Search results: x18

Sort order

Counting matching models…

P
PrintablesDevrosx

Self inking stamp (47x18 mm)

Self inking stamp (47x18) (same ink pad as trodat 4912). here is video www.instagram.com/p/CMf8UjKhHci/ what you need: ink pad (47x18 - for 4912 stamps) laser engraved rubber (or you can try printer stamp design with TPU) some spring for…

Downloads
1,211
Likes
143
Rating
3.5
P
Printablesjoaopdmdias

Shelf Bracket for 200x18 mm Wood plank

I've designed a shelf to raise my coffe equipment. I've used a pine plank, 200mm width, 18mm height and fits perfectly. It is very stable and can be done in any length size. The example I have is a 38cm plank, I think it should hold fine…

Downloads
1,169
Likes
706
Rating
4.67
P
PrintablesDaki3D

Regal-Winkel 180x180x30

Es ist ein Winkel für eine Regalfläche.

Downloads
831
Likes
48
Rating
5
P
Printablesvalerio9527

First layer test 150X150 - 150X180 - 50x50

First layer 150x150 0.2H First layer 150x180 0.2H First layer 50x50 0.2H

Downloads
693
Likes
21
Rating
5
P
Printableswoelpi

LEGO technic gear inspired clock x187

Hello everyone, there are several nice models for lego technic inspired clocks based on the old 24 teeth x187 gear. I found these: https://cults3d.com/de/modell-3d/haus/horloge-clock-lego-technic-gear-engrenage…

Downloads
502
Likes
175
Rating
5
P
PrintablescoffeeFueledDiy

Roll-Up Rose for Small Print Bed (Prusa Mini+ / 180x180mm)

Sharing these files to make it easier for anyone with a small print bed who wants to make one of these roll-up roses. Overall, the model is scaled down 80% with a minor modification to the thickness of the rose petal part. Follow the same…

Downloads
447
Likes
83
Rating
5
P
PrintablesNie9001

FCX18-1/18 Scale RC Toolbox

I made this toolbox specifically to fit the FCX18 FMS LC90 roof rack. Toolbox should be good for all 18 scale RC.

Downloads
446
Likes
71
Rating
5
P
PrintablesKamil K

Paleo gameboard - version for two 18x18 dice

Hello everyone, Token holder remix for Paleo found on Thingiverse (by Lubi90 April 12, 2021) I have changed the place for the dice so that the dice 18x18x18 can now be stored (e.g. Polish version of Paleo Boardgame have dice in that…

Downloads
445
Likes
51
Rating
5
P
PrintablesJohn Doe

FCX18 Wheel Wells and Shock keys

Wheel wells for FCX 18 - you'll need to perform a cut in the slicer and orient the flat parts to the build plate. Shock Keys, Rear keys are in 2 parts to make it easier to print. Front Shock keys I got lazy, just print the side with the…

Downloads
443
Likes
17
Rating
0
P
PrintablesHijinx

Dell Monitor Vesa Adaptor (S2x18, S2x19 monitors)

This print will allow you to use your Dell SE2419HR monitor with a VESA mount based monitor stand. This will be compatible with any Dell montor that uses the same metal pivot on the stand. To use: Detach base from existing monitor stand -…

Downloads
392
Likes
24
Rating
5

Dummy 13 - Hand Mega Pack on Runners for 180x180 bed

I love @RadekPilat's Dummy 13 Hand megapack, but was frustrated that it would tie up my larger printer, because I couldn't fit the 150% version on my 180x180 Bambu A1 Mini, so with a bit of re-arranging, now the entire megapack fits…

Downloads
388
Likes
35
Rating
0
P
Printablesjt001sk

FMS FCX18 LC80 inner fenders

FMS FCX18 Toyota Land Cruiser 80 inner fenders with side steps. Print with tree supports due to the side step/rock slide part of the inner fender. Two screws are already present on the chassis to mount the inner fenders. The inner fenders…

Downloads
360
Likes
23
Rating
0
P
PrintablesFladdie

Bracket GL iNet AX18000 Wireless Router

Since the router itself has no way of attaching it, I quickly constructed a holder. The router can simply be clipped into it in any orientation. I designed the holder for a GL iNet AX18000 wireless router. I have not been able to verify…

Downloads
320
Likes
16
Rating
0
P
PrintablesTebonr

FCX18 Suspension Mod

Description: I designed these “Flex Blade” arms to get more travel out of the stock suspension when using the stock shocks. I have Treal 4 link arms installed, but it should work the same with the stock links. The mounting for the flex…

Downloads
309
Likes
35
Rating
0
P
PrintablesCaptainAl

Desk stand for Omada AX1800 (EAP615) Wall Plate WiFi 6 Access Point

Very easy stand design for Omada AX1800 (EAP615) Wall Plate WiFi 6 Access Point Other materials than 3D printed models? Two M3 bolts

Downloads
307
Likes
19
Rating
5
P
PrintablesBrent

Bearing - 12x18x4 - OpenRC F1 Rear Wheel

I have some OpenRC F1 cars that are only being displayed and won't be driven (anymore). I didn't want to waste actual bearings by having them sit on the car, but the bearings are required for the wheels and axels to fit together…

Downloads
293
Likes
26
Rating
0
P
PrintablesTomson Design

9x18 Makarov ammo box

I got a request for a 9x18mm Makarov ammo box. The spacing is 35pcs/10,25x26,07mm between the insert top and bottom. I am using 1,6mm stainless steel Tig-welding pin for the hinge and latch. I made the latch smaller than necessary but let…

Downloads
265
Likes
26
Rating
0
P
PrintablesDlarsen

238x184 Rugged Box Spiderman Bambulab Version

STL's and Bambulab 3MF files are both included! This is a remix of the Bambu Logo-Multimaterial AMS Rugged Box Remix. I scaled this up 150% and added a Spiderman face inside and outside the lid for my grandson. there is also a blank lid…

Downloads
257
Likes
58
Rating
0
P
PrintablesLegitHotPotato

Organizer 125x180mm (IKEA ENHET) bathroom cabinet

Made an organizer for our bathroom cabinet (Ikea Enhet 130cm depth) Easy to print, and should fit most bathroom cabinets of other brands too. Wall Thicknes is 2mm. Wall Height is 40mm. + additional 2mm Floor Thickness (Total 42mm Height)…

Downloads
250
Likes
53
Rating
5
P
PrintablesMT

Auto Stamp 47x18mm

This is a remix of Devrosx's self inking stamp. I fixed up the model, and added some design so we can use screw to secure the shell - stamp holder rotation. This makes the stamp rotation smoother and a lot more reliable. ====== Non…

Downloads
241
Likes
24
Rating
3.5
P
PrintablesKeyboardMouse

Monitor Stand Leg for 200x18mm shelf piece

About this design With the help of a shelf piece and a bit of 3d printing filament you can create a handy monitor or laptop stand. I used a 200x18x600mm sized piece of PAL. The decorative holes can be also used to route your cables. I…

Downloads
224
Likes
110
Rating
0
P
PrintablesCatch222

FCX18 K10 Frontbumper IB Style

Normaly the bumper can print with the standard nozzle 0.4. But for good faces , you have to place it on the build plate in a angle from 39.50° . The tube was cutted in two part and print with a 0.2 nozzle. For the frontlight pls print…

Downloads
210
Likes
13
Rating
0
P

FMS FCX18 LC80 Shock keys

The stepfile is only the left side. Just mirror the side for the other. printed without support.

Downloads
203
Likes
17
Rating
0
P
Printablesjoobie

VESA 75x75 to 18x18 M4 adapter for Multifunction Arm mounting system (SMALL)

VESA 75x75 adapter for the small arm system from RostaP's Multifunction Arm mounting system. The adapter can be screwed onto any 18x18 M4 holder piece using 4 M4x12 screws, then attached to a VESA 75x75 device (also using M4 screws). I…

Downloads
199
Likes
121
Rating
0
P
PrintablesThosa

#0073: 24x18 Bilderrahmen - 24x18 Pictrue Frame

EN: This is my 3D picture frame, The frame is completely printable. Suitable for canvases 18cm x 24cm x 1,5cm. You can easily adapt this frame to other canvas sizes with Sketchup, 3dBuilder or TinkerCad. You can see them in this video:…

Downloads
194
Likes
26
Rating
5
P
PrintablesKaan Yaren

Heltec Lora V3 Box - 2x18650 - Larger Type C Hole, Bigger Buttons - Rounder Edges

I really liked the model, though it was edgy and not so ergonomic. I made the buttons larger with a rectangular-like shape, made type c hole bigger for using larger based cables and made the edges smoother. Added f3z file if you wanna…

Downloads
192
Likes
35
Rating
5
P
PrintablesMerrist

Simply photo frame / stand 5x7 13x18 127x178 L/P

Simply photo frame / stand 5x7 13x18 127x178 Easy to print, can be used on landscape or prtrait orientation Printed with 0.6 nozzle, 0.4 layer and PLA

Downloads
187
Likes
15
Rating
5
P
PrintablesCatch222

FCX18 K10 Rearbumper IB style

Normaly the bumper can print with the standard nozzle 0.4. Support is recommended.

Downloads
184
Likes
16
Rating
0
P
Printablesderollmann

FritzBox 7490 / 7590 "No Drilling" Wallmount 180x180 build plate

A quick'n'dirty remix of a FritzBox Wallmount with flat backplate for double sided gluetape

Downloads
182
Likes
14
Rating
5
P
PrintablesJan Lhotak

Shoe rack - for standard 200x18 (mm) OBI boards

Remix of Shoe rack with full 3D honeycomb model. For use with standard OBI 200x18 (mm) boards.

Downloads
176
Likes
32
Rating
5
P
PrintablesDoom_Gloom

FMS FCX18 Shock tower/keys

Drew these up myself for ease of printing. STL is left and right. Same file is compatible with front and back. May require 180degree rotation in slicer to make it easier to print. Enjoy.

Downloads
168
Likes
13
Rating
0
P
PrintablesRP3D

Brembo 16X18 Brake Lever

Ready to print 3D model of the famous Brembo 16X18 brake If you print it, please give a feedback Thanks

Downloads
156
Likes
14
Rating
0
P
PrintablesJulsen

TP-Link AX1800 EAP613 Stand

Print with tree support. You also will need the metal mounting bracket deliverd with the EAP613

Downloads
150
Likes
21
Rating
5
P
Printablesgskollnau

Bonsai display table (06) square 180x180x33 mm

Bonsai display table (No. 06) square 180x180x33 mm, best for bonsais with round pots. Feel free to scale up or downn until you like the result and it suits your tree.

Downloads
142
Likes
31
Rating
5
P
Printables75echo

Voron 0.1 rearpanel 211x184

Print in PETG ,ASA or ABS so it can withstand heat

Downloads
141
Likes
36
Rating
5
P
Printablesherbert

R1/30 Outer Shoulder for 180x180 Printbed

This is a Remix of the 1/30 Outer Shoulder from BobC_3d optimized for printing diagonal on a 180x180mm printer like a Prusa Mini. https://www.thingiverse.com/thing:4340764 The original was a little to large for the printbed, so I decided…

Downloads
134
Likes
19
Rating
0
P
Printablesrodsgear

Film or Paper 13x18 film holder

I've build a 13x18 back standard for my Toyo View 4x5 and I was nor able to find a film holder so I had to make one myself. This is a a one sided and follow the same style of the comercial ones. Since It take a long time to print I only…

Downloads
134
Likes
23
Rating
0
P
PrintablesCatch222

FCX18 K10 Rollbar

So this is my first part for the FCX18 K10. In this case there will follow some more.

Downloads
133
Likes
12
Rating
0
P
PrintablesCXDESIGNS

Mini 22.5w Compact Powerbank 2x18650 LX-PB225M

Warnings: ⚠ Please read the powerbank module instructions ⚠ Never solder to batteries ⚠ Assemble and use at your own risk ⚠I reccommed getting brand new, reliable batteries from a well known brand, such as Panasonic, LG, Samsung. 2 x…

Downloads
132
Likes
15
Rating
0
P
PrintablesAlex_B

Heltec V4 Meshtastic LoRa GPS Rugged Case 2x18650 by Alex_B

My first original design. Print the front and back parts with supports at a 45-degree angle. Print the frame lying flat. Assembly requires: 6x M3 heat-set inserts 1x 2.9 mm light pipe 1x 1S 9A BMS board 10x M3x6 DIN 912 hex socket head…

Downloads
128
Likes
12
Rating
5
P
Printablesolivier

JeNo 3" Antenne (option GPS 18x18x8)

Pour impression en TPU. La version avec support GPS est prévue pour un GPS de dimensions: 18mm x 18mm x 8 mm

Downloads
128
Likes
4
Rating
0
P
PrintablesTellblom

USB TP4056 frame for 1x18650 battery holder

Simple holder for charging 18650 batteries in original battery holder and TP4056. Be careful when pressing down the battery holder so that the cables doesn't get squeezed. The chip I use have the positive pad on the left side, please…

Downloads
120
Likes
22
Rating
5
P
Printableslion7718

HueForge Frame 180x180

Res: 2 Infill: 20% Gyroid You cannot print this on the A1 Mini.

Downloads
117
Likes
35
Rating
5
P
Printablesvitaprint 3D

Prusa MK4S Box - 230x180 mm

This is a perfect Box for your Prusa Spare Parts. Size of the Box Inner-Dimension: 230mm x 180mm x 70/170mm (2 versions available) You need folowing Screws to complete it: M3 x 30 = 4 pcs (for the Hinges) M3 x 35 = 2 pcs (for the Handle)

Downloads
114
Likes
27
Rating
0
P
PrintablesOH8EFI

Meshtastic RAK19003 + 2x18650 enclosure

This is my self designed enclosure for a small portable node using RAK19003 . This version should take in all of the versions of RAK19003 but the LED locations are taken from version E (same as versions C and D). Following images…

Downloads
112
Likes
43
Rating
0
P
PrintablesMcFly

HGLRC - Rekon 7 pro - M10 Mini GPS Mount 18x18

Remixed the mount for a smaller GPS Category: 3D Printing

Downloads
110
Likes
3
Rating
0
P
PrintablesCatch222

FCX18 K10 Toolbox

Here is my version of a simple toolbox for the fcx18 K10. Printed with a 0.4mm nozzle,heights of 0.16 or 0.12. Filament could be a silver silk one. Top parts must be glued.

Downloads
107
Likes
14
Rating
0
P
PrintablesRandom Letter

FCX18 K10 Front Bumper

This model is a front bumper for the FCX18 K10 and can be installed using the original hardware. I printed it in PETG-CF, but any material should work. I used a 0.4 mm nozzle, 0.2 mm layer height, 3 perimeters, and 15% infill. There are…

Downloads
104
Likes
4
Rating
5
P
PrintablesTom Scofield

Yaesu FT-817 3x18650 battery holder - alternate fuse holder

This is a minor change to the great battery holder posted by tandro. I updated it to Accommodate a different fuse holder Deeper wire channels between the positive and negative battery terminals that get connected to allow for the…

Downloads
99
Likes
14
Rating
0
P
PrintablesSteL

Modern Picture Frame 13x18cm w/ Stand & Wall Mounting by SteL

A modern and simple 13x18cm photo frame with the option of a standing mount or a wall mount. Easy one screw assembly (any pan head no. 2 or no. 3 screw 8-10mm long). The frame on the pictures was printed with 0.28mm layer height and 10%…

Downloads
97
Likes
21
Rating
0
P

pupitre émetteur Frsky X18

Pupitre élégant pour radiocommande X18 Frsky. Il se range dans la valisette molle avec l'émetteur. Il protège les manches "gimbals" de la radiocommande durant le transport dans la valisette. Les différentes pièces peuvent être plaquées…

Downloads
95
Likes
6
Rating
0
P
PrintablesLaynor

25x18 | Cable Trunking, Cable Raceway | Goulotte | Joint Covers, Couplers | Caches, Raccords, Jonction

the size 25x18 is the outside of the cable trunking (consequently, the inner space of each joint covers) if there's a lot of downloads, i might consider building the 2 missings parts "90 OUT" & “END”

Downloads
94
Likes
7
Rating
0
P
PrintablesShoggomo

Photo Frame (13x18cm, glass space)

A light and thin 3D print Photo Frame that can be mounted on the wall or placed on the table. All parts can be printed without support, 30% infill is recommended for the body, and 60-80% infill for the stand parts(PhotoFrame-parts.stl).…

Downloads
94
Likes
9
Rating
0
P
Printablesclavo

Picture Frame - 13x18 cm

Simple picture frame for pictures in size 13x18cm. Notes: Since the back is already included supports are required for printing (only on build plate) On the back is a cutout to hang it Simply cut a suitable piece of cardboard and slide it…

Downloads
93
Likes
16
Rating
0
P
PrintablesJeff Pursley

240x180 Hueforge Picture Frame

This is a remix to go from 240mm x 150mm to 240mm x 180mm. I wanted to do a HueForge model for a friend, Car Girl by LastShot457 | Download free STL model | Printables.com , that required a different size, so I stretched this a bit to…

Downloads
93
Likes
14
Rating
0
P
PrintablesBogdanBogvzyan

Spiral for Paterson Developer Tank 13x18 (5x7")

Spiral for developing sheet film 13x18 cm (5x7 inches). Suitable for Paterson Multi-reel 3 tank. Holds 4 sheets of film. Developer consumption: Standing development – 980ml Rotation development – 500ml Consists of 3 parts that need to be…

Downloads
93
Likes
20
Rating
0

Ski & Snowboard Vise (Waxing/Tuning Stand) optimized for small printers (180x180mm)

This design is a remix/remake of the original model by 0161design , which I really liked but couldn’t fit into the build area of my printer. To solve this, I split the model into three parts and added tongue‑and‑groove joints for quick…

Downloads
92
Likes
14
Rating
0
P
PrintablesDevin Weng

SpeedyBee Mario5 Low Profile 18x18mm GPS mount

Orientation of the Walksnail M181 will be CW0FLIP in betaflight for correct compass orientation. Make sure to follow Betaflight's magnetometer calibration before flight to ensure GPS is set up properly. No extension: Won't have the extra…

Downloads
91
Likes
9
Rating
0
P
PrintablesGordyt47

Sanding Stick using 1/2" x18" Belts

Sanding Stick using 1/2" x18" Belts Spring is 1.3" long 0.35 diameter wire 0.0225 Source for belts…

Downloads
90
Likes
18
Rating
5
P
Printablescaveduck

End mill tray 1x18 layout for 3/8 shank x 3-1/4 long double-ended

Modification of TaylorsMake's end mill tray (from TV) to hold bare US standard 3/8" shank x 3.25" long double-end mills. The mods are: Higher density single-row layout holding 18 tools without the individual plastic cases Thicker…

Downloads
88
Likes
14
Rating
0
P
PrintablesSuperKushGod

FMS FCX18 Lc80 trailer hitch/tow ball

Simple trailer hitch that fits the standard rear bar on the FMS fcx18 Lc80. A 5mm ball joint fits snug over the ball.

Downloads
87
Likes
15
Rating
0
P
PrintablesRoboRay

FCX18 LC80 V2 Body Wheel Wells and Shock keys

Narrower wheel wells and lower rear shock keys for V2 body. You will have to reroute the wiring for the rear lights. The rock sliders are from here: https://www.thingiverse.com/thing:7247724 Edit: I updated the rear shock keys with the…

Downloads
86
Likes
7
Rating
0
P
PrintablesAvise

Spektrum DX18 Gimbal Protector

Yet another gimbal protector, this one for Spektrum DX18 transmitter. Simple, no frills, made to use as little plastic as possible. Print instructions Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 0%…

Downloads
86
Likes
6
Rating
5
P
PrintablesEmigrand

DIY Wifi Router UPS 2x18650 (24W DC UPS)

This is the diy wifi ups using 2x18650 cells and wifi router module. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** Doesn't Matter Supports: No **Infill:** 15 Filament: Noname PETG BlackHow I Designed This Components…

Downloads
84
Likes
24
Rating
5
P
PrintablesICT Avatar

Battery 3x18650 holder

3xBattery holder Print instructions Category: DIY Print Settings Printer: k8400

Downloads
84
Likes
3
Rating
0
P
Printablesaeonden

2x18650 battery case

Double battery case for 18650 batteries that are 65mm long. Cap is snug fit. Print the body vertically. Nozzle: 0.4mm Layer height: 0.2mm Wall thickness: 0.8mm Wall line count: 2 Bottom/top layers: 3 Infill: >10% Skirt/brim/raft: No…

Downloads
82
Likes
8
Rating
0
P
PrintablesMladen0202

Power bank USB-C (1x18650)

This is remix of power bank from other publisher, but this one is for USB-C. It can handle in 5V 2A, and out 5V 2A. Its printed on Anycubic Kobra 2 Pro. Link where you can find the electronic:…

Downloads
81
Likes
9
Rating
5
P
PrintablesBoggz Crawler

FMS FCX18 / FCX24 LC80 Wall Mount

FMS FCX18/FCX24 Wall Mount – Because Your Floor Isn’t a Garage Sick of tripping over your crawler and transmitter? Hang that beast on the wall like the trophy it is. This simple 3D print keeps your RC life tidy and your significant other…

Downloads
78
Likes
14
Rating
5
P
PrintablesDmytro

FNIRSI DPOX180H Oscilloscope Rugged Box

This inserts should be use with Rugged Box Parametric V2 model made by @Whity You will need the original packaging to use it as an oscilloscope holder in the box. Rugged Box Parametric V2 parameters: InnerBoxDepth 185 mm InnerBoxWidth…

Downloads
78
Likes
5
Rating
5
P
Printablesoscarb

Stillness insert - 7.5" e-ink display case for TRMNL DIY Kit and IKEA RÖDALM (13x18cm)

Stillness insert A remix of the Waveshare 7.5 e-ink display insert for Ikea Rodalm Frame that can hold the TRMNL 7.5" (OG) DIY Kit , using a slightly modified base plate from the Triangular Prism 3D Enclosure . Made for my project…

Downloads
77
Likes
7
Rating
0
P
PrintablesBoiledtea

Ikea Skadis Scx24/fcx24m/trx4m/ascent18/fcx18/fcx24 Holder

Designed for the Littleguyracingparts Super 8 axles, which means anything with an wheel to wheel of up to 13.5cm. Stock width is like 9.5cm. Works with stock axles, stock axles+hex extenders, Meus isos, Lgrp super 8s axles without hex…

Downloads
76
Likes
17
Rating
0
P
PrintablesOBA

Stackable Storage Box 184x184x60mm with ventilation

Motivation [ storage boxes for tomato ripening ] During a vacation in France I bought fruit in nice stackable wooden boxes, which I now use for ripening tomatoes on a window sill. As the boxes are stackable, only little space is required.…

Downloads
75
Likes
45
Rating
0
P
PrintablesDucatici

Zyxel Cloud WiFi6 AX1800 Halter NWA50AX

Zyxel Cloud WiFi6 AX1800 halter für Tisch

Downloads
75
Likes
1
Rating
0
P
Printables_3DDaviDLab_

Storage basket 87x180mm

Imagine a long, tapered 3D printed box, with a fascinating texture like a hive of bees. Here is a brief description: This box has a length of 18cm and a width of 8.7cm. The measurement was chosen to fill the 26.3cm piece of furniture with…

Downloads
69
Likes
22
Rating
0
P
PrintablesDonJon

IKEA Samla feets for felt pads 79x57x18cm / 55L

To secure the feets in place you can use hot glue in the grooves on the top

Downloads
69
Likes
12
Rating
4
P
PrintablesBalu

RatRig V-Minion Y-idler 13x18 mm and 14x15 mm

JonS has adapted the Y-idler part to fit a larger idler (13x18 mm). Since I had a 14x15 mm idler and I wanted to test the great ABS optimized RatRig V-minion parts from Adam - Vector3d ( https://github.com/AdamV3D/RR-V-Minion-Mods ), I…

Downloads
69
Likes
10
Rating
1
P
PrintablesLukas K.

Bosch Professional GDX18V-200C mount

This is a remix of Youpak's mount for the GSB18V, which I really like but didn't fit the GDX. Printed in PLA with 20%infill and 3 perimeters.

Downloads
69
Likes
5
Rating
0
P
PrintablesCartridge_Man
18+

The source marked this model as adult content.

Downloads
69
Likes
6
Rating
0
P
PrintablesMissingTexture

angle bracket 18x18x18

angle bracket 18x18x18

Downloads
68
Likes
7
Rating
0
P
Printables3DMentes

DNA 250 3x18650 V2

WARNING This is a really trick build you NEED to know how to solder and how to wire correctly. It is not a beginner task. Triple 18650 DNA 250 mod. Designed for: Fat Daddy V4 LP 510 Fasttech contacts with the tab bend outwards to fill the…

Downloads
66
Likes
7
Rating
0
P
Printablesgskollnau

Bonsai pot 22 octagonal rounded lotus 182x182x87mm

Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.

Downloads
65
Likes
6
Rating
0
P
PrintablesDeeDee

Prusamet spool stackable sorting drawer 2XL 2x180°

High load capacity and easy printing without support Bearing 1pc 606ZZ Screw 1pc M3x12 Neodymium magnets 4pcs circle 4x4 mm Neodymium magnets 4pcs circle 4x2 mm Box: Printed without support. PETG / layer 0.2 / perimeter 2x / fill 0%…

Downloads
63
Likes
39
Rating
0
P
PrintablesLutz

Tandem X18 X18S Protector

You have to bend it a little after printing, cause the gimbals are not horizontal.

Downloads
63
Likes
5
Rating
0
P
PrintablesGodzilla38

Crumb catcher tray (30x18) Perfect for toaster

Despite my toaster having its own crumb catcher, the task of cleaning crumbs off my kitchen is never-ending. But not anymore!

Downloads
56
Likes
2
Rating
0
P
PrintablesDJake

TP-Link AX1800 Access Point Stand

A desktop stand for the TP-Link AX1800 Wall Mounted Access Point. Provides more options instead of wall mounting. If your home does not have in-wall ethernet ports, you can use this mount. Good for renters, unwired homes, or apartments.…

Downloads
56
Likes
2
Rating
0
P
PrintablesXav83

XL - Side box 80x180x40mm

Classic box for storing tools or plastic parts. For installation on the XL bottom profile. Dimensions: 80x180x40mm

Downloads
56
Likes
3
Rating
5
P
PrintablesCatch222

FCX18 K10 Frontgrill Details

This parts are detail for FCX18 K10 frontgrill. Look at picture of the positioning. Parts will be print with a 0.2 mm nozzle. Parts must be glued in the original grill.

Downloads
55
Likes
4
Rating
0
P
Printableswitem

PYD spool fit 180x180

PYD reusable spool that fit 180x180 build plate, like bambulab A1 mini

Downloads
54
Likes
2
Rating
0
P
Printablesjt001sk

FMS FCX18 LC80 inner fenders

FMS FCX18 Toyota Land Cruiser 80 Inner fenders with side steps + display stand This model is designed for the FMS FCX18 Toyota Land Cruiser 80 version with removable fenders . The set includes: Inner fenders with integrated side steps /…

Downloads
53
Likes
3
Rating
0
P
PrintablesHector Romero

Honda VTX1800 5.75in LED Headlight Mount

Wanted an LED headlight, did not want to pay for a bracket so I designed one, will need screws. Have tested with 2 different 5.75in headlights from a company called Braveway , unsure if it will fit other brands but it is likely. Tinkercad…

Downloads
52
Likes
4
Rating
0
P
PrintablesMino

IKEA Shelf Gridfinity 6x18 Baseplate with screws

You may use 15 M4x10-20 button head Screws. Every M4 with a maximum length of 20mm and 3mm head will fit. I used cheap M4x12 TORX screws from the department store. It got a front lip which is 10mm. The purpose is to make it fit perfectly.…

Downloads
52
Likes
5
Rating
0
P
PrintablesUser0180

IKEA YLLEVAD 13x18 cm photo frame wall mount

This is a wall mount for IKEA YLLEVAD 13x18 cm picture frame.

Downloads
51
Likes
3
Rating
0
P
PrintablesAGeekNamedRoss

Apache550_RAK_2X18650

Print this out of ASA or ABS. Insert fits the Harbor Freight Apache 550 Cases here: https://www.harborfreight.com/550-weatherproof-clear-case-56378.html Their SKU is: 56378 Use M3 Self-Tapping screws to mount a RAK19007 Baseboard into the…

Downloads
50
Likes
7
Rating
0
P
PrintablesBenjamin

Xicoy X120, X132, X180, X195, X240 Pump mount zip tie

Simple mount for the large Xicoy pump, the pump is held in place with one zip tie. I printed the mount in ASA, any material will work, no supports required. standart 2 outer walls and 15% infill on request I will hand out the step file

Downloads
47
Likes
1
Rating
0
P
PrintablesTritschi

Repair or Spare Lid for BatteryHolder 2x18650 LiIon (Batterie Deckel)

After I accidently dropped my LiIon battery holder for 2 18650 I did not want to fix this by scotch tape or similar. So I designed a new lid, printed it, little file-off work and here it is! Advantage is if you have several of these…

Downloads
46
Likes
6
Rating
0
P
PrintablesZielony_Drukuje

First layer test model for A1 Mini or any printer with 18x18cm build plate

First layer test model for A1 Mini or any printer with 18x18cm build plate. Model drukuje sie niecałe 20 minut na A1MINI,więc to mało czasu a można sprawdzić swoją pierwszą warstwę.

Downloads
44
Likes
1
Rating
0
P
PrintablesHerb101

H46X18MWC9 small drawer Gridfinity base (6 piece)

Minimalist Gridfinity bases for the smaller drawers on the Husky 46 in. W x 18 in. D 9-Drawer Mobile Workbench Cabinet (H46X18MWC9). I found similar files for the Lowes versions and different sizes for various other Husky boxes, but none…

Downloads
42
Likes
6
Rating
0
P
Printablesdancan13f

Bearing 55x90x18

This is a 55x90x18 bearing. The bearing use POM balls (Amazon, Aliexpress, ...). Use the chain "solid plastic pom ball" to search on internet. Features Internal diameter : 55mm External diameter : 90mm Width : 18mm Balls : 12 POM ball…

Downloads
42
Likes
12
Rating
0
P
Printablesbogdankecman

Y-Splitter using PushFit for M10x1 and 1/2x18

Modified to allow both two different pushfits (e.g. I have 10x1 for 4mm and ½" 18TPI for 6mm PTFE tubes). 4mm PTFE tube comes from AMS and 6mm PTFE tube comes from dry box. If you want to use both 4mm PTFE tubes you can use original part…

Downloads
42
Likes
3
Rating
0
P
PrintablesTucker Anderson

SpudworkX18.2 Chassis Kit - FX118/CR18P

Chassis kit to fix the shortcomings of the long flat skid on the FX118. This has a 10-degree skid and shortened the frame's bottom rail (battery relocated to slider). I ended up with an ESC above the transmission and the rx on the slider…

Downloads
41
Likes
16
Rating
0