3,494 models
I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
Print approx. €3.98–€4.86 excl. taxPreliminary estimate for PETGSource material: PET
RC TATRA 805 !! Zjistil jsem že zadní ramena nesedí a bohužel se špatně nahráli, pracuji na opravě chyby, také bohužel nemám čas na zpracování návodu tak přidám alespoň nějaké fotky ze stavby v případě nejasností mě neváhejte informovat.…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
A spare wheel for the Husqvarna Automower 305. Since the originals are too expensive I have drawn this replacement. I hope that it is durable and also copes well with slopes. But that will show over time. Rim and profile are screwed,…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
This is a new design of the venturi nozzle V04. If you tested the older version too, please tell me which is best. With this print you can upgrade your normal compressed air gun to a gun with a venturi nozzle. This design is for a…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
A 3d printed case for the popular DPS5005 running OpenDPS. I CNCed the side panels from a 1/8in acrylic panel. You can also 3d print them if you want. Follow the Datasheets to get the correct connector housings and terminals to interface…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
Have used PLA. You can use sand paper on top of rail if wanted. My mission was to create easy to use and build train rails. Save filament Fast print Make lots of track quickly Play and have fun Found out you need to dismount double boogie…
Print approx. €3.35–€4.09 excl. taxPreliminary estimate for one variant
Bought a used HEMNES bed that was missing a bunch of these 110525 pins. Printed in two parts and then squezed together. Printed on Anycubic Kobra Neo with 0.4mm nozzle in PLA.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
This is a holder for Knipex pliers for the Ikea skadis pegboard, printed in one part. It fits Knipex model 70 15 110 and Knipex model 08 05 110 I designed this model completely new from scratch, but it is inspired by Aaron s Knipex holder…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET
Here's my design of a Clearance and Tolerance 3D Printer Gauge . Drawn in Fusion 360 Print instructions ¤ Use .3mf or .gcode for presliced settings. ¤ Print in Prusament PETG Galaxy Black and Prusament PETG Signal White ¤ Use Prusament…
Print approx. €1.63–€2.00 excl. taxPreliminary estimate for PETGSource material: PET
Downloaded a mount and hated the print so I designed my own. Fits like a glove. If your printer isn't finely tuned, I'd probably experiment with 101-102% scale printing. I just printed it at 2 shells and 10% infill using Prusament PLA…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
The lock system for cover for Meicho Versus fishing boxes. Use magnets in caps 10*6mm Print instructions Use the 0.15 layer height or lover. Your can print with 0.2 layer, but thread is not cool quality.
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
This print marks my first exploration into the fascinating world of 3D-printed “fabrics.” It’s a small chainmail segment made of slightly curved, interlocking rings designed to move freely without tangling. The goal was to find a balance…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Power supply using two DPS5005 units, and a 48V DC power supply unit. It requires a handful of other components that you can easily get from a local electronics store or on line (binding posts, power inlet etc) The PSU is an S-500-48.…
Print approx. €5.81–€7.10 excl. taxPreliminary estimate for PETGSource material: PET
These are some short feet for a Rigol DS1054z (or any, I'm guessing, in the 1054 family). I had been using some taller feet that were great, but the extra height got in the way of my tool storage wall behind it. These slip on easily over…
Print approx. €2.63–€3.22 excl. taxPreliminary estimate for PETGSource material: PET
This is a somewhat parametric tilt stand for a DPS5005 power supply case like this one: https://www.amazon.de/gp/product/B077NZF6DZ The included STL has a 17° angle, and 15 mm extra vertical lift, which is perfect for my case. The…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
model of ammo
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
Small enclosure for the DPS3005 / DPS5005 or any other DPS without extra PCB. I used M3 injection nuts to fix the back cover and safety banana sockets to be able to use multimeter probes. On the backside is a DC power socket . The M3…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
Cool and ergonomic stand for a popular smart watch Xiaomi HAYLOU Solar (LS05). The stand can be printed with or without supports. For this, several options for STL files are provided. ls05-A.stl and ls05-B.stl - are not require support.…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
Tisk s podpěrami , na dvě poloviny, výplň 10%, PLA.
Print approx. €4.16–€5.08 excl. taxPreliminary estimate for one variant
Mouse case consists of two parts - base and cover . Magnets are used in this model 5mm diameter 5mm height 4pcs for cover 5mm diameter 2mm height 4pcs for base (pause necessary to insetr magnets) CHECK POLARITY BEFORE PUTING MAGNETS IN…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for PETGSource material: PET
Tisk na dvě poloviny, PLA, podpěry, výplň 10%, tryska 0,4.
Print approx. €3.83–€4.69 excl. taxPreliminary estimate for one variant
Print approx. €4.59–€5.61 excl. taxPreliminary estimate for PETGSource material: PET
Retrofit of window regulator 6205-25-016821P, used for WV / Audi. Printed mine in PTEG with supports, although the supports can be tricky to remove inside the small gap. Clips easily onto frame and was easy to mount correct. Included the…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
Case need Support 10% Infill
Print approx. €2.58–€3.15 excl. taxPreliminary estimate for one variant
Print just like regular Prusa parts. Fits the frame just like the original. You need two extra M3 screws to mount the module.
Print approx. €3.71–€4.53 excl. taxPreliminary estimate for PETGSource material: PET
Hier habe ich für den MowBest 805 ein Satz Ersatzreifen erstellt. Die Reifen habe ich mit einem Prusa MK4s und einer MMU3 gedruckt die Felge mit PLAx CF von Nobufil und die Reifen mit TPU. Kann auch komplett aus PETG/PLA gedruckt werden.
Print approx. €16.93–€20.69 excl. taxPreliminary estimate for one variant
Printed successfully on MINI+ from recycled PETG with 100% infill. Works magics.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
I've received a N5105 mini pc from a friend, but the rubber pads at the bottom was missing. Instead of trying to source rubber pads, I've come up with this stand. The goal was to lift the unit from the surface it's placed on, to stop the…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Modely WK konektorů (Tesla Československo) / Models of WK connectors (Tesla Czechoslovakia) Jako ukázka tu je GCODE obou v 500% velikosti / As an example, here is the GCODE of both at 500% scale. POUŽIJ 3MF NE STL / USE 3MF NOT STL…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
This is a mount designed for the Hamamatsu C10508-01 Avalanche Photodiode (APD) module . The purpose of the mount is twofold: 1) to enable the integration of the APD module into optomechanical setups; and 2) to provide a protective cover…
Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant
Ich wollte meiner KitchenAid ein Leiseres auftreten spendieren.
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
The part contains two parts, you need to apply acrylic glue and slide them together.
Print approx. €3.32–€4.05 excl. taxPreliminary estimate for PETGSource material: PET
Fits the Anker Power Port model A2056 charging station https://www.amazon.com/dp/B072K5ZJXF/ This mount station allows you to firmly hold the charging station and then remove the gate to release the charging station. I have included the…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for PETGSource material: PET
Hier präsentiere ich euch meine erste selbst designte AEG Z1311005 Akkuwandhalterung. Ich habe sie mit dem SUNLU MetaPLA in schwarz gedruckt. Layerhöhe: 0.25mm Draft (Profile Prusa MINI/MINI+) Infill: 15% Infill-Struktur: Gyroid…
Print approx. €9.78–€11.96 excl. taxPreliminary estimate for one variant
Lost the lens cover for my Bosch thermal camera so I decided to recreate it based on photos and share it here in case anybody else needs it. It fits perfectly and follows the original design as closely as it can. There is, however, an…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Simple replacement latch for an ArtBin model number 83805. PETG is suggested for a mixture of strength and flexibility. Support everywhere is required, but easy to remove.
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
For optimal storage of the foam injector on the high-pressure cleaner, this mount was developed. The foam injector is inserted horizontally into the mount and locked in a vertical position by rotating it 90°. This ensures that the foam…
Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant
Introduction This model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm , ⌀205mm (this upload), ⌀150mm ,…
I ran out of fidget toys i really enjoy. An obviously highly critical situation! That's why i started to design my own ones, which resulted in a series of five similar but still quite different fidget toys using helical gears. The series:…
My Bambu X1C vibrates quite a lot which means sometimes the bucket is being pushed away. When that happens I find filament everywhere on the table. That's the reason why I made this Remix. If you already printed a bucket without cutouts…
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
01 - Summary A simple reusable tie fastener to organise cables and other long objects. It features 1-12 holes with lengths 40-205mm for great versatility. Unlike other cable ties, this puts ease of use first, with a simple fastening and…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
2026/03 update: Resize holes so screws can fit and grip better. Added new models for XL4005 and other variants. It's 1mm longer and have different board screw position. ===== 2024/12 update: Added a new v2024.12 with these changes: Even…
hello friends, I'm Vlad-3d designer from Ukraine , I got this idea and I really want to implement it, first of all, this product is aimed at premium materials and I want to implement it as a final product, but I will also share the final…
These strong, reusable plant stakes are designed to help support stems and keep plants upright as they grow. Whether you're dealing with seedlings or mature plants starting to lean under their own weight, these supports offer a clean,…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Requires:Original G305 PCB, Scroll, Side Buttons and Screws. Requires 4* 5mm Diameter 3mm Depth magnets. Requires 4* 5mm Diameter 3mm Depth magnets. (may need glue) rotate top -55 degrees, rotate Rear 90 degrees. If you enjoy this mouse…
FINALLY FINISHED I've tested the final version of this mouse for a couple months now and I'm convinced it is pretty much as good as it will get. Enjoy! Background Story This Model was initially made for school and then continued in my…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
This is a mockup of the TP4056 USB C Battery Charger Li-ion Module for further case designs sizes and dimensions have been measured carefully If this helped you, please leave a like! That's my reward and payment! 👍 I ll be happy to get…
I recently got hold of a couple of notebook batteries... ... So I needed a battery charge and test setup. I build a charger holder around my battery booklet thing: https://www.thingiverse.com/thing:4113164 This adds a piece for the TP4056…
You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…
Full instruction writeup on instructables: https://www.instructables.com/Razer-Viper-Mini-Wireless-Mod-G305/ It will likely ask you if the baseplate file should be separated, it should not be. I can no longer combine the bodies in Fusion…
This model is compatible with the lego system.
These are printed accessories for adding LED light bars to the Flashforge Adventurer 5 (AD5M) printer. Printing info: Print as oriented No need of supports. The LED “mount” bars were printed on the AD5M. The longer parts have to be…
Protective case designed specifically for the TP4056 charging circuit. Featuring a entry point for USB cable, a dedicated exit for power cables, and a secure pressure fit design. With this circuit things can get quite hot so i designed it…
UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…
⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs. JERRARI3D.com The GEN2 Filament Drawer is a great way to record and…
Accurate measuring tools are essential for successful 3D printing of anything that mates with anything else. While these calipers aren't as accurate as the real McCoy, they are handy when your Mitutoyo's are hiding elsewhere. They have…
Einfacher Kantenschutz für die navimow i Serie. Sie sind straff entworfen, so dass ein Aufstecken genügt. Es ist kein Schrauben oder Kleben erforderlich. Ich habe mit PETG gedruckt / 100% Infill
Assembly Video: https://youtu.be/swuw8Jnv1ro *if you have trouble downloading the file, please check another download link I provided in the YouTube video description note : 11.10.24 update headballslotv2.stl - deeper ball socket STL and…
LogitechG305 Mod compilation. You will find everything you need to fully modify your G305 and tinker with it to your hearts content… or maybe just create your own mods :D Update 2022.7.6 : Added more mods including an insane 20-30gr mod…
The CF-105 Arrow was a supersonic interceptor developed in the 1950s. I love this beautiful plane and I felt a need to model it, despite having no idea how to model such complex shapes. Please read on to learn some history and to learn…
This is an enclosure for the Arducam 1080P Day & Night Vision USB Camera Module (SKU: B0205) which is a nice camera USB with auto-switching infrared night vision. The back of the enclosure has a mount that works with the Modular Mounting…
In case you want to design a part that includes a tp4056 charge controller.
This model is compatible with the lego system.
A pencil/pen vase for decorative purposes to hold pens and pencils, or anything else. It is 112mm tall and 91mm wide. The photo shows the vase printed in vase mode with 3 bottom layers. It can be printed in normal mode with 0 top layers…
Take off the useless sunvisor, use this to fill the hole! Uses the factory screws. 1990 - 2005 Miata / MX-5 Print it in PETG, ABS, or ASA. Do not use PLA for this, especially in warm climates. Enjoy! Check out my webstore:…
This model is compatible with the lego system.
Have the burning desire to conquer the skies? Then you're not alone. The pioneers of aviation risked their lives to learn how to control their barely flying contraptions. You don't have to risk yours to re-imagine their early feats with…
Gusset Bracket - 2020 / 3030 / 4040 / 5050 Profile Suitable for: 2020 -3030 -4040 -5050 V-Slot T-Slot Alu profile 20x20x20mm 30x30x30mm 40x40x40mm 50x50x50mm Resize to adjust dimensions All our designs are free to download and use—because…
As you can see in the pictures, this is a two part design. You will need to print the mounting clip and the actual cupholder. The clip is mounted in the passenger footwell by removing the forward screw on the center console near where the…
A sturdy 10-inch rack mount adapter for one or two TP-Link SG1005P. Also works with the SG105. To install the switch, simply slide it in. However, if you already added the rubber feet, remove them before installing the switch in this…
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
Remix of Stamos' case for the Raspberry Pi 3. Made for the Libre Computer AML-S905CX-CC (Le Potato) SBC that has the (mostly) same layout as the Raspberry Pi 3+. This is set up with a hole for the IR receiver as well as indentations for…
🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…
A holder for the TP4056 lithium Battery charging board (25*19mm). UPDATE:2018/10/01 V2 Fits most of TP4056 boards. Fits most of 18650 batteries with protection circuit. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill:…
Update! Due to popular demand i have released the step files for easier modification. Parts: Psu module: https://s.click.aliexpress.com/e/_oDMk7jQ USB-C pd board: https://s.click.aliexpress.com/e/_oDtVUnE Banana plugs:…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
A grit guard sits in the bottom of your wash bucket in your wash solution. It allows the dirt and debris that gets stuck to your wash sponge/mitt/towel to fall through the grate and rest in the bottom of your bucket preventing…
Forgot to add holes to the model, you can add them in lychee slicer using the hole tool. Edit: Uploaded a updated Model with holes for a strap aswell as reducing the length in the back for better fit and comfort.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I was looking for something to help nurture my 10-year old budding artist…
Originally published here: Samsung Galaxy A20 & A30 & A30s a205 a305 a307 case by tato_713 - Thingiverse This case is for the Samsung A20 phone (models started with a205), for the A20s (a207 models) look here . This case was tested on the…
HOW TO INSTALL PROFILES The file includes a 0.12, a 0.16 and a 0.2 layer hight profile. It have been working great for me and have just made some new tweeks and uploaded the newest version (v2.1) New V.3.3 with PETG, PLA+ and SILK -…
Anycubic Kobra / Kobra 2 / Kobra 2 Pro - Toolbox 04 Toolbox with two drawer and top Software: PrusaSlicer 2.7.1 Printer: Anycubic Kobra 2 Pro Infill : 15% Brim : yes Skirt : No Support : yes First layer height : 0.24 mm Layer height: 0.2…
Sharing my custom 3D enclosure design for the Lenovo M90q Gen 1, featuring the MSI RTX 3050 LP, a 3.5-inch LCD screen, and an RGB fan. This project involved designing the 3D case model using SketchUp and printing it with PETG filament on…
07/17/2023: 0.6mm Nozzle First Layer Tips! Read below on how to get rid of those gaps/crevices in your first layer when using 0.6mm nozzles. The following was performed on the 0.2mm Layer Height Profile. Manually increase your z-probe…
With this design you can mount your TP-link ER605 and OC200 the proper way. You wil also need the Ubiquiti Networks ER-RMKIT. I used M3 10mm screws to screw the printed parts together.
I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, skill, and CAFFEINE! ;-) And then check out my other models for…
SCP:SL 05 Keycard The QR code should work and it will detect you to the scp wiki Filament: PLA (black and white) Supports: No Infill: 100% You will need to add a color change on the on the ninth layer or the layer that the graphics appear.
Originally published here: Motorola Moto G72 G82 & Edge (2022) xt2205 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay…
Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang
This model is compatible with the lego system.
NEW VERSION WITH FRONT COVER IS AVAILABLE HERE: https://makerworld.com/es/models/2585450-icom-ic-705-shield-v2-front-cover#profileId-2852226 Icom IC-705 protective shield. Available as single part or 2 parts for smaller 3D printers. For…
Designed completely from scratch around ICOMs STL Model of IC705. It was printed and improved in at least 5 iterations until it was release-worthy. Housing is a tight fit and should protect IC705 in outdoor use from all sides without…
Mounting Plate for the SpeedyBee F405 Wing MINI. Makes It Easier to remove FC by only gluing down Base Plate to Aircraft
![Display Stand for LEGO Star Wars Microfighters and Polybags [last update 27.05.2025] / 75400 75391 75344](https://media.printables.com/media/prints/427956/images/4197916_10ccaadf-5adf-459c-923a-defcc0d5886b/img_20230702_152357.jpg)
