810 models
A simple holder for an ID badge or card. Portrait orientation. Easy access to card while maintaining a secure hold. Print face up. Minimal supports needed. Enforcers painted onto underside of tabs.
Festool yardstick holder - simplify your tool management Where do you currently store your yardstick? Print your own yardstick holder and make your everyday work easier and more productive. Don't have a Festool yardstick yet? Click here…
For more credibility resize down to 80% size of downloaded models. Model here is more popular (more used) version of “the key” from the French / International competition show “ Les Clés De Fort Boyard ” There is also half-version for…
Update 2024-11-17: After ~3 years of near daily use, it broke. I've made a few subtle updates to the model that should both strengthen the fracture point, and clean up a model a bit. I had used an older design daily for a year, before it…
I created a dedicated spot to put your discarded or destroyed cards. It's made to fit sleeved or unsleeved cards. Layer Height: 0.26mm Infill: 10% grid (I wouldn't go any lower due to internal overhang) Build Time: 5.5 Hours for two prints
this is a 20 yard dumpster i created to mimic dumpsters i own. will have updated model with swinging gate for realistic
It's always happy hour in your backyard, so why not give the bees a cocktail bar! This is my take on mosselini1's Insect Water Station. Printing Instructions Choose your size: Small or Large. Go to the appropriate folder…
This model works great at least when the darts are printed at 120mm long. We printed it on a prusa xl and it was really fun to just see how high we could chuck them and see them stab into the ground almost every time
The 2022 remake of the classic Scotland Yard is called the Sherlock Holmes Edition and is a very nice game, the updated game mechanics add a lot of fun. Unfortunately the pawns and tickets were just thrown in ziplock bags, luckily the box…
A simple OpenScad Lanyard Name Tag Open the OpenScad up and customize away. If takes in an included Alex Armstrong svg file. It may not be practical (a little on the big side) But I had to make it after the idea popped in my head. The SVG…
My family likes "expanding floss" - it just works better. We learned that you can buy it on a giant, XL spool with 273 yards. The only tricky bit of this project was a way to efficiently cut the floss to length... why would we try to…
CZ: brzdička ke šňůrce od spacáku, do brzdičky vložte standardní pružinku z propisovací tužky, ale brzdička se dá na šňůrce zafixovat i pouhým vytažením kloboučku. Tisk: naležato, s podporami jen na desce a s límcem (10 mm) EN: brake to…
That's right, I've made even more of these. Novelty ID card holders appropriate for most lanyards and ID cards. Suitable for portrait or landscape. Holds just one card. Doesn't require supports, can be taken straight off the print bed and…
Designed to be compatible with Cherry MX style key switches. Just add one of those, a key cap, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The only overhangs are inside the hole where the…
We're back with a chonkier, more balanced, even more fun fidget! Designed to be compatible with Cherry MX style key switches. Just add two of those, some key caps, and a lanyard. It's recommended to use XDA form factor key caps, but…
By special request, more keys, more fun! Designed to be compatible with Cherry MX style key switches. Just add four of those, some key caps, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The…
Print kit card with PLA different colors and put them together with mixed color parts.
What's more fun then 4 keys? 9 keys! Designed to be compatible with Cherry MX style key switches. Just add 9 of those, some key caps, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The only…
Fun for keyboard fans and gamers! Designed to be compatible with Cherry MX style key switches. Just add four of those, some key caps, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The only…
DJI Mini 3 - Mini 2 - Air 2 - Air2s Lanyard Mount It holds itself. You can leave it on the RC all the time. Version 2 This version for those who wants to fit controller to tight cases when the lanyard mount is already mounted. ( I…
🇪🇸 ¡Bienvenidos a Granada, España! Welcome to Granada, Spain! Roberto from @MaquetasCNC brings to the MiniWorld3D catalog an all-time favorite and top attraction: The Alhambra of Granada , in southern Spain! Specifically, this is a…
These models were made with small children in mind. Perfect for toddlers learning animal names.
What's more fun then 2 keys? Four keys! Designed to be compatible with Cherry MX style key switches. Just add four of those, some key caps, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The…
Simple paracord bead. Print with supports.
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- 6ts manual operated crane, as it was used on larger…
This is a remix of CosmicSubspace Simple Card Wallet: https://www.printables.com/model /297285-simple-card-wallet/remixes The cards can be inserted or pulled out without needing to touch the clips. Design is made for print in place, but…
Don't forget to scale, the model is small. I'm really interested, where you guys come from. Pls. leave your country and maybe city in comments :-)
Electrical Grid Series - Switch Yard Power is no small commodity in the war for freedom across the bloody wastelands of the home worlds. This is the Electrical Grid Series Switch Yard. Guaranteed to move with electromotive force all of…
Remixed @third-dimension-labs clean WASD keyswitch/cap fidget. Opened up the string hole so it can hold 3/32 paracord. Added a chamfer to the bottom edge. Add your own switches and caps. There are 3d printed caps on this site.
Made an iPhone 13 Mini Case with holes for a lanyard and some hex design in the back. Print laying on the back in TPU with supports. Once printed i suggest to make a cut underneath the buttons so they can be pressed more easily.…
This model was designed so I could replace the boring colour one I was given at work. Its designed to be printed in either ABS or PLA for rigidity and the overhangs should be printable on most printers (tested on Ender 3 and FF Adventurer…
Print Settings Printer brand: Creality Printer: Ender 3v2 Rafts: No Supports: No Resolution: 0.2 Infill: 7%
Mavic Mini Phone Holder with Lanyard Clips I remixed the phone holder from YohannG from scratch to suit my needs. Changes included: Added notches made specifically for the Mavic Mini controller Designed for very minimal support needed…
Hey a lanyard bead! Lanyards are a simple thing, but its the only thing I keep on my keyring, I mean I keep a swiss army knife on my keys as well. And if I didnt have keys I would put a lanyard on my swiss army knife. Everyone knows its…
Similar to https://www.amazon.com/SHANSHUI-Lanyard-Tether-Universal-Smartphones-Black/dp/B083158CBJ When importing STL swap the print face around as the tether hole is thicker by 1mm. I recommend printing with TPU, I used 95A eSun…
Sunflower 3D printed Yard art Print 2 of the sunflower black and one of the solid Yellow background glue together Pole mount using pole mount. DXF for laser cutting included Cut out and paint Print Settings Printer Brand: Creality…
A 1:48 Scale 30 Yard Construction Dumpster
The original adapter to attach a lanyard to the mobile phone was broken. I designed a printable replacement. I started with a 0.6mm version, then made it 1mm in the stressed area. Use at own risk. Be careful with material selection and…
I made this as a nice case to hold my school ID (I took it out for the photo) that I'm required to wear every day. I made a vertical and horizontal that you can use based off personal preference. If the tolerance is too tight for your…
Yes, the world needed yet another Benchy display rack. There are some nice designs out there…but I wanted to display as many Benchys as I could, in the smallest space possible, on my desk. I did not want to mount anything to the walls, or…
Print using 3 or more walls to give strength. This is designed to print quickly, provide a secure mount for a double lanyard and still allow access to the door.
This wheel give to the YARDFORCE robot mower the capacity to clim slopes of 45° Print instructions big print, more then 24 h, I needed to place a cooler on the extruder motor , important no support for printing I used ngen orange 1.75 mm
Very simple print that holds the YubiKey securely along with a badge on the lanyard. Users of the previous clip provided feedback that some Yubikeys are slightly larger, and are not easy to remove. This model should work with all slightly…
3d Print you own paracord lanyard, Just add a M3 6mm bolt and a mini carabina Blog post - https://wp.me/pKY3w-D5
A simple adapter to add a lanyard to your phone using Quad Lock.
Need some cool objective markers in a graveyard setting? I made a set for your fantasy table that really punches it up a notch! This set is a set of headstones, with optional numbers to use for marking important locations. If you like…
Updated 9/8/19 - Heavy duty hooks now comes with a washer hole to increase strength. double hook for rake, shovel, etc. Enjoy Sherm Other creations: https://www.printables.com/@shermluge_65353/models…
Pretty accurate 1:29 scale model of a 10 Yard rollaway dumpster I rented when replacing the roof on my house. Recommend resin printing.
Massive shoutout to the model used for inspiration! The measurements and primary design are from their model. I just felt some improvements could be made and did these How to print Print with regular supports and a support interface for…
Covers to put your YubiKey 5 or 5C into when you can't leave it in your computer. Designed for attaching to a lanyard with a loop end or keychain. Design was inspired by the Thingiverse post, but CAD work was done by me in Fusion360 for…
A 1:48 Scale 20 Yard Construction Dumpster
A Lanyard or Medal Safety Clip This will take a 1 inch or 25mm wide ribbon. Pulling on the lanyard will result in the clip pulling apart so it doesn't get stuck. Once printed test the pushing together and pulling apart of the two pieces,…
This is simple lanyard mount for DJI RC Pro. You need 2 M4x10.
Simple Toothpick with (or without) lanyard ring. Tool that fits in the pocket clip slot of the leatherman tools such as the wave, charge or surge. Version with ring and without. Longer toothpick and short. Do not care about material, you…
Here is another archmage item. Hope you find it useful for your sceneries! To support my work and get access to my miniatures please visit https://www.patreon.com/roleplayingminiatures Print Settings Printer Brand: Creality Printer: Ender…
Deutsch: Ich habe zwei Hüllen für das normale iPhone 13 entworfen, die MagSafe kompatibel sind. Beachte allerdings, dass die Hüllen 3mm dick sind und die Aussparung für MagSafe auf der Rückseite einen Durchmesser von 65mm hat. Entworfen…
A replacement bottom case for the Apple Airpod Pros with a lanyard loop large enough to accommodate 3mm diameter paracord. Designed to be a snug fit onto the Apple Airpod Pro charging case with a lanyard loop to prevent the case from…
Tent stake pusher compatible with MSR Groundhogs and Easton stakes. MrCitizen did all the work on this, but I wanted a way to attach it to my tent stake bag, so I added a hole. Printed with a little support for the center hole. I used PLA…
A simple card holder to hang from a lanyard. Easy access to card. No supports needed.
I designed this to be able to add a safety break away closure for lanyards, specifically, lanyards used around the neck. It's a quick connect, disconnecting closure which could be used on any small string. Just scale it up for larger…
Hey there, i like to modify or clean my Spyderco knifes but it is always annoying to remove the scales from the lanyard plug. So I designed this Lanyator to solve that problem. It works like a simple chain tool and ensures an efficient…
The original statuary is from the ‘ Scan the World ’ project, see the remix info below for details. The plane cuts and model orientation were designed to minimize filament usage so that each model prints with close to 1 spool of filament…
Public domain collection of car parts by Britdawgmasterfunk . Originally uploaded to Blend Swap .
This is a worm gear for a Nelson garden sprinkler tractor. There are two versions, one with 14 tpi threads included in the model and one uncut for tapping. A friend of mine printed it in ABS with 100% infill and it worked fine.
This is a case for the Heltec T114 V2 for you to dangle on a bag, backpack, or set of keys as a neat “charm”. It includes space for a GPS module, as well as a RAK PCB antenna or OEM coil antenna. Materials Required Heltec T114 V2 nEF52840…
Inspired by The Legend of Zelda: Ocarina of Time MiniWorld3D celebrated Halloween of 2018 with this model of the Graveyard in Kakariko Village full of stunning details, from the tombstone inscriptions to the entrance to the Shadow Temple!…
Smartphones put power in the hands of everyday people to hold awful behavior to account, but holding up a phone makes you a target. This print lets you use your phone as a body camera, and attaches to a shirt, lanyard or backpack. Add an…
Make your own lanyard with some ribbon and this hook/clip. Many can be printed in one go. I recommend PETG for these. PLA will probably wear out faster and may not be as springy but should also work.
Scaled for 28–32mm play, but resizable for 65mm or larger formats. Optimised for FDM printing on a 0.2 mm nozzle with 0.08–0.12 mm layer height. eSun PLA+ Supports: minimal 15 STLs including: 1x Scrapyard Goblin Chief 10x Scrapyard…
This is the GPS mount I'm using to mount the UBLOX RTK GPS antenna inside my YardForce Classic 500 mower. In the picture you can see a mount for an external IMU, but this won't work since the UBLOX antenna has a magnet in its base.…
In my previous job, I was required to wear a lanyard that held my employee badge. Lanyards are great for holding pens that have the metal clips. However, putting on/taking off can be tricky depending on the type of pen/clip tension. I…
A BoatYard for Benchy! Sometimes, your Benchy is in for cheap repairs. The Gulf of Mexico is no picnic, and only a boatyard will do for scrubbing off the barnacles and plugging a few leaking holes! So get your Benchy down south and get…
Graduated folding measuring stick three feet (0.9144 meter) long Simple, yet fun printer torture test. Works well to test multi material printing. In addition to measuring, this ruler makes for a great desk fidget toy. Yellow fish used…
See the model I remixed it from for details of how to use it I printed it on a Bambu X1C Bambu Lab PLA Basic (Mistletoe Green) 0.4 nozzle, 0.2 layer height 3 wall loops 20% Gyroid infill no support (the model has a built-in Break-Away…
To attach the braket to the controller you simply use two M4 x 8mm screws. I designed it so that the charging port is still accessible , but the “Host” and Micro SD ports unfortunatly aren't, because than it would've been way bulkier. And…
Freelance model of a small yard office. This small building is ideal for any scene requiring a utilitarian office, such as rail, junk, or contractor yards. Parts are separated for easy painting or printing in different colours.
Replacement lanyard mount for Focus ST trunk cover. I imagine it should work for all focus hatchbacks. Found this model useful? Buy me some filament!…
This is a modified version of my other Spyderco Mule Team scales, with a hidden Lanyard hole and smooth, solid hex and outline hex surface texturing. These scales were designed around an S45VN blade, I'm not sure what the external…
I printed these on my Bambu Lab CX1 on Fine detail 0.12 mm layer height on the “silent” slow setting Hatchbox Glow PLA . They turned out great. I took some small paracord inner rope to make the small lanyard bit and some regular orange…
These spike are a quick model that lips onto the inside edge spikes of the original wheel. they should work by just clipping them over the inside spikes on each wheel making 8 extended spikes per wheel. The 17 mm spikes are probably too…
Mount for the DJI RC (e.g. for the DJI Mini 3 Pro) to snap in a double lanyard. Access to the USB C (charging) port is possible. To access the other ports (i.e. SD card) the mount would need to be removed, but this is possible within less…
If you want to hang your DJI RC-N1C controller around your neck, especially during longer flights or when you need your hands free, while doing some different things, I was inspired by some simple lanyard mounts available online (like…
Cascade Wallet V2 With Lanyard or Keychain Loop My sister needed a holder for her children's Yoto cards. This is the same great Cascade Wallet V2 by @Hugo with the simple twist of adding a small hole to hang it on a lanyard without…
This is a simple, robust and minimal holder to attach an ID card to a lanyard. Holds a single card securely. Sized for precise credit card size, can be scaled for other sizes. Just 2m of filament required. Print Recommendations | PETG…
This is a GoPro Lanyard mount. I wanted something to attach a GoPro to a standard tradeshow lanyard so my 4 year old could wear the camera around and take videos and photos without worrying about him dropping it. Solidworks 2016 file…
No supports are required. Use a brim to ensure adhesion of the thin contact profile of the design.
this is a halyard clip we use on our Melges 24 for securing the tack line and Halyard. Category: Sport & Outdoors
With this product you can quickly convert any yard or meter stick into an easy to use set of Calipers that are large enough to use on everyday objects like furniture or pipes. While not in use, this product is small and easy to store or…
When I go skiing, I always am nervous pulling my phone out on the chairlift, worrying that even though I'm gripping it as hard as I possibly can… a bump on the ride is going to cause me to drop it. If I had even the slightest sense of…
This is a 1:32 scale 4-yard dumpster designed as a background prop for scale models, dioramas, and scenes. The dumpster includes separate lids . The original goal was for them to snap on and swivel, but I never quite got that mechanism…
DJI Mic Mini magnetic lanyard. I use a 2mm cord. The holes are 3mm for the cord. In case you are using magnet delivered with the Mic Mini, just press it in an you are good to go. In case you would be using other magnet, add a drop of glue…
Gecko yard Art Laser cut or 3D print Paint and assemble Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: MatterHackers.com PLA white Notes: Gecko yard Art Laser cut…
Komboloi beads for type 1 (100) Paracord and lanyard beads for type 111 (550) paracord. Set of beads in different sizes to print your own komboloi. Also added 4 basic Paracord 550 lanyard beads (But are no use in the komboloi bracelet)…
Double Key Switch for double clickiness.
This is a remix of the GoPro handgrip by Kart5a. I just added a hole in the bottom back of the grip to be able to put a wrist strap or lanyard. Print Settings Printer Brand: Monoprice Printer: Maker Select Plus Rafts: Doesn't Matter…
Introducing my latest creation: Lanyard EDC Threaded Cylinder Container . Key features: You can remix & improve the model freely! All the files are orientated for convenient printing in STP, STL & 3DM formats! No supports are required!…
We had a Halloween party this weekend for a bunch of ballerinas and they loved this witchy ring toss game. Print as many rings as you like it. We did them in different colors for teams. .2 layer height No supports Wait until the plate is…
From the original -- We're back with a chonkier, more balanced, even more fun fidget! Designed to be compatible with Cherry MX style key switches. Just add two of those, some key caps, and a lanyard. It's recommended to use XDA form…
I liked IggiDee 's original idea, but I also had a few ideas of my own about a couple of the pieces. Having little to no sculpting talent of my own, I am very grateful for the talent and generosity of the designers whose work I have…
Snap clip for standard 20mm wide lanyard strap and ID badge. Prints clean with no additional supports required. Reliable and secure. 2023-10-19 update | added wider version: Lanyard-Clip-3-cards-wide-2C01-0_MatthewGTaylor.STL . This will…
