Search results: x1c

Sort order

975 models

P
PrintablesMiklos Kiszely

Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS

Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…

Downloads
118,184
Likes
19,104
Rating
4.68
P
PrintablesGekoPrime

Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS (level winder with self reversing leadscrew)

I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…

Downloads
73,229
Likes
11,286
Rating
4.85
P
Printablesthrutheframe

BentoBox v2.0 Carbon filter for Bambu Lab X1C, enclosed P1P & Voron Trident & others?

IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…

Downloads
43,320
Likes
4,636
Rating
4.91

Bambu Lab - Filament Poop Bin - X1C P1S and P2S

This is my remix of the 1.3 version of the popular Poop Bucket from @Mikyleee It is basically an optimisation of the original design but is functionally the same. This remix eliminates a rear wall to use less material and makes overhangs…

Downloads
24,061
Likes
3,084
Rating
4.93
P
PrintablesGuyH

Bambu Lab X1C P1P P1S Filapoop scoop base insert | Plastic ramp for debris removal | NEW v3 update!

UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…

Downloads
21,165
Likes
2,570
Rating
4.85
P
PrintablesAlvin Pan

Bambu Lab X1C plate holder

Remix from original model to fit the plate for Bambu Lab X1C. File uploaded is meant to be opened in Bambu Slicer. [Update] Added stl file for other slicers. Realise that some will want to print this in anticipation for the arrival of…

Downloads
16,963
Likes
1,720
Rating
4.93
P
Printablesflorian greco

Bambu Lab X1 X1C - TPU preset

Hi Everyone, I had trouble having a decent print finish with the official bambu lab and generic preset. After dozen of trials and errors, I finally managed to get great results with TPU. I included the 3MF file for bambu studio with all…

Downloads
16,578
Likes
965
Rating
4.9
P
Printableselumspe

Build Plate ArUco (QR alike) code for Bambu Lab X1C

Print this guiding template for easy placement: 0.20mm Standard @BBL X1C Place diagonally PLA Follow this picture for sticker placement: QR code for all Bambu Lab build plates: Textured plate High-Temperature plate Engineering plate Cool…

Downloads
15,613
Likes
1,805
Rating
4.93
P
Printableseds_3d_shop

Wide Version of Bambu Lab Magnetic Purge Poop Slide for X1C / P1S (side collection of poop, perfect for cabinet!)

My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…

Downloads
13,609
Likes
735
Rating
5
P
PrintablesCoffey72

Bambu labs Tool Box X1C P1P (the original)

I just put some files Together, added some walls and here we are, a Box to store the Bambu Labs Tools and Printheds. Release Note V2: I got some feedback to improve the design: Issue on the outer shell solved (small edge), this is now…

Downloads
12,595
Likes
2,444
Rating
4.89
P
PrintablesButcher9_9

Poop Chute with removable Basket - 3 Sizes for Bambu Lab X1C / P1P / P1S

A Basket and Chute to capture filament poop from the Bambu 3D printers. Its fairly narrow and with a removable basket so that the printer can be moved against a wall or other obstruction. *** Magnets go inside the chute on the inside,…

Downloads
11,554
Likes
823
Rating
4.92
P
Printableskeenzkustoms

Bambu slicer max flow test tower for X1C

Max flow test for bambulab slicer WARNING speeds at the top of the tower set up to 476mms (slower then bambu x1c normal travel speed) so use at your own risk but you have normally stopped the print well before this. if you change it to…

Downloads
9,830
Likes
717
Rating
4.96
P
PrintablesCake3d

Bambu Lab Carbon X1C X1 P1S P1P with AMS Top Tool Storage

EDIT- I've recently purchased some P1S machines and this model works fine on them but I plan on updating the model to work better on them and also incorporate different slots than the original, if you have any specific requests for slot…

Downloads
7,939
Likes
1,949
Rating
4.9
P
PrintablesBen

2mm wall Bambu Lab - Filament Poop Chute - X1, X1C and P1P, P1S

With tree support and 0.2mm layer height: Filament difference: 266.56g vs 294.25g “Model printing time” difference : 4h42m vs 6h17m

Downloads
7,572
Likes
473
Rating
5
P
PrintablesJandrop

Bambu labs Tool Box X1C P1P with Bambu Logo

Descripción I just added the Bambu logo and created the m3f project ready to go. The project uses the cool plate to print the hinge and snap latch and the PEI texturized plate to create a nice texture at the top and the bottom of the box.…

Downloads
7,317
Likes
2,220
Rating
4.89
P
PrintablesAlexM

BambuLab P1P, P1S, X1, X1C, X1E, A1 & A1 mini Temperature towers

For each printer you have a PETG model file and a PLA model file. Please make sure to keep all the gcode changes inside the files, in order to apply the temperature changes All my BambuLab Temperature Tower models: BambuLab P1P, P1S, X1C,…

Downloads
7,051
Likes
225
Rating
5
P
PrintablesAdam L

- ABS/ASA - Tuned X1C Print Profiles for Bambu/Orca-Slicer

Changelog: Added Polymaker Polylite ASA (4/20/23) Fixed the Polymaker ASA profile (4/21/23). I had uploaded the wrong one! Correct one is now uploaded as Polymaker_Grey_ASA_fixed.3mf (4/30/23): Fixed the ASA profile to have the filament…

Downloads
6,683
Likes
406
Rating
5
P
PrintablesRockChewer

Sunlu & JAYO Bambu X1C Profiles for PETG and PLA Plus

For the person who asked for dialed in settings for Sunlu, these are the ones I use. Hope they are useful for you all.

Downloads
5,818
Likes
166
Rating
5
P
PrintablesWorldspawn00

Star Wars Jedi: Fallen Order BD-1 Droid Card Kit for 4 color printing on Bambu X1/X1C or P1P with AMS

Remix designed for use with the Bambu Labs AMS, colors are as accurate as possible to BD-1 in Fallen Order (see reference images) using White, Red, Silver, and Black PLA (PLA+ is recommended for the Body and Silver color, as some of the…

Downloads
5,693
Likes
1,909
Rating
5
P
PrintablesAdam L

- PETG - Tuned X1C Print Profiles for Bambu/Orca-Slicer

Change log: Added a PA-tuned profile for Bambu's PETG-CF (4/19/23). I usually use the Bambu presets.. but I was/am struggling with this filament. I do not recommend it. Added Overture Army Green PETG (4/20/23) Added California Filaments…

Downloads
5,167
Likes
506
Rating
4.62
P
PrintablesEd Johnson

Y-Splitter for the Bambu Lab X1C AMS

Update 2023-08-01 #2: NEW VERSION! I have created a new and improved “no-catch” y-splitter Check out and download the new version here: Bambu AMS No-Catch Y-Splitter PC4-M10 I want to thank everyone who who downloaded and posted makes and…

Downloads
5,037
Likes
600
Rating
4.81
P
PrintablesBryan Haven

Bambu Lab X1C plate holder Feet

Some feet for the Bambu Lab Plate Holder by Alvin Pan https://www.printables.com/model/270579-bambu-lab-x1c-plate-holder to help keep it from tipping over. Currently 60mm wide and friction fit but can be widened and glued if needed. STEP,…

Downloads
4,979
Likes
409
Rating
4.98
P
PrintablesAdam L

- TPU/Flexible - Tuned X1C Print Profiles for Bambu/Orca-Slicer

Changelog: 4/25/23: Added Overture High Speed Clear TPU. This one can print as fast as 10 mm^3/sec. Do not confuse this with regular Overture TPU! Did extensive tuning on this to reduce stringing and maintain best possible quality. Added…

Downloads
4,357
Likes
419
Rating
5
P
PrintablesKYZ Design

Honeycomb Storage Wall HSW - Bambu X1C/P1P Max Wall Piece

Update 27 April 2023 Test wall piece added - small 7 hex piece --- Honeycomb Storage Wall's wall piece - remixed to max out the usable plate on the Bambu X1/X1C/P1P 252x248 is the biggest possible but requires a bit of tinkering to print…

Downloads
4,018
Likes
720
Rating
5
P
PrintablesAdam L

- PLA - Tuned X1C Print Profiles for Bambu/Orca-Slicer

Changelog: (7 /18/23): Added Prusament Marble Grey PLA (5/20/23): updated / retuned Prusament Galaxy Black PLA. Improved PA value. (5/16/23): updated Sunlu_White_PLA+ and Sunlu_Grey_PLA+ with better PA values, min layer times, and retract…

Downloads
3,853
Likes
418
Rating
5
P
PrintablesSTomHacks

Bambu Lab - Magnetic Filament Poop Bin - X1, X1C, P1P and P1S

This is a remix of the poop bucket from @EnricoPulvirenti I basically added 3 holes to be able to add 3 magnets to avoid the bucket to move behind my printer. The magnets I used are these ones, 5x3mm :…

Downloads
3,800
Likes
328
Rating
4.83
P
PrintablesNairod

Fast Start GCode + Improved Quick Bed Leveling - End Retract Back to AMS for Bambu Lab X1 X1C & P1P

V5 For P1P and X1C As this is skipping the LIDAR but keeping the Bed Leveling if desired. Date : 5 March 2023 Improvements: -Improved the overall speed of the start gcode -Reduced the purge of filament by a factor of 21 times 5mm vs 105mm…

Downloads
3,704
Likes
236
Rating
4.67
P
PrintablesDiplomator

Filament Spool Rewinder Upgraded - Bambu Lab P1 / X1 / X1C / X1CC

Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Newer upgrades are on my new upload…

Downloads
3,647
Likes
604
Rating
4.84
P
Printablesthrutheframe

Bento mini for Bambu Lab X1C P1P and Voron V0.2

UPDATE 8 Apr2024 I believe in working with local small businesses when selecting regional vendors. Unlike established companies that are good at managing logistics and sales, small businesses or new start-ups are still learning the ropes,…

Downloads
3,237
Likes
1,052
Rating
4.98
P
PrintablesRincewind76

Voron Stealthburner Printhead for Bambu X1C/X1 Hotend

This is an adaptation of the Voron Stealthburner Printhead to be used with the hotend of Bambu Lab X1C/X1 The Bambu Lab X1C and X1 printers show an impressive performance and quality - using a special hotend. The performance of the hotend…

Downloads
3,168
Likes
487
Rating
4.93
P
PrintablesBlazko

Poop Chute with removable Container | Bambu Lab P2S/P1S/P1P/X1C

Are you tired of picking up all the Bambu poop from the floor? This is the solution! It is a simple chute that collects all the waste coming from your Bambu Lab printer in a small removable container on the left side. It is attached to…

Downloads
3,019
Likes
136
Rating
4.83
P
PrintablesAdam L

- PA/Nylon - Tuned X1C Print Profiles for Bambu/Orca-Slicer

What this is: This is a collection of all of my PA/Nylon and similar (PACF) filament profiles for all filaments I've used of this type. I will update it as I tune new filament brands and colors. They are generally tuned for flow rate ,…

Downloads
2,937
Likes
218
Rating
5
P
PrintablesFlo Gamer

Auswurf Behälter für Bambu Lab X1C/P1P/P1S

Dies ist wie der Name schon sagt ein Auswurf Behälter für den Bambu Lab X1C/P1P/P1S

Downloads
2,909
Likes
48
Rating
4.5
P
PrintablesJohn Barron II

Bambu Lab X1C Poop Chute

This model does require 2 10mm magnets to standup properly. I used 2mm thick magnets and they do sit flush now. If you opt to go no magnets then I'd recommend using tree supports with 0 interface layers. This is a quick and easy way to…

Downloads
2,707
Likes
180
Rating
4.92
P
PrintablesJack Siegel

BambuLab Cable Chain Clip P1P/X1C PFTE Guide - Updated

Update: Since some new printers from BambuLab have a modified cable chain, the originally designed clip did not fit anymore. There are two variants, please check which one you need, otherwise the clip will not fit. The difference is in…

Downloads
2,558
Likes
285
Rating
4.69
P
PrintablesTwotone74

Bambulabs X1C PTFE-Bracket - Extended Version

I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed…

Downloads
2,492
Likes
295
Rating
4.34
P
PrintablesLemanito

Bambu Lab X1C chamber base insert

I took inspiration from another design that has two parts. However, it didn't align perfectly with my printer. Although it might seem similar, I created this design from the ground up. It's 1 mm shorter in height, 1 mm broader, and has a…

Downloads
2,315
Likes
509
Rating
4.93
P
PrintablesMrTeliP

Voron Stealthburner for Bambu Lab X1C/X1 Hotend

Sam Schmidt from the Voron Facebook group designed an adapter for the Bambu Lab hotend for use in the Voron Design Stealthburner. This is remixed from the STEP files he provided to the Facebook group. In the original design, Sam used a V6…

Downloads
2,299
Likes
325
Rating
4.67
P
PrintablesJorge

Bambu Lab X1C - P1P - P1S Original Hotend 3D model

The dimensions are relatively precise (tol of +/- 0.2mm) but the function dimension and maximum dimension, those, are spot on. If you find any error, please let me know. This design is free for the benefit of the community, but if you…

Downloads
2,265
Likes
137
Rating
4.5
P
Printablesdaclasen

Bambu Lab X1C Plate and Adhesive Station

This is a Remix of kjbturok s Bambu Lab X1C Plate and Gluestick Holder to fit both the big 3DLAC Spray Can and the smaller Spray Bottle. Additionally it can hold the Bambu Lab Glue Stick, another Spray Bottle with ~33mm diameter (I have…

Downloads
2,233
Likes
458
Rating
4.94
P
PrintablesAdam L

Scan Tower : Calibrate a Filament's Fan & Temperature Settings (Bambu X1/X1C/P1P or any printer)

This is yet-another-calibration tower, with several tests for overhang/bridge performance, but also other tiny features that I think represent common use cases in detailed 3D printing. One of the things the Bambu X1/X1C/P1P printers…

Downloads
2,218
Likes
267
Rating
5
P
PrintablesCreativus

Small Fast Test Cube - Small Fast Calibration Cube 1cmX1cm 1g of filament! 0.5m!

Small 1cmX1cm test and calibration cube Fast to print (10min) (0.5m, 1g) With many tests on it: Calibration 1cmX1cm or 0.4inX0.4in Overhang test Quality test Half sphere test Bridging test Bed adehision test Stringing test Small details…

Downloads
2,185
Likes
46
Rating
5
P
PrintablesMark

Stable Bambu Lab X1C plate holder

A stand to hold up to 3 Bambu Lab plates or plate stickers. This remix adds small feet to make it a bit more stable. Mine is printed in PETG but PLA should be fine, no supports or brims required and 15% infill.

Downloads
2,173
Likes
260
Rating
4.96
P
PrintablesiKenny

Bambu Lab X1C Wastebin

He Catch every Poo from your Bambu. You must never more grabe behind your printer.

Downloads
2,167
Likes
292
Rating
5
P
Printablessuit

Spool Roller / Holder for Bambu Lab P1P / P1S / X1 / X1C

I've used the Spool Roller by thrutheframe for quite a while until in noticed, that some of the spools on the market won't fit - most popular the Prusament spools, which you need to force on the roller until the front tab breaks off -…

Downloads
2,145
Likes
330
Rating
4.93
P
PrintablesGrzegorz

Original Bambu Lab Scraper Grip and Holder P1P, X1C

PLA or PETG 0.2 mm 15% Infill Thanks for downloading in advance and please don't forget to like this modell!

Downloads
2,145
Likes
87
Rating
5
P
PrintablesShaladdin

Wireless powered Bambu Lab Bento Box Air Purifier for X1C / P1P

UPDATES: April 7th: Added support for 24V 4020 fans on V2 design (should also work for V1 designs). If using 24V fans, trim the boost converter output to 24.0 instead of 12.0 April 7th : Added “w ireless test jig” to help with assembled…

Downloads
2,120
Likes
1,095
Rating
4.9
P
PrintablesJovan

Bambu Lab X1 / P1 / X1C Riser with Storage Drawers, Build Plate Holders, and poop drawer

I needed storage for my X1C. I also didn't like having the poop bucket behind it. This build directs the poop into a large drawer. There are also 2 other drawers with a tray and dedicated space for your hot ends. The recommended way to…

Downloads
1,995
Likes
703
Rating
4.86
P
PrintablesWOWA IIID

Bambu Lab X1 X1C P1P Messuhrhalterung

Für die Montage werden die beiden Schrauben vom Hotend verwendet + 1x M3x14mm und 1x M3 Mutter . Die Messurhalterung gibt es in zwei Ausführungen. Einmal mit Standard 8mm Schaftklemme sowie einmal für 3/8inch und ist somit für alle…

Downloads
1,974
Likes
288
Rating
5
P
Printablesrtj

Filament Splitter for Bambu X1C UPDATED

Bambu Feed Splitter UPDATE Purpose Many versions of these are available on the site. They attempt to solve a basic problem when dealing with the AMS. There are filaments that will not a few the AMS for a few reasons. This means that you…

Downloads
1,966
Likes
285
Rating
4.83
P
Printablesstevensaero

Bambu Lab P1P/X1C full plate first layer test print

Another first layer test print. This print makes use of as much of the bed area as possible, without having to disable the filament cutter standoff. X1C users should print without the flow calibration pattern enabled. Useage 1: A simple…

Downloads
1,950
Likes
88
Rating
5
P
Printableskaziko

Bambu Lab X1C/P1P Ironing Flow Test

Works with either Bambu Studio, or Orca Slicer. Uses default 0.20 Standard @BBL X1C settings. To use with P1P Series printers, you will need to adjust the profile to match your printers settings. The Ironing modifiers should remain in…

Downloads
1,883
Likes
181
Rating
5
P
PrintablesRenba

Bambu X1 X1C P1P Fan Duct

UPDATE 10 Dec 2023 Be care ! Three heatsink dimensions seems to be used by Bambu since the first release… An heatsink 35x18mm for the X1C model. (my case) An heatsink 39x22mm for the P1P model. (validate by one P1P owner, thanks to Oniiz)…

Downloads
1,794
Likes
398
Rating
4.81
P
PrintablesNicholas Kenyon

Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS (level winder with self reversing leadscrew)

The original Pastamatic would sometimes jump the lead screw out. The author did a remix to incorporate a brace into the side rail. This is for anyone who printed the rail without the brace. It will use all existing mount points and…

Downloads
1,753
Likes
222
Rating
5
P
PrintablesAdam L

- PC/PCCF - Tuned X1C Print Profiles for Bambu/Orca-Slicer

Changelog: Added Polymaker Polymax PC (4/23/23). Note that default elephant foot compensation may be insufficient for this filament and you may need to increase it in your slicer profile. Alternatively, you can change the Z-offset for…

Downloads
1,639
Likes
135
Rating
4.67
P
Printablessuit

Side Filament Guide Arm for P1P / P1S / X1C

Side Filemant Guide for the P1P if you use a Side Mounted Spool Arm / Holder It is designed to screw directly into the left upper frame of the printer, for extra stability and in the back of the frame, where it replaces the original PTFE…

Downloads
1,625
Likes
317
Rating
4.9
P
PrintablesEbolo

Bambu Lab X1C P1P Foldable Side Spool Mount

Parts needed: Bolt M4x45 Bolt M3x6 (x2) Bolt M3x10 (x2) Nut M3 (x2)

Downloads
1,624
Likes
210
Rating
4.89
P
PrintablesOurAngryBadger

Instant Y-Splitter for Bambu AMS X1C P1S P1P

I call this the "Instant" version of a Y-Splitter, because it requires no separate purchase of Bowden connectors, just print all necessary parts! Basic Features: No extra parts needed, click and print. PTFE tubes held in place securely by…

Downloads
1,624
Likes
158
Rating
4.9
P
Printableserickson85

Bambu Lab X1-Carbon X1C Purge Poop Slide - Magnetic

Bambu Lab X1-Carbon X1C Purge Poop Slide - This low-profile slide is specifically designed to fit snugly between your printer and the wall, making the most of the available space on your workspace. Thanks to its magnetic attachment, the…

Downloads
1,561
Likes
193
Rating
4.76

Bambu Lab X1/X1C/P1P Complete Hotend Assembly Box

A great and space saver solution for storing your complete hotends by Bambu Lab. No support needed.

Downloads
1,542
Likes
216
Rating
4.79
P
Printablesstevensaero

Bambu Lab P1P and X1C – Bed Level Test Pattern

Updated 04.13.2023 I've added a .stl file for the X1C that avoids the extra purge line in the rear left corner of the machine. You'll need to run the print without the automated flow calibration. Use a known calibrated filament profile…

Downloads
1,530
Likes
77
Rating
5
P
PrintablesTheLightSpeed!

THE BEST BAMBULAB X1C AND X1 LIGHT UPGRADE MOD - X1C LOWRIDER COB LED SYSTEM

this is a low profile LED COB strip mod for the Bambulab X1C and X1 printers. This prints in four pieces and is securely held together with 4ea M3x16 screws. I recommend this kit.…

Downloads
1,467
Likes
125
Rating
4.47
P
PrintablesDingusDude

Bambu Lab X1C Small Parts Storage Box w/Hotend Assembly Holders

I have many more versions and styles of these boxes over at MakerWorld. Please check them out! There’s an updated version of this box as well as some with customizable dividers and even an empty box that you can put whatever you want in…

Downloads
1,432
Likes
179
Rating
4.63
P
PrintablesNairod

Bambu Lab X1 X1C Fan Muffler Improved

Latest Version I recommend N52 Grade Neodymium magnets to make sure they stick well

Downloads
1,363
Likes
265
Rating
4.77
P
PrintablesKeyboardCrawlin

Bambu Lab Purge/Poop Bin for X1 or X1C

I really like the original bin but I needed it to be just a bit more narrow to fit the rack I'm using. The only change I made to the model is the depth of the bin from the rear of the printer, this extends 72mm from the back of the printer.

Downloads
1,359
Likes
63
Rating
5
P
PrintablesBrad @ FTBT 3D

Hexagon Steel Sheet and Tool Holder for Bambu Lab X1C / X1 / P1P

Here's a good looking and reduced filament option for a steel sheet / bed holder for the Bambu Lab printers (X1C, X1, P1P). It has room for up to 4 sheets or 3 sheets and a slot for bed stickers. It also has a spot for the BL scraper and…

Downloads
1,340
Likes
363
Rating
4.78
P
PrintablesTobi aus LE

Bambu Lab X1C/P1P Hotend Box

Aufbewahrungs- und Transportbox für das komplette Hotend (inkl. Lüfter, Silikonsocke, Thermistor und Heizelement) der Bambu-Drucker. Mit Sichtfenster damit man sieht welche Düse verbaut ist. Die Box für einzelne Düsen findet Ihr da →…

Downloads
1,303
Likes
308
Rating
4.93
P
Printablesenque

Y-Splitter for the Bambu Lab X1C AMS

Remix of @EdJohnson 's design, with the following changes in order to avoid snags; AMS and Spool entry PC4-M10 connector threads previously did not bottom out as the outlet port did, so made all PC4-M10 entry threads bottom out (metal nut…

Downloads
1,293
Likes
179
Rating
5
P
PrintablesTobi aus LE

Bambu Lab X1C/P1P Nozzle Box

Aufbewahrungs- und Transportbox für die sichere Aufbewahrung aller Düsen der Bambu-Drucker. Mit Sichtfenster damit man sieht welche Düse in der Box liegt. Die Box für das komplette Hotend findet Ihr da →…

Downloads
1,257
Likes
316
Rating
5
P
PrintablesYoupak

Bambu Lab X1C P1P Spoiler / Chamber Waste recovery for debris removal

A simple print that forms a ramp at the front of your Bambu X1C making it easier to scoop out any stray bits of plastic. Some modifications to original design : Only One part instead of two (rotate it at -45° on bambu plate for print) =>…

Downloads
1,208
Likes
155
Rating
4.5
P
Printables3D Chihuahua

Bambu Lab (A1, P1, P1S, X1, X1C) Build Plate Coaster

100 x 100 x 4mm Bambu Lab build plate drink coaster with auto-bed leveling. I printed it using PETG but any filament should work. There are two versions. One with text and purge lines and one without (blank top). For an A1 Mini version…

Downloads
1,170
Likes
533
Rating
4.95
P
Printablesthrutheframe

Bambu Lab X1C Clog Pusher Remix

I like the design of Bounet's clog pusher. I wanted to include a ptfe tube within to help guide the filament when doing a cold pull to clear out the clog. I designed 2 versions to have the 2 screws secured by either nuts or brass inserts.…

Downloads
1,165
Likes
350
Rating
4.78
P
Printablesarod2051

HSW for Bambu X1C or P1P - 4 Layer print

This should only fit the Bambu X1C or P1P This takes KYZ's updated panel and adds a single layer of Bambu 'Support W' breakaway filament. It should only use 6.3g of Support W for 4 panels of HSW. I wanted to stack panels so that the print…

Downloads
1,141
Likes
223
Rating
4.5
P
PrintablesMK Design

Build Plate Holder - Bambu Lab X1C P1P P1S

Please see and try my own "Holder for build plates" of the Bambu Lab printers X1 and P1 series. Design has a logo of Bambu Lab. You can place there maximum 4 plates. Holder is stable even with one plate inserted in it. Cuted places for…

Downloads
1,123
Likes
119
Rating
5
P
PrintablesGamingFaxe

Bambu Lab X1C and X1E Top Glass Riser - PIP - NO TPU

Hey :) I remixed the “ Bambu Labs Carbon X1 Top Glass Riser for LED's ” Now you can print it without TPU and it works better, we made some updates to the file! 1. 2x 3h printing time - 2 parts fit on the X1C. 2. no TPU needed anymore…

Downloads
1,119
Likes
200
Rating
4.87
P
PrintablesBanditFPVprints

X1C X1 P1P PTFE Bracket remix

Remix to avoid rubbing front cover of extruder

Downloads
1,117
Likes
175
Rating
4.82
P
PrintablesAneoPsy

The X1C Top Light (Over-engineered)

The X1C Top Light (Over-engineered) Glass Top Led Raiser mod + anti glare shield BLLEDController compatible Fit 12mm ledstrip. Fit 15x1mm (10-20mm wide) EVA Foam tape for better isolation between 3dpart and glass top. Features: The top…

Downloads
1,117
Likes
248
Rating
4.85
P
PrintablesRonYoung

PTFE clip for bambu lab X1/X1C

pls glued it on your drag chain

Downloads
1,105
Likes
138
Rating
4.75
P
Printablesap.engineering

Bambu Lab X1C/P1P/X1 - Interior Poop Chute Cover/Seal

There's a big gap between the poop chute and the interior volume wall. If you look from the side, you can directly see the electronics, meaning that hot air from the printing volume will go to the electronics and also cooling air from the…

Downloads
1,099
Likes
212
Rating
4.67
P
PrintablesChaotiK DawN

Upgraded carriage, sled and filament guide for Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder

Update - 04/09/2024 Redesigned the complete model from scratch because some "friendly" user notified me of possible flaws in the design. Repositioned the holes (in sled as well as the filament guide) and made them a bit smaller (sled) to…

Downloads
1,096
Likes
122
Rating
3.8
P
PrintablesWolfie3D

Bambu Labs X1C Exhuast Adapter

Bambu Lab X1C Exhuast Adapter for 75.5mm rubber cuff. Pictures show orange PLA at 0.28mm layerheigt (adaptive). Use a standard m3 thread tap to thread the three unoccupied holes with minimal damage (no drilling required). There is space…

Downloads
1,077
Likes
293
Rating
4.75
P
PrintablesRamathorn15

P1P, X1, X1C 90 Degree X and Y Axis Holder / Jig

I read somewhere that people have had success with removing ghosting/belt lines by positioning the X and Y gantry at 90 degrees during the belt tensioning process. I decided to make a quick model to help hold the gantry in position during…

Downloads
1,028
Likes
248
Rating
4.87
P
PrintablesBonfiggy

Bambu Lab P1P/X1/X1C Anti Vibration Feet

Perfect fitting antivibration feet printed in TPU with 15-20% infill for best results. No supports needed! Seems to help a good bit as well with the shaking/noise!

Downloads
1,011
Likes
116
Rating
4.92
P
PrintablesGP3D_Designs

Optimized Poop Chute for P1P, P1S, X1C

Optimized Magnetic Print-in-Place Poop Chute for X1C, P1P, P1S Printers It is designed to be easily printable, provide well balanced storage capacity, while also respecting the bambu 256x256y256z printer build volumes. Features:…

Downloads
990
Likes
62
Rating
5
P
PrintablesIconic FAB

Bambu Lab X1 / X1C / P1P Activated Carbon Air Filter (Refillable)

General I was unable to find a refillable activated carbon air filter (box) for Bambu Lab X1 / X1C / P1P so I rolled up my sleeves and designed my own version. Features Allows to save a decent amount of money using this instead of the…

Downloads
988
Likes
218
Rating
5
P
Printableszombetto

Bambulab X1/X1C - P1P/P1S Sainsmart TPU Profile for Bambu Studio

Profile for Sainsmart TPU that I use mainly for fpv drones. My Bambulab P1P has hardened steel nozzle and gears and aux part cooling fan. Is usable on all Bambulab printers though. I've printed a lot of colors and models. Enjoy :)

Downloads
975
Likes
48
Rating
5
P
PrintablesGuyH

Bambu Lab X1CC AMS Colour flush testing - Test process

I think the settings in Bambu Studio are on the very safe side when it comes to how much filament is flushed during a change. I wanted a way to test what would be optimum. I thought about how best to approach this and came up with a plan.…

Downloads
947
Likes
115
Rating
5
P
PrintablesFrantisek23

Prusa Mk3/4, Bambu X1C, P1, A1 Build Plate holder with eject button

Big update: New, Simple Version of The FNT Plates storage for Prusa MK3/4/Core One has been released. You can find it here. Hi, A have many build plates for both Prusa and Bambu printers and very limited space for storage. So I decided to…

Downloads
940
Likes
449
Rating
4.75
P
PrintablesOmega3dProject

Temp Tower BambuLab X1C 200-230

Classic temp tower 3mf file is designed to work on the Bambu X1 C

Downloads
937
Likes
28
Rating
0
P
PrintablesTD1 3D

Filament Spool Winder Auto Tensioner Bambu Lab P1 / X1 / X1C / X1CC - Psych0Mod

---------------------------------------------------------------------------------------------------------------- Greetings everyone, and thank you for joining me to explore my Auto Tensioning Spool Donor Mod. This innovation exerts…

Downloads
913
Likes
233
Rating
5

Detailed 3D CAD Model of X1C & AMS

Scale accurate 3D model of X1C printer and AMS. Main purpose is to serve as a reference when designing mods. The exterior and frame is quite detailed. Interior still needs work. Used model from GrabCAD as starting point…

Downloads
909
Likes
28
Rating
0
P
PrintablesLightValen

Bambu Lab X1C Excess chute bucket

Loved the original design. I have a very small workspace and I cannot reach around or behind the printer so I made the bucket thinner and added a cutaway at the front so I can remove poops.

Downloads
885
Likes
90
Rating
4.83
P
Printableschiz

X1/X1C Lead Screw Shield

PLEASE DO NOT DOWNLOAD/PRINT THIS VERSION ANYMORE! There's an updated Self-aligning Lead Screw Shield version now available! This new version solves the binding issue and blocked camera views. RELEASE HISTORY 2023-11-17 : Version 2 - now…

Downloads
882
Likes
281
Rating
3.91
P
Printablesgartnix

Bambu Lab X1C / P1P Flushing Volume Calibration

In order to properly calibrate the purging/flushing volumes, I took the original file, set the color change point to be at the bottom of the tower, and followed the instructions in the original thingiverse description to get the color…

Downloads
877
Likes
242
Rating
5
P
PrintablesNairod

6025 NF-A6x25 5V PWM Noctua Fan Holder for Control Board for Bambu Lab X1 X1C P1P

6025 Fan Holder for Control Board I used Noctua NF-A6x25 5V PWM Bambu > Noctua Dark Gray>Black (GND) Black>Yellow (+5V) Light Gray>Green (RPM/Tach) White>Blue (PWM)

Downloads
863
Likes
278
Rating
4.85
P
Printables3DThinker

Waste Chute / Basket Speed Print - Bambu Lab X1C

Waste / Poop chute for the BambuLab X1 Carbon. Used different wall thicknesses to help with prints times. Below slicer times are based of of using a x1c with a .24mm layer thickness. .8mm wall - 3hr 15min 1.2mm wall - 4hr 14min 1.5mm wall…

Downloads
857
Likes
29
Rating
4.67
P
PrintablesSabre Design

Bambu lab X1C P1P P1S Base Edge Ramp / Insert | Filapoop scoop | Chamber ramp easy debris removal | one piece

Base ramp insert for easy filament debris removal, one piece design. Can be printed in one piece on the bed of X1C, P1P and P1S. Designed for optimal fit and easy install. Best in PETG for temperature resistance, added print profiles to…

Downloads
842
Likes
94
Rating
4.44
P
PrintablesLayerCraft

Bambu Lab X1C Prusament PETG Profile

Das ist mein aktuelles Profil, das ich für Prusament PETG verwende, und es funktioniert hervorragend mit der 0,4-mm-Düse und mit der 0,6-mm-Düse. Die .3mf-Datei sollte alles enthalten, was zum Speichern in der eigenen Profilbibliothek…

Downloads
838
Likes
16
Rating
0
P
PrintablesThomas Lord

Bambu Labs P1P\P1S\X1C Magnetic Hydrometer Mount

This is a magnetic hydrometer mount for enclosed Bambu Lab printers. It was designed for a 40mm hydrometer and uses 2 6x3 magnets. The magnets should press fit in (with some elbow grease) and it mounts to the rails on the sides of the…

Downloads
828
Likes
180
Rating
5
P
PrintablesDM4DS

Bambu Lab PEI Sticker - QR code - X1C Video with cheap chinese PEI detected as Original PEI :)

Use whatever sheet you like with the BambuLab X1 X1C P1P, be detected as PEI sheet… Made a video about that beginning of 2023, just a few days after I received my X1C: The BambuLab X1C detects the “china” cheap sheet as original PEI sheet…

Downloads
826
Likes
53
Rating
0