2,129 models
[ENG] This toy to entertain fidgety fingers in the form of a small switch with the typical "click" sound prints in one piece in about half an hour with standard settings. For successful printing, you need to have the first layer and flow…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Inspired by Russian Fabergé eggs, many of which could open up to reveal a surprise inside. This egg features a maze that must be solved to access the inner compartment. Printing Use a 0.4mm nozzle and a layer height less than 0.2mm There…
Print approx. €10.22–€12.50 excl. taxPreliminary estimate for one variant
[ENG] This toy to entertain fidgety fingers in the form of a small switch with the typical "click" sound prints in one piece in about half an hour with standard settings. For successful printing, you need to have the first layer and flow…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber". It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
[ENG] Simple anti-stress ring. It consists of two separate circles that can be rotated in relation to each other. When turning, a distinct clicking sound can be felt and heard thanks to the triple spring mechanism. There are two versions…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
I liked @SHR3Deu's original model but wanted to reshape the hood and bottom. It still prints without supports. And now the excavator has an exhaust pipe :)
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for one variant
PSA: State of AI : Dragon Egg : With and without Displacement TRIPO used to create : “Cute Baby Dragon hatching from egg, realistic, masterpiece, HDR.” used HD texturing option We have entered a state wherein the use of displacement with…
Print approx. €6.29–€7.68 excl. taxPreliminary estimate for one variant
This remix of https://www.printables.com/model/193429-blunted-folding-knife, removes the punch out / card kit elements to make it even easier and quicker to print.
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's. My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original…
Print approx. €7.00–€8.56 excl. taxPreliminary estimate for one variant
Remix of "Hat Holder" by Bucio.Boi. Simply filled in the screw hole using Tinkercad so it can be mounted with command strips or double-sided tape instead of screws. This avoids having to drill into your wall. No other changes were made to…
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
[En] To make it easier to store my many brushes and save time finding the right one, I've created a pot to hold 28 miniature painting brushes. There's a model to put on a table and another to fix on the Ikea Skådis pegboard. I reused the…
Print approx. €8.80–€10.76 excl. taxPreliminary estimate for one variant
I Remixed The Model for faster print less trash and user without MMU or any other Multicolor Setup
Print approx. €7.39–€9.04 excl. taxPreliminary estimate for one variant
Changing colors between layers is a known and easy to use feature in Prusaslicer. If you want to change filament within one layer you usually need the MMU. But with virtual extruders and some prearrangements in the model and slicer, this…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
I need a simple, small target to set up for the uhltimate disc shooter. It consists of two parts and can be easily assembled. It simply fits together securely, no glue is needed. The two colors can be created with a simple filament change…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
This spinning top prints without support or other special configuration. The three parts can be easy assembled without gluing, simple snap in. And yes, this thing looks like the sign of a German car brand. Print instructions If you like a…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
What is it: It is a super slim case for the Raspberry Pi Pico W microcontroller. The case snaps together. No glue, no fasteners. The no glue part was important because at any point you may want to pop it loose of the case and put it on a…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
This is a gift. I added the Minn Kota logo for the recipient. There's a blank version as well. I used a wide brim on the top files because I didn't want the print to fall over due to a narrow base. I also lined the top of the print…
Print approx. €4.00–€4.89 excl. taxPreliminary estimate for one variant
I have finally developed a model for a very popular wall organizer. Now it can be used without drilling holes in the walls. There are two options available: for top\bottom mounting and for side mounting Plate size is about 58x58 mm for…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
Selector front plate for Prusa MMU2S/3. You can attach PC4-M5 coupling without M5 threaded insert. So, you use this model if you want to change the color of MMU2S/3.
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
As with my other 6 mm scale miniatures I am trying to challenge what is possible with regular FDM printer (Prusa MK4 in my case). This over-weaponized mech is my original creation inspired by grimdark fishfolks and that mech wargame…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
This is a (remix) 2kg spool/filament holder extension, which can be printed without using supports. It fits on the original prusa i3 (mk3/mk4) spool holder. It can also be used in the official prusa enclosure.
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
For everyone that want a cleaner look of the stand. If you like my work consider Buy me a coffee 😊
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
The hamster wheel for my daughters class pet was squeaky and barely held on. Since it's a very small hamster, I did not find any small enough wheels that could hold onto the cage. Hence I've designed something myself. Wheel specifications…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
This is a quick remix, done in PrusaSlicer of the cool model from @JAV3D . Original model with the compartments can be found here: https://www.printables.com/model/695171-print-in-place-scalable-prusa-box
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant
Mk3.5 LCD cover with printable version of the sticker, USB symbol, and reset button. I've noticed the footer gets slightly cut off at certain angles, so the LCD area is slightly expanded compared to the stock R3 version. A 0.25mm nozzle…
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for PETGSource material: PET
For English see below. Dies ist ein LCD-Cover für den MK3.5 auf dem es auch gedruckt wurde. Es handelt sich um einen Mehrfarbendruck ohne MMU. Die notwendigen Farbwechsel werden von Hand vorgenommen, was problemlos möglich ist. Dieses…
Print approx. €1.43–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
A simple post stylized in the form of the flag of Russia. The pendant is designed to be printed in colour in layers (ideally 0.2mm) using a manual filament change (e.g. using the M600 command). The individual colours are printed in…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
A simple patch stylized in the form of the flag of Russia. The patch is designed for colour printing in layers (ideally 0.2mm) using manual filament change (e.g. using the M600 command). The individual colours are printed in sequence: 0.0…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
I noticed on my Core one that you can already see it on the inside wall where you often touch it with the sheet, which unfortunately cannot be avoided. That's why I designed this protective cover, which can be easily attached with…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for PETGSource material: PET
Practical and fast, it allows you to connect several strips together or create simple joints in curves or decorations, the only limit will be your imagination. For their use You will need: Led strips WS2812 1 x fast connector 1 x clip…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
These are fun fidget toys that I made to practice revolution in onshape and to test printing in place. There are two variants of it one with spikes and one without any. You will need supports to keep the balls suspended in the air to make…
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant
Simple patch stylized in the form of the flag of Ukraine. The patch is designed for colour printing in layers (ideally 0.2mm) using manual filament change (e.g. using M600 command). The individual colours are printed in sequence: 0.0 -…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
A simple patch stylized in the form of the flag of the Czech Republic. The patch is designed for colour printing in layers (ideally 0.2mm) using manual filament change (e.g. using the M600 command). The individual colours are printed in…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
A simple post stylized in the form of the flag of the Czech Republic. The pendant is designed for colour printing in layers (ideally 0.2mm) using manual filament change (e.g. using the M600 command). The individual colours are printed in…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
A simple post stylized in the form of the flag of Ukraine. The pendant is designed to be printed in colour in layers (ideally 0.2mm) using a manual filament change (e.g. using the M600 command). The individual colours are printed in…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
In our case we already had a secure nail in the wall where my wife wanted to hang her violin, and did not want to drive two screws or anchors into the sheetrock. I would recommend ensuring that the nail you use is directly into a wall…
Print approx. €4.97–€6.07 excl. taxPreliminary estimate for one variant
If you decide that the appearance of your clock needs to be improved, if you had an accident while printing and the layers shifted (for example, due to a power outage), the foot came off the base a little, or if you ran out of filament…
Print approx. €2.42–€2.95 excl. taxPreliminary estimate for one variant
A simple post stylized in the form of the flag of Poland. The pendant is designed for colour printing in layers (ideally 0.2mm) using manual filament change (e.g. using the M600 command). The individual colours are printed in sequence:…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Description This is a robust and sleek desktop stand specifically designed for the Babyliss Pro 4artist shaver series. Whether you are a professional barber looking to organize your station or a home user wanting to keep your shaver safe…
Print approx. €3.07–€3.75 excl. taxPreliminary estimate for PETGSource material: PET
Hrošík magnetka (Hippo magnet) Velikost magnetu: 10 x 2mm Varianta s vložením magnetu (pauza) a s lepením magnetu (až po tisku) 4 barvy filamentu – světle šedá, růžová, bílá, černá Velikost vrstvy 0,2 – nastavení vložení magnetu a výměny…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
A simple post stylized in the form of the flag of the Netherlands. The pendant is designed to be printed in colour in layers (ideally 0.2mm) using a manual filament change (e.g. using the M600 command). The individual colours are printed…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Simple patch stylized in the form of the flag of Poland. The patch is designed for colour printing in layers (ideally 0.2mm) using manual filament change (e.g. using the M600 command). The individual colours are printed in sequence: 0.0 -…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
This is the same as @MalikDrako_2006414 files except the m3f file has been tweaked to print on a MK3S+. So if you are desperate to print on the MK3S+ use this otherwise use the original after upgrading to the MK3.5. I had a lot of…
Print approx. €5.28–€6.45 excl. taxPreliminary estimate for PETGSource material: PET
A simple patch stylized in the form of the flag of the Netherlands. The patch is designed for colour printing in layers (ideally 0.2mm) using a manual filament change (e.g. using the M600 command). The individual colours are printed in…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Info ------------------------------------------------------------------ This is a rack mount V1 (without an top lid) for the Philips Hue Bridge (V2). I used ShapR3D for modelling. Choose your Version (right or left). Please use 6mm screws…
Print approx. €6.07–€7.42 excl. taxPreliminary estimate for one variant
Remix of LCD cover (for MK3S+) to fit to LCD on model for Hyperpixel 4" Touchscreen + LCD + Raspberry Pi4 (model without power button - see: https://www.prusaprinters.org/cs/prints/70062-hyperpixel-4-touchscreen-lcd-raspberry-pi4-without…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Printing instructions Layers: 0,2 mm Infill: 15% Material: PLA Support: No
Print approx. €4.50–€5.51 excl. taxPreliminary estimate for one variant
Tool for twisting the light bulb into a plasterboard case without imprints. Printed in PETG with supports. OD is 49mm, ID is 43mm. If you need other dimensions, don't hesitate to write me.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
I added some negative volume box to delete extra ledges on the bottom of the shelf. I made also logo separate.
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
Update: Separate body and lid files uploaded This is an update to https://www.printables.com/model/2934-desiccant-container-prusament-filament-spool for ABQJammer on Thingiverse. It is updated so that the internal diameter is now 20mm…
Print approx. €4.72–€5.77 excl. taxPreliminary estimate for PETGSource material: PET
Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-) Main changes - really nice (with big bambu lab logo) and easy print version…
Phone holder universal 28 models. Filament need 10m (0,2mm, 2 perimeters 15% infil). For phones with (max. phone depth 21mm) and without (max. phone depth 9.8mm) cover. A, B, C, D, I, J. K. L, Q, R, S, W, X, Y ……for phones with cover. E,…
This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…
Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly…
Hello there, Full credit to user Rusty__Shackleford for this great model "Angled fore grip mlok AFG M-LOK" I just remixed it by cutting side mount which didn't really worked for me, also took me too much time thinking about good angle for…
This radius gauge allows you to determine the corner radius of parts using a standard caliper . Tested with a Mahr MarCal and a generic low-cost caliper – compatible with most calipers. To calculate the corner radius, multiply the caliper…
1, 3 are covers for boxes 2, 4 are boxes Easy dimensions change. Jars with coil:
Easy printable pencil holder. Size cca 15 x 15 x 12(height)cm. It can be printed without support, because are used max. 45° angles. Filament need cca 50m (0,2mm, 2 wall loops, 15% infill). Tower inside diameter 49mm. Second models:
A hanger combined with a small tray. Two-part design that pressed fit together. No support Needed Print parts one at the time to improve quality. Changes Log: Jan02- Slimmer boat, sail, hook; Print optimization. Jan03- Added a bit more…
Caulking Gun Nozzle Unblocker - without support
Recently I became interested in F1, so I decided to design some tracks with their elevation. They will be available in 4 formats: either with their original elevation scale, 3x and 5x superelevated, or with no elevation. All circuits are…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … If you want to use your A1 (mini) without AMS lite the cable…
Remix of Figurine baby yoda (No base, No parts)
The best way to print the owl is the log in wood filament and the owl in white. In this way, you get Hedwig the owl from HP You will find the owl in 2 versions. The owl directly on the log The owl and the log separately, in that way you…
Here is the next Design from my "Open Drawer" Series. It is a full lenght drawer guide, that does not need any bearings! This Drawer Guide (in Germany its called Vollauszug btw.) uses the smooth surface of the PLA to run smoothly, so you…
SIze cca width 152 ( C,F 172) x depth 60 x height 93mm. Wall depth 3mm. Holes for pencils (C, F) size 16x15,5mm. For papers size 90 x 90mm (use not glued papers). Tested 0,2mm, 2 wall loops, 15% infill. Filament need cca 40-60m. Other…
Organizer Office Compact, easy print without support. Short and Long versions with and without drawer. Size vesion With drawer: Short version lenght x width x height 115 x 103 x 135mm, Long version 155 x 103 x 135mm. Size Without drawer:…
Connecting the small parts with a one-layer-high line. This helps to adhere the small starting surfaces to the bed. Much easier to remove than a brim. Prusa project files are available to customize further.
For detailed information, please check the original model . Please only comment here regarding the missing screw holes; anything else should be commented with the original model here .
I used Blender to remove text from the parts that had it. I've included the original files from the model in case anyone wanted to mix and match parts or if they want to start from scratch. You can read stuff from the original Tic Tac Gun…
This CENTER FINDER lets you draw a line in the exact middle of an edge! With and without ball bearings - M3x8mm screws for fastening down the bearings -608 Ballbrearing Print: PLA PETG
Easy printable without support. Cigarette box case 36 versions 9 sizes in 4 designs for 8 cigarettes sizes Designed for 0,15mm slicing and print. 9 different sizes in 4 versions. Use random seam. Model A…for 10pcs superslim long…
Maturity Good 2 prototypes. In use since 2023/10. Differences to the original I made the handle thicker to be the size of the helix. Then there is no need of support for the handle. I added some select infill for a stronger part. The…
Ich habe nur das Podest entfernt. ------ ENGLISH ------ I have only removed the pedestal. Print Settings: Printer : Bambu Lab X1C Print time : 0 h 59 min. Filament : PLA Filament Brend : Geeetech White Resolution: 0.16 mm Infill: 10% Brim…
I had so much silica gel left for dehumidifying and drew myself a little box. Can be printed completely without support. In the picture you can see the 3 versions from the development. The last one can be seen on the far left. The Fusion…
Two small beer crates to store AA and AAA batteries on the IKEA Skadis perforated plate. Thus, the full batteries are always ready to hand. In the AA beer box fit 12 batteries and in the AAA box fit 20 batteries. Thanks to Jardar K 66 for…
Super Sonic Trophy from Smash Bros for Wii U except without the chaos emeralds or base. Flattened the bases under the feet so it can stand up.
Modified version of the original Measuring tire groove from Lopata_225 . I had a problem with printing the inner part that needs supports. Therefore, I modified the model so this part does not need supports and could be printed with the…
EDIT ------------------------------------------------------- 2023.08.10. On request from Chris Ondrovic added frame parts without side ventilation (holes only on front side) 2023.03.26. Added STL for Alu profiles caps. Printed from…
This is a remix from Bridal Floral Tiara by Lorenz Nimmervoll , cater for easier print without any support. This require remove of the extreme overhand >45degree side curl. Added a tear-drop pearl, enlarge the whole tiara for grownup head…
Important! This version is obsolete , please use the new Hydra available on the page below, it has an updated design with removable/reversible spool guides as well as PTFE tubes replaceble from top: Hydra AMS Notice! This is only…
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
The original model from @sraj had these both sizes of boxes, but the biggest one was presented only with internal dividers. I needed it without the divider, so I needed to remix it for myself. Boxes are simple, versatile and perfectly…
Chikorita pot, in two versions: with or without drainage hole. Modified to be a flower pot from a model downloaded from the internet. Macetero de Chikorita, en dos versiones: con o sin agujero de drenaje. Modificado para ser macetero a…
Small tractor with freely rotating wheels printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly calibrated (to prevent…
This is an remix of a pair of handcuffs, desingned by sthone. ( https://www.thingiverse.com/thing:2487050 ) For the finished handcuffs you'll need 10 'Handcuff_Pin.STL' to hold everything together. A small hammer or vice can be helpful.…
Pencil stand easy printable 10 versions.
This is my first upload (please be kind) a model of a build plate holder i designed for 5 plates in Solidworks and printed it on my Bambu X1 Carbon in PLA. It fits the all the Bambu plates PEI, textured etc. It also fits the Prusa (MK3s+)…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
There are a few options with this one, mainly due to requests and iterations. there is an option with and without the hinge. there is a v1 and a v2 of each as I didn't like the wobble on the plates. and there is also an option to have one…
[ENG] Simple model of a Christmas tractor with Coca Cola trailer. The model is available in two sizes: basic (16mm width), which should be printed in one piece and then the articulated joint can be gently disassembled (it is equipped with…
Caulking Gun Nozzle Unblocker / Nettoyeur canule cartouche silicone
Shrimp tubes that provides a place for shrimps to hide in an aquarium (also a suitable hiding place for fry). Print instructions Two files available: -With feet, allows you to secure the tubes into the substrate (infill 10-15%) -Without…
Easy printable. It can be printed without support. Size big version lenght x width x height 106 x 86 x111mm. Filament need (big version) cca 52m (0,2mm, 2 wall loops, 15% infill). In 4 versions with and without cards holder and in big and…
Litophane frame from BambuLab without the Bambu logo on the top site.
Diameters 55, 75, 100, 120mm, height 50, 75, 100, 130, 160, 190mm. Walls thickness 2.5mm. Tested PLA 0,2mm random seam. Jars without coil:
[ENG] A small Bobcat with freely rotating wheels and a moving shovel printed in one piece. It is printed in the "on its side" position so there is no need to add supports. For functional printing, the first layer and flow must be properly…
This model is compatible with the lego system.
Organizer Office Compact, printable without support. Size lenght x width x hight 115 (145-C, E) x 103 x 95mm. Use not glued papers 90x90mm. Holes for pencils (E2,3) cca 13,4x13,4mm. C and E are long versions. Wall depth Base 5mm, inserts…
Just a quick remix: A clean armor chest - without the 13. So you can easily put your own sign or letter on it, for example with Prusa Slicer oder BambuStudio… Have fun!
![Pi PICO-W Slim Case [SNAPS TOGETHER - no glue] (with and without headers)](https://media.printables.com/media/prints/385457/images/3229748_ab46d5e6-982d-4b10-a173-4fe5264d163a/2.png)
