can hang things. The clamp I had seen on thingiverse was the base of my new design, I recreated it in a smaller version so it would fit the awning. Printed it with PETG 0,2mm layer height and 20%…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
Redesigned the hook so it would print better then his version. Now you can you use it also for hanging towels. hook for awning rails hook for tent rail In addition to this, see also:…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Tendedero Caravana Tendedero que se inserta en el rail de la caravana, autocaravana o camper. Simplemente con ponerle una cuerda tienes un tendedero para cuando no tienes un árbol cerca. Impreso en Petg. Al 20%, menos la guia que tiene el…
Print approx. €11.51–€14.06 excl. taxPreliminary estimate for PETGSource material: PET
Can you solve this 3d puzzle? It consists of 18 parts, so seems to be pretty easy. In original size each cube has an edge length of 2 cm (little smaller because of some tolerance), so the whole puzzle is 8 cm long in every direction. The…
Print approx. €3.49–€4.26 excl. taxPreliminary estimate for one variant
A wonderful round table will serve as an excellent solution, both for spending time together at home, and for creating a small (or LARGE) cozy cafe! Round table erfectly complement the collection of garden furniture ! Compact and cozy,…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Our 2023 RAM Promaster Van has 3 cup holders below the console. They are hard to reach and do not hold our mugs. We have a cell phone holder, but not the wireless charger. This model easily slides over the cell phone holder and rests on…
Print approx. €13.40–€16.37 excl. taxPreliminary estimate for PETGSource material: PET
print took about 18hrs .16 layer height %15 infill supports aren't necessary.
Print approx. €14.42–€17.63 excl. taxPreliminary estimate for one variant
Update 03/09/2023: I have added a new version, v.16, which removes some of the additional tolerances I added to accommodate ASA warping, in order to reduce stress on the pins on the side of the model. This version is designed to be made…
Print approx. €1.80–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
The shafts on your radio for these knobs may or may not have little metal clips attached to them (see pic on right), which changes the diameter. Make sure you print the knob with the correct sized hole, either “WITH CLIP” or “NO CLIP”.…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
They asked me if i can make a playground for the Sylvanian family. This was a quick build in Tinkercad, and printed fine, the bridges could me better. i have still to print a temp tower ;) Print instructions i have printed this on the…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
Replacement for backside part of VW Multivan T4 cup holder
Print approx. €2.97–€3.63 excl. taxPreliminary estimate for PETGSource material: PET
Sur un Peugeot 5008 2 et 3008 (et peut-être autres modèles de voitures), cette agrafe accroche le tuyau (qui amène le liquide de nettoyage du pare-brise vers la brosse) au bras en métal de l’essuie-glace . Il y a 2 agrafes par bras…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
A table with chairs for ‘critters’ with tails. Our dollhouse is inhabited by Sylvania Family-sized bunnies and this set was built for them. Around a 1:16 scale, the chairs print with minimal supports. The design allows the critters to sit…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
I created this foldable/collapsible traffic cone (pylon) for our van life, we have little space to put everything in our small VW van so a traffic cone of normal size will not be suitable. This is why i recreated a traffic cone which has…
Print approx. €6.80–€8.31 excl. taxPreliminary estimate for PETGSource material: PET
I bought something similar and loved it, but it broke quickly. I redesigned it and printed it in PLA, but would recommend PETG.
Print approx. €11.98–€14.64 excl. taxPreliminary estimate for one variant
ERROR in V2 Code ! Sorry! This was fixed in V3 In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i…
Print approx. €7.68–€9.39 excl. taxPreliminary estimate for one variant
Ein Trichter, der beim Berühren mit der Gießkanne nicht gleich runter fällt. Ich habe die Zapfen, die der Schlossdeckel besitzt hier her übertragen. Dadurch kann ich den Trichter durch Drehen fest mit dem Stutzen verbinden. Da man leicht…
Print approx. €5.81–€7.11 excl. taxPreliminary estimate for one variant
I tested the Prusa gcode generator to compare against Skreelink's gcode and the output is nearly identical. I tweaked settings to use Prusament values for PETG and PLA and turned on the Anchor Frame. The frame helps with adhesion and…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
As we would like to go to camping and sleep in our T7 Multivan (2023), we just needed something for the ventilation… Some kind of window adapter… So this is the result of our idea and my first own design This ventilation grille is…
Print approx. €2.94–€3.59 excl. taxPreliminary estimate for one variant
The model is still a prototype that I am testing in my car. Replacement of the heater fan grille with a cup holder adapter. The dimensions are pretty tight, so it's better to take out all the grilles, insert the replacement and then put…
Print approx. €5.52–€6.74 excl. taxPreliminary estimate for PETGSource material: PET
For little explorers who are ready for the next challenge, there is the "Advanced Shape Set". This set expands the horizons of learning by introducing more complex shapes where it helps stimulate fine motor skills and eye-hand…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
This stand comes in handy to repair or mod Gameboy Advance handheld consoles. Repairs usually require taking apart the whole system, which can be challenging to put back together. When placing the device face down on a flat surface, the…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
Accessories for the VW T3 camper model. (Universal trailer model for future projects) used screws: M3x20mm (12x) red M3x6mm (3x) blue Keep the orientation of the parts as original STL file. Printer setup: Nozzle diameter 0,4 10% infill…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
printed in 0.2mm PETG with 100% infill - works perfectly for me.
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
In my caravan, a Sprite Europe, de blinds are hold by 2 little holders. Some of them were broken, therefore I copied them in Fusion 360 and printed with Prusament PETG. Sliced in PrusaSlicer 2.6.6: 0.6 nozzle, 0.15 detail, brim, organic…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Audi A4 Avant B7 locking clip for the warning triangle hatch
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
Hi! I made a simple home for our Sylvanian families. Joint is realised with filament 1.75mm. Work is still in progress, but this first version is playable. First print is in testing mode by two small children. Please, place here some…
Print approx. €7.55–€9.23 excl. taxPreliminary estimate for PETGSource material: PET
After watching Castlevania Nocturne, and then rewatching the first 4 seasons of the magnificence that is Netflix's Castlevania, I went to print off a belmont family plaque to have on my wall, only to find there really weren't any? which…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Description Caravan window handle for old caravan. Distance between bolts is 28mm. Model contains of 4 parts of the handle, stop and otdoor cover. While printing Handle_base, insert pause at 4,4mm and insert M5 nut. Handle top has to be…
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
bath knob for replacement broken original kolečko na vanu nahrazující rozbitý originál
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for PETGSource material: PET
nach konstruierter Griff für Handbremse für älteren Dethleffs Wohnwagen. der originale griff hat sich aufgelöst und zerbröselt. Im Netz habe ich nichts gefunden, also habe ich die noch vorhandenen Fragmente mit 123D design zu einem neuen…
Print approx. €5.31–€6.49 excl. taxPreliminary estimate for one variant
The legendary "Advanced Combat Blade model 90" from Battlefield 3 & 4. I designed it for a friend, who used this knife as his favourite weapon in BF3 & BF4. Our clan affectionately calls this knife “Teppichmesser” which means “box…
Print approx. €0.32–€0.40 excl. taxPreliminary estimate for one variant
This elegant miniature vanity table with a working drawer is the perfect addition to any dollhouse or diorama. Featuring curved legs, subtle edging, and a functional pull-out drawer, it brings a touch of classic style to your mini…
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Perhaps not a wide audience. the pick has VH logo on both side (proper view both ways). I decided on .8mm thicness for a medium action. One can use different filament for alternate picking action. Set up so once the 3mf file sliced it…
Print approx. €0.60–€0.74 excl. taxPreliminary estimate for one variant
German below. Because I like the Scooby Doo bus so much, I had to create it myself once. However, I gave him a little facelift. ^^ Besides the four different sizes , the Mystery Machine comes in two versions (see photos). Once an open…
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for PETGSource material: PET
Peça de substituição, batente fechadura de gaveta autocaravana Burstner que se estragou. Replacement part, Burstner motorhome drawer lock stop that was damaged.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
A straight pipe adapter from a Kärcher WD3 to a Bosch AdvancedOrbit 18 2mm thick walls with .1 mm clearance on the inside for most optimum fit Kärcher pipe diameter - 35.30 mm Bosch pipe diameter - 29.00 mm Print and enjoy, maybe a layer…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
This is Linus van Pelt ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
reupload from https://www.thingiverse.com/thing:4464329
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
stojan na maľovanie striekanie plastových modelov lietadiel vytvorený pre potreby opráv starých modelov. 1 x základňa 4 x L lišta 05 alebo L lišta 70 mm 2 x nadstavba krídlo 02 2 x nadstavba trup 02 4 x voditko 01
Print approx. €5.04–€6.16 excl. taxPreliminary estimate for PETGSource material: PET
This is a fan holder for the in caravans (tested on Polar 560). You need 2x 120mm 12v (pc) fans and some screws to intall the holder. Make a color change (M600) at 3mm to get the blue logo.
Print approx. €4.70–€5.75 excl. taxPreliminary estimate for one variant
This is Lucy van Pelt ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
I remodel the original part in solidworks and added a vertical splash guard. This prevents the coffee powder from splashing over the portafilter. If you only need the main holder you can download the solidworks file and remove the splash…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant
This 3mf is for the Prusa XL. 300mm diameter I printed this in PLA - 4 colors all from PolyTerra Matte Charcoal Black Matte Army Blue Matte Yellow Matte Blue I used a modifier to reduce material use in the first several layers. The upper…
Print approx. €9.50–€11.61 excl. taxPreliminary estimate for one variant
The sift is intended for bathtub drains where the plug has an 8-mm center shaft. The model has a 3-mm inner screw, so that you can strengthen and weight the printed shaft with a 3-mm metric screw.
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
A circular Vancouver Canucks logo. I did two filament changes to get the three colors. I used Tinkercad to make the stl.
Print approx. €3.12–€3.81 excl. taxPreliminary estimate for one variant
Opravný díl ke karavanu euro mobil tištěno s MMU a materiál doporučuji ASA nebo ABS
Print approx. €4.00–€4.88 excl. taxPreliminary estimate for PETGSource material: PET
Use these simple adjustment rings to change the height of your Vanmoof S3s handlebar. I've modeled these closely resembling the original parts of the, now defunct/bankrupt, Vanmoof, in order to keep more bikes on the road. Printing: These…
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
Knob for Caravan Truma Vent. Truma Trumatic Vent TN1 TN 1 Drehregler Regler für Lüftung / Ventilator 220V
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
Print Guide: Filament : (PLA, PETG, or ABS recommended) Use 20% infill for durability and lightweight results Support: None Layer Height: 0.2mm for detail or 0.3mm for faster prints. Print speed: 50-60 mm/s for smooth results. Note:…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
( klíčenka - camper, karavan)
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
For the axis of the lid, pass filament through the holes then cut to length. Pour axe du couvercle, passer du filament dans les trous puis couper à la longueur.
Print approx. €4.26–€5.20 excl. taxPreliminary estimate for one variant
This is for s 2022-2026 RAM Promaster. It slides over the cell phone holder. It works with vans with/without wireless chargers. Will Phelps at Alien Enterprises talked to me about reducing the cup holder print time and told me about his…
Print approx. €11.67–€14.27 excl. taxPreliminary estimate for PETGSource material: PET
I bought a Bosch AdvancedVac 20 vacuum cleaner. Unfortunately, there are not enough brushes for cleaning in the kit. I decided to adapt the brushes from LG. The result is this adapter. Printed with PLA plastic, 30% infill
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
Insert for a caravan shelf, which doesn't have a lip or anything so things fall if you open the door. The insert is cca 230 x 100 mm , with a cutout for a hinge. There are two versions, V1 and V2. V1 is what I printed and the walls are 2…
Print approx. €7.14–€8.72 excl. taxPreliminary estimate for one variant
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 15% infill.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Diemensions: 2x150x75mm (RESIZABLE!!) Print from pla for smoothest surface. Freecad file for changes.
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
I have a 2021 Citroen Berlingo Van MK3, I wanted to upgrade the front door speakers, but needed an adapter to get them to fit, I couldn't find a reasonable priced adapter, so i designed my own, fits perfectly, 3MF and GCODE file included
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant
Printed with PLA (0,2mm SPEED) with 5% Cubic infill. Canopy has place for a magnet, same as original, but can be also fastened using a velcro.
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
Prusa Advanced Filtration System Bracket remixed to fit Fette Filter 100x100x30mm ( 4" x 4" x 1.2") Fette Filter - Air Purifier True HEPA Replacement Filter Compatible with OSIMO A2 Air Purifier with High-Efficiency Activated Carbon…
Print approx. €5.66–€6.91 excl. taxPreliminary estimate for PETGSource material: PET
První vrstva 0.3.
Print approx. €3.08–€3.77 excl. taxPreliminary estimate for one variant
Několik slovanských symbolů v podobě klíček. Several Slavic symbols in the form of keychains.
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
I created this box to hold the Go stones that come with every Go game set. Other boxes allow for holding the black and white stones, but don't give you a place to hold the stones you capture from your opponent during play. This box does…
Print approx. €7.66–€9.37 excl. taxPreliminary estimate for one variant
jdm kei van fun key chain
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Baby Face Vance Meme.
Print approx. €3.99–€4.88 excl. taxPreliminary estimate for one variant
This cradle lets you organize your Vanmoof S3 toolkit, in the gridfinity universe.
Print approx. €17.10–€20.90 excl. taxPreliminary estimate for one variant
I needed to push the drawer as far back as possible. As the metal contact surface would eventually damage the car's plastic, I made this foot that slightly lifts the drawer and moves and extends the contact surface back into the car's…
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for PETGSource material: PET
Minimal through-bolted mount I designed for my Robust live center and ring drive center attachments… https://www.turnrobust.com/product/live Also fits similar ¾-10 centers by OneWay, Savanah, etc. The weight is on the through-bolt or wood…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
If the light from the screen annoys you, here's a cover
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Orologio digitale da scrivania con Arduino nano, Rtc e Display da 1.44 inch.
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Lift your favorite 1x1 Gridfinity module up above the others by mounting it on this artistic, vanity baseplate. It uses organic supports between a round base and the upper platform which begins as a hexagon and ends as a square. Requires…
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant
Můj první užitečný model a výtisk :-) Jednoduše stačí vytisknout a nasadit. V případě, že se vanová zástěna má tendenci otevírat mimo vanu, zarážka zabrání pohybu. My first useful model and print :-) Simply print and deploy. If the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
Ersatztrichter für Kaffeemühle "Gastroback Advanced PLUS". Mich hat immer gestört, das bei dem Original-Kaffeetrichter sehr viel Kaffepulver neben dem Siebträger landet. Um dies zu vermeiden, habe ich dieses Modell entworfen, welches das…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
Printed in ASA so it doesn't warp, upright print no supports needed
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
The stock tube trays from Thermo only hold Thermo MS vials which are far too small for sample fractionation. Hence we designed a tray holding 2 mL tubes and printed it. Note that you need to mount the appropriate data matrix codes (these…
Print approx. €14.06–€17.18 excl. taxPreliminary estimate for PETGSource material: PET
I broke another cabinet latch on my 40 year old van, so I decided to print a replacement for the broken part. Take the latch apart with the 3 screws, then use pliers to take out the 2mm pins holding the broken part in place. Put in the…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
This model is a practical remix of a wall mount designed for the VanMoof S2 E-Bike charger. The wall mount has been extended with an additional holder for the Xiaomi Aircompressor, ensuring that you always have the essential tools for…
Print approx. €9.51–€11.63 excl. taxPreliminary estimate for one variant
lavanda, lavende, lavender, levandule, lavendel, casia - print at least in PETG because of UV
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
Prevent damage to your flow cell when it's not in the detector
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
On my window the support was broken. I made a spare part to make it functional again.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Sandcastle Spinner/Wind Vane This is a small wind vane and spinning propeller designed to be placed into the top of a sandcastle, flowerpot or on a tabletop using a standard recycled soda bottle (please see photos). The only other extra…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
like an old delivery van.
Print approx. €10.16–€12.42 excl. taxPreliminary estimate for one variant
untere (größere) Ersatzspannhülse für LED-Scheinwerfer-Stativ mit Trapezgewinde TR38x3, die originale Spannhülse war geplatzt Festigkeit ist mit PLA ausreichend, gedruckt auf einem Prusa XL
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
Einfaches Modell das eine 0,7L Havana Club Rum Flasche und 5 Dosen Cola in Schale wirft. Hatte das Modell direkt im Druck auf der Unterseite noch mit Glückwünschen für den Beschenkten beschriftet. Gedruckt in PETG auf einem Prusa MK4.…
Print approx. €14.75–€18.02 excl. taxPreliminary estimate for PETGSource material: PET
This wall mount can be used to put the Vana DC90 remote into. The remote can also be used when it is at the holder. Print Instructions: Print standing upwords, not laying on the ground. This way, no support is need and the print quality…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Om dat er in de handel geen verloop bestaat van groot naar 14.2mm heb ik het zelf geprint. Ik had wel een rubberen verloop van 50 naar 30 maar dat was nog niet genoeg. Ik had het hele verloop kunnen printen van 50 naar 41.2mm en dan beide…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Needed a cookie cutter for graduation party. Have to do the school mascot of course!
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
Knob compatible with 220Volt 3200 Watt Vanette Ceramic Oven. Remix from knob with Compatible D slot in the back, added a ring with correct number positions as well as the slot for a M3x20 screw to secure it to the post. Unknown if it will…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
Několik slovanských symbolů v podobě klíček. Several Slavic symbols in the form of keychains.
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
