Search results: x12

Sort order

664 models

P
PrintablesJBJul

Duplo plate compatible 12x12

Il s'agit d'une plaque Duplo compatible 12x12. J'ai essayé de trouver une plaque 12x12 dans des boutiques en ligne,...je n'ai pas trouvé ce que je voulais, donc j'ai préféré le faire moi-même. Mes enfants adorent construire sur cette…

Downloads
638
Likes
56
Rating
4.75
P
Printables3DMN

Hyte Y60 Fan Bracket (3x120)

Hyte Y60 Fan Bracket (3x120), I made the second version of the https://makerworld.com/en/models/138628#profileId-151004

Downloads
637
Likes
12
Rating
0
P
PrintablesGarage Maker

Fan Grid 120x120

A beautifull fan grid 120x120 with hexgonal pattern

Downloads
540
Likes
28
Rating
0
P

Five star rim with hub cover 1:10 Tamiya ex12 mm offset 4mm+ rc car

I designed five star rim for a Tamiya rc car compatible 1:10 model, 52mm diameter, 26mm width, 4mm hole and 4mm positive offset. There is also the hubcap and the tool to screw it to the rim. Print with a layer of 0.15 otherwise the tool…

Downloads
147
Likes
45
Rating
5
P
Printablesgskollnau

Bonsai pot 10 hexagonal rounded (mame)_120x120x46mm

No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.

Downloads
115
Likes
21
Rating
5
P
PrintablesmC_rOMeo

Case for Raspberry Pi5 + X1201 UPS Board + X1001 PCIe NVMe board

I needed a case for my pi5 with the original active cooler and the two Geekworm boards x1201 and x1001. I use the pi5 for my home automation. When I bought the pi5 and the boards there was no matching case and so I designed this one. I…

Downloads
100
Likes
3
Rating
0

PCB_Tray_143x127.4x6

I made this tray because I did not have space where to store my PCB's before and after assembly. You can store PCB in panel or single PCB and you can stack them if you need. Is easy to print, without supports. Print instructions Printer…

Downloads
75
Likes
42
Rating
5
P
Printablesgskollnau

Bonsai pot 14 hexagonal curved inwards (mame) 120x120x70mm

No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.

Downloads
65
Likes
11
Rating
5
P
Printablesgsatelite

CPU Fan Grid - 12x12cm

CPU fan 12cm - grid. I'd recomend to sllice the bottom to make it flat :) No supports are required.

Downloads
64
Likes
9
Rating
0
P

Soldering and Workshop Fume and Dust Extractor for 120x120mm Fan

This is my take on fume and dust extraction for my small workshop. It is parametric and can be adjusted with a bit of FreeCAD knowledge. Printing advice: use 0.6mm nozzle and 0.40mm layer height print in PETG for some flex and conformity,…

Downloads
56
Likes
9
Rating
0
P
PrintablesThynix

M4x12 Fastener-Secured Fidget Clicker Wheel Case

I had trouble with friction fit standing up to enthusiastic fidgeting and repeated reassembly. This leaves the friction fit corners unchanged and puts an M4 hole in the middle. Suitable for an M4x12 machine screw.

Downloads
26
Likes
7
Rating
0
P
PrintablesRC builder

Riser stand for darkOne tray with FrSky X12S TX

The tray riser prevents TX connector/cable damage during programming of FrSky 12XS with darkOne TX tray. As the tray original rear bottom supports are only glued to the base, there can be dimensional inaccuracy. The raiser left and right…

Downloads
17
Likes
1
Rating
0
P
PrintablesdotwinX

Ikea LED-Spot TÅGVIRKE Halter / Holder 12x12cm for flat surface

My daughter wanted to keep her TÅGVIRKE, but with a holder placed on a flat surface. This is the solution. Please consider printing the holder sideways to improve durability of the clips, see bgcode or picture

Downloads
7
Likes
1
Rating
0
P
PrintablesVelvia

Open 6x12, 6x17 and 6x24 Panoramic Camera

Fully open source STEP files Please remix and share alike I'm sorry that all the files are not better sorted, labelled and optimized. 6x12 is designed for Fujinon SWD 65mm lens 6x17 is designed for Fujinon SWD 75mm lens 6x24 is designed…

Downloads
3,965
Likes
528
Rating
5
P
Printableskaje

Lathe Change Gears 7x10, 7x12, minilathe

Update Oct. 14, 2022 : Missing files for 60 tooth gear added. These lathe change gears should fit most 7x10, 7x12, or 7x14 mini-lathes. These prints include all of the standard gears, plus some additional gears to make additional thread…

Downloads
1,881
Likes
128
Rating
5
P
PrintablesHeiLaut

Tactile Switch Push Button Cap 12x12

I removed the gap in the switch cap, so it's easy to print upside down.

Downloads
1,676
Likes
68
Rating
5
P
PrintablesFlasheek

Fat Shot X - Multiformat (6x17, 6x14, 6x12, 6x9 and 6x6) 120 type film camera

Important updates 2025-02-21: Made a parametrically generated focusing scale , generated as an SVG file using JavaScript, using FFD and helicoid size as parameters. 2025-02-16: Made an illustrated user guide that covers all the quirks of…

Downloads
1,360
Likes
228
Rating
5
P
Printablesunhild

Meshtastic Seeed Studio XIAO ESP32S3 & Wio SX1262 case

This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…

Downloads
1,072
Likes
146
Rating
5
P
Printablesverdi

Meshtastic Seeed Studio XIAO nRF52 / SX1262 Case

Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html Print Settings: PETG 0.2mm layer 4 walls 15% infill add support on everything…

Downloads
996
Likes
167
Rating
4.5
P
PrintablesSchmoaler

Bearing MR128 8x12x3,5, functional

Search the web, and could not find a functional bearing with this dimensions. So I create one in a simple way and for fast print. The bearing has no rolls inside. The inner ring has a tap, so it could not fall out. I printed the bearing…

Downloads
877
Likes
25
Rating
5
P
PrintablesMasibu

Gridfinity LITE - Bosch Spade Bit x4, x8, x12

Please be aware the model uses light weight modeling so has at points thin walls of 0.8mm, some users have indicated they had structural issues if they don't have a well calibrated printer. Inspired by AaronOaks model, unfortunately my…

Downloads
814
Likes
156
Rating
4.88
P
PrintablesCybuster

Radiomaster TX12 Guards

0.2MM, no support required

Downloads
805
Likes
58
Rating
4.75
P
PrintablesSeeed Studio

3D Casing for XIAO ESP32S3 & Wio-SX1262 Meshtastic & LoRa Kit

This device is based on XIAO ESP32S3 and Wio-SX1262 LoRa module, making it the smallest Meshtastic Device, LoRa Sensor Node or a One Channel LoRaWAN Gateway. Coupled with an exquisite 3D - printed casing, it is equipped with an 868 -…

Downloads
735
Likes
74
Rating
4.5
P
PrintablesD!nu

DIN Rail Endcaps for M6x12 Cap Screws

Since Jevermeister's holder refused to fit my DIN rail (standard 35x7mm) I decided to remix his models. I decided to go for the following changes: widened the profiled hole for the rail itself shortened them so they will not interfere…

Downloads
622
Likes
53
Rating
5
P
PrintablesStanley

Tube Case for Seeed Studio XIAO nRF52840 & Wio-SX1262 (Meshtastic / MeshCore)

A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit . This case is suitable for portable Meshtastic or MeshCore LoRa nodes , powered by a single 18650 Li-ion battery. The cylindrical design protects…

Downloads
619
Likes
96
Rating
5
P
Printablesjaredpearson

Nintendo 3DS Card Holder (x12)

Needed a box to hold 12 Nintendo 3DS cartridges.

Downloads
542
Likes
90
Rating
4.75
P
PrintablesCybuster

Radiomaster TX12 Guards v2

Gimbals and Screen protector for Radiomaster TX12. Added - bridge between the Gimbals Guard - 2 x Antenna mount Recommend TPU-95A. PLA/PETG also works. No support needed

Downloads
540
Likes
42
Rating
5
P
PrintablesZapster

Frässchablone / Router Template / Corner Radius Jig (DeWalt 6x12mm Clamps Remix)

Remix of the great corner jig for routers by Woodenti to be usable with DeWalt guide rail clamps with a 6x12mm profile (see photos). The new holes are all-through, so that the clamps can be fully inserted. All files except for the…

Downloads
525
Likes
171
Rating
5
P
PrintablesSutschi

Monopoly Organizer | Tray | Inlay | Box | 255x125x37

Are you tired of searching for a Monopoly tray insert that actually fits the standard Monopoly set with its original cardboard inlay? After trying many designs, I couldn’t find one that worked with the dimensions of my Monopoly set.…

Downloads
521
Likes
95
Rating
5
P
Printablesbggd.tiguan

Spurplatten / Wheelspacer 5x120 72,6mm

Das ist eine Spurplatte die für BMW Modelle mit einem 5x120 Lochkreis und 72,6mm Mittelloch Zentrierung. Zentrierung ist mit Spiel auf 73mm geplant. Alle Spurplatten haben ein 3mm Konus, wegen dem Konus an der Radnabe. Zusätzlich: 1+2+3…

Downloads
472
Likes
12
Rating
0
P
Printableskonfetti

Wall mount for Teltonika RUTX09, RUTX11, RUTX12 and similar

The wall mount is designed to keep the router securely in place, in my case in a camper van. Compared to the model I remixed this from, this mount uses much less material therefore prints much faster and is designed as a snap-on: a tab…

Downloads
454
Likes
23
Rating
5
P
Printablesshaunhey

Seeed Studio nRF52840 and Wio-SX1262 Kit Keyfob Case

This is a very tight fitting case with very little tolerance. Minor trimming with a xacto knife might be necessary, especially around the “rim” on the back when snapping it into the front. The 100mAh battery does not take all the space,…

Downloads
434
Likes
57
Rating
5
P
PrintablesBrandoN3D

Radiomaster TX12 Battery Lid

My battery lid snapped at the hinge nubs. So I modeled this! It sits slightly below surface of controller for easy printing on a flat surface. To install, put one nub into the controller and bend the lid inwards so that the other nub can…

Downloads
416
Likes
10
Rating
0
P
PrintablesUpcrid 3D

Sanding Tools 60x120

Hi friends, I created this other version, with bigger dimensions, 60mm wide x 120mm long. I hope it comes in handy, if you like, share your prints, and your parameters, good printing maker.

Downloads
399
Likes
53
Rating
0
P
PrintablesHonzaTrykar

Parkside X12V tools holders

Tool holders for Parkside X12V series. I did not find any proper wall mounts fot tools so made them for those tools that I currently have. I included a shape that fits inside X12V tools in place where original battery is( in Fusion 360…

Downloads
377
Likes
57
Rating
0
P
PrintablesRob W1RCP

XIAO ESP32S3 Wio-SX1262 Meshtastic Enclosure with 18650 Battery for Desktop

What You'll Need: 18650 Battery Holder - https://amzn.to/4lnV6ej Double-sided Foam Tape - https://amzn.to/4kRXAzW Lora Antenna and IPEX-1 to SMA - https://amzn.to/3FJuHXS Or get this and use your favorite SMA antenna: IPEX-1 to SMA Female…

Downloads
372
Likes
40
Rating
4.33
P
Printablesdreimal_8

Xiao nRF52840 & Wio-SX1262 antenna clamp

A component that can be placed between the two circuit boards to secure the antenna connector. I've had the connector come loose before - but with this antenna clamp, the connector is now secure and can no longer come loose accidentally.…

Downloads
354
Likes
54
Rating
5
P
PrintablesLadPack91

Meshtastic Seeed XIAO nRF52840 & Wio-SX1262 Kit + 18650

Uses these terminals from Amazon for the 18650 sled. For the spring terminal, i trimmed the tab slightly, and it slides in at a 90 degree angle to route the wire up the side of the sled, and through the hole in the top. (pictures…

Downloads
348
Likes
82
Rating
0
P
PrintablesTycho Design

M12 Screw Collection M12x12-M12x100 ISO 4017 / DIN 933

Collection of screws (ISO 4017 / DIN 933) including : M12x 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 90, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…

Downloads
346
Likes
36
Rating
5
P
PrintablesBasementLAB

Wall Grid Cover "Honeycomb Design" 120x120mm / 150x256mm / 150x236mm / Ø120mm

Wall Grid Cover "Honeycomb Design" - 120x120mm / 150x256mm / 150x236mm / Ø120mm - Griglia di copertura Nido d' Ape Resize/Scale to adjust dimension 03/01/2025 added Honeycomb Grid Cover Ø120MM 17/01/2025 added Honeycomb Grid Cover…

Downloads
344
Likes
50
Rating
5
P
Printablesgerrrciu

Mounting bracket for Parkside X12V charger PLGK 12 A3

Created a little and simple screwable mounting bracket for Parkside X12V charger. Print with 3-4 perimeters, 0.2mm layer. Designed for PLGK 12 A3 but maybe it will fit other chargers It is best to print it standing up as it is in the file

Downloads
342
Likes
57
Rating
5
P
PrintablesCorodius

Printable Cable Chain 16x12

Printable Cable Drag Chain, with 16x12 internal dimension. 45 Degree rotational limit per link for radius limiting. Suits standard 2 and 3 screw cable chain mounts, with inverted variants to mount either direction. This chain is designed…

Downloads
337
Likes
32
Rating
5
P
PrintablesPeyton Creery

Open 6x12, 6x17 and 6x24 Panoramic Camera Remix

Build: https://ph.creery.org/posts/2024-04-15_3DPrinted612PanoCamera/3DPrinted612PanoCamera.html You will still need the hardware from the original source: https://www.printables.com/model/99364-open-6x12-6x17-and-6x24-panoramic-camera…

Downloads
335
Likes
52
Rating
5
P
PrintablesBenbenshow

Gridfinity 2x3x12 Bin

Gridfinity Bin matching the 2x3x12 designation (2 blocks tall)

Downloads
330
Likes
40
Rating
5
P
Printablesmachinekoder

HEPA Filter H12/H13 (FC8038/01, 150x120x25mm) + Activated Carbon Filter Housing for 120mm Fan

I re-upload the model from Thingiverse as I've used it for my server rack based enclosure for the MK4, and it does its job very well. Full credits to the original author. Summary Deutsch siehe unten :) This is a housing for using…

Downloads
327
Likes
58
Rating
5
P
Printablesn.leinad

SDS Impact Drill Holder x12

Bought a kit with 12 SDS drills for my impact driver and I wanted to store them neatly in the same case as the driver. Therefore, I made a simple and compact holder that is easy to print, even without using supports. The holder uses a 7…

Downloads
323
Likes
37
Rating
5
P
PrintablesBenbenshow

Gridfinity 3x3x12 Bin

Gridfinity Bin matching the 3x3x12 designation (2 blocks tall)

Downloads
322
Likes
22
Rating
5
P
Printablessmoura

LEGO - Compatible Plate 2x12

Plate 2 x 12 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or affiliated…

Downloads
317
Likes
11
Rating
0
P
Printablesgup3d

Lego Technic Lever 3x120

For years I have been a fan of Lego sets, of Star Wars more specifically, and one of the sets is the Tie Defender fighter and over the years the Technic Lever piece broke and Lego has the piece discontinued, so I decided do it myself.…

Downloads
311
Likes
44
Rating
5
P
PrintablesRazzy

Hyte Y60 3x120mm Fan Adapter/Shroud

An adapter to fit three 120mm fans on the “front” side of your Hyte Y60 case! 20 fan screws and 3x120mm fans are needed for this modification. 4x screws per fan to hold them onto the adapter/shroud. 8x screws to mount the adapter/shrouds…

Downloads
306
Likes
17
Rating
5
P
PrintablesJustFun2772

NAS R1 R7 Topton Aoostar Kingnovy riser for 92x92x25mm and-or 120x120x25mm fans

Another version of the riser. Now it is possible to replace the standard 92x92x15 mm fan with the more common 92x92x25 mm fan. Additionally, there is the option to install a 120x120x25 mm fan. I installed both fans, replacing the standard…

Downloads
302
Likes
18
Rating
0
P
PrintablesDJ

Festool MFT DIY Corner Stops (20mm) 121x121mm, 217x121mm und 130x130mm (einstellbar)

Festool MFT DIY Corner Stops (20mm) Verschiedene Varianten: Corner Stop 121mm x 121mm Corner Stop 217mm x 121mm Corner Stop 130mm x 130mm (einstellbar) mit verschiebbaren “Dogs” Straight Stop 121mm Straight Stop 217mm

Downloads
291
Likes
79
Rating
5
P
PrintablesGreatOldOne

Nema 17 / GX12 Socket End Caps

4 endcaps for Nema 17 sized stepper motors, allowing the use of GX12 (12mm diameter) locking circular multi pin connectors. More robust than the usual 6 pin JST connector or straight wires coming from the coils, both of which are prone to…

Downloads
282
Likes
46
Rating
5
P
PrintablesSeeed Studio

3D Model for Wio-SX1262 LoRa Module for Seeed Studio XIAO

This is a high-performance LoRa module specifically designed for the XIAO series development boards. Based on the Semtech SX1262 chip, it supports global LoRa bands (862-930MHz). Combined with the powerful computing capabilities of the…

Downloads
278
Likes
16
Rating
5
P
PrintablesDREnd59

Support Batterie Parkside X12V Team

Support Batterie Parkside X12V Team Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0,28 Infill: 40 Filament: Geeetech PLA Green Notes: Support Batterie Parkside X12V Team Category: Tool Holders…

Downloads
273
Likes
44
Rating
5
P
PrintablesFinn

Meshtastic Xiao ESP32S3 Wio-SX1262 Case

Recently I found the Xiao ESP32S3 with Wio-SX1262 LoRa hat as a good and cheap Meshtastic node for installtion at home. For some time it was just sitting in a breadboard which, the USB cable dangling between some flowsers… you know, it…

Downloads
266
Likes
62
Rating
5
P
PrintablesvmLOGIC

LEGO DUPLO Base Plate 12x12

Need a base plate but don’t want to go full size? This smaller LEGO DUPLO-compatible version might be just what you’re looking for. Printing information The STL file is correctly aligned. Layer height: 0.2 mm Perimeter: 2 Infill: 100 %…

Downloads
266
Likes
15
Rating
3
P
PrintablesBrent

Bearing - 8x12x3 - OpenRC F1 Front Wheel

I have some OpenRC F1 cars that are only being displayed and won't be driven (anymore). I didn't want to waste actual bearings by having them sit on the car, but the bearings are required for the wheels and axels to fit together…

Downloads
260
Likes
23
Rating
5
P
PrintablesGUZ_prints

SORTAINER SYS 4 TL-SORT/3 - BOXES - 60x60x71, 60x120x71, 120x120,71

Nests in drawer indentations and has a chamfered base to easily grab small parts from the bottom. I

Downloads
257
Likes
58
Rating
5
P
PrintablesAinon3Dtisk

Box, crate 160x120x70

Hello, Today I have a Box for you, a 160x120x70 container . Ideal for harvesting fruits and vegetables. Also suitable for storing food and other things. The boxes fit together nicely, they can be stacked on top of each other. I used…

Downloads
250
Likes
66
Rating
0
P
Printablessidoh

120x120mm Fan Mount for Prusa IKEA Lack Enclosure

What is it? Mount for a standard 120x120mm computer case cooling fan. Slides into the top of a ~129x129mm cutout at the top middle of the rear acrylic sheet for the Prusa IKEA Lack Enclosure. Why would you want a fan? Particularly with…

Downloads
249
Likes
82
Rating
4.75
P
PrintablesMFTuning

PCI FAN FOR GPU 120x120

Крепление для установки вентилятора для охлаждения видеокарты Category: Electronics

Downloads
248
Likes
37
Rating
4.67
P
PrintablesReine

DIN Rail Endcaps for M6x12 Cap Screws

This file is prepared for a Formlabs printer and have been tested on a Form3B+ with Grey v4 resin printed exactly as oriented in the .form-file. The .zip-file contains a .form-file you can open in PreForm.

Downloads
248
Likes
33
Rating
4.5
P
PrintablesMonsieur Luke

GX12 connector screw-cap

You can trim the end if you want a shorter version, or swap filament before the end of the filet with TPU to make it more water-tight.

Downloads
243
Likes
10
Rating
0
P
PrintablesTycho Design

M10 Socket Head Screw Collection M10x12-M10x60 ISO 4762 / DIN 912

Collection of screws (ISO 4762 / DIN 912) including : M10x 12, 16, 20, 25, 30, 35, 40, 45, 50, 55, 60 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…

Downloads
241
Likes
22
Rating
0
P
Printablesperfectscale

Gridfinity Magnet Base Improved - all sizes up to 13x12, 6mm and 5mm magnets

Baseplates for Gridfinity, with that satisfying magnetic snap. Based on the proven Gridfinity Extended “Efficient Magnetic Base”, with a number of improvements: Friction fit for magnets, no glue needed Extraction holes for magnets, use…

Downloads
238
Likes
29
Rating
4
P
PrintablesNico

Nanode - Meshtastic Seed XIAO ESP32S3 & Wio-SX1262

Description While I wasn't looking to make the most unreasonably small Meshtastic node when I originally bought my XIAO ESP32S3 & Wio-SX1262 from Seeed Studio ; however, it has become quite a Quixotic quest to come up with one…

Downloads
237
Likes
45
Rating
2
P
PrintablesJD

IKEA furniture MOPPE 21x17x12 cm

I would appreciate a lot if you could support me giving a like and downloading, thank you guys.

Downloads
234
Likes
48
Rating
0
P
Printablesseed49

Gridfinity 4 drawer unit 2x2x12

Gridfinity 2x2x12 unit with 4 drawers The drawer fronts have a space for a 12 mm label. Optimized print profiles for Bambu Lab printers available here : MakerWorld

Downloads
234
Likes
73
Rating
0
P
Printablesmacmanluke

Skadis Top Shelf 250x120mm

Shelf to suit top of Skadis board 250x120mm 3 Pieces to cover whole top of 750mm wide skadis

Downloads
232
Likes
35
Rating
5
P
PrintablesFlurbb

Bosch 5 inch Random Orbit Sander Wall Mount GEX12v-125

I can't mark it as a remix of a model from Thingiverse but this is a remix. Designed to fit #8 wood screws. Based on https://www.thingiverse.com/thing:5372438 by hobbid, the model fits the sander perfectly but I was a little unhappy with…

Downloads
228
Likes
31
Rating
5
P
PrintablesStanley

GT2 Pulley / Idler 16x12 Bearing 623ZZ

GT2 Pulley with 2 x 623ZZ bearings. Print instructions Unassociated tags: Rebel II Category: DIY Summary GT2 Pulley with 2 x 623ZZ bearings. Print Settings Rafts: No Supports: No Resolution: 0.1mm Infill: 80% Notes: nozzle: 0.4mm layer…

Downloads
228
Likes
22
Rating
5
P
PrintablesDurahl

FrSky Horus X12S - Radiomaster TX16 IPS Touchscreen Backing Plate

EdgeTX , a modified Firmware and a Radiomaster TX16 touch enabled screen make it possible for the FrSky Horus X12S radio transmitter to also have touch functionality. The increased thickness of the touch enabled screen though makes it…

Downloads
226
Likes
6
Rating
5

Yet Another Smart Vent 6x12

For printing tips/advice: https://github.com/TonyBrobston/yet-another-smart-vent/blob/master/docs/VENT_PRINTING.md Check out the GitHub project for more information. https://github.com/TonyBrobston/yet-another-smart-vent

Downloads
219
Likes
9
Rating
0
P
Printablessmoura

LEGO - Compatible Plate 1x12

Plate 1 x 12 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or affiliated…

Downloads
212
Likes
12
Rating
1

4x5 9x12 sheet film developing holder

I stole the design from the eTone 4x5 holder photos and made this thing from 1.6 nylon trimmer line. Added flexible joints instead of screw. I prefer this simple 2 sheets holder because of x-ray film stiffness and emulsion fragility. Fits…

Downloads
211
Likes
40
Rating
5
P
PrintablesRob W1RCP

XIAO nRF52840 Wio-SX1262 Meshtastic Enclosure with 18650 Battery for Desktop

What You'll Need: 18650 Battery Holder - https://amzn.to/4lnV6ej Double-sided Foam Tape - https://amzn.to/4kRXAzW Lora Antenna and IPEX-1 to SMA - https://amzn.to/3FJuHXS Or get this and use your favorite SMA antenna: IPEX-1 to SMA Female…

Downloads
209
Likes
22
Rating
0

Yet Another Smart Vent 4x12

For printing tips/advice: https://github.com/TonyBrobston/yet-another-smart-vent/blob/master/docs/VENT_PRINTING.md Check out the GitHub project for more information. https://github.com/TonyBrobston/yet-another-smart-vent

Downloads
206
Likes
16
Rating
0
P
PrintablesStep1makeart

120x120x54 Rugged Box

Remix of Rugged Box to 120x120x54 in Fusion 360 Uses 30mm M3.5 bolts Thicker hinges and supports

Downloads
205
Likes
33
Rating
0
P
Printableskaje

Lathe Change Gear 7x10 or 7x12 Minilathe - 63 tooth for metric threads

This lathe change gears should fit most 9x10, 9x12, or 9x14 mini-lathes. This change gear makes it possible to cut metric threads on a lathe with an “imperial” (typically 16tpi) lead-screw. For details on using this gear, see this link:…

Downloads
204
Likes
14
Rating
5
P
PrintablesPiotr W
Downloads
204
Likes
27
Rating
4.5
P
PrintablesChimeraX

Seeed Studio Xiao NRF52850 & WIO SX1262 LoRa kit modular case system

This case has modular battery inserts to allow the use of 18350, 18650, and 21700 batteries. The USB port of the Xiao is accessible, and there are two frames. One with just a power switch to wire inline with the battery, and another which…

Downloads
187
Likes
18
Rating
0
P
Printablesgerrrciu

Parkside X12V 5Ah 2,5Ah 2Ah - 4x battery holder

Parkside X12V 5Ah 2,5Ah 2Ah - 4x battery holder

Downloads
186
Likes
20
Rating
5
P
PrintablesEolian

M2x12 flat screw v3

Customized version of https://www.thingiverse.com/thing:193647 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: type = bolt head_type = countersunk…

Downloads
186
Likes
4
Rating
0
P
PrintablesMorten.Kolve

Parametric 6x12 V2 lenscones

parametric Fusion 360 file for lenscones with M65 focus helicoid parametric Fusion 360 files for lenscones with fixed focus helicoid (you decide on infinity, hyperfocal distance or your preference. Preset / check focus with a…

Downloads
186
Likes
18
Rating
0
P
PrintablesTycho Design

M12 Socket Head Screw Collection M12x12-M12x80 ISO 4762 / DIN 912

Collection of screws (ISO 4762 / DIN 912) including : M12x 12, 16, 20, 25, 30, ,35, 40, 45, 50, 55, 60, 70, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…

Downloads
185
Likes
32
Rating
0
P
PrintablesOtann

Voron 2.4 Multi-Tool Exhaust Cover with ECAS and PUG/GX12/Microfit

This mod allows you to replace the original carbon filter, but let's you have up to 5 umbilical cables through the back of your printer. The design allows you to have a clean wiring inside the chamber and let's you manage all the CAN…

Downloads
184
Likes
45
Rating
4
P
PrintablesPreKona

Lüfterkanal von 120mm durchmesser auf 30mmx120mm

Ich brauchte einen Luftkanal um die Lüfter nicht direkt auf meinem Schreibtisch stehen zu haben. So verschwinden die Lüfter hinter meinen Monitoren und ich bekomme trotzdem einen Windzug ab. V2 ist ein wenig anders Designt und mit…

Downloads
183
Likes
21
Rating
0
P
PrintablesKFORMS

HEPA Filter holder for Prusa Enclosure and rack server cabinets (120x120 fan)

Filter holder for Prusa Enclosure and rack server cabinets (120x120 fan). It is cheap, fast to make and simple as possible. Holder is designed for Zortrax filter set (Hepa + Carbon), but any square filters up to 27mm thick will fit. You…

Downloads
183
Likes
83
Rating
4.33
P
PrintablesJuraj_K

12x12mm push button mount

I needed a simple way to mount 12mm pushbutton for a recent project ( foot switch ), so I made this. There are 2 versions (with 2 screw holes and 4 screw holes), each for m1.6 , m2 and m3 screws. I printed mine out of PLA and didn’t have…

Downloads
182
Likes
15
Rating
5
P
PrintablesJérémy Reeder

Modular Chessboard - 6x6, 8x12, whatevs

This set of “executive-size” (45mm) checkerboard squares is a simplified, frameless variant of Martin_au's larger modular modular tournament-size board . Interlock any number of squares to create a custom checkerboard grid. Common…

Downloads
179
Likes
23
Rating
5

9x12cm Standard sheet film holder V2

Overview This is the 9x12cm version of 4x5" Standard film holder. It uses 0.5mm dark slide made from black plastic A4 folder. This will be my main film holders because of metric x-ray film dimensions. No supports Velvet sealed dark slide…

Downloads
179
Likes
24
Rating
0
P
Printables3D Maker Garage

Rugged Box 120x120x70

Hey, here you have another of my designs, this time it's my rugged box which you may use to store and protect whatever you want. May be one of the best things of this model is that this one is fully 3D printable. So, you are not gonna…

Downloads
174
Likes
31
Rating
0
P
Printablesperfectscale

Thin Gridfinity Magnet Base - up to 12x12

Baseplates for Gridfinity, with that satisfying magnetic snap, significantly thinner and cheaper than traditional magnet bases. Based on the proven Gridfinity Extended “Efficient Magnetic Base”, with a number of improvements: Uses 5x1mm…

Downloads
170
Likes
64
Rating
4.5
P
PrintablesChimeraX

Seeed Xiao NRF52840 WIO SX1262 kit case for 18650 battery

I wanted a case that used standard 18650 batteries for my Xiao NRF kits that also had a power switch. You'll need some switches like these (2MM): https://www.aliexpress.com/item/1005005531658132.html Battery terminals like these:…

Downloads
167
Likes
34
Rating
0
P
PrintablesSDM

XIAO nRF52840 & Wio-SX1262 - Universal Case

A base mount to design a case around for the XIAO nRF52840 & Wio-SX1262 kit. No screws or glue needed, the kit just clips in place. Enjoy!

Downloads
165
Likes
14
Rating
5
P
PrintablesBekker

Laptop stand with 2x120mm fan mount

Just a simple laptop stand i made for my old dell XPS 15, that had cooling issues when doing heavy work. This stand has mounts for 2 x 120mm fans. You need to print the following: 1x Top Right 1x Top Left 2x Side 1x Pin Large 2x Pin…

Downloads
164
Likes
22
Rating
0
P
Printablesgerrrciu

Parkside X12V battery holder

Parkside X12V battery holder. Two ways of mounting

Downloads
160
Likes
27
Rating
5
P
PrintablesVincent Cordier

Square Vase 12x12cm with tank

Here is a design i love to use for growing Basil. Thanks to the tank of water at the bottom the ground stays wet. I sometimes use Urtica as a fertilizer (1kg in 10l water for 14 days then diluted 10%). Seems to grow really well. I have…

Downloads
159
Likes
14
Rating
4