Search results: x3m

Sort order

464 models

P
PrintablesCAD-Guy

Remix: Fish Refrigerator Magnet with 8x3mm Magnet

I love the original fish magnet from kennyd1gital but I don't have the exact magnet size, so I made this remix for 8x3mm magnets. You can stick a maximum of 3 magnets in, but in my opinion 2 are enough :) Please also give a like to…

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant

Downloads
328
Likes
71
Rating
5
P
PrintablesMax666

Bottle-Cap/Kronkorken 8x3mm Neodym Magnet Inlay

Inlay für Kronkorken um einen 8x3mm Neodym Magnet wir z.B.hier: https://amzn.to/2FPV8sI anzubringen. Kann als Pinnwandmagnet oder für Kühlschränke verwendet werden ;) Print instructions Category: Organization Print Settings Printer Brand:…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
94
Likes
20
Rating
5
P
PrintablesDowdle

BLLed Magnet Cover for 6x3mm magnets

BLLed Magnet Cover for 6x3mm magnets i had left over from a voron build they are push fit

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
46
Likes
5
Rating
4

Mosquito Net Magnets for 10x3mm magnets

Mosquito Net Magnets. Magnets size: D: 10mm, H:3mm As the original, magnets are pressed into the holes and locket with glue(but personally, I use them without glue). The Windowmagnet can be glued on a strong adhesive tape, which is then…

Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
16
Likes
3
Rating
0
P
PrintablesRoboMagus

Gecko fridge magnet 8x3mm

Remix originally from Thingiverse: 1363148 (I think). Scaled up and bottom chopped off slightly for better printability. Has 2 holes for 8mm round magnets 3mm thick.

Downloads
1,723
Likes
316
Rating
4.96
P
Printablesspdwalrus

Mushroom Shelf magnet with 6x3mm magnet holes

Mushroom Shelf magnet with 6x3mm magnet holes

Downloads
1,209
Likes
300
Rating
4.75
P
PrintablesSummons

Crocodile Skink with 7 hidden 6x3mm magnets (1 pause) and 2nd pause for manual filament change

I loved the original and wanted magnets that were hidden and a pause to add some more colour to the print... I printed in Bronze silk then Rainbow silk to get the colour. 1st pause in the print is at the top of the magnets. At the pause,…

Downloads
779
Likes
197
Rating
4.93
P
PrintablesRork

Improved Magnetic DeWalt bit holder - 6x3mm magnets, easy insertion and removal

This is a remix of a very nice design, but updated to improve on a few things: Mounting tabs shortened by ~1mm to fit the DCD805/DCD800 (and possibly other newer model drills/drivers). Should still fit older designs. Magnets mount via…

Downloads
723
Likes
137
Rating
4.88
P
PrintablesChristos

Bambu Lab X1 Y-Splitter (8X3mm Magnets)

I remix the model from LayersFarm https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec/files in order to fit my 8x3mm magnets.

Downloads
684
Likes
95
Rating
4.8
P
PrintablesBen

M6/M10 PTFE Tubes connector (magnetically) PC4-M6 / PC4-M10 / 6x2mm & 6x3mm magnets

I added support for 6x3mm & 6x2mm Magnets. If you change the parameter in the original fusion file, the shape changes. I used the Push/Drag tool to change the hole for the magnets, to keep the shape of the model. Please leave a like ❤, if…

Downloads
609
Likes
110
Rating
5
P
PrintablesThor

Gecko Fridge Magnet - 10x3mm version

Remix of ( https://www.thingiverse.com/thing:3337602 ) Modified to accept a 10x3mm magnet since I had more of those than the 8mm ones. Thanks to HEIados for including a very nicely done Fusion 360 file to work with! To get the 10mm magnet…

Downloads
608
Likes
58
Rating
5
P
Printablesomiedude

One Piece Luffy Magnet (8x3mm magnets)

- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: The example pictured used a layer modifier to add ironing from 3.5-4.5mm. It's not necessary, but I did not test without it on. If you have never done…

Downloads
573
Likes
119
Rating
5
P
PrintablescHaOt166

Bambu AMS Disconnect Tool - 5x3mm Magnet - Dual Color

Bambu AMS Disconnect Tool with 5x3mm magnet for dual color print Remix of both versions (body from remix, letters from original) for dual color print and with an inset for a 5x3mm magnet. Thanks to @Jody and @HaraldGeisler for preparatory…

Downloads
535
Likes
74
Rating
5
P
PrintablesShaladdin

6x3mm Magnets 3D Benchy Display Stand

I liked the original benchy stand as it was a great way to show off how my different filaments printed and looked like, but it requires you to glue the pieces together. I didn't like the idea of gluing 3d printed pieces and, once glued,…

Downloads
514
Likes
115
Rating
5
P
PrintablesNeme.C

Воронка для маслозаливной горловины автомобиля Тойота, двигателя 4GR-fse, резьба М37х3мм. Funnel for oil filler neck of Toyota car, 4GR-fse engine, thread M37x3mm

Воронка для маслозаливной горловины автомобиля Тойота, двигателя 4GR-fse, резьба М37х3мм Funnel for oil filler neck of Toyota car, 4GR-fse engine, thread M37x3mm

Downloads
453
Likes
25
Rating
5
P
PrintablesGelintry

Bambu Poop Chute - 10x3mm Magnets

This is a remix of the Bambu Poop Chute by Fantasy3DPrintsShop , modified to suit my needs This uses 10x3mm magnets to attach to the metal plate on the back of the BambuLabs X1C, P1P and P1S. The support under the end where the magnets go…

Downloads
405
Likes
19
Rating
0
P
PrintablesWired

Shrunken 8x3mm magnet Axe Magnet

Original: https://www.printables.com/model/217840-axe-magnet I liked the original, just wanted it smaller, so I scaled it down and changed the magnet size to 8x3mm (wxh) Smallest version of the original that could support 8x3mm magnets I…

Downloads
404
Likes
94
Rating
5
P
Printables3DPHUB.NET

Bento Box 2.1 combination HEPA and activated carbon filter (6x3mm vertical pull orientation)

Remove harmful fumes and VOC from the air to keep you, your family and your pets safe. This mod uses proven HEPA and activated carbon filters with powerful 5015 radial fans to achieve a 5.5x improved filtration over the axial version!…

Downloads
353
Likes
70
Rating
5
P
PrintablesDingus

Bambu Lab Y-Splitter with PC4-M6 pneumatic connector and 6x3mm magnets

Tweaked the PC4-M6 remix of this fantastic design to add 6x3mm magnets.

Downloads
347
Likes
41
Rating
5
P
Printablesxander1

CORE One Purge/Trash Bin - Remix for 6x3mm magnets

This is a remix of CORE One Purge/Trash Bin by @nicohirsch for use with 6x3mm round magnets. There are two versions available: Holes for magnets are 3.0mm deep Holes for magnets are 3.2mm deep They exist because the first layer squish…

Downloads
343
Likes
51
Rating
5
P
PrintablesY.woo

Magnetic Bambu Poop Chute using (QTY4) 8mmx3mm disc magnets

The original model was the right width and depth I needed since my Bambu doesn't have that much room behind it from the wall. This remix model gives it a bit more height and uses pressed in magnets. no glue on the magnets. just some elbow…

Downloads
334
Likes
28
Rating
5
P
Printablesomiedude

Futurama magnet (8x3mm magnets)

“So, my sadness makes perfect sense…and I do have vague memories of people refusing to breed with me.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to…

Downloads
327
Likes
105
Rating
5
P
PrintablesCattus Printus

Makita LXT bit holder with 6x3mm magnets for drill/drivers

A remix of Cmarlow bit holder adapted to 6x3mm magnets which were esier to get for me. Also a few changes compared to original design to improve on design: Reduced depth of holes in which bits go, magnets are strong enough to hold them in…

Downloads
316
Likes
51
Rating
5
P
Printablesltlowe

CORE One Nozzle replacement tools - 8x3mm magnet remix

CORE One Nozzle replacement tool remixed with space for two 8x3mm round magnets so it can be stuck to the side of the printer. Versions included for for Prusa and E3D, Sock and No Sock. For detailed information about the Prusa vs E3D…

Downloads
312
Likes
66
Rating
5
P
Printablesomiedude

One Punch Man (8x3mm magnets)

- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…

Downloads
293
Likes
84
Rating
4.75
P
Printablesomiedude

LoTR Narsil / Anduril Magnet (8x3mm magnets)

- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…

Downloads
288
Likes
92
Rating
5
P
Printablesomiedude

Goonies Logo Magnet (8x3mm magnet)

“Now get out from there, you're ruining the painting!” “You're ruining my joke.” 8x3 magnets to be glued in. Examples printed with 15% infill. If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal).…

Downloads
276
Likes
80
Rating
5

Bambu Lab - MAGNETIC Purge/Flush/Poop bucket for X1, X1C and P1P - Slimer Version with 8x3mm magnet holes

The Part that goes behind the printer is around 40mm wide and over all its only 70mm wide. The holes are also widen for 8mm magnets. You can find the original here:…

Downloads
268
Likes
22
Rating
5
P
PrintablesPSchaug

Magnetic curtain connector clip for 6x3mm magnet

Liked the original idea, but did not have the correct magnets available. Remixed for 6x3mm magnets. Attached Fusion 360 file, step file and STL of the remix. Everything else as the original.

Downloads
248
Likes
40
Rating
0
P
Printablesomiedude

BMO Adventure Time Magnet (8x3mm magnets)

- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: I used a layer modifier to add ironing from 3.5-4.5mm. This allowed for better quality of the outline, to avoid gaps etc., without ironing every top…

Downloads
245
Likes
71
Rating
4.5
P
PrintablesPrint-Head

Gear Shifter (now with 6x3mm magnets!) | REMIX

Gear Shifter Fidget (6x3mm magnets) | REMIX (note: Modified to fit eight 6x3mm magnets instead of the original 5x3mm. And parts have to be glued together in the end.)

Downloads
241
Likes
40
Rating
5
P
Printablesomiedude

Beavis Magnet (8x3mm magnet)

“We’ll get cars and like, we’ll get jobs, and we’ll have to like, mow lawns and scrub the grill, but we’re never gonna score ever! It’s gonna suck!” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4…

Downloads
238
Likes
65
Rating
4.88
P
PrintablesK3DD

HSW Magnet 6x3mm Insert

A simple remix for magnets 6x3mm

Downloads
227
Likes
45
Rating
4
P

Magnetic Factorio Transport Belt (8x3mm)

These models are modular in design and made to connect to each other on a surface like a refrigerator.

Downloads
224
Likes
77
Rating
5
P
Printablesomiedude

Macho Man Magnet (8x3mm magnet)

“Cream of the crop!” - 8x3mm magnet to be glued in - 20% infill used in example -example printed on a mini+ using prusament filament (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check…

Downloads
223
Likes
45
Rating
5
P
Printablesomiedude

Butthead Magnet (8x3mm magnet)

“Beavis, I have seen the top of the mountain, and it is good.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my…

Downloads
223
Likes
66
Rating
4.88
P
Printableskitlaan

Magnetic Cable Management Clips for 10x3mm magnets

Found @Edward's model for 10x3mm magnets, but the needed to redesign for spouse-factor. STLs provided for a few cable-bundle sizes. In theory, no support is needed – the magnet hole depths have a 0.3mm tolerance to allow for…

Downloads
221
Likes
38
Rating
5
P
Printablesomiedude

Adventure Time Gunter Magnet (8x3mm magnet)

- 8x3mm magnet to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…

Downloads
218
Likes
65
Rating
5
P
Printablesomiedude

Danny DeVito (8x3mm magnet)

“This is ham, soaked in rum.” - 8x3mm magnet to be glued in - 20% infill used in example -example printed on a mini+ using prusament filament (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal).…

Downloads
216
Likes
38
Rating
5
P
PrintablesXelinor

Prusa Core One Magnetic Corner Plugs (6x3mm Magnets)

Corner plugs for the Prusa Core One using 3 6x3mm magnets. Reccomended to print in PETG or other temperature resistant materials.

Downloads
214
Likes
63
Rating
4.8
P
Printablesomiedude

The Karate Kid Miyagi Magnet (8x3mm magnet)

“It's okay to lose to opponent. It's never okay to lose to fear.” - 8x3mm magnet to be glued in - 20% infill used in example -example printed on a mini+ using prusament filament (PLA) If you’d like to shoot some spare change or a dollar…

Downloads
205
Likes
60
Rating
5
P
Printablesomiedude

Regular Show - Benson Magnet (8x3mm magnets)

The park is being audited today. Pops tried to pay the taxes with lollipops This is, by far, my favorite magnet design yet. Don't tell the other magnets…or you're fired. MORE REGULAR SHOW MAGNET DESIGNS COMING SOON! 8x3mm magnets to be…

Downloads
203
Likes
67
Rating
5
P
Printablesomiedude

Jake and Finn Adventure Time Magnet (8x3mm magnets)

- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: I used a layer modifier to add ironing from 3.5-4.5mm. This allowed for better quality of the outline, to avoid gaps etc., without ironing every top…

Downloads
196
Likes
38
Rating
0
P
Printablesomiedude

Grouchy Smurf Magnet (8x3mm magnets)

“Me, I don't like parties.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal).…

Downloads
195
Likes
44
Rating
5
P
Printablesomiedude

Samurai Jack Magnet (8x3mm magnets)

- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…

Downloads
195
Likes
55
Rating
5
P
Printablesomiedude

One Piece Straw Hat Pirates Mark (8x3mm magnets)

- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…

Downloads
192
Likes
33
Rating
5
P
PrintablesKaktus

LilyGo T-Embed CC1101 back shell with external antennas and power switch 6x3magnets,screws, without magnets

1 version - with magnets 6x3 2 version - with screws, but without a hole for the switch 3 version - without magnets By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in…

Downloads
183
Likes
14
Rating
0
P
Printablesomiedude

Super Mario Magnet (8x3mm magnet)

“Here we go!” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). Quick Update:…

Downloads
180
Likes
58
Rating
5
P
Printablesomiedude

Regular Show - Muscle Man Magnet (8x3mm magnet) UPDATED

Always guard your pepperonis. 8x3mm magnet to be glued in…you know who else glues stuff in? MORE REGULAR SHOW MAGNETS COMING SOON (4 total!) 8/2023 - Redesigned the entire model to be more muscle-y, bro. New design allows for easier…

Downloads
179
Likes
30
Rating
5
P
PrintablesBrix

Magnetic slider fidget with 3x3mm magnets

As the summary says, this is a remix of NotSure's design but uses 3x3mm magnets instead of the original 6x3mm magnets. It uses 32 magnets per piece instead of 8, and is arranged 4x8 magnets instead of 2x4 magnets as with the original.

Downloads
176
Likes
29
Rating
0
P
Printablesomiedude

Garfield Pajamas Magnet (8x3mm magnets)

- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) (prusament orange looked so good!) If you’d like to shoot some spare change or a dollar my way, you can donate here…

Downloads
174
Likes
40
Rating
5
P
Printablesomiedude

The Hobbit Bag End Door Magnet (8x3mm magnets)

- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…

Downloads
170
Likes
28
Rating
0
P
Printablesomiedude

Avatar Aang Magnet (8x3mm magnets)

- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: I used a layer modifier to add ironing from 3.5-4.5mm. This allowed for better quality of the outline, to avoid gaps etc., without ironing every top…

Downloads
167
Likes
34
Rating
5
P
Printablesmathiasl

PC4-M6 and M10 with 6x3mm magnets

Needed a version with PC4-M6 and both M6 and M10 with 6x3mm magnets instead of 5x5mm.

Downloads
166
Likes
32
Rating
5
P
Printablesomiedude

King of the Hill Hank Magnet (8x3mm magnets)

- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…

Downloads
161
Likes
34
Rating
5
P
Printablesomiedude

Quagmire Family Guy magnet (8x3mm magnets)

“What can I say? I'm a Vagittarius. Oh!” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate…

Downloads
160
Likes
34
Rating
5
P
Printablessalcatroppa

Bambulab P1S Poop Chute - 6x3mm magnets

Remixed from Bambulab P1S Poop Chute to support for 6x3mm magnets

Downloads
156
Likes
10
Rating
0
P
Printablesvhubbard

Enclosure zip-tie-plugs and 8mmx3mmx3mm-washer

The Original Prusa Enclosure has many extra holes and zip tie hangers for customization as needed. These are great, but the enclosure with all the holes wont build heat well. To close the holes, I wanted something like the plastic push…

Downloads
155
Likes
26
Rating
5
P
Printablesomiedude

The Lost Boys Magnet (8x3mm magnet) UPDATED

You'd better get yourself a garlic T-shirt, buddy, or it's your funeral . 8x3mm magnet to be glued in. Example print used 15% infill. 8/2023 - Redesigned this model, as it needed some fixing. Turned out fantastic with a layer color…

Downloads
152
Likes
53
Rating
4.67
P
PrintablesMichael Frey

Dewalt Bit Box Remix for 6x3mm magnets

This is a remix for different size magnets. Now each bit has it's own magnet. The magnet slots are closer to the bits and thus hold on better. The slots allow magnets of 6x3mm but I have used 5x3 successfully. Additionally I have added a…

Downloads
152
Likes
43
Rating
4
P
Printablesomiedude

Ghostbusters Ray Magnet (8x3mm magnet)

“Personally, I liked the university. They gave us money and facilities, we didn't have to produce anything! You've never been out of college! You don't know what it's like out there! I've WORKED in the private sector. They expect…

Downloads
152
Likes
52
Rating
5
P
Printablesdarthi

Custom Tonie Tag with 20x3mm magnet for Toniebox

Hi there, this is my custom Toniebox tag for DIY Tonies. It works with the SLIX tags and a 20mm / 3mm magnet. After inserting the NFC tag and magnet, you have to glue the two pieces together. You can optionally glue an custom tonie figure…

Downloads
149
Likes
23
Rating
0
P
Printablesomiedude

Roger American Dad magnet (8x3mm magnets)

“I like Lena Dunham. It's nice to see someone with my exact body type succeed.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) (BIG THANK YOU to ChellaBelleM3d for…

Downloads
147
Likes
42
Rating
4
P
PrintablesSp1y3rS

PARKSIDE magnet battery support 12v (8x3mm magnets)

I made in ABS with a original Prusa MINI

Downloads
146
Likes
19
Rating
0
P
Printablesomiedude

Red Dwarf Magnet (8x3mm magnet)

Your nickname was never Ace. Maybe Ace Hole. Face up print with layer color changes: Example used 15% infill 8x3mm magnet to be glued in (New) Face down multi-material print: Same infill File is tagged ‘multi’ in the filename Paint bucket…

Downloads
139
Likes
34
Rating
4
P
Printablesomiedude

King of the Hill Bobby Magnet (8x3mm magnets)

- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…

Downloads
138
Likes
36
Rating
5
P
PrintablesMoixo

HSW magnet inserts (10x3mm)

Honeycomb Storage Wall (HSW) insert magnets based in the original inserts of the model of RostaP. Combine with any HSW, and all existing accessories to bring a bit more of order to your kitchen (if put in the door or side), or to your…

Downloads
136
Likes
57
Rating
0
P
Printablesomiedude

The NeverEnding Story Magnet (8x3mm magnet)

To the winch, wench! 8x3mm magnet to be glued in. Example print used 15% infill, but…we don't care whether or not we care. If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile…

Downloads
134
Likes
37
Rating
5
P
PrintablesNaografix

Prusa CORE ONE purge wiper/bin with 6x3mm magnets

A purge wiper/bin designed to hold six 6x3mm magnets for Prusa CORE ONE

Downloads
132
Likes
16
Rating
5
P
Printablesomiedude

Ghostbusters Venkman Magnet (8x3mm magnet)

“Right. That's bad. Okay. All right. Important safety tip. Thanks, Egon.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a…

Downloads
131
Likes
48
Rating
5
P
PrintablesPrint-Head

HANDLE with MAGNETS (8x3mm) - Cantilever tool/sewing box | REMIX

HANDLE WITH MAGNETS (8x3mm) - Cantilever tool/sewing box | REMIX note: Just print the “female version" twice and insert the bars with the magnet-holes instead of the original ones . For the yellow 215x215 box in the pictures, 3 magnets on…

Downloads
130
Likes
27
Rating
5
P
Printablesomiedude

Avatar Uncle Iroh Magnet (8x3mm magnets)

- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: I used a layer modifier to add ironing from 3.5-4.5mm. This allowed for better quality of the outline, to avoid gaps etc., without ironing every top…

Downloads
129
Likes
31
Rating
5
P
Printablesphilon

PRUSA XL Purge trays - 10x3mm magnet

Purge tray for the Prusa XL with three 10x3mm magnets embedded in the part. Sticks to the underside of the steel sheet. Pause the print at Z=3.2mm to add the magnets. Recommended to print using a material with high glass temperature, such…

Downloads
128
Likes
17
Rating
5
P
PrintablesDan

Hydra Logo Magnet MMU 8x3mm

Remix of Hydra Logo Magnet. Split into two parts to make printing with the MMU easier. Also resized the magnet holes to be 8x3mm

Downloads
126
Likes
31
Rating
0

Print In Place Box With Magnetic Closure 6x3mm buttons

Remix of the original i found here. Print In Place Box With Magnetic Closure

Downloads
126
Likes
15
Rating
4.67
P
PrintablesMatthew Parsons

Mag Insert For Honeycomb Wall - 2 (10x3mm Magnets Per Insert)

I made these because I needed them. I use strong Neodymium 10x3mm magnets in many of my projects and I hope this model helps you. Please share pictures of what your wall looks like! Make sure you add super glue to the holes before putting…

Downloads
126
Likes
32
Rating
0
P
PrintablesMike D

Side Storage, adjusted for 8x3mm magnets

This is a remix of Prusa Core One Side Storage by Swing King Design They mentioned that it may be helpful to increase the magnet size, and I had 8x3mm ones handy. This works perfectly for my needs, thought I'd share it with others. I…

Downloads
125
Likes
20
Rating
5
P
Printablesomiedude

Ghostbusters Spengler Magnet (8x3mm magnet)

“Try to imagine all life as you know it stopping instantaneously and every molecule in your body exploding at the speed of light.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament…

Downloads
125
Likes
45
Rating
5
P
PrintablesThe Next Layer

15x3mm Magnet Holders (Various) for Multiboard

These models were created for me by Fiverr seller Gaurav Dubey as part of a video project. They allow you to add a 15x3mm magnet to your multiboard, in 3 different ways: Regular Snap Double-Sided Snap Large Thread Choose whichever you…

Downloads
124
Likes
29
Rating
5
P
PrintablesMesmerizingGaby

Filament cutter 60° (Magnets - 8x3mm)

This model is a remix of the famous filament cutter 45°. I found that a 60° angle cut is more likely to fit smoothly in the mmu2s tubings so ive designed this model out of Fusion360. It have been designed to house 8x3mm Neodym magnets…

Downloads
123
Likes
15
Rating
4.5
P
Printablesomiedude

Shake Magnet (8x3mm magnets)

“You touch those and your G.I. Joes are gonna be M.I.A., my friend! and then who's gonna call Little Momma Joe, to tell her that her boy ain't coming home, cause SOMEBODY was asleep on guard duty!” The Master Shake magnet—just add your…

Downloads
120
Likes
40
Rating
5
P
Printablesomiedude

Mr T Magnet (8x3mm magnet)

“Mother, you treat her right!” - 8x3mm magnet to be glued in - 20% infill used in example -example printed on a mini+ using prusament filament (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here…

Downloads
120
Likes
33
Rating
5
P
Printablesomiedude

Firefly Ship Magnet (8x3mm magnet)

“Well, they tell ya, 'Never hit a man with a closed fist.' But it is, on occasion, hilarious.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot…

Downloads
120
Likes
43
Rating
5
P
Printablesomiedude

Regular Show - Rigby Magnet (8x3mm magnet) UPDATED

It'll save your life someday! It's okay to yell this and then begin hambonin' when you feel threatened. (check out my profile for more Regular Show magnets) 8/2023 - Updated the entire design. I'd been wanting to redesign this one for a…

Downloads
119
Likes
22
Rating
5
P
Printablesf3g4t0

derived Pico 4 Increased FOV facial interface gasket v4, by John Doe, with 6x3mm magnets holes

I just edited the very good mod by John Doe to accomodate bigger 6x3 magnets (superglue suggested)

Downloads
119
Likes
10
Rating
5
P
PrintablesDmitri K

23mm Shirt Button with 4x3mm holes

Shirt button/classic button I made for my wife. She actually used it for a fox she was making out of yarn, and needed some larger button holes for the eyes. So here is my first design on thingiverse. The button has 4 holes each at 3mm.…

Downloads
116
Likes
29
Rating
0
P
PrintablesJaySideWay

Magnetic Hook 8x3mm Magnets

Simple remix changing the hole size from 6x3mm to 8x3mm.

Downloads
116
Likes
11
Rating
5
P
PrintablesAndrew Nelson

Govee Bluetooth Hygrometer (H5075) Magnetic Mount (12x3mm Magnets)

Govee Hygrometer (H5075) Magnetic Mount (12x3mm Magnets) For mounting Bluetooth connected Hygrometer in printer, drybox, etc. H5075 keeps history so you can keep track of dry box humidity and temperatures over time. No support Press the…

Downloads
114
Likes
12
Rating
0
P

Secret Lab 2020 Titan Chair - Cloud Swap 6x3mm Magnet Remix

Remix to use common magnet size from Voron printers. How many you use is up to you. Unlikely to need to fill every hole.

Downloads
114
Likes
8
Rating
5
P
PrintablesMrFlippant

Prusa XL filament purge catch tray for 6x3mm round magnets with room for up front nozzle cleaning brushes.

Changed length and magnet pockets size. 6x3mm round magnets are required for this version. Three for each tray.

Downloads
113
Likes
21
Rating
5
P
PrintablesMechVince

2" Magnetic Exhaust Pipe Mockup System 15x3mm magnet

This is a simple system of pieces that use 15mm x 3mm magnets to snap together for mocking up and prototype routing exhaust or other pipe routing. This base design is set up to represent 2" outside diameter pipe, approximately 50.8mm. In…

Downloads
113
Likes
17
Rating
0
P
PrintablesCattus Printus

Makita LXT double bit holder with metric 6x3mm magnets for drill/drivers

A remix of mgx bit holder adapted to 6x3mm metric magnets. Also made bit holes a bit more shallow so its easier to pull bits out. Requires 12x 6x3mm (2 for each hole) cylinder magnets. Magnet holes are tight enough that no glue is needed…

Downloads
112
Likes
23
Rating
5
P
Printablesmportus

Bambu Lab P1PP1SX1 poop chute 10x3mm magnets

Poop chute for Bambu Lab P1PP1SX1

Downloads
112
Likes
7
Rating
5
P
Printablesjohndoe

Magnetic hygrometer bracket 8x3mm magnets

A barely-a-remix of thrutheframe's excellent round hygrometer mount for dry boxes. The only change here is that the magnet holes have been widened out to accommodate 8mm by 3mm round magnets instead of the original 6mm ones. Works…

Downloads
109
Likes
15
Rating
5
P
PrintablesCAD-Guy

Escher Lizard 8x3mm Magnet

Like keejo's magnets just with bigger magnets, they are even compatible to keejo's . Dimensions 35x36x4,4mm Non printed parts One magnet with 8x3mm for each Lizard. Print instructions I printet it our of PLA with the 0,2mm quality setting…

Downloads
108
Likes
28
Rating
5
P
PrintablesTimberlineFPV

Magnetic Fidget Switch(6x3mm Magnets

Remixed the model to fit 6x3mm magnets. It might be a tight fit, and it really depends on your magnets. You might have to make the hole a little larger.

Downloads
108
Likes
15
Rating
4.8
P
PrintablesBrian Eusebio

EDC Magnetic Tip Screwdriver with Ball Bearing (6x3mm)

This is a play on the EDC Screwdrivers that have a ball bearing at the end. Build requires a 6x3mm Magnet, Ball Bearing and M3*16 screw. Enjoy!

Downloads
107
Likes
37
Rating
5
P
Printablesomiedude

Night Of The Living Dead Logo Magnet (8x3mm magnet)

“Don't you know what's goin' on out there? This is no Sunday School picnic!” 8x3mm magnets to be glued in. Example print used 15% infill…because there was no more room in hell! If you’d like to shoot some spare change or a dollar my way,…

Downloads
104
Likes
25
Rating
5
P
PrintablesJ Peset

SKADIS MAGNETIC HOLDER // SKADIS SOPORTE MAGNÉTICO (25x3mm)

Printed in PETG .2mm layer, supports, 25% infill. No necessary glue for magnet.

Downloads
104
Likes
44
Rating
0
P
PrintablesTimmer

BambuLab X1C magnetic hepa filter 6x3mm magnets

21/07/2023; i reuploaded the lid, as some users reported a corrupted file This is a remix of @cushmail_454332 design for a Hepa filter. I did not have 5x5mm magnets on hand, only 6x3mm. It needs a total of 20 magnets. It still has the…

Downloads
104
Likes
24
Rating
5