Search results: wrenc

Sort order

3,266 models

P
PrintablesRaegin

Wrench for Logitech G27, G29, G920, G923 racing wheel

Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant

Downloads
1,652
Likes
239
Rating
5
P
Printablessh

🔧 12mm Sink faucet wrench (kitchen/bathroom)

Info: wrench for badly accessible nuts under the sink long handle (14cm) wrench/nut 12mm for threaded rod up to 8,2mm (which fits inside the wrench middle hole) remixed original (thx volkhen !), because i needed: different nut size longer…

Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
396
Likes
90
Rating
5
P
PrintablesZeroCircle

Nextruder nozzle wrench to fit IBNobodys heatblock clamp.

I noticed that the wrench with chamfers is very close to fitting IBnobodys heatblock clamp so i remoxed the STL to make

Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant

Downloads
320
Likes
56
Rating
4.95
P
PrintablesV3ctor Design

Aeropress Wrench

A little tool to help removing an overtightened filter holder, or just to be used on a regular basis. Print settings (~1h 25m): - no support - with a 0.4 nozzle - set to 0.6 line width - 0.28 line height - 2 walls - 100% infill (/20%…

Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant

Downloads
302
Likes
56
Rating
5
P
PrintablesDanB

Lee Die Nut Wrench Rev2

The is a wrench used to tighten or loosen the nut on reloading dies with a 1-1/8" nut.

Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
221
Likes
28
Rating
5
P
PrintablesEli

Oil Filter Wrench (15 flute, 75.1mm OD)

I made this model to remove SuperTech ST3614 oil filters which have 15 flutes and a 75.1mm outer diameter. This filter is a rebranded Champ Labs PH2835. When loosening a used filter, the oil will run down the outside of the filter,…

Print approx. €4.16–€5.09 excl. taxPreliminary estimate for one variant

Downloads
183
Likes
22
Rating
4
P
PrintablesCaleb Galvas

5mm Door dogging key/Allen Wrench

5mm hex key/allen wrench for locking and unlocking or dogging and undogging pushbars on doors. At least that what I needed. Maybe you just need a 5mm allen key on a keychain. Who am I to judge. If you're using this for doors, there are…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant

Downloads
176
Likes
9
Rating
5
P
PrintablesStipa

Overcomplicated Variable Torque Wrench Ratchet

REMEMBER: do not leave torque wrench in preload state. Always unscrew cap to 0 position or below when not in use. It is usual practice using torque wrenches. UPDATE 2020-04-19 added more constant and variable thicknes springs. As most of…

Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
158
Likes
69
Rating
0
P
PrintablesTronnic

Wrench / Schlüssel for Dumbbell Star Nut / Hantel Stern Verschluss 30 mm

Wrench for tightening / loosening star locks for your dumbbells / barbells. I usually can't get them tight enough and they come loose after a few reps. With this wrench you can tighten them much better. See Picture 3 for Dimensions. I…

Print approx. €14.23–€17.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
110
Likes
18
Rating
5
P
Printablesschmi

Wrench holder for 38mm x 38mm perforated wall

The holder fits perforated plates with a size of the holes (squares) of 10x10mm and a distance of 38mm. However, it can easily be adjusted for other hole spacing by adjusting the holder.

Print approx. €7.01–€8.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
60
Likes
11
Rating
0
P
PrintablesWhaleshark

Flair58 Piston Alignment Wrench

I needed a tool to re-align the piston on my Flair58 espresso maker. Over time the piston rotates CCW in the cylinder and eventually causes the unit to fail as the valve assembly will pull free during operation. The piston can be removed…

Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
3
Rating
0

Baikal IŽ 27 choke wrench / key

Choke replacement key for Baikal IZ 27 shotgun

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
2
Rating
0
P
PrintablesA_R_B

Torque Wrench Handles from 1.0Nm up to 3.0Nm

Low torques are necessary for many applications, such as carbon parts on mountain bikes or screw connections on electronic and robotic devices. But the usual torque wrenches works reliably only at 4 or 5 Newton meters and above. Fixed…

Downloads
8,898
Likes
3,101
Rating
4.77
P
PrintablesLumanieri

The Original R.E.P Ratchet Wrench - 1/4" Hex Bit Ratchet Wrench Tool and FIDGET TOY!!!

Hello. This is the R.E.P Ratchet tool. It stand for Rapid Prototyped, Exposed Design & Pocket Sized Hex Driver Bit Ratchet Tool. This is a fast and practical, printed ratcheting ¼" hex driver!!! It is HEAVY DUTY and tested, with an…

Downloads
8,519
Likes
2,173
Rating
4.83
P
PrintablesAutoCode3D

TrackTwist socket holder organizer 3/4" 1/2" 3/8" 1/4" drive SAE METRIC gridfinity V2 Wrench and tool organizer

Updates updated rails to be .5mm shorter for gridfinity and for tighter magnet fitting 24.6mm and 2.8mm deep. added V-style holder for ratchets and large extensions 8/17/2024 3-4 inch drive tool and socket holder and washers 2/18/2024…

Downloads
7,591
Likes
1,818
Rating
4.92
P
PrintablesManuel

NOZZLE WRENCH

Insert holder for 7mm socket wrench ideal for unscrewing the printer nozzle…

Downloads
6,017
Likes
2,210
Rating
4.94
P
PrintablesDJ

Inch Measuring Tool for Screws, Nuts, Bolt Heads, Wrenches (incl. Hex.), Threads (No metric tool)

I found a high number of measuring tools for metric screws. But what about a measuring tool for inch screws, nuts and wrenches? I couldn't find any, so I created one, or better two :-) The tool is created for UNC and UNF threads and…

Downloads
5,299
Likes
2,437
Rating
4.93
P
Printablesjedisct1

Nextruder nozzle wrench for Prusa MK4, Core One and XL

On the Prusa MK4, nozzles can be cold swapped. The procedure is actually far easier, faster and likely safer than removing the heat block as originally documented. After having cleaned your nozzle as documented (heat at 250 degrees for 5…

Downloads
4,940
Likes
1,015
Rating
4.96
P
PrintablesChileo

Schraubenschlüsselhalter / Open-end wrench holder

GERMAN Wandhalterung für 8er oder 12er Schraubenschlüsselset. Details der Masse, siehe Bilder. Erstellt für Ayce Gabelschlüsselset 8-teilig. Erstellt für LUX Gabelschlüsselset 12-teilig. ENGLISH Wallmount for 8 or 12 open-end wrenches.…

Downloads
4,722
Likes
454
Rating
4.93
P
PrintablesParsupo

wrench holder (wrench organizer)

This is a wrench holder for inside a toolbox or tool trolley. It can hold wrenches from (metric) size 5.5 up to 24.

Downloads
4,668
Likes
534
Rating
4.43

Fully assembled 3D printable wrench

After watching the infamous video from a few years back where Z-Corp prints a fully working wrench i decided i wanted to do the same thing on my own printer. Now, i am not talking about a "print-several-pieces-and-then-assemble" version…

Downloads
3,954
Likes
232
Rating
4.74
P
PrintablesG.design

Nozzle torque wrench

ATTENTION!! Always keep in mind that the generate torque will slightly varies depending on the used filament brand. The original piece was printed with Prusament PETG Galaxy Black, so a filament with similar or better quality should…

Downloads
3,607
Likes
916
Rating
4.91
P
PrintablesAudacity Micro

Gridfinity 10 Piece Wrench Sorter

Holds 10 wrenches. Designed for a 20 Piece wrench set. Should fit just about any wrench. Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license.…

Downloads
3,205
Likes
416
Rating
4.81
P
PrintablesViosDesigns

Gridfinity Wrench Holder System

Gridfinity Wrench Holders designed to hold full sets of Metric and SAE Wrenches. The metric wrenches are inversed to fit into a standard tool drawer. Mirror the files to get both sides. Printed in PLA+ Nozzle 0.4 Height 0.2 Infill 15%

Downloads
3,189
Likes
574
Rating
4.91
P
PrintablesUncleFrankSays

UFS-094 More T-Handle Hex Allen Key Wrench

Update Late Feb 2024: We had far too many wrenches on the bench, so we designed this new Allen wrench holder for all nine sizes. https://www.printables.com/model/776625-ufs-155-t-handle-hex-key-holder-allen-wrench-holde . Stop by and…

Downloads
2,952
Likes
551
Rating
4.94
P
PrintablesGorgoton

Combination Wrench Organizer Set

My design is inspire by the nice model from Andeker (thingiverse). His design was too long to fit in my toolbox so I remixed it from scratch. The main difference is that the distance between each wrench is shorter. My toolbox drawer is…

Downloads
2,408
Likes
330
Rating
4.8
P
PrintablesFantomas

MC4 & EVO2 PV solar wrench (spanner)

ebay note: A 3D print of this this model is currently illegally sold @ https://www.ebay.ie/itm/314569335395 /314580358088 /314673977931 PV tool for use with both MC4 and EVO2 style solar connectors. ⚠WARNING⚠ Tool was design based on…

Downloads
2,352
Likes
133
Rating
5
P

Wrench Rack

This is the Wrench Rack! This is by far the best and easiest way I've found to organize combination wrenches in your toolbox. These are all just variations on a similar theme.

Downloads
2,324
Likes
1,004
Rating
4.33
P
PrintablesDiggle

Print-in-Place Adjustable Wrench

Slot in the back for a 60x10x3 bar magnet . No supports needed. Simply break off the included support pieces

Downloads
2,294
Likes
216
Rating
4.8
P
Printablesstevehlau

SR Suntour Fork Wrench

I need to service my fork recently and I found this ( https://www.thingiverse.com/thing:883685 ) on Thingiverse, so I print it out and unfortunately; it is too big and it does not fit my cheap shock. SAD... I then fire up my trusty CAD…

Downloads
2,216
Likes
148
Rating
5
P
PrintablesjohnyHV

esp32-cam OV2640 focus adjustment wrench

I'm adding a tool for fine-tuning the focus of the OV2640 camera module. Currently, I have designed a bracket only for the first 3 commonly used lenses for the OV2640. Support for OV8225 camera lenses will be added in the future. WARNING!…

Downloads
2,202
Likes
99
Rating
4.69
P
PrintablesMany24

IKEA Skadis - Wrench holder / Držák na klíče

Simple 2 piece holder for up to 8 wrenches, in my case for 6 - 22mm. There are 2 models, each with different hook position - offset by 20mm. This means you can put them in any column of holes on the Skadis board, depending on lenght of…

Downloads
2,130
Likes
408
Rating
5
P
PrintablesStenly_G

Wrench set - 8mm-19mm

A complete set of 3D printed open-end and ring wrenches ranging in size from 8mm to 19mm. Each wrench is modeled with realistic proportions and fine surface detail - perfect as a decorative item, workshop display, or dimensional reference…

Downloads
2,113
Likes
455
Rating
4.82
P
Printablesprntmkr

Bit Wrench Tool - Strong grip

Intro This is a super helpful bit wrench tool! Try it! You will love it! PS: The tool was designed to hold the bit rather tight - it will get worn out when you use it a couple times. Use pliers or a thin nail (opening on the top) to get…

Downloads
2,107
Likes
779
Rating
4.92
P
PrintablesDJ

Metric Measuring Tool for Screws, Nuts, Bolt Heads, Wrenches (incl. Hex.), Threads

I have been asked to create a measuring tool similar to my “Inch Measuring Tool” https://www.printables.com/de/model/345844-inch-measuring-tool-for-screws-nuts-bolt-heads-wre So here it is! The dimensions are based on ISO DIN 13. (I will…

Downloads
2,048
Likes
461
Rating
4.92
P
PrintablesGlue Man

Modular Wrench Holder

Wrench holders slide together. I included pieces with 3 peaks and 1 peak if you need different lengths. There are also front and back pieces that only have the attachment points on one side. The magnets I used were 10x3mm magnets from…

Downloads
1,902
Likes
746
Rating
5
P
Printablesgwendal

peg board wrench holder

Mashup of 2 designs: Customizable Wrench Holder Peg board screwdriver holder Allow storing wrench perpendicular to the peg boards, saving a lot of space.

Downloads
1,862
Likes
309
Rating
4.89
P
PrintablesOndra7

Height adjustable leg with wrench adjust

Adjustable leg for your furniture or shelves. The holes for attachment are 4mm in diameter. The height of the foot is possible from 7 to 12 cm. The leg is adjustable even after loading with a 25mm wrench.

Downloads
1,834
Likes
1,168
Rating
5
P
Printablesjonathon717

Tool Organizer - Shop Tools - Files - Cutters - Wrenches

Another basic tool organizer. Works great for deburring tools, small wrenches, screw drivers, glue sticks. You name it. The 200x100 size fits well in a lot of standard Kennedy, Craftsman, and other tool boxes. I printed mine in PLA. Any…

Downloads
1,831
Likes
279
Rating
5
P
PrintablesAudacity Micro

Gridfinity Pliers and Wrench Holder

Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license. My other Gridfinity Designs: 1/8" Endmill Holder:…

Downloads
1,680
Likes
247
Rating
5
P
PrintablesMichal Fanta

The Lens Filter Wrench Set

Set of keys to enable filters for camera lenses. 44mm - 52mm 55mm - 62mm 58mm - 67mm 62mm - 77mm 72mm - 82mm 77mm - 86mm 82mm - 95mm Print instructions STL: https://www.myminifactory.com/object/3d-print-lens-filter-wrench-set-52771

Downloads
1,646
Likes
224
Rating
4.94
P
Printablesericman314

Adjustable Pipe Wrench

Pipe burst and water spraying out all over the floor? Don't call a plumber, simply download the attached STL files, and in just six short hours you can fix your own leaky pipes with this quality wrench constructed of super tough and…

Downloads
1,580
Likes
182
Rating
4.95
P
PrintablesEd

"The Lamprey" Soda Bottle Cap Wrench

Introducing “The Lamprey”, a soda-bottle-cap-opening wrench! Originally made as an accessibility aid for people with arthritis or other grip issues. The design affords three hand positions - right up by the cap, in the middle of the…

Downloads
1,498
Likes
422
Rating
4.7

Marked Modular Magnetic Wrench Holders

Last Update: 2024-20-03, Updated files for 11/32 SAE Wrench Holder, previously there was a very rarely provided 7/32 SAE Wrench, I have left this in the STL files but removed from the 3D Model Files. I also corrected incorrectly…

Downloads
1,419
Likes
172
Rating
5
P
PrintablesNautilus Forge

IKEA SKADIS - Ratchet / Socket Wrench organizer + tools

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Downloads
1,414
Likes
243
Rating
4.55
P
Printablestlisek

Removable Multiboard Allen Key / Hex Wrench Holder

A simple allen key holder for multiboard . Sizes: 10, 8, 6, 5, 4, 3, 2.5, 2, 1.5 mm. Comes in two versions: with engraved (debossed) and embossed text Attaches using anti-rotate multiconnect so you can quickly remove it from the…

Downloads
1,411
Likes
182
Rating
4.93
P
PrintablesAlex R

Improved Allen Wrench / Hex Key Holder

Allen wrench holder with some improvements: Will not wear out, holds hex keys in with an o-ring, not tension in the plastic All Allen wrenches equally accessible 3D printable Uses a standard o-ring available at most any hardware stores…

Downloads
1,407
Likes
157
Rating
4.89
P
PrintablesBamBam Design

Threading Tool - Tap Wrench

Threading Tool Handle A handy tool for cut and recut threads. It should fit square shaft from M2-M10 thread cutter (most inch thread as well). The square shank holders are graduated 0.5mm in one single tool. Insert 2,5-4,5mm square shaft…

Downloads
1,381
Likes
378
Rating
4.85
P
PrintablesDaniel

Kids Toy: Wrench (Spanner) and Bolt Box

This is a box I designed for my kids to have fun with and practice their wrenching skills so someday they can do it for real. I tried to design everything to be as realistic as possible. The bolts are designed to look realistic, but they…

Downloads
1,371
Likes
308
Rating
4.94

Wrench holder, HSW

A remix to mount the holder on a Honeycomb storage wall and less material. You need 2 M3 inserts and 2 M3x12mm screws.

Downloads
1,335
Likes
216
Rating
4.91
P
PrintablesAlmightyFireFly

Wrench, Plier, & Scissor Organizer

I couldn't find a simple adjustable plier and wrench organizer so I designed this. It is very versatile and works well with most tool box drawers. The parts are simple and print very quickly. The height of the dividers can be scaled as…

Downloads
1,209
Likes
224
Rating
4.93
P
Printablesdkshepp

AR-15 Castle Nut Wrench

AR-15 Castly Nut Wrench

Downloads
1,142
Likes
96
Rating
3.83
P
PrintablesEclsnowman

Metric Allen Wrench Holder

At work we use allen wrenches (hex keys) a lot for machine assembly. The problem is people keep borrowing my allen wrench sets as we work on machines together. My work provides bulk bondhus allen keys to people so they don't use worn out…

Downloads
1,124
Likes
126
Rating
5
P
PrintablesVitaly

Wrench Holder

Metric Wrench holder for 6mm - 15mm wrenches. Version with raised letters - to colour with a pen or print with a different colour. Version without letter - you can write your own letters/numbers/symbols. Base size of holder - 40x230mm…

Downloads
1,122
Likes
333
Rating
5
P
PrintablesBenBreaksThings

Gridfinity Wera Hex Wrench Organizer; no magnets

Within the gridfinity system there are those that like having magnets and those that do not. Remixed because I remove magnets from all models prior to printing them for myself and figure someone else out there may be of the same ilk.

Downloads
1,085
Likes
266
Rating
4.17
P
PrintablesWill

Allen key / hex wrench T-handles sizes 1.5mm - 4mm

I have tried a few designs of allen key handles and many of them try to be as generic as possible, resulting in the tool being loose in the handle. I've tightened up the gap for the allen key. I have also reduced the number of 3d printed…

Downloads
1,085
Likes
132
Rating
5
P
Printablessorenrandum

M3 wrench

For assembling all the small parts one gets when 3D printing, a little wrench which can be used for M3 sized nuts.

Downloads
1,048
Likes
51
Rating
4.83
P
PrintablesPBCreations

Wrench

I made it out of TPU as a joke but it is functional when made with a solid material! *This is not an original model, it is a remix of a model published on another website by 3DPrinted *

Downloads
972
Likes
65
Rating
4.75
P
PrintablesMitaccio

Kobalt Combination Wrench Holder - Gridfinity

I designed a combination wrench holder after struggling to find one I liked. This is based on a generic wrench holder that gradually increased in wrench size and depth. I used a 3x5 Gridfinity base for the 13 wrench holder and a 3x4 for…

Downloads
970
Likes
118
Rating
4.5
P
PrintablesWouter de Vries

IKEA Skadis Wrench holder (12pc.)

Holder for 12 wrenches for ikea skadis system.

Downloads
944
Likes
106
Rating
4.96
P
Printablesdisney7

Craftsman Raised Panel Wrench Organizer LoserKid418 Remix

Thanks to LoserKid418 for adding access to the OnShape object for his original design! I'm in the process of learning Fusion 360, so I used his original object as a reference to remake it in F360. This is the first thing I've created in…

Downloads
942
Likes
121
Rating
4.67
P
PrintablesChoiceCityMoto

NASA Wrench

This isn't the first 3D-printed object made in space, but it is the first created to meet the needs of an astronaut. When International Space Station Commander Barry Wilmore needed a wrench, NASA knew just what to do. They "e-mailed" him…

Downloads
941
Likes
100
Rating
4.79
P
PrintablesFLX Factory

Multiboard Hex Key / Allen Wrench Holder (Metric)

This is a complete Metric Hex Key Set Holder designed for Multiboard using the SlideCleat for Multiboard Connector . For installation you'll need to thread two SlideCleat Connectors into your multiboard tiles and simply slide this Hex Key…

Downloads
938
Likes
89
Rating
4.29
P
PrintablesKameo

Qidi plus 4 bed adjustment wrench

It's a simple tool to help fine-tune the bed leveling.

Downloads
924
Likes
95
Rating
5
P
PrintablesSaddamCZ

Allen wrench holder for pegboards

NOTE: Use of the first STL (v2.0) is recommended, more info in the update notes below Pegboard holder for a set of 9 Allen keys / Hex wrenches / Inbus wrenches. Designed for sizes 1.5–10 mm (common Wera sets). Pegs on the back are for 25…

Downloads
924
Likes
142
Rating
4.5
P
PrintablesGot2b3d - Oxana
Downloads
910
Likes
195
Rating
4.89
P
Printablessivadnivek24

Wrench Holder

Universal Wrench holder that can hold wrenches in any orientation metric or standard. Mount it anywhere with two screws. Smallest to largest, left to right or right to left.

Downloads
900
Likes
149
Rating
5
P
PrintablesRockChalkAZ

Premium Enfit Wrench

This is a high quality wrench to help take off en-fit connectors. It's been carefully sized and tested on Infinity pump sets and Farrell sets.

Downloads
896
Likes
58
Rating
5
P
PrintablesTeque5

SMA Thumb Wrench Library

SMA is one of the most common coaxial RF connectors and I happen to use them all the time. The wrench dimension is 5/16", which is almost 8mm. The spec usually calls for 4 to 8 in-lbs of torque for these connectors, which is about as…

Downloads
890
Likes
107
Rating
4.86
P
Printablesabeaulieu

Combo Wrench Holder Set (Pegboard compatible)

Intro If you're cursed enough to live in North America, you need two wrench sets. I like the ideas of having both sets arranged in some kind of symmetrical fashion on my wall as in the picture (therefore resulting on asymmetric holders).…

Downloads
887
Likes
128
Rating
4.88
P
Printablesrace85com

HSW Allen Hex Key Wrench holder for Honeycomb Storage Wall

use with blank insert_hollow from the original HSW board 8 slots for max size 6mm, hole diameters: 7,7,5,5,5,3,3,3mm Check out my collection of HSW attachments here :) Printing instructions: no supports, print flat on surface use 4…

Downloads
887
Likes
155
Rating
5
P
PrintablesMelissa14850

Metric Wrench Holder

Metric wrench holder for Craftsman wrenches from 6 mm to 17 mm. The holder screws into a French cleat (or other holder) with two screws. The recessed lettering in the pictured print was filled with yellow fingernail polish. I used a 0.15…

Downloads
869
Likes
104
Rating
5
P
PrintablesBoski

HydroJug Lid Wrench

HydroJug Lid Wrench – Flip Straw Model (40oz Traveler / Classic) This is a 3D printable wrench designed specifically to fit around the HydroJug flip-straw lid, making it easier to tighten or loosen the cap without straining your hand. The…

Downloads
857
Likes
23
Rating
0
P
PrintablesJ-3d

Spanner / Wrench pegboard holder & wall mounted version (New expansion bracket added for imperial SAE sets)

This is a pegboard mounted spanner/wrench mount. It's made to fit one of these ( https://www.amazon.co.uk/gp/product/B003BV77T2/ You may need to copy-paste the link) sets or it's equivalents. There's both a pegboard mounted version in the…

Downloads
850
Likes
111
Rating
4.88
P
PrintablesJeremyKMac

Tool/Wrench Organizer

A simple modular tool organizer for any toolbox. Dividers clip onto 1/4" steel rods (or something similar). The design includes blank dividers and interchangeable labeled dividers. The labels and clip are designed to be printed on a…

Downloads
844
Likes
563
Rating
5
P
Printablesterablast

Holder for CORE One Nozzle Replacement Tool and Nozzle Wrench (Skadis/Magnets)

A simple holder to store the CORE One nozzle replacement tool as well as a nozzle wrench! (Fits both the “No sock” and “Sock” versions of the CORE One nozzle replacement tool) Attaches to a IKEA Skadis pegboard or to anything…

Downloads
842
Likes
271
Rating
5
P
PrintablesShopTeacher

T-Handles (SAE & Metric) for Allen Hex Wrench Key (25 Sizes)

Summary: Allen Wrench, Allen Key, Hex Wrench, Hex Key…. Whatever you call them, these are the T-Handles for them. The following sizes are available: Metric: 1.5mm 2mm 2.5mm 3mm 4mm 4.5mm 5mm 5.5mm 6mm 7mm 8mm 10mm SAE: 0.050" 1/16" 5/64"…

Downloads
841
Likes
141
Rating
5
P
PrintablesSophie

Plier / Wrench Organizer

If you like this model and use it please upload a like, it really helps others find it! I wanted to have my pliers up on edge so they could better fit in my toolbox, and after looking at commercial options such as…

Downloads
830
Likes
117
Rating
4.5
P
PrintablesGroenPrint

Spanner - Wrench set 8x

Set of wrenches/spanners with the sizes: 6 - 7 8 - 9 10 - 11 12 - 13 14 - 15 16 - 17 18 - 19 20 - 21 Print settings: Layer: 0.25mm Draft or 0.28mm Superdraft Infill: 25% Nozzle: 0.4mm Filament: Esun PLA+ (PETG should work as well)…

Downloads
813
Likes
69
Rating
4.25
P
PrintablesBunkerotter

Nextruder nozzle wrench V2

Original description: On the Prusa MK4, nozzles can be cold swapped. The procedure is actually far easier, faster and likely safer than removing the heat block as originally documented. After having cleaned your nozzle as documented…

Downloads
800
Likes
114
Rating
4.81
P
PrintablesSteveS42

Soda Bottle Cap Wrench

These are the settings for a wrench to open Dr. Pepper bottle caps (and most likely many other brands). diameterB: 31.1 toothCountB: 24 toothHeightB: 0.7 toothWidthBottomB: 2.3 toothWidthTopB: 0.7 toothCurveB: false ringThicknessB: 2…

Downloads
799
Likes
247
Rating
5
P
Printablesslippinjimmy

Gridfinity Organizer for Tekton Wrenches

Tekton Metric & SAE Wrenches Metric: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 SAE: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 https://www.amazon.com/dp/B00OXUPFDU 6mm x 2mm magnets…

Downloads
794
Likes
222
Rating
5
P
Printables3Dessa

Wrench Keychain

Simple printing, doesn't need many settings, I just used 0.2 layer height. I also used an ironing on the top to make the finish better.

Downloads
793
Likes
62
Rating
5
P
PrintablesSerkan ASAR

Dremel Wrench

Hi Everybody I designed a removable handle for dremel wrench. In order to make it identical, easy to see arround and not to loose it. I added logo. For printing logo i attached every file you may need. Also, There 2 each different body i…

Downloads
785
Likes
264
Rating
5
P
PrintablesRC builder

Hex key wrenches holder for Dillon 650/750

A simple hex key wrenches holder, attachable to case collator rod. Use M4 bolt + nut for clamp. Print instructions No supports, no brim, any layer thickness will do, infill 20 - 25%.

Downloads
780
Likes
57
Rating
5
P
PrintablesWillyCKH

The Ultimate Metric Fastener and Wrench Kit - Hex Heads

Sometimes it is hard to find the right fastener for your project, so here's a kit for you! This kit contains hex head metric bolts, nuts, washers for M5, M6, M8, M10, M12 and M16! Not only you can print some fasteners for your projects,…

Downloads
779
Likes
102
Rating
5
P
PrintablesTJ78

wrench holder (wrench organizer) wallmount print-in-place

The perfect piece for the workshop to keep everything neatly organized. I recommend 3 perimeters, 6 top and bottom layer at a layer height of 0.2 mm and 15% Gyorid infill. Feel free to check out all my little gadgets for the workshop.

Downloads
774
Likes
93
Rating
5
P
Printablesslayernine

IKEA Faucet Aerator Removal Tool (wrench)

My IKEA faucet aerators needed to be cleaned and I could not get them open so I remixed two designs into a better one. Both designs were much too fragile so I strengthened them as much as possible given the tolerences of the aerator. That…

Downloads
768
Likes
63
Rating
5
P
PrintablesCircleofOwls

Jolly Wrencher

This is a simple mashup of Jimson's simple Human Skull and Armin's Wrench fused in PrusaSlicer. All credit goes to the original modelers. Please respect their licensing restrictions. I use it as a fun "under construction/under repair/do…

Downloads
762
Likes
156
Rating
5
P
PrintablesTom

KuKirin G2 Master suspension wrench

There is a small torx screw in the adjusting nut that needs to be removed first. In my case the screw was hiding in the back of the nut so I had to use a bit of force to loosen the nut so the screw would show up. I printed it with 4…

Downloads
758
Likes
48
Rating
0
P
PrintablesTeasleyPrint

Plier / Wrench Organizer with 249.5mm Version

Cut out some of the material and still dont have to use supports if you lay it down, also made a 249.5mm version Print instructions Category: Tool Holders & Boxes Summary Cut out some of the material and still dont have to use supports if…

Downloads
756
Likes
86
Rating
5
P
PrintablesStranula

Multiboard - Crescent Wrench Holder - Single and Dual - Screw In Place

I wasn't satisfied with any of the cresent wrench holders that were out there and wanted to make one of my own for the multiboard and also have it screw in instead of a snap. I want to always keep my designs free for anyone who wants to…

Downloads
749
Likes
75
Rating
5
P
Printablesduckjerkdan

Customizable Wrench Organizer

This is a fully customizable wrench organizer. I have included a Fusion 360 file that includes parameters to adjust the number of slots and the width of each end.

Downloads
740
Likes
98
Rating
5
P
PrintablesGorto

SMA Wrench

Wrench for tightening SMA connector

Downloads
737
Likes
47
Rating
4.29
P
PrintablesTimid Possum

Oxygen Tank Wrench, Keys, and Knobs or Handles

Several designs of a shut-off valve for medicinal oxygen tanks or any tank with a similar mechanism. You can leave them attached to the tank for a semi-permanent shutoff mechanism.

Downloads
736
Likes
50
Rating
5
P
PrintablesBonwit

Wrench Holder

I found that "Tymbo13's" holder, remixed by "Jvince" was the best wrench holder out there for my needs. Jvince's added the white lettering, which is really useful, and looks great. However, I (unfortunately) don't own an Prusa MM 2. I…

Downloads
718
Likes
159
Rating
4
P
Printablesso meone

esp32-cam OV2640 focus adjustment wrench tool

Make sure the cam is mounted securely before using to the avoid risk of tearing the flatflex. Contrary to other designs the grabbing teeth have a tiny angle to them, they get thicker in the middle. This allows for slight off-center usage…

Downloads
717
Likes
49
Rating
4.89
P
PrintablesJoho

Oil filter wrench

Oil filter wrench for many Peugeot, Citroën and some others. Has a ½" square drive for your ratchet. Tested to withstand a torque of 70 Nm and having only minor deformation in the ½" square as a result. Since the clearance on the ½" drive…

Downloads
709
Likes
103
Rating
5
P
PrintablesAneliya Ivanova

Ender 3 S1 pro allen wrench holder

holds the 5 hex wrenches that come with the ender 3 s1 pro Print Settings Rafts: No Supports: No Infill: 10%

Downloads
708
Likes
100
Rating
4.8
P
Printablesmaxelman

Wall Holder for Milwaukee 15pc Wrench Sets

Includes SAE and Metric files. Also a painted 3MF for Bambu Studio

Downloads
694
Likes
138
Rating
5