Search results: webcam

Sort order

1,552 models

P
PrintablesVBalsa

Ender 3 V3 SE webcam mount

Also required: CamScrew-10mm.stl screw made by @Vector3dArt to attach the webcam.

Downloads
1,042
Likes
97
Rating
4.4
P
Printablesburtworks

Hot Shoe / Cold Shoe Mount for Webcam

This is a Hot Shoe / Cold shoe mount to mount a webcam on top of a camera. ¼-20 thread tripod mount. I used this to mount my webcam for Octoprint on top of my DSLR I'm using for Octolapse within Octoprint. It's very light duty even when…

Downloads
942
Likes
86
Rating
4.75
P
PrintablesLilifee

Raspberry pi zero webcam (HQ camera)

Enclosure for raspberry pi zero with HQ camera (flex cable inside). Feel free to adapt the model to your needs. The image quality of the camera is beautiful, and I'm happy with the result. I found a project called ShowMeWebcam, which…

Downloads
861
Likes
163
Rating
4.75
P
Printablesfoorschtbar

Logitech C270 Webcam holder and arm for Original Prusa Mini/MK3/MK4

A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini, i3 MK3, MK4 and similar printers with standard aluminum extrusion profiles. You can Mix&Match the different arms, but i suggest to use the parts…

Downloads
555
Likes
111
Rating
4.89
P
PrintablesJobPrinter

Very Slim Webcamcover for ALL

I got a webcam cover and it was way to thick, when I closed my laptop it would bend the screen. So I designed my own. I wanted tot make it really, really thin but still strong and good quality. Hope you like it as much as I do. I used…

Downloads
335
Likes
36
Rating
5
P
PrintablesAndreas G

V2: Slide-On Notebook Webcam Cover - in various dimensions

Slide-On Notebook Webcam Cover - in various dimensions Measure the width and height and download the best fitting model. If you need other dimensions feel free to leave a comment. 07-07-2022 Added V2: thinner walls and smaller dimensions

Downloads
297
Likes
106
Rating
5
P
PrintablesSplemsby

Logitech C920 HD Pro Webcam Mount for LACK Enclosure

I found that when deciding on a camera mount, I didn't really need the ability to rotate my camera left and right, but if I was printing something tall, I'd just need to be able to tilt my camera up. So I came up with this simple…

Downloads
190
Likes
37
Rating
4.5
P
PrintablesCorey Ward

Tripod Head VESA Mount for Webcam/Camera

Mounts to an existing monitor VESA mount (100mm hole spacing) using the existing machine screws and holds a tripod head with a standard hex-head 5/8"-16 bolt (not included). Tripod head mount can be up to 55mm in diameter. Center point of…

Downloads
175
Likes
45
Rating
5
P
PrintablesMetikumi

Small Two-Axis Webcam Holder for Printer Enclosure

This is a small two-axis webcam holder to fasten inside of a printer enclosure. It requires no screws and the camera can be attached using the printed 1/4" camera screw. No screws are needed for the assembly. The parts have an…

Downloads
157
Likes
42
Rating
4
P
PrintablesOlivier Le Mô

Support de webcam pour Prusa i3 mk3s

Support simple, qui se clipse sur le chassis, sans vis. J'ai rajouté 2 nervures au design d'origine pour rendre le bras plus rigide.

Downloads
148
Likes
15
Rating
5
P
Printablesfrdzmn

Webcam step for thin-framed monitors

Webcam Step: Elevate Your View Modern technology has gifted us with sleek, thin-framed monitors. While these technological marvels enhance our workspaces, they also present a new set of first-world problems: webcams dangling into the…

Downloads
146
Likes
20
Rating
5
P
PrintablesArchaeologic

Prusa Enclosure Mount for Logitech c270 Webcam

Printing PLA, .20mm, supports optional ~22min Parts Required 3x20 pin (1x) Logitech Camera c270 w/hinge mount removed (1x) M3x8 Screw (1-3x) Assembly Push the 3x20 pin part way through one side of the mount, use pliers if neccesary Put…

Downloads
143
Likes
27
Rating
4.83
P
Printablesfiretech

Trust Trino HD Webcam Case with Adjustable Focus (and multiple mounting options)

This case allows you to (manually) adjust the focus of a Trust Trino HD webcam (available for ~€10 on Amazon ) and mount it on a flat surface, rotatable in one or two axes (tilt or pan and tilt). With this case, the webcam becomes quite…

Downloads
138
Likes
18
Rating
5
P
PrintablesCalzune

Webcam mount with printable screw

I printed with a 0.6 nozzle, but 0.4 will also work. Both parts can be printed at the same time but I suggest printing the threads at 0.2mm layerheight and 100% infill. And dont tighten it to much in the camera. I created 0.4 and 0.6…

Downloads
124
Likes
10
Rating
4.5
P
Printablesthe0bone

Z Axis China Webcam Mount Prusa i3 MK3

This Webcam is sold by different sellers and brands. I know it from IVSO and wansview. The Foot is 15mm and can be easily unscrewed from the original holder. The same screw will be used for this holder. In addition a M3 Screw to place it…

Downloads
104
Likes
20
Rating
5
P
PrintablesTJL

Generic WebCam Mount for Ender 2 Pro

This is a Model allows for the Webcam to be attached by use of a 1/4" x 3/4" Stainless Steel Hex Bolt. Rather than disassembling the Webcams to attach it to the mount. It attaches using a friction clip attaching to the Z roller Motor…

Downloads
77
Likes
12
Rating
0
P
Printableseireidium

Right Hand Webcam Mount for Prusa Mk3/S

This webcam mount simply lowers the camera position and extends it out towards the front a bit for a slightly broader panorama of the print bed. Not rocket science, just works for me. Prints with no support in PLA or PETG with 10% infill.

Downloads
72
Likes
6
Rating
5
P
Printablesmikevill1

Lens Hood for Razer Kiyo Pro Webcam

Lens hood to help in environments where you may have some light sources that affect auto adjustments. Includes lip on the back that clicks into the groove on the webcam body. Prints well and is functional at 0.3mm. I printed at 0.15mm for…

Downloads
62
Likes
8
Rating
0
P
PrintablesRogueAI

eMeet NOVA Webcam Privacy Shield

This print is a privacy shield for the eMeet NOVA webcam. I believe newer versions are sold with privacy cover but mine came without one. So I designed this privacy shield. You can simply slide it in and out of place. The USB cable on the…

Downloads
61
Likes
2
Rating
5
P
PrintablesJean.de.BZ

Support smartphone comme (as) webcam

Pour surveiller vos impressions sans avoir recours à une caméra IP : un vieux téléphone (même 3G). Ou une tablette. To monitor your prints without using an IP camera: an old phone (even 3G). Or a tablet. Print instructions Une idée pour…

Downloads
61
Likes
5
Rating
0
P
PrintablesBram

Lack enclosure generic webcam mount

Designed a simple webcam mount for my cheap, brandless Aliexpress webcam. Based on the design of a C920 webcam mount. I liked the simple design, that could use the built-in arm and could easily be removed in case the top table should need…

Downloads
61
Likes
12
Rating
5
P
Printablesquattro

Privacy Cover for Sandberg Flex 1080p HD Webcam

The cover slides easily on and off the lens. The scad file is configurable in terms of spacing. I also added my own kind of elephant foot compensation because it often affects more than one layer and it really hinders the sliding…

Downloads
61
Likes
4
Rating
0

Anycubic Mega S Webcam Holder

Take your current print settings but not too less infill

Downloads
58
Likes
5
Rating
0

Webcam Arm Screwless with Cable Clips

Webcam Arm for Logitech C920/C922 (should work with any cam with standard camera screw hole, hooks into the Prusa aluminium frame, no screws needed. Added camera clips and a short ¼" screw and washers, you only need a cam and 35g of PLA.…

Downloads
51
Likes
5
Rating
3
P
Printablescmos

Camera-Holder for double display stand - extended pipe clamp webcam mount

extended the length of the original design by ~35mm, and added some more rounding and smoothening

Downloads
50
Likes
7
Rating
0
P
Printablestarajdactyl

Ender 3 Pro/Neptune 2 Clip-On Webcam Mount

I remixed a webcam mount that was intended for tripod-mountable cameras and made it suitable for use with clip-on webcams. I basically just flipped the webcame platform vertical and removed the tripod hole, since it is now unnecessary.…

Downloads
49
Likes
3
Rating
0
P
Printablesharaldan

Laptop webcam case for the Articulating Raspberry Pi Camera Mount

Case for a laptop webcam to put onto the Articulating Raspberry Pi Camera Mount by @Sneaks. Made for a webcam taken from a Dell Inspiron 15 3542, but can be easily adapted to any other laptop webcam. Fusion 360 and .step files are…

Downloads
48
Likes
6
Rating
0
P
PrintablesReini

Ballnut mount for USB webcam for Sneaks articulating camera mount (FreeCAD)

I needed a ballnut mount for my USB webcam (https://www.amazon.de/gp/product/B08M99YWG9) for the articulating Rasperry Pi camera mount from Sneaks.

Downloads
47
Likes
10
Rating
5
P
PrintablesYolo

Neptune 4 Pro Rail-Webcam with 1/4 inch thread

ESUN - Tough PLA Grey 0.2 mm - height 4 walls 15 % gyroid infill Support on build plate for thread (isn't the most optimal but fits and holds) Rest of the settings in the png files Snaps into the rail, can't say how normal PLA will hold…

Downloads
46
Likes
3
Rating
0
P
Printablestunisiano187

Netatmo Webcam Welcome and Health coach light support

Netatmo Webcam Welcome and Health coach light support

Downloads
34
Likes
1
Rating
0
P
Printablesvolker_puttmann

China-Webcam Z-Axis (higher position)

Hey, i made a remix from the "Z Axis China Webcam Mount Prusa i3 MK3 " from the0bone, because i wanted a higher position for my china webcam on my z-axis. This design is 40mm higher than the original from the0bone. It works perfectly with…

Downloads
34
Likes
7
Rating
5
P
Printablesyetiszaf

Document cam stand for logitech webcams

I needed some form of document camera to be able to digitize hand-drawings reasonably fast. Since they're 60+ Euros and I had a webcam around I decided to build a stand for the webcam. Additional material required: 2x40cm 8mm…

Downloads
33
Likes
13
Rating
0
P
Printablesstegi

Prusa Mini Camera Mount Remix for Aukey PC-LM1E Webcam

This is a mount/adapter for the Aukey PC-LM1E Webcam, based on the Prusa Mini camera mount here: https://www.printables.com/model/142759-prusa-mini-camera-mount-remixed At first, I generated a holder with the OpenSCAD file, which turned…

Downloads
32
Likes
8
Rating
0
P
PrintablesDallan

Logitech C270 Webcam Mount to X-axis Motor - Centered View

See original item: 221546. Neck was weakened to allow path for pin: I printed with 40% infill to try and compensate--this probably wasn't necessary. It seems plenty strong.

Downloads
30
Likes
2
Rating
3
P
PrintablesEdison82

Logitech C902 Webcam Cover

Logitech C902 Webcam Cover - Sleek and Functional Privacy Solution Protect your privacy in style with this custom-designed webcam cover for the Logitech C902. This 3D-printed accessory is the perfect blend of practicality and aesthetics,…

Downloads
15
Likes
1
Rating
0
P
Printablesnem

Reinforced webcam holder for MK3/S/+ MK4/S/+

PETG recommended with at least 15% gyroid infill, 2 horizontal and 3 vertical shell layers. Supports recommended but not required.

Downloads
13
Likes
1
Rating
0
P
PrintablesPeopleware

Webcam Halter Vertical Monitor Säule - 35/30/25 mm -Webcam Mount Vertical monitor column

Update vom 30.1.2025: Kamera Befestigungschraube in neuer Version mit Einfädelhilfe zur leichteren Verklebung Nun einfach Kleber flächig in die “Einfädelhilfe = überstehender Rand” auftragen, aufsetzen und drehen bis die Rändelkappe…

Downloads
8
Likes
1
Rating
0
P
Printablesmgen

Microsoft WebCam mount for the PrusaBox

Mount to install Microsoft Live VX2000 or Microsoft LifeCam Cinema in the PrusaBox made by https://www.printer-box.com This mount was created to get the possebility to use “old” Microsoft WebCams togehter with the [Prusa] Box. Needed…

Downloads
5
Likes
0
Rating
0
P
PrintablesLexie_Eclectic

Webcam Leech

I made this webcam leech to help my husband remember to look into his webcam when speaking during video calls or filming his podcast. The Webcam Leech can be mounted to the top of your Logitech HD Pro C920 webcam and helps you maintain…

Downloads
4
Likes
3
Rating
0
P
PrintablesMolodos

Elegoo Neptune 3 and 4 webcam mount (clip on)

A simple and strong clip on webcam mount for your Elegoo Neptune printer. Supported Printers (please compare the below image for other printers) Elegoo Neptune 3 Pro Elegoo Neptune 4 Elegoo Neptune 4 Pro The printer needs to look like…

Downloads
4,106
Likes
553
Rating
4.93
P
PrintablesVector3dArt

Camera / Webcam Screw - 1/4" - 20 UNC

Camera or webcam mounting screw based on the dimensions of a 1/4" - 20 UNC fitting. Designed to be easy to print, no supports needed and will print at 0.20mm with minimal retractions to help provide a cleaner print. The screw is based on…

Downloads
3,905
Likes
404
Rating
4.97
P
Printablesbhamham

Bongo Cat Monitor Mount, Cute Webcam Kitty Buddy

I was inspired when I saw a similar design online but couldn't find an STL anywhere. I have a job interview today and wanted a way to act happily towards the camera while dealing with the anguish of making eye contact with an inanimate…

Downloads
3,740
Likes
917
Rating
4.72
P
Printablestsuga

Ender 3 S1 Webcam Mount

A simple but effective webcam mount designed specifically for the Ender-3 S1. Simply slides on to the X gantry, no tools or disassembly required. Also included is a threaded knob to match any webcam with a tripod mount (1/4-20 threads).…

Downloads
2,633
Likes
425
Rating
4.85
P
PrintablesVaterabend

Camera mount for Elegoo Neptune 3 and Neptune 4 Pro Plus Max (Display Replacement - Klipper Webcam)

UPDATE The camera mount was working but when there were fast short movements with many direction changes it started to wobble. I added a V2, it doesnt look as nice but it is more stable. If you are into timelapse videos then you…

Downloads
1,648
Likes
217
Rating
5
P
PrintablesFeetOffTheTable

Ender 3 V3 SE / KE Logitech Webcam Camera Mount (C270 or similar)

I have taken ALL of the work out of mounting your Logitech C270 to your Ender 3 V3 SE X-axis. You don't need to do ANYTHING other than have this camera (or camera with similar mount), and this Ender, then just print. No hardware? No…

Downloads
1,258
Likes
136
Rating
4.8
P
Printables3dprintcastle

Ender 3 S1 Pro Webcam Mount Logitech C920

I designed my own webcam mount for my Ender 3 S1 Pro. I wanted the cam drive with the Z-Axis. You can use the holes for different positions and cams. I printed it in black Petg and its worked perferct for me . Hope you enjoy. Today…

Downloads
1,226
Likes
165
Rating
5
P
PrintablesPomi

Logitech C270 Webcam Cover Replacement (with GoPro Mount)

This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…

Downloads
1,224
Likes
187
Rating
4.69
P
PrintablesMLampe

Ender 3 (Pro/V2) Rail Mounted Webcam Stand (The Rocket Side Spool Mount Inspired)

I created a stand for my Logitech C920 that resembles The Rocket Side Spool mount that I am using. It slides into the left side rails of my Ender 3 V2 (should also fit Ender 3/Ender 3 Pro) and has a hole that allows you to screw a 1/4-20…

Downloads
1,143
Likes
145
Rating
4.86
P
PrintablesReven

Webcam cover

This is a simple webcam cover. There are a lot of models on Thingiverse, but i just couldn't find one that printed well and that was usable, so I designed this one. It's easy to print at 0.2mm , works well, has enough surface to fix to…

Downloads
1,138
Likes
135
Rating
4.63
P
PrintablesRacknos

Webcam / Camera Tripod with 1/4" screw

Hi, this is a remix of https://www.printables.com/it/model/132242-zoom-phone-tripod/files for fit my webcam on an adjustable tripod. I've added a ¼" screw on the base. Just print 3 plain legs, 1 ring and 1 base infill 20-30% no support…

Downloads
1,104
Likes
163
Rating
4.79
P
Printablesshailesh

ELEGOO Neptune 4/Pro Z-axis Webcam Mount

Z-axis Webcam Mount for the ELEGOO Neptune 4/Pro 3D Printers. Please use a Tripod Screw to mount the webcam.

Downloads
1,097
Likes
125
Rating
5
P
PrintablesTJL

Webcam Tripod

Updated 2023/11/06 - Added a versions to support a M6-1.00 x 10MM Hex Head Cap Screw Bolts This is a Remix of Tripod Base of the "Zoom Phone Tripod" to allow for the attachment of a 1/4" x 3/4" Stainless Steel Hex Bolt. I first tried the…

Downloads
951
Likes
119
Rating
5
P
Printablesellegamee

Ender 3 V2 Webcam Mount

Simple easy to print webcam holder for Ender 3 v2. The camera and connection to the printer should fit snugly but not impossible to fit. I have created two models each with different properties. The Andersson mount is closer to the middle…

Downloads
842
Likes
91
Rating
4.83
P
Printablesagent47

Skadis Webcam Mount

A Skadis Webcam Mount for webcams with ¼" UNC thread. Print the Screw with 0,1 mm Layerhight, without supports. The mounts are printed with 0,2mm Layerhight and supports.

Downloads
839
Likes
233
Rating
4.75
P
Printablescodysechelski

Logitech c922 Webcam Cover (Slide to Open)

This is a "Slide-to-open" friction-fit webcam cover for the Logitch c922 webcam. It prints in three pieces and "snaps" together. It does not require any glue or other adhesives. It is also sized so that it does not cover the blue…

Downloads
839
Likes
71
Rating
4.9
P
PrintablesIsTim

Elegoo Neptune 3 Webcam mount

This is a simple one piece webcam mount for any printer using 40mm box section frame. It has been tested on the Elegoo Neptune 3 Pro and works well for small webcams with tripod mounts such as the Logitech C615 No supports required. For…

Downloads
817
Likes
118
Rating
4.67
P
PrintablesAJP Prints

Elegoo Neptune 4 Webcam Mount

I made a simple mount for a camera for the Elegoo Neptune 4 and Neptune 4 Pro. It slides into extrusion rails and uses an oversized screw to lock it in place. You will need a screw for the camera which you can find here…

Downloads
808
Likes
80
Rating
4.5
P
Printablessiamigo

Logitech C920 webcam privacy cover

Didn't seem to find a cover for the C920 so made one with inspiration from another user. Recommend using the improved version of the cover which fits better to the camera. Logitech C920 privacy cover improved by siamigo | Download free…

Downloads
807
Likes
75
Rating
4.77
P
PrintablesMarco

Logitech C270 Webcam Halter

Eine Webcam Befestigung für die Logitech C270 Webcam. Es wird keine weitere Schraube benötigt! Erstellt für https://www.printables.com/de/model/3407-articulating-raspberry-pi-camera-mount-for-prusa-m Die auf den Bildern verwendete…

Downloads
795
Likes
150
Rating
4.92
P

Right side Webcam Holder / Mount for Elegoo Neptune 3 and 4 Series (incl. Pro / Plus / Max)

Based on the design (https://www.printables.com/de/model/392102-elegoo-neptune-3-webcam-mount) I made a mirrored version and made the contact surfaces a little thinner for a better fit. Fits the Elegoo Neptune 3 and 4 Series (incl. Pro /…

Downloads
785
Likes
109
Rating
5
P
PrintablesBenHopperAU

Webcam Mounting Bracket for Ender 3 v2

This is a remixed version of the great model made by SilentWoof on thingiverse with a few extra bits included. I've reshaped the main mount body to provide a cleaner look with less sharp corners. The optional ball joint is remixed from…

Downloads
746
Likes
82
Rating
4.86
P
Printablesschiko

Elegoo Neptune 4 (Pro/Plus/Max) WebCam Mount

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … I wanted to mount my webcam Logitech 920 to the Elegoo…

Downloads
673
Likes
107
Rating
5
P
PrintablesJohannes

Webcam Wall Mount

Nice and simple two-axis wall mount for old Logitech webcams for use with octoprint. 3M screws and 3m nuts are used to assemble the wall mount. It's screwed with standard 3,5mm wood screws to the wall. The camera plate is designed to be…

Downloads
670
Likes
144
Rating
4.8
P
Printablesfoorschtbar

Universal Monitor Webcam Spacer/Riser

My Dell P2419HC monitor has a so thin bezel, that my C270 Logitech hides some parts of the display. This tool increase the space between the bezel and the webcam. Probably useable for many other monitors and other webcams. Use the 17mm…

Downloads
663
Likes
76
Rating
5
P

Short Wall Mount for Tapo C200/C210/C220/C201/C202/C211/C212/C222/C230 (TP-Link webcam)

Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…

Downloads
660
Likes
139
Rating
5
P
PrintablesBionicben

VESA webcam arm for tabletop games

Webcam mount for playing tabletop games with my friends remotely. Uses the VESA mounts on the back of most monitors, has compatibility with 100mm or 75mm options. Webcam mount.stl" if you are able to use a screw to attach. The current…

Downloads
648
Likes
127
Rating
4.57
P
Printablesphnxdrgn536

FLSUN V400 Webcam Mount

This is a remix of the "Longer camera holder for FLSUN V400 v3" with an added m6 stud for camera mounts.

Downloads
646
Likes
54
Rating
5
P
Printablesistevene

Webcam mount for ender 3 v2

See the images for the exact model of webcam used unscrew the webcam from the base and screw it to the webcam mount using the included nut remixed from https://www.thingiverse.com/thing:5154496

Downloads
643
Likes
90
Rating
4.67
P
Printablesmathiaspl20

Webcam Monitor Mount

This is a small and tiltable mount to mount a Camera to a Flatscreen monitor. The mount will fit monitors between 14.5 and ~40mm in thickness, as long as the top, front and back are relatively flat surfaces. The mount is just 40 mm wide,…

Downloads
622
Likes
84
Rating
5
P
PrintablesDrR00T90

Sovol SV07 - ISO Webcam Mount with Screws

Since I don't have a Microsoft LiveCam 3000 HD and only a webcam with ISO 1222 / DIN 4503-1 / 1/4-inch camera thread. I couldn't help myself and built this model. It is further away from the print bed and elevated. Two different ISO 1222…

Downloads
602
Likes
45
Rating
4.75
P
Printablesfasteddy

Logitech C615 Webcam Privacy Shutter

This is a hinged privacy shutter for a Logitech C615 webcam. The shutter can be raised when the camera is in use and lowered to ensure (visual) privacy when it is not. The mount features cutouts for the 'in use' LED and microphone, and…

Downloads
592
Likes
22
Rating
4.92
P
PrintablesJason Renaud

neptune 4 plus webcam mount

gantry mounted webcam mount for elegoo neptune 4 plus. requires 2 m4 nuts, bolts and washers

Downloads
588
Likes
69
Rating
5
P
PrintablesmrFenyx

Modular Webcam Mount for Anycubic Kobra 2 / Kobra 2 Pro / Kobra 2 Plus / Kobra 2 Max

This is a camera mount that attaches to the X-Axis of an Anycubic Kobra 2 series printer. This way the camera will always be at the same relative level with the print head. The mount is designed to be modular , allowing the usage of…

Downloads
568
Likes
70
Rating
4.67
P
PrintablesCarquinyolis

Webcam Cover slider

Webcam cover for your laptop or monitor. Slide it to the side to prevent being spies and slide it again to show your face to the rest of the meeting! If it isn't long enough, edit it and extend it so microphone or status led is shown. If…

Downloads
544
Likes
44
Rating
5
P
Printables3DJake

Cam Mount for GoPro / Webcam on the FLSUN V400

We designed a camera mount for the FLSUN V400. There is a Version for the left and the right front profile. The mount can be simply clipped on the profile. Printed on the FLSUN V400! Find it in our shop here:…

Downloads
542
Likes
50
Rating
5
P
Printablesdereksrose

Elongated Snap on MK3/MK3S Camera mount for the Logitech C920 Webcam

I enjoyed this mount but wanted the camera a little further from the print bed. I elongated the arm by 60mm and then also lengthened the mount point so it can accommodate a thumb screw such as this After using this for a while I found…

Downloads
538
Likes
66
Rating
4.6
P
PrintablesDruckbar

Elegoo Neptune 4 Series Webcam Camera Mount C270

Recreation of the left x axis cover with mounting point for a Logitech C270. Had to raise the height of the cover to get enough clearance for the cam. The screw from underneath is a bit fiddly to get in, but it works. I've included the…

Downloads
528
Likes
63
Rating
3
P
Printablesoeil digitale

WebCam Holder Flsun V400

after looking for several models on the internet of webcam holder and finding nothing. I came to the conclusion in modeling one. I printed it with plain PLA in about 70 min with my Flsun v400. I was inspired by this models:…

Downloads
524
Likes
35
Rating
5
P
PrintablesAvise

Logitech C910 Webcam Privacy Cover

I could not find a good privacy cover for the Logitech C910 webcam, so I made my own. This thing is heavily influenced by the excellent C920 privacy cover by OnlyTono . The privacy cover consists of two pieces. The base goes on top of the…

Downloads
503
Likes
23
Rating
4.67
P
PrintablesSquishinStix

Logitech C270 Webcam Mount, Faceplate, and Focus Ring

This is a wall mount specifically designed for the Logitech C270 webcam (with the base removed), a replacement faceplate, and a focus ring to adjust the focus on the fly. The faceplate and focus ring are a remix for my specific use case.…

Downloads
497
Likes
37
Rating
4.67
P
PrintablesBernd

Webcam Halter für Elegoo Neptune 4/4pro

Webcam Halterung für die beispielsweise hier gezeigte Rollei R-Cam 100, die übrigens 100% kompatibel mit fluidd ist und problemlos auf Full-HD läuft. Optimal ausgerichtet zur Düse mit genauer Verfolgung schon von der ersten Schicht. Auch…

Downloads
483
Likes
70
Rating
5
P
PrintablesAtelierGBB

Webcam support for anycubic Kobra 2 Max - Kobra 2 Pro - Kobra 2 Plus

Webcam support for anycubic followed by Z. Simple installation and printing. You will need 2 m3*12 screws, and 6mm x 3mm magnets, or double-sided tape. 6mm x 3mm magnets https://amzn.to/48H9w1R m3*12 screws https://amzn.to/3TQ9C32 Low…

Downloads
483
Likes
68
Rating
5
P
PrintablesNiclas S

Prusa MK4 universal webcam mount

A quick remix of Rokkdaddys awesome mount to use almost every webcam. Just use the camscrew (printed) to mount the webcam onto the holder with the existing G1/4 thread (existing on most webcams). Prints without support. Attaches to the…

Downloads
480
Likes
67
Rating
4.93
P
PrintablesUjang Karnadi

logitech c270 webcam mount vslot 2020

logitech c270 webcam mount vslot 2020

Downloads
466
Likes
53
Rating
5
P
PrintablesRaspberry Pi

Webcam project using an original Apple iSight camera casing with Raspberry Pi hardware

The original project by Max Braun available here used the casing from an Apple iSight webcam, removing the internal parts and replacing them with Raspberry Pi hardware. The software used is no longer operable with the latest Raspberry Pi…

Downloads
462
Likes
66
Rating
0
P
PrintablesLudiusB

2020 Alu extrusion Webcam Mount for AUKEY 1080P Webcam

2020 Aluextrusion Webcam Mount for AUKEY 1080p Webcam Since the Waveshare OV5648 are difficult or expensive to get, I drew a housing for a cheaper variant of a webcam. The AUKEY PC-LM1E 1080p Webcam is a cheap webcam that uses a…

Downloads
456
Likes
132
Rating
5
P
PrintablesBrandoBoard

Ender 3 V3 SE Logitech C922 Webcam mount

No special printing directions other than make sure you print it flat side down and support inside the part where it friction fits onto the x axis rail. I printed the CamScrew-10mm.stl screw made by @Vector3dArt to attach the webcam.…

Downloads
449
Likes
50
Rating
4.83
P
Printableshjzl16

Webcam holder on BenQ Screenbar

This is a small holder to fix webcam (or any other device with standard 1/4" tripod screw) atop of a BenQ ScreenBar. The webcam orientation is adjustable. No fastener needed.

Downloads
444
Likes
48
Rating
4.6
P
PrintablesJomppanen

Logitech C270 Webcam Cover Replacement Remix

I made remix of Logitech C270 webcam cover made by user Pomi. I wanted to use screws to secure the lid to the base and I also made some adjustments to clearances. You will need 2pcs of M3x8mm or M3x10mm screws for the lid. STEP files…

Downloads
437
Likes
62
Rating
5
P
PrintablesEldarius

Simple Webcam Stand

I needed an easy way to mount my webcam at a good height to monitor my prints. So I designed this simple stand to put the camera in a position that would allow a good view between the nozzle and the print bed of my Ender-3. The stand is…

Downloads
437
Likes
36
Rating
4.2
P
PrintablesTJL

Generic WebCam Mount for Ender 3, 3 pro, ect.

This is a Model allows for the Webcam to be attached by use of a 1/4" x 3/4" Stainless Steel Hex Bolt. Rather than disassembling the Webcams to attach it to the mount. It attaches using a friction clip attaching to the Z roller Motor…

Downloads
437
Likes
24
Rating
5
P
PrintablesBBB

Ender-3 V3 KE - Webcam/Camera Mount

This mount utilizes the current M4*10 screws that are used to attached the Display Screen to the side of your printer. You can then add this mount, then attach your desired webcam to it with the ¼ inch screw included in the print.

Downloads
429
Likes
35
Rating
4.67
P
PrintablesFrank WXXX

WebCam holder clamp for Neptune 4 Elegoo (Plus)

A simple but effective webcam holder/clamp for webcam with screw. I made it in FreeCad. Print it in PLA or PETg It's a easy fit… and put some TPU on the bottom plate for grip. (So no tear down of you printer to add it to side rails.)

Downloads
419
Likes
52
Rating
5
P
PrintablesmahatmaJman

Logitech C920 USB Webcam bracket for Voron V slot top mounting

This bracket is designed to allow quick and easy install to hold your C920 webcam securely to your printer frame. The first .stl works well with an acrylic topped printer as it has a step in the base to accommodate the thickness of the…

Downloads
412
Likes
51
Rating
5
P
PrintablesJarda T

Webcam holder for Ender 3 X-axis cover

Webcam holder for Ender 3, which is fixed to the X-axis stepper motor cover. In the plastic cover there is a small cutout on the bottom, where you mount this holder using the included clip. You will need one M3x12 (or longer) screw and…

Downloads
409
Likes
53
Rating
4.75
P
PrintablesPiees

Webcam stand compatible with Logitech Brio

Layer height: 4mm Infill: 10 (or 0) Support: no

Downloads
407
Likes
26
Rating
5
P
PrintablesLaurensGuijt

Webcam wall mount (logitech C922 Pro)

This is a simple wall mount for any webcam with a 1/4 inch tripod hole. You can use a 1/4 inch screw (I used 11.5mm / around 0.5 inch in length) or print your own. Print the mount verticaly so no supports are needed Print Settings Printer…

Downloads
407
Likes
29
Rating
5
P
PrintablesWacky3Dprints

Laptop webcam universal cover

Small clip to cover the webcam of the laptop for security when not using it, you can remove or slide it to a side to use the webcam. Print it over one side (see picture of the piece on the printer bed), so it will have some flexibility to…

Downloads
405
Likes
34
Rating
4.67
P
PrintablesRaspberry Pi

Raspberry Pi Zero 2 webcam mount for V3 and M12 cameras

Front and back plates for housing and partially enclosing Raspberry Pi Zero 2 with V3 and M12 cameras for plug and play webcam webcam software. Requires 12 x M2.5 nylon standoffs, 8 nuts and 8 screws. Check out the full tutorial and blog…

Downloads
405
Likes
60
Rating
0
P
PrintablesSpeedyBP

Halterung für Logitech C920 Webcam am Z-Motor des Prusa i3 MK3S rechts / Mount for Logitech C920 webcam on Prusa i3 MK3S Z motor right

Eine einfache Halterung für die Logitech C920 Webcam am rechten Z-Motor des Prusa i3 MK3S. Zum Anschrauben an den Motor können die Originalschrauben verwendet werden. Die Schraube mit der die Webcam von unten an den Halter geschraubt…

Downloads
402
Likes
68
Rating
5