POLYGONAL FEMALE HEAD - Dummy 13 Version 1
This female head part is designed to seamlessly integrate with Dummy 13 (Version 1) body design. Perfect for seeing the facial features!
- Downloads
- 1,873
- Likes
- 359
- Rating
- 5
765 models
This female head part is designed to seamlessly integrate with Dummy 13 (Version 1) body design. Perfect for seeing the facial features!
This male head part is designed to seamlessly integrate with Dummy 13 (Version 1) body design. Perfect for seeing the facial features! New Version!
This is a case that will fit the Lilygo T-Internet-POE board, I am using it for a bluetooth proxy for Home Assistant. But made it with other uses in mind as it has an opening for the TF card and the USB-C connector, so those can be used…
A bolt-on quick-release mount for the Cygolite Dash bike light to replace the stock rubber strap that would not keep the light in place. Trail approved! One-handed quick-release! Minimal footprint! Easy installation without removing…
Pen Holder POLYGON Gyroid + Cubic (2 Diameter) Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Version 80 inside diameter (corner to corner): 82mm Version 100 inside…
A very stable and elegant phone stand. Includes a fully customizable OpenScad file that lets you change all dimensions and angles very easily and check where the approximate center of the gravity of your smartphone will lie.
Case for LILYGO® TTGO VGA32 V1.4 Controller you will need the LILYGO® TTGO VGA32 V1.4 Controller…
This model is sized for the Lilygo T-Display S3-display, not the Lilygo T-Display-S3 AMOLED device which is slightly narrower. If you're interested in the model for the AMOLED device it is available here . Required: a Lilygo T-Display-S3…
A polygon heart. You need at least 5% lightning infill. For a more stable stand, you can make the bottom heavier with infill or more bottom layers. To prevent some defects on the surface you should use these settings for the top layers:…
Snap-together case (no hardware) for this board. Features a window for ePaper display, switch, USB port, and detents for the boards 4 buttons. http://www.lilygo.cn/prod_view.aspx?TypeId=50031&Id=1169&FId=t3:50031:3 My Github repo for…
Skoda CityGo, Seat Mii, Volkswagen Up compatible. The 3mf includes a fuzzy skin to remove the visual layer lines. It looks great. Printed in Prusament. with paint on support to guarantee removability. PETG version no need for enclosure…
Modern Easter bunny decoration. This model stands at 6 cm tall and can be scaled up according to your preference. Its interior is hollow to conserve filament. If you have a textured plate, try to lower your Z offset. Wishing You a Happy…
Layer Heigh 0.08 Initial layer 0.2 walls 5 x 0.08 Line supports Printing 80mm/s Very smooth and no need for post processing. (only support remooving) you can change settings for print and make it faster and less smooth, it will take about…
Print with supports on buildplate only. Organic supports are much easier to remove than the default grid ones. The mount fits perfectly for me but YMMV.
Hierbei handelt es sich um einen Eierbecher mit Polygon und einem Behältnis für die Eierschale. Empfohlene Skalierung: X: 115 mm Y: 75 mm Z: 30 mm Dauer: 4 Stunden und 30 Minuten Material: PLA, 37g / 12,30 und 195°C Drucktemperatur
Made a housing for an electronic board for connecting to the EMS+ bus of a Buderus Heating Pump and reading all data via an Lilygo esp32-s3 for home automtion integration via mqtt. See ems-esp-project: https://emsesp.github.io/docs/ See…
The file has two parts into which the lilygo T-SIM boards will fit. There are a variety of boards with different SIMCOM chips, but all the ones I have seem to fit ok. The parts then locates the board within a 40mm Floplast drainage pipe…
Commercial Use and Attribution Notice Alley Chat TD1 © 2024 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted…
A fully parametric polygon fidget. Printing tips: Decrease the printing speed Decrease the cooling fan's speed For a robust handle use 3 walls Ensure a good bed adhesion How to customize your own? You will need to download FreeCAD , a…
polygon vase with wrap-around plate modern minimalist vase design with polygon pattern that sits elevated in a wrap-around plate dimensions in mm > x: 110 · y: 110 · z: 230 photos show printed in marble white pla and matte black pla…
This is a model of Final Fantasy 7 Cloud Strife in simple polygon form. When I printed it I scaled the model to 15%. Some of the additional files I attached have already been scaled to match that 15%. This also includes: Buster Sword (to…
squared polygon planter with polygon plate modern minimalist planter design with polygon pattern that sits elevated in a polygon style plate ~full dimensions in mm > x: 115 · y: 115 · z: 125 included are the profiles at full size and 80%…
This head part is designed to seamlessly integrate with Dummy 13's body design. Perfect for seeing the facial features!
Polygons with 3d-printed strands as mechanical reinforcements. To introduce stiffness to a polygonal frame multiple triangles are inscribed into the shape, changing rotation with z-height. The triangles themselves are strands of filament…
This item is a low poly face mask perfect for masquerades or Halloween. It has an open mouth and holes for the nose so you can breathe ease, although you might sweat. There are slits on the sides for an elastic head strap. It's sized to…
Commercial Use and Attribution Notice: Alley Chat TB1 © 2024 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted…
That's a case for the famous LILYGO T3 LoRa device, with room for a standard 3.6v LiPo battery. No screws needed, you can just print it and close it with the device inside. No supports required. PETG is better but PLA also works well.
This is the classic version, there is a new version here . Commercial Use and Attribution Notice: Alley Chat TS1 © 2024 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use,…
Collection of M3 female-female self-taping spacers I use for my own projects. ID:2.9mm OD: 6.0mm Length: 4-30mm Printed in resin. Did you like it? Please, leave a like and a comment. If you made it, share the show us. :)
Plantygon is a modular geometric stacking planter. Designed to accommodate my growing collection of succulents, it is based on the truncated octohedron which can tesselate in 3D space. This allows each planter to stack together in any…
This is an updated version of my TS1 case. The biggest change is the ends come down from the front the same way as the TB1 and the upcoming RAK case for consistent styling and function. This one doesn't require you to remove the SMA nut…
This is a model of Final Fantasy 7 Sephiroth in simple polygon form. This model has already been scaled to match my other prints. His hair part on the front is difficult to print, so there is a separate model that piece of hair in case it…
This is a model of Final Fantasy 7 Tifa Lockhart in simple polygon form. I printed this at 15% scale to match the other figures I printed. In my print I haven't panted the eyes but there is graphic I plan to print onto sticker paper and…
Enclosure for the LilyGo TTGO T-Display ESP32 development board. The enclosure provides two button levers that will activate the board buttons, a port for the USB C connector, a recessed leaver for the reset button on the board. It also…
This is a model of Final Fantasy 7 Aerith (Aeris) Gainsborough in simple polygon form. I printed this model at 15% scale. The Ribbons in her hair are too thin to print… so there is another file that is the ribbon a bit thicker (print it…
Not my design, remix of ( https://www.thingiverse.com/thing:3388581 ) This fixes issue where figure wasn't flat on the build plane. Rotated -0.2 degrees to make it flat and cropped a bit to prevent overhang around the edges. Also:…
This is a model of Final Fantasy 7 Red XIII in simple polygon form. If you downloaded the other Cloud Strife Model, I mentioned I had to scale it to 15% when printing. For this model I ended up fixing his tail and hair because they were…
I printed a skull found on thingiverse (https://www.thingiverse.com/thing:518109/files), and we got the idea to use it as a gear shifter knob for my car, as I had already woodturned a shifter a while back. The skull is scaled to 40% of…
Lilygo T Display S3 AMOLED Case ****************************************************************************************** **Update 20Feb24 ** Added a new top file modified to suit the new S3 which now has a flat acrylic embedding of the…
This is a model of Final Fantasy 7 Vincent Valentine in simple polygon form. This model is already scaled to match the other FF7 models I printed. The original model had a cape that was too thin to be printed. So I modified the model to…
Requires eight 12mm M2 self tapping screws to assemble. It's recommend to seperate the parts in your slicer. If you print it as-is they'll stick together. T-Beam_Supreme_midframe_buttons_update1.3mf contains some updates that make the…
- NO SUPPORTS NEEDED. Print as is (Thank you Alley Cat)!! - (2) M3 x 6mm Socket Head Cap Screws (BATTERY I USED) 504050 - 1500mah https://www.ebay.com/itm/387026120507 (GPS I USED) https://www.amazon.com/gp/product/B09LQDG1HY/ (ANTENNA I…
This is a model of Final Fantasy 7 Barret Wallace in simple polygon form. If you downloaded the other Cloud Strife Model, I mentioned I had to scale it to 15% when printing. For this model I ended up fixing his feet because they were not…
Collection of M3 female-female self-taping spacers I use for my own projects. ID:2.48mm OD: 5.0mm Length: 4-30mm Printed in resin. Did you like it? Please, leave a like and a comment. If you made it, share the make. :)
A polygonal bowl made using FreeCAD 0.20.1. The bowl is aimed to be printed using the vase mode of your slicer. The picture model size is 200mm x 100mm (full size of the STL file), printed at a 0.8mm width while using a standard 0.4mm…
This is a model of Final Fantasy 7 Cait Sith in simple polygon form. I printed this model at 15% scale. The wings and the cape are too thin to print. So there is another model that is just the wings and cape (that is already scale to…
Fidget Fun That Never Runs Out of Spring! 3D Printed Slinky Spring Fidget Polygon. Mesmerizing Coiling and Recoiling Action. Unique Custom Printed Design. Keep Those Hands And Minds Engaged! Please use 0.2mm layer height for the print,…
Broke the pegs on my toyota logo, so reverse engineered it and made my dual color version. Exact copy with the 3 pegs to make it click in. Just glue the parts together after printing. Like my work?? Please consider donating me a coffee :)…
This is a model of Final Fantasy 7 Yuffie Kisaragi in simple polygon form. I printed this model at 15% scale. Her ribbons on the back of her head are too thin to be printed so there is a separate model for those. The Ribbons are already…
No-supports version, perfect to print in PETG. Print instructions: Print in the orientation the STLs are imported Use at least 3 perimeter walls for strength (4 is even better) Supports are NOT necessary To assemble, just put all parts…
Modified Lilygo TTGO Lora case to include 1000mAh or 2000mAh batteries. In the future I'll include a place for a switch, as currently is always on, and the Meshtastic version for Lilygo TTGO Lora is not going to sleep when disconnecting…
If you LIKE this model PLEASE hit so I get credit, this will encourage me to make more models like this, thanks! Case for the LILYGO LoRa32 V2.1_1.6 Board and 18650 LiPo Battery. I used this is for the MySondy GO Project:…
The Lilygo T-Echo Meshtastic communicator, https://www.lilygo.cc/products/t-echo, comes in a case but all three important buttons are exposed to being accidentally pressed. This bracket protects the device from such accidental button…
Remix of a case for a Lilygo esp32 board, but with a mounting flange and case snaps. Use M2 screws for the bosses, the mounting flange holes are 4mm in diameter.
Commercial Use and Attribution Notice: TDeck Plus 8000mAh Back © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses…
24th December 2021: Thanks to everybody for all the nice feedback of my Vase design :-) I decided to created several new Versions of the Vase and renamed the hole project “Polygon Spiral Vase”. Now there are Versions with different…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 Support my work: https://ko-fi.com/modsmthng Latest update (12 June 2026): Reduced the screw hole diameters, increased the wall thickness…
Festool MFT Clamp System - Spanner für 20mm Bohrungen Unterschiedliche Polygone 80° Winkel 85° Winkel 90° Winkel Die Seitenlängen der Polygone betragen 25mm, 30mm, 35mm, 40mm, 45mm und 50mm.
I've always been a fan of the look of polygonal masonry, but it's hard to find (freely available) dungeon tiles. The ones I do find aren't as compatible with other tile sets I use. So I figure if I'd need to remix something anyway, might…
This Backplate / Bracket provides protection from accidentally hitting the two exposed buttons on the side of the device while also giving you a place to hook a carabiner or cord for easier carrying. The bracket was designed to contour…
By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…
This idea came from seeing several flat designs to hang on the wall. And what if we could give the same effect but in 3D, giving a different sensation depending on where we are looking? This is how the idea of creating this 3D model was…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Lilygo TDeck case for Meshtastic with a Battery, GPS Radio, LoRa Antenna. Full tutorial on how to build out the T-Deck can be found on YouTube here: https://www.youtube.com/watch?v=2PB-nGgZSpQ Parts Needed: 955565 5000 mAh Battery:…
This is a remix of krakers665's case . Changes from jeepers01's case : USB C slot instead of micro USB, so it fits lilygo T3-S3 Changes from krakers665's case : Enlarge LED indicator holes Add a light barrier between LED indicators Use…
Collection of M4 female-female self-taping spacers I use for my own projects. ID:3.96mm OD: 8.10mm Length: 4-30mm Printed in resin. Did you like it? Please, leave a like and a comment. If you made it, share the make. :)
A set of polygons/prisms to remix to make beautiful things. Use them to make your own model or decoration. You can find: Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Ennagon and Decagon. Feel free to like, download and follow.…
This is a remix of a great looking model of Appa from Avatar the Last Airbender by Alpha3dPrint . The original file wasn't able to print so I had to repair it in meshmixer prior to printing and I figured while I'm at it, let's make Appa…
A minimalistic NerdMiner/LilyGo T-Display S3 case. Print face down without supports. Insert the Display at an angle on the USB-C side, then lightly press down the other end to snap it into place. Don't press on the Display, it's fragile.…
Small case for the LilyGO T-CAN485 ESP32 board. Top held on by press-fit, bottom can be mounted to something using double-sided tape (don't print on a textured bed if you plan on doing that). Be aware that for CAN and RS485 the DC-DC…
A case for LILYGO T5 4.7 inch e-paper esp32 board, has the space to add a 3,7 Li-Ion cell battery. Print guide Print how is placed in the file, add brim and fill (20/15%). You can choose to add supports (i recommend) or not, but it will…
A simple yet cool case for T-Display-S3 ( link to produc t), without touch. I made it in FreeCAD and used the original step file as reference ( can be found here ). Just print the both parts (orient the top part flat on the bed in…
TPU case for the LilyGO T Embed & T Embed CC1101 since I couldn't find one! I suggest using TPU 95A or softer for the case if you have antennas/SMA connectors, since they do take some effort to put on. Otherwise, there shouldn't be too…
An enclosure for the lilygo T-CAN485 with visible LED and access to boot and reset buttons. A holder for the enclosure with cable management and a hook to attach the assembly to a Marstek Venus battery.
I designed this case for the "Lilygo T-Display-S3 Touch Development Board" which features a 320 by 170 color display and a touch screen. I'm planning on using this board in upcoming projects and decided to create this case for it. In…
Edited https://creazilla.com/nodes/74126-venus-kalyppigos-3d-model Print Settings Printer: Kywoo 3D Tycoon Rafts: No Supports: Yes Infill: 15
flask with polygons update · added STLs design inspired by traditional clay honey containers from the south of Portugal photo shows print with: 0.16mm layer height 15% gyroid infill no brim or supports printing in 0.16 instead of 0.20…
This is a case for the LILYGO® TTGO T5-4.7 Inch E-paper display ( https://www.lilygo.cc/products/t5-4-7-inch-e-paper-v2-3 ) together with a stand. Please note that this design is only compatible with the “v2.3” or “plus” variant of the…
I found the knob to slippery so made a simple grip ring.
Printer: Ender 3 MAX Infill: 15(not needed) Quality: 0.16mm Printing Time: around 13 hours Size: (H: 17-18cm W: 14cm L: 12.5cm; fits perfectly on a “average” Human head(tried it on my 14 yr old brother and it did also fit very well ))…
Inspired by Valve's deep dive into the engineering work behind Index off ear headphones, the OE1 project aims to bring similar audio solution to Oculus headsets. Currently supporting Quest 2 factory soft strap, Elite Strap, Halo Strap and…
Check out my Amazon Page to see what kind of gear I use to make these models! A Pokémon that consists entirely of programming code. Capable of moving freely in cyberspace. The original Low Poly Pokemon! I made this model while…
This is a remix of the thingiverse model with more space for the battery and a few little modifications. Most of the modifications where done in PrusaSlicer and can easily be modified. I also changed the size of the holes for the magnets…
Ultimate Polygon Star Fidget Collection From the mystical 5-pointed Pentagram to the intricate 12-pointed Dodecagram — a complete set of 8 mesmerizing star-shaped fidgets. Description Elevate your fidget game with this stunning Ultimate…
An enclosure for the LILYGO Meshtastic T-Beam ESP32 TTGO Development Board with LCD and rear mounted 18650 battery mount. Requires four (4) 16mm M2 screws. OpenSCAD file requires BOSL2 (https://github.com/BelfrySCAD/BOSL2) and nutsnbolts…
Update November 11, 2024: Included f3d file to make it easy to remix. This is where Magna-tiles meets K'nex. Build your geometrical shapes without worrying about it falling apart on you! I was playing with magna-tiles with my 3-year-old…
So this remix on Thingiverse is actually from a design on Myminifactory. https://www.myminifactory.com/object/3d-print-blink-fox-dice-tower-108734 The design on Myminifactory credits Jukka Seppänen's Blink Fox. But I don't care about…
I thought a skull would be a good model to experiment with, for my first time making low polygon art with Meshmixer and Meshlab. Also, I wanted a functional and eye catching vase/drinking cup. The print you see in the picture has been…
Simple mount to sit on the dashboard. Fits the current type of iPhones (with or without a regular cover) iPhone 12 iPhone 13 iPhone 14 iPhone 12 mini iPhone 13 mini Fits the current type of cars Toyota Aygo (2005-2018 model) Citroen C1…
(Updated February 2022 with several improvements and simplifications thanks to .benjamin. ) While using Jamie_K's geodesic icosahedral sphere in OpenSCAD, I ran into some issues: A sphere based on an icosahedron doesn't have an equator,…
Polygon Mask - Voronoi Style The mask is double walled. If you like a single walled version, check out thing 191652. http://www.thingiverse.com/thing:191652 Or check out this mask, it should be easier to print:…
The Everygon Vase Collection - because every polygon is the bestagon! This is a series of parametric flower vases designed for spiral vase mode printing. They are designed of a series of polygons of decreasing number of sides lofted…
Two kinda like designs. One with ring, other in a polygonal way This woggle or Scarf Ring represents the worldwide friendship among Guide and Scout movements. On one side, it's got the global Scout fleur-de-lis, and on the other, the…
A belt clip for the T-Deck Plus (the version of the T-Deck that comes in a case). I primarily wanted a belt clip so I could put it on a bracket or stand. Print the belt clip on its side for maximum strength, supports are required. Print…
Here is a case for a Lilygo T-Display S3 (without header pins) Files include: .STL + Fusion 360 source (.fd3) + Prusa Slicer .3mf file case was made in support of this project: https://rlatour.com/cpumonitorjr/ Hope it will be of use to…
I needed something to complete my decor on the wall. A low poly heart perhaps. Found a great model from another fellow creator, but it was a complete 3d model. I was looking for something with a flat base so that I could mount it. So I…
It's a polygon heart with organic support as decoration. You can create your own organic-style supports in PrusaSlicer or other slicer software. Here are my support settings: Unfortunately, it is not possible to print it without infill,…
Lilygo T5 4.7 S3 E-paper (NO TOUCH) screen case with stand